Need help finding an article I had read on fixing the Fascinates font pixelation. Pictures look awesome, but the fonts are a bit fuzzy, especially smaller fonts. I had read it just last week, but cannot find it in my history anywhere. Whatever they did really sharpened the fonts (at least in the screenshots). I am pretty sure it was about the Fascinate, but it may have been AMOLED in general.
Thanks in advance.
Found it!
http://project-voodoo.org/color
mising said:
Found it!
http://project-voodoo.org/color
Click to expand...
Click to collapse
lol, I was just thinking about this. I don't think there's a voodoo kernel for the Fascinate that supports this. I would LOVE to be proven wrong though.
Yeah, I just installed a voodoo kernel and don't see any color settings, just audio via the Voodoo Control App.
J Shed said:
lol, I was just thinking about this. I don't think there's a voodoo kernel for the Fascinate that supports this. I would LOVE to be proven wrong though.
Click to expand...
Click to collapse
Incorrect, there are a few that support this color fix. However as I recall reading, it only works at 100% brightness.
mexiken said:
Incorrect, there are a few that support this color fix. However as I recall reading, it only works at 100% brightness.
Click to expand...
Click to collapse
Do you know which ones offhand?
I am using jt1134's latest at 100% brightness and don't see any difference.
Now that I am on the right track though, I will just have to do a little more research.
mexiken said:
Incorrect, there are a few that support this color fix. However as I recall reading, it only works at 100% brightness.
Click to expand...
Click to collapse
Like I said, I'd like to be proven wrong, so... link?
I'm not finding anything for the Voodoo 5 kernels for the Fascinate.
Link not working
mising said:
Found it!
http://project-voodoo.org/color
Click to expand...
Click to collapse
Could you please re-post? The link no longer appears to be active
Thanks in advance.
timbuctoo said:
Could you please re-post? The link no longer appears to be active
Thanks in advance.
Click to expand...
Click to collapse
Wow, it has been a while since I have been on my Fascinate! I think Voodoo no longer supports color tuning though. My son is using my Fascinate right now with Devil Kernel and I think it supports color tuning through an add on program. I pulled the following from the Devil Kernel thread on the Fascinate. I will also check on my sons phone tonight to see if any of these work. Good luck!
http://forum.xda-developers.com/showthread.php?t=2149067
Tweaks --- Over Clocking and Kernel Control Programs --
Please don't ask about " devil kernel manager"
but you could click here for more about Devil Kernel tweaks and apk's to download
>>>>> >>>> >>>
Please don't ask about " devil kernel manager" || it still doesn't like to work except for a few settings,,, like big mem, etc... ... ... ...
.......... I honestly just copy that section over into -- mctweaker init.d settings -- which carries all the other tweaks i need and use... And it works... see Below
As well as plenty other programs
"Devil Kernel Manager" does work ,,, Some setting, though, do not stick across a reboot
and
I prefer to Use
"mcTweaker ® root" program I can set pretty much all the stuff that "devil kernel config" would normally let you do,,, and scripts auto run on reboot
...only things I dont see with mctweaker are No :Ram Settings = Xl/Big Mem :: :: Live OC :: :: but it has a few other things you can tweak and set that I really like...
not to mention
"ROM Toolbox Lite " is excellent with the stuff available in it...
I also prefer to Use
Aokp Performance Settings - Standalone Version
http://d-h.st/eRG
PerformanceControl.apk
I also found this nice Lulzactive controls app
1: explains things better
2: offers quick access
3: from the developer
https://play.google.com/store/apps/d...rak.lulzactive
and these work great too:::
,,, I've personally tested all of them ,,,
available from the play store
Some don't offer full functionality and capability but do allow you to set most all settings offered
::: titanium tweaker :::: greenblob :::: nstools :::: Trickster Mod
My Personal Favorite Devil settings are
100 - Min
1300 - Max
Lulzactive - Governor
Zen - I/O Scheduler
and SD read ahead 1024
Related
This app allows you to control your CPU voltages with an easy to use interface. You can increase or decrease voltages (undervolt or overvolt) for all frequencies or fine tune voltages for each individual frequency.
