So I have gone through and set up my alarms using the default "Alarm & Clocks" app.
I give it 10 snoozes of 10 minutes each (or any time interval).
I set the snooze check box.
My alarm goes off at the correct time. I slide the snooze graphic across the screen and then 10 minutes later it goes off again. Good.
If I bump or shift my phone while trying to hit snooze it turns off the snooze, much like if you hit "dismiss" or "cancel". This is a feature?
Now, I do not know about anyone else, but I tend to not have fine motor control at 5 am. This has happened to me so many times since I got this phone. The best part is that it gives you no warning that it does it. You slide over the snooze button and think you are golden. But, in fact, you have turned off your alarm. It is not listed anywhere in the documentation or in the app.
How do I disable this functionality?
Are there better alarm/clock apps?
What the hell is "Smart Alarm?"
Related
I set the alarm clock for waking me up. Every morning when it rings, I pick up my phone and the rings stop and it snooze for 10 mins AUTOMATICALLY. Any body have the same issue. Anyone knows how to solve it? Thankyou very much.
What do you mean snooze automatically ? I Also put alarm everyday & when it rings i down unlock screen once so, it won't snooze anymore .. but if you click on snooze button than again it will snooze automatically also you can change snooze settings from alarm menu ..
maheshpatel said:
What do you mean snooze automatically ? I Also put alarm everyday & when it rings i down unlock screen once so, it won't snooze anymore .. but if you click on snooze button than again it will snooze automatically also you can change snooze settings from alarm menu ..
Click to expand...
Click to collapse
That's means I just pick up my phone without touching anythings but it stops ringing and snooze automatically. Do you understand now? Thankyou very much.
Oh Got it .. well, i never had this kind of problem.
I like how on Sense 3.5 my Outlook Calender reminders pop up full screen on the lock screen, however, when I drag the 'snooze' button to the lock ring, i never get another reminder again (snooze doesn't work).
Under settings on my Calender, it looks like it's set to default to a 10 minute reminder.
Anyone else having this issue? And any idea how can I get this working correctly?
(I'm wondering if it works with Google calenders (which I do not use) and not with Outlook or something...)
Is this Calender lockscreen snooze button working for you? If so, what version of Outlook do you use? Mine is '03.
I just came from the Evo3D and the same problem there. I have installed Caladar Snooze
https://market.android.com/details?id=com.bitfire.development.calendarsnooze
Which is free, and this is something that I now cant live without. Works flawlessly. When a caladar event comes due I hear a reapeating reminder and when I open my phone I get a full screen with options to snooze for minutes to days and its quick to select and no worries cause it works and will remind you, not like the stock snooze.
I liked it so much I bought the Key
The UI is something less to be desired but very reliable so far and have had it for 5 months
How does Calendar Snooze play with the built-in calendar alerts? Do you have to dismiss two notifications? (i.e., does the lock screen alert still appear?)
good question. When an alert comes up you dont see the stock snooze lock screen. you see the calandar snooze in the notification bar and after you unlock the full size menu screen pops up and you have to make your choice, 5 min, 1 hour, until, for, dismiss
Just to further answer my own question: Calendar Snooze has a setting to appear on top of the lockscreen and wake the phone when it alerts. Still have to dismiss the lockscreen if you want to access the rest of the phone.
I've got a few of these up and running flawlessly now so I understand how they work. I'm trying to create one of these for my bedside and having a bit of a problem doing a couple things that I'm trying to do.
First off, is there a way to make the tag a toggle of all adjustments? In other words, I want it to silence the ringtone & notification tone and turn vibrate off amongst other things and then enable them again in the morning with another swype of the same tag. I thought I read somewhere how you could do this but I'm not seeing the option(s) in NFC Launcher now.
Also, I'm having a difficult time getting it to launch the alarm clock app. I can have it launch the clock but then it takes a few more steps to get the alarm clock armed. Using an older version of the Clock that comes with previous versions of Android and Launcher Pro I can create a shortcut on my homescreen that takes me right into the alarm with a single press. Using this knowledge I select 'launch app' from within NFC Launcher and tell it the app is 'Clock' and then under that is a field for what within the app you specifically want to launch. I've tried 'Add alarm' which is the exact verbiage of that screen and nothing happens. I've even tried the text of the option I select from the homepage shortcut I created which is 'com.android.alarmclock.AlarmClock' and that also does nothing. I know the possibility is there but I can't seem to get it to work.