! HTC DEVICES !
! ROOT is Required !
! Kernel that supports HAVS or SVS voltage adjustment REQUIRED !
In addition, if you are an Incredikernel user, the app may also be used to toggle Incredikernel specific features on and off, namely USB fast charging and audio boost.
Get it over at http://www.incredikernel.com
IncrediControl is now also available in the market:
IncrediControl (If you have a dual core CPU do not use the market version until v1.5 final is released)
IncrediControl - Ad Free
Additionally, all donators are eligible to receive the Ad Free version. It doesn't matter how much or how little you donate or have donated. If you don't want to purchase the app from the market, you may donate using the button on this page. Please register on the site first and include your username in the comments box.
All previous donators, please register on the site if you have not done so and contact me with your username!
NOTE: It is a requirement of the HAVS adjustment that the kernel you are using has the HAVS sysfs interface implemented. If it does not, it will not work.
NOTE2: Before using, please delete any boot scripts you may have in /etc/init.d that toggle any of the settings this app controls.
Get it at http://www.incredikernel.com
Restore script - use this if you went too low and find yourself in a boot loop. Flash through recovery:
http://www.incredikernel.com/?p=229
IncrediControl v1.5 beta1:
This is an open beta of the latest IncrediControl. Changes include:
Dual core snapdragon(msm8x60) support
CPU frequency adjustment
Ability to tweak various CPU governors
Numerous bug fixes
Please test and report any bugs in the forum. I have not yet implemented the ability to set governor settings or CPU frequencies on boot. This will be implemented before the final release so please do not report this as an issue.
http://www.incredikernel.com/?p=419
IncrediControl v1.5 beta2:
Fixed compatibility with some msm8x60 kernels
http://www.incredikernel.com/?p=422
IncrediControl v1.5 Beta3:
Ability to set cpu and governor settings on boot
Updated support for Incredikernel Rezound
http://www.incredikernel.com/?p=430
Any chances of a kernel to go along with this? Ziggy's didn't like my phone and I always liked your's on my old incredible
sent from my newly unlocked Rezound
Using Ziggy's kernel. App works good, but FCs on click of the SVS portion? hmm
Izeltokatl said:
Using Ziggy's kernel. App works good, but FCs on click of the SVS portion? hmm
Click to expand...
Click to collapse
It might be a permissions thing. I tested on my own internal build. I'll look into it.
New beta posted that fixes compatibility with ziggy's kernels.
Thanks
Thanks for releasing app so fast Chad.
I enjoyed your work on my Incredible and I look forward to your work on the Rezound.
The app makes my life easier, and I've been tweaking it down bit by bit to see how much I can get this phone to sip.
Do you have any plans to do kernels? I'm using Ziggy's which seems to be running fine now (although i had a reboot earlier, but who knows why that happened).
I ran just your kernels religiously on my Incredible and enjoyed the performance and stability.
Regardly, thanks again for all the work you do bro.
Works great!
I would recommend for the Rezound screen size to make the buttons a tad wider. They are rather tiny on this screen and sometimes when i click the voltage adjustment button I click on the value input and go into keyboard entry mode. I have rather smaller hands so i would imaging its more annoying for bigger people.
other than that, great job.
Awesome app. I didn't know you had incorporated cpu controls into it
sent from my newly unlocked Rezound
is the default setting the default setting for HTC Rezound without ANY modification?
dccoh said:
Thanks for releasing app so fast Chad.
I enjoyed your work on my Incredible and I look forward to your work on the Rezound.
The app makes my life easier, and I've been tweaking it down bit by bit to see how much I can get this phone to sip.
Do you have any plans to do kernels? I'm using Ziggy's which seems to be running fine now (although i had a reboot earlier, but who knows why that happened).
I ran just your kernels religiously on my Incredible and enjoyed the performance and stability.
Regardly, thanks again for all the work you do bro.
Click to expand...
Click to collapse
I get random reboots on Ziggy's no matter what governor and clock speed.
It wipes dalvik cache when it happens too.
If i do a set cpu stress test, and let it sit there, eventually the freeze/reboot happens.
Something about how it's written.
pkopalek said:
I get random reboots on Ziggy's no matter what governor and clock speed.
It wipes dalvik cache when it happens too.
If i do a set cpu stress test, and let it sit there, eventually the freeze/reboot happens.
Something about how it's written.
Click to expand...
Click to collapse
I get it random reboots too, I tried many ROMs out and i still get them. The conclusion I get from it is that we have bad chips.
Ziggy mentioned it had something to do with the cache getting corrupted. Im wondering if regularly clearing it would prevent bootloops from happening
sent from my newly unlocked Rezound
pagereborn said:
is the default setting the default setting for HTC Rezound without ANY modification?
Click to expand...
Click to collapse
The default voltages are whatever the kernel default voltages are.
Sent from my ADR6425LVW using XDA App
Hey Chad, I shot a pm your way.
Can I download these from my computer, transfer to my sd card and go, or do I have to boot it into recovery and go through another process, thanks in advance.
You install them side loaded. no flashing
Sent from my ADR6425LVW using XDA App
dccoh said:
Hey Chad, I shot a pm your way.
Click to expand...
Click to collapse
Back at you
Izeltokatl said:
You install them side loaded. no flashing
Sent from my ADR6425LVW using XDA App
Click to expand...
Click to collapse
Will they show as an app? I am running ziggys kernel, have installed this a couple of times and nothing ever shows up, what should I do?
Anyone know what's the default setting for rezound without any modifications?
Sent from my ADR6425LVW using xda premium
[TWEAK][4.0.3]{c/o Siyah Kernel}{Arch.pro CPU:1.6GHz/GPU 400Mhz}<Arch.bat added>
closed
closed
My SGS2 didn't boot anymore after flashing the 3.0beta7 .tar via Odin. Flashed my old kernel back and it boots again..
Nice and interesting topic matey.
Will try and report it.
But could I ask you settings for best battery life? I mean sure you can help too.
Cheers
Sent from my little monster GS2
Kiwitje said:
My SGS2 didn't boot anymore after flashing the 3.0beta7 .tar via Odin. Flashed my old kernel back and it boots again..
Click to expand...
Click to collapse
1. ICS ROMs only
2. Siyah kernel compatable.
3.try a Rom tht already uses siyah 3.0
or check gokhanmorals thread:
Siyah Kernel 3.0 Thread
Test it now and report it later..thx..was searching optimal settings for extweaks..
Thank's man.
Look good here.
It's the first time i tweak my phone, but it's possible to do that without apps, just by editing a file via ssh?
I don't like GUI ^^
Thank's
Nice topic mate... I wonder where you got the idea from...
can we apply "save as boot settings" ?
and one more thing. Do we need to apply your setting in both apps i.e. extweaks and voltage control ?
hemal_4404 said:
can we apply "save as boot settings" ?
Click to expand...
Click to collapse
First test if these settings adapt to your device using the GUI elements(VC/ExTweaks).....
test for a day or so...if all goes well....u cud go init.d
Do we need to apply your setting in both apps i.e. extweaks and voltage control ?
hemal_4404 said:
Do we need to apply your setting in both apps i.e. extweaks and voltage control ?
Click to expand...
Click to collapse
the ExTweaks are recommended.
VC is optional.
I have applied both but it does'nt seems any problem.
GUI has been improved and for battery let me check for a day.
Bechmark result has been decreased to 3438 as previously it was 4410 with same Siyah kernal in GS 2 with Omega V6.0 ICS black blue edition.
hemal_4404 said:
I have applied both but it does'nt seems any problem.
GUI has been improved and for battery let me check for a day.
Bechmark result has been decreased to 3438 as previously it was 4410 with same Siyah kernal in GS 2 with Omega V6.0 ICS black blue edition.
Click to expand...
Click to collapse
Benchmark is gonna give u junk values.
It conflicts with the tweaks meant for battery savings....to generate a lower value.
In Real-Time its a whole different scenario
Thanks for good explaination.
Someone has a good config for AOSP? ^^
amus76 said:
Someone has a good config for AOSP? ^^
Click to expand...