Lastly, if I'm unable to get the alarm clock launch to work as described in the previous paragraph another option would be the 'Alarms' section within NFC Launcher and then the timer one where I can set an alarm for 8hrs from whenever I scan the tag. This would be perfect but nothing I do disables the vibrate and I HATE the vibrate going off with my alarm because it's so loud and startling. I prefer a quiet audible alarm sound since I'm such a light sleeper. A phone rattling loudly on my nightstand jolts me into fight or flight mode... not a great way to start your day.
OstrichSak said:
First off, is there a way to make the tag a toggle of all adjustments? In other words, I want it to silence the ringtone & notification tone and turn vibrate off amongst other things and then enable them again in the morning with another swype of the same tag. I thought I read somewhere how you could do this but I'm not seeing the option(s) in NFC Launcher now.
Click to expand...
Click to collapse
You'll want to use a switch tag for this.
OstrichSak said:
Also, I'm having a difficult time getting it to launch the alarm clock app. I can have it launch the clock but then it takes a few more steps to get the alarm clock armed. Using an older version of the Clock that comes with previous versions of Android and Launcher Pro I can create a shortcut on my homescreen that takes me right into the alarm with a single press. Using this knowledge I select 'launch app' from within NFC Launcher and tell it the app is 'Clock' and then under that is a field for what within the app you specifically want to launch. I've tried 'Add alarm' which is the exact verbiage of that screen and nothing happens. I've even tried the text of the option I select from the homepage shortcut I created which is 'com.android.alarmclock.AlarmClock' and that also does nothing. I know the possibility is there but I can't seem to get it to work.
Click to expand...
Click to collapse
That field is for the activity (so package.activity). However Google's new packages have different class names than their activity names (thanks for that by the way). The Alarm clock is com.android.deskclock.AlarmClock - however this probably won't launch right now. It will in the next update (it's working for me without a problem here on what will be the next release). Support will also be in place for class/activity notation so you could pass in com.google.android.deskclock/com.android.deskclock.AlarmClock and not worry about it (Although this will require more space on the tag).
OstrichSak said:
Lastly, if I'm unable to get the alarm clock launch to work as described in the previous paragraph another option would be the 'Alarms' section within NFC Launcher and then the timer one where I can set an alarm for 8hrs from whenever I scan the tag. This would be perfect but nothing I do disables the vibrate and I HATE the vibrate going off with my alarm because it's so loud and startling. I prefer a quiet audible alarm sound since I'm such a light sleeper. A phone rattling loudly on my nightstand jolts me into fight or flight mode... not a great way to start your day.
Click to expand...
Click to collapse
I don't know about vibrate. All I do is pass the intent off to the alarm handler and tell it set an alarm for X:YY time and it handles the rest. There aren't any public extras to pass with the intent to set vibration or sound preferences. I could look at the actual alarm clock source and see if it accepts any, but that is likely device dependent and wouldn't work on skinned devices.
Thanks for the quick response!
krohnjw said:
You'll want to use a switch tag for this.
Click to expand...
Click to collapse
So, this is a special type of physical tag that one must buy? I bought ten of these and they seemed like decent tags but it sounds like this may not work or are you talking about some software adjustment I'm just not seeing?
krohnjw said:
That field is for the activity (so package.activity). However Google's new packages have different class names than their activity names (thanks for that by the way). The Alarm clock is com.android.deskclock.AlarmClock - however this probably won't launch right now. It will in the next update (it's working for me without a problem here on what will be the next release). Support will also be in place for class/activity notation so you could pass in com.google.android.deskclock/com.android.deskclock.AlarmClock and not worry about it (Although this will require more space on the tag).
Click to expand...
Click to collapse
So, what I'm doing currently is right, it's just that it's not fully propagated on the app's end and will be by the next update.... correct?
krohnjw said:
I don't know about vibrate. All I do is pass the intent off to the alarm handler and tell it set an alarm for X:YY time and it handles the rest. There aren't any public extras to pass with the intent to set vibration or sound preferences. I could look at the actual alarm clock source and see if it accepts any, but that is likely device dependent and wouldn't work on skinned devices.