Click to collapse
Actually havent tested on AOKP.
If anyone could test it and give feedback...that would be nice.
Sent from my GT-I9100 using XDA
Allright my phone gets f*ck as often when i'm at 1600 mhz
but all is fine at 1400, you're UV is quite good, mine were hardcore, I stay with yours
Hum Quadrant @ 1400 with dual core hotplug and performance, 3 runs: 4325
From an AOKP user
thx buddy.. going to give it a try next couple of days.. running wanam v10.3 so far so good
ram3n said:
Nice and interesting topic matey.
Will try and report it.
But could I ask you settings for best battery life? I mean sure you can help too.
Cheers
Sent from my little monster GS2
Click to expand...
Click to collapse
i Added the appropriate changes to juice the best out of your battery with this config.
Have a look
Has anyone tried the SuperCharger in the thread below on the TFP? Was wondering if it would make a difference or only really matters on devices with lower RAM to start with. Any thoughts?
http://forum.xda-developers.com/showthread.php?t=991276
I tried it a while back...works, but doesn't yet integrate well with ICS, as it does on Gingerbread.
Fine for ICS... go to android.mimic.ca and supercharge your services.jar and set permissions
zeppelinrox said:
Fine for ICS... go to android.mimic.ca and supercharge your services.jar and set permissions
Click to expand...
Click to collapse
Interesting haven't seen that site before ... so basically go to the thread I listed in the OP, install the script, fun the ICS compatibility steps, then go to the site you listed and patch the services.jar file? Might have to try this, wish there were some real benchmarks out there to see what gains it gives.
zeppelinrox said:
Fine for ICS... go to android.mimic.ca and supercharge your services.jar and set permissions
Click to expand...
Click to collapse
eheheh.... any post about supercharger anywhere, and zeppelinrox will find it.
RubenRybnik said:
Interesting haven't seen that site before ... so basically go to the thread I listed in the OP, install the script, fun the ICS compatibility steps, then go to the site you listed and patch the services.jar file? Might have to try this, wish there were some real benchmarks out there to see what gains it gives.
Click to expand...
Click to collapse
Yeah it`s all explained in post 2 of the supercharger thread.
Install script, grab the patched services.jar, do step 8 (set permissions) of the tutorial in post 2
Swiftks said:
eheheh.... any post about supercharger anywhere, and zeppelinrox will find it.
Click to expand...
Click to collapse
Nah... I`m stalking you LOL
Ok ... Ran the script, selected all recommendations, clean/rebooted, patched the services.jar, clean and rebooted, ran supercharger script again, now says I'm 100% supercharged.
Couple of questions at this point:
1.) Do I have to run the script every boot or periodically, or is it automated? I did this all with terminal emulator, didn't use the ScriptManager.
2.) There are a lot of options in the menu list( great to have options ) Anything else I should be doing in those options for selections above what is run by the script automatically( I did run the emisions to fix permissions just in case ).
3.) Not sure how to disable the two excepts from the OP in the script thread below on AOKP( or any other ROM before, never heard of these )
Code:
If you are using compcache and have lag or slow down after SuperCharging,
DISABLE compache, wipe caches and re-enable it.
Also make sure to uncheck/disable lock home in memory! (and leave it unchecked)
4.) How do I verify everything is all set, and running correctly after a reboot( or any other time I need )
5.) Does anything else have to be scheduled to run periodically? Does ScriptManager do scheduling, or do I have to add a cronjob or something.
Thanks for this, really thanks ... Look forward to testing the performance differences and letting fellow Prime users know what a great job the script dev did
EDIT: Script also says that I should use 1000HP but SuperWinFree Calculator Values are set so I'm "ok" should I enable the 1000HP settings from the script option to get better performance? Really want to milk what I can from this
If it was 100% supercharged without running 99supercharger manually, then it`s all set.
On ICS there is no lock home in memory option so don`t worry about that.
Same thing if you aren`t using compcache or zram.
You can verify everything just by running the V6 script just like you did before.
Script manager does do scheduling.. many do the detailing and engine flush and fix emissions via SM schedule.