Click to expand...
Click to collapse
My settings via your app on this particular tag is to turn the vibration of the phone off but I think that the alarm clock overrides this as well as a silent setting to play a tone for the alarm. I looked for a setting to disable the vibrate within the Clock but am not seeing it. I can for the alarm but not for the timer which was plan B as described above.
In the app, new tag -> new switch. Same physical tag.
A switch tag toggles between two task tags.
Sent from my Galaxy Nexus using xda premium
krohnjw said:
In the app, new tag -> new switch. Same physical tag.
A switch tag toggles between two task tags.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
aHA! That's where it was.
As an example I'm going to make a Toggle to do the following:
Night mode
Ringer: Silent
Notification: Silent
Vibrate: Off
Notification light: Disabled
Morning mode
Ringer: Enabled
Notification: Enabled
Vibrate: On
Notification light: Enabled
Now, the question is about the clock. I realize I will be able to launch it with a setting but can I have it disabled (say I wake up before my alarm) and can I put both of these on a Toggle switch? So on the first swipe it launches the clock and on the second swipe it disables it?
OstrichSak said:
aHA! That's where it was.
As an example I'm going to make a Toggle to do the following:
Night mode
Ringer: Silent
Notification: Silent
Vibrate: Off
Notification light: Disabled
Morning mode
Ringer: Enabled
Notification: Enabled
Vibrate: On
Notification light: Enabled
Now, the question is about the clock. I realize I will be able to launch it with a setting but can I have it disabled (say I wake up before my alarm) and can I put both of these on a Toggle switch? So on the first swipe it launches the clock and on the second swipe it disables it?
Click to expand...
Click to collapse
As far as I'm aware the alarm clock handler doesn't take an incoming intent to disable an alarm (I looked at the source some time back to resolve getting it auto set in ICS). It might be possible to directly edit the alarms database, but there's no guarantee this will work on any device that's not an AOSP based device (Since HTC likes to make arbitrary modifications sometimes) so that might not get implemented as it would just be potentially broken on a lot of devices. I'd have to take a look into those data stores though.
krohnjw said:
As far as I'm aware the alarm clock handler doesn't take an incoming intent to disable an alarm (I looked at the source some time back to resolve getting it auto set in ICS). It might be possible to directly edit the alarms database, but there's no guarantee this will work on any device that's not an AOSP based device (Since HTC likes to make arbitrary modifications sometimes) so that might not get implemented as it would just be potentially broken on a lot of devices. I'd have to take a look into those data stores though.
Click to expand...
Click to collapse
Sounds like more trouble then it's probably worth. I can just put 'Launch app' 'Clock' in both activities and then manually activate and deactivate as needed. It would be cool to have it 100% automated but I don't know how necessary that's going to be.
Now I just wish I could figure out how to disable the vibrate from the stock timer so that I can set a toggle to have it go off 8 hours from when I swan the tag as my alarm clock since I don't go to work and always set my alarm for 8hrs from when I go to bed. Most of the time I wake up before it goes off so this is why having it disable with a scan of a tag would be ideal but I realize this could be more effort than it's worth. I'm just scratching the surface on what I can do with these tags so I'll just test out what all I can do with them as they stand.
When do you think that update will occur so that I can launch straight into the alarm clock rather than launching the Clock and having to take another step to get to what I want to get to?
OstrichSak said:
Sounds like more trouble then it's probably worth. I can just put 'Launch app' 'Clock' in both activities and then manually activate and deactivate as needed. It would be cool to have it 100% automated but I don't know how necessary that's going to be.
Now I just wish I could figure out how to disable the vibrate from the stock timer so that I can set a toggle to have it go off 8 hours from when I swan the tag as my alarm clock since I don't go to work and always set my alarm for 8hrs from when I go to bed. Most of the time I wake up before it goes off so this is why having it disable with a scan of a tag would be ideal but I realize this could be more effort than it's worth. I'm just scratching the surface on what I can do with these tags so I'll just test out what all I can do with them as they stand.
When do you think that update will occur so that I can launch straight into the alarm clock rather than launching the Clock and having to take another step to get to what I want to get to?
Click to expand...
Click to collapse
Probably next week. I have some translations to get completed before releasing.
Sent from my Galaxy Nexus using xda premium
krohnjw said:
That field is for the activity (so package.activity). However Google's new packages have different class names than their activity names (thanks for that by the way). The Alarm clock is com.android.deskclock.AlarmClock - however this probably won't launch right now. It will in the next update (it's working for me without a problem here on what will be the next release). Support will also be in place for class/activity notation so you could pass in com.google.android.deskclock/com.android.deskclock.AlarmClock and not worry about it (Although this will require more space on the tag).
Click to expand...
Click to collapse
To revisit this... the way I came up with 'com.android.alarmclock.AlarmClock' was because I was Googling a way to make a shortcut on my homepage to launch right into the alarm clock. I found one but it used an older version of the DeskClock which I recovered from an old backup from Titanium Backup. It works great as a homepage shortcut but is there a way I can make a shortcut using the new clock? If I can I can delete the older style Desk Clock I had to install and then when the new update to your app comes out I can use that to go right to it. I also just noticed that in the new clock there is an option for: 'com.htc.android.worldclock.alarmclock.DeleteAlarm' so maybe the automatically disabling is possible or will this delete an entire Alarm profile? Since you seem to know WAY more about these clocks than I do is there a way to get with the new clock what I've done using the old clock? I mean the 'com.android.alarmclock.AlarmClock' shortcut... does that exist for the new one? I tried different ones that looked like they may be the right one but it wouldn't launch at all.
Hopefully you understand the way I explained all of this. If not I can try to elaborate whatever parts you don't understand.
Edit: BTW, here is a list of the possible choices and all start with 'com.htc.android.worldclock...
WorldClockTabControl
Relaunch*
TimeZonePicker
DeleteTimeZone
RearrangeTimeZone
SetAlarm*
DeleteAlarm
AlarmAlert*
OffAlarmAlert
HandleSetAlarm*
TimerAlert*
SettingsActivity
SoundSelect
The ones with an asterisk are ones that I've tried to create a shortcut on the homepage using 'Add>Shortcuts>Activities (this requires Launcher Pro)>Clock and then I can choose what action within the app. This is how I was able to set a homepage shortcut using a previous Clock app and if I can figure out how to do the same thing with the new Clock that comes with ICS I will delete the old clock I installed and then use this information moving forward once the NFC app is updated.
krohnjw said:
Probably next week. I have some translations to get completed before releasing.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Thanks.
Coming from a LGv20, where I used the following combo: Cute little bar at the top showed time & an icon for missed notifications (similar to the Always On Display), and an app called Dynamic Notifications.
The idea on the 2 of those, was: If I got a notification while I was able to look at my phone, Dynamic would show it to me, along with a preview of what the message is. You can slide to open it, ignore it for now, or delete it (depending on the app). If I wasn't looking at my phone, I'd at least see an icon on the top bar so I knew to go look.
AOD does fine for the time & you missed a notification, but when I get one, and my phone is sitting next to me, it's annoying to unlock the phone to check the notification.
Sadly, AOD & Dynamic notifications don't seem to work well together.
--
Now when the phone is on, I'm not getting my heads-up notifications, and I don't know i the LG did it on its own..o what. So I'm using an app called Heads-up at the moment. Heads-up also has a turn-on-phone feature, so I'm testing it and AOD display as a combination.
Oddly though, Go SMS isn't working with Heads-up, and I'm not always getting the Go SMS built in popup.
---
SO.. what is everyone doing for notification, both with phone on & off?
One last thing - edge lighting - looks neat, but I never put my phone face down. Would kind of kill AOD anyway, no?
There were a slew of notifications on my phone earlier, and I just hit the "clear" button at the bottom to make them all go away. Turns out one of them was for an upcoming alarm I had set and didn't notice, and apparently clearing the notification dismissed the alarm so it never went off. (I'm running the standard google "clock" app since I'm used to it, not the samsung clock app).
Any way to prevent an app notification from being cleared? Any way to remove the "clear" button from the notifications? Any better clock app that doesn't have this problem and also functions correctly with snooze mode?