You can go more aggressive but it may not bring any added benefit and only serve to unnecessarily hamper multitasking.
Just test with more aggressive and see if it`s snappier or not... though it likely won`t be lol
zeppelinrox said:
If it was 100% supercharged without running 99supercharger manually, then it`s all set.
On ICS there is no lock home in memory option so don`t worry about that.
Same thing if you aren`t using compcache or zram.
You can verify everything just by running the V6 script just like you did before.
Script manager does do scheduling.. many do the detailing and engine flush and fix emissions via SM schedule.
You can go more aggressive but it may not bring any added benefit and only serve to unnecessarily hamper multitasking.
Just test with more aggressive and see if it`s snappier or not... though it likely won`t be lol
Click to expand...
Click to collapse
Awesome, thanks for the info. I'll test out the next day or two and let ya'll know how things are running
Sent from my Transformer Prime TF201 using Tapatalk 2
Hell, that is way too complicated especially for a stock odexed rom. So many steps and I don't have cwm. Otherwise it looks like it is worthwhile.
no need for CWM.
Maybe you can try deodexing the rom and use the mimic site.
Just leave it deodexed.
Or flash a custom rom
pbezza said:
Hell, that is way too complicated especially for a stock odexed rom. So many steps and I don't have cwm. Otherwise it looks like it is worthwhile.
Click to expand...
Click to collapse
If you have a deodexed ROM it really isn't complicated at all, the OP in the thread looks like it has a lot of steps, but really 95% of it is all automated
zeppelinrox said:
no need for CWM.
Maybe you can try deodexing the rom and use the mimic site.
Just leave it deodexed.
Or flash a custom rom
Click to expand...
Click to collapse
So Do you mean the below ??
- deodexed the services.odex
- Drop the classes.dex to services.jar then upload it to mimic site.
- Download the modified services.jar file to /system/framework.
Will it work?
It is really pain my ass to go though all steps for the odexed ROMS.
Have anyone had a script or a simple step to modify the services.odex ??
I believe it is in WSG.07 I'm not sure though
Sent from my HERO200 using xda premium
That thread with the instructions is too poorly written....It's an assault of random words, some underlined, some bonded, some underlined and bolded with different font sizes. Can a normal human actually read through it and understand it? Jesus christ!
But it is included with the wsg rom.
@zeppelinrox
Thanks for the work. So basically this script changes Android's auto mem mgr (AMM) default minfree values, which are six numbers in /sys/module/lowmemorykiller/parameters/minfree. Is that correct?
You mentioned empirical testing for your chosen values for the Milestone. How do you determine what is optimal for any given device? Do you simply take percentages of the total available RAM?
For the DIY'ers, is your script the same as putting the below two commands into an auto-start script, using Script Manager?
echo "A,B,C,D,E,F" > /sys/module/lowmemorykiller/parameters/minfree
where A,B,C,D,E,F are "kill thresholds" set for each of six priority groups. Note: Values are in 4KB pages, so divide by 256 to convert to megabytes.
/system/bin/compcache stop
Reference:
http://forum.xda-developers.com/showthread.php?t=622666 (most helpful)
http://forum.xda-developers.com/showpost.php?p=16635617
http://www.droidforums.net/forum/liquid/102674-disable-enable-compcache-fix-redraws.html
http://code.google.com/p/compcache/
yumms said:
That thread with the instructions is too poorly written....It's an assault of random words, some underlined, some bonded, some underlined and bolded with different font sizes. Can a normal human actually read through it and understand it? Jesus christ!
But it is included with the wsg rom.
Click to expand...
Click to collapse
Glad it wasn't just me. I got way overwhelmed with that convoluted mess of a post.
(No offense meant to anyone)
e.mote said:
@zeppelinrox
Thanks for the work. So basically this script changes Android's auto mem mgr (AMM) default minfree values, which are six numbers in /sys/module/lowmemorykiller/parameters/minfree. Is that correct?
You mentioned empirical testing for your chosen values for the Milestone. How do you determine what is optimal for any given device? Do you simply take percentages of the total available RAM?
For the DIY'ers, is your script the same as putting the below two commands into an auto-start script, using Script Manager?
echo "A,B,C,D,E,F" > /sys/module/lowmemorykiller/parameters/minfree
where A,B,C,D,E,F are "kill thresholds" set for each of six priority groups. Note: Values are in 4KB pages, so divide by 256 to convert to megabytes.
/system/bin/compcache stop
Reference:
http://forum.xda-developers.com/showthread.php?t=622666 (most helpful)
http://forum.xda-developers.com/showpost.php?p=16635617
http://www.droidforums.net/forum/liquid/102674-disable-enable-compcache-fix-redraws.html
http://code.google.com/p/compcache/
Click to expand...
Click to collapse
I didn't rehash anything.
I made a totally new wheel.
Nobody else has thought to rearrange the adjs grouping limits, ADJ priorities so that some items are more important than others and all that is in conjuction with minfree values.
Minfree values is secondary.
AKMO or AMM or other Minfree managers have always done that.
That's only the gas.
I rebuilt the engine.
acdcking12345 said:
Glad it wasn't just me. I got way overwhelmed with that convoluted mess of a post.
(No offense meant to anyone)
Click to expand...
Click to collapse
Yes, you aren't the only person that failed the comprehension test.
I don't want dumb people using my script to break their phones.
You're welcome.
>Nobody else has thought to rearrange the adjs grouping limits, ADJ priorities so that some items are more important than others and all that is in conjuction with minfree values.
Thanks for the note. I've skimmed through your script, and saw that you also write out the ADJ file (along with some other minor tweaks). Linux mem use isn't my forte, but the below explains it simply enough.
http://www.cs.fsu.edu/~baker/device...x/drivers/staging/android/lowmemorykiller.txt
Rather than asking for further specifics, I'll just parse through the script. It's not complicated.
>Yes, you aren't the only person that failed the comprehension test.
>I don't want dumb people using my script to break their phones.
Thanks also for demonstrating your maturity level.
!! INTRO !!
Click to expand...
Click to collapse
As you all know that Furnace kernel and Franco kernel version r6 has the RGB display calibration control ability ,
now we can adjust LCD screen RGB value by changing the default value (255 255 255)
in the system file "/sys/devices/platform/kcal_ctrl.0/kcal"
One can change the RGB value in the above mentioned file manually using any good file manager with root access.
But it will again reset to default (255 255 255) when you reboot phone.
Many of us (One Plus One owner) think that the LCD screen is a bit yellowish.
Feature given in CM11S --> Settings --> Display & lights --> Screen Color --> Custom will only allow us to control
Hue
Saturation
Contrast
Intensity
But it is difficult for us to adjust screen yellow tone by this.
Here is a simple tweak that can help you to set RGB (Franco Kernel r6) on boot
I have created a simple shell script that will change RGB value on every boot
!! INSTRUCTION / DOWNLOAD !!
Click to expand...
Click to collapse
Create a file called "Kcal_LCD_RGB_SetOnbootScript" and put into /etc/init.d/ folder and give permission "rwxr-xr-x"
*** you can give any name ***
Only Work With Furnace-1.0.1 Kernel & Franco kernel for OnePlus One that has LCD KCAL Support
Code:
#!/system/bin/sh
echo "220 230 255" > /sys/devices/platform/kcal_ctrl.0/kcal
Suggested by @savoca
--------------------------------------
"Add that line I gave you below. The control line verifies the kcal part and makes sure it's a safe or proper value before sending it to the panel."
Code:
echo "1" > /sys/devices/platform/kcal_ctrl.0/kcal_ctrl
You can set any RGB value as per your like..
Download Sample file here -- View attachment Kcal_LCD_RGB_SetOnbootScript.zip
Requirements
---------------------------------
1) OnePlus One Phone
2) CM11S Stock ROM (Franco) or CM11 Nightly with Furnace Kernel
3) Rooted Device
4) Franco Kernel r6 or Furnace Kernel
5) File Manager
---------------------------------
Another Easy way by TricksterMOD App as guided by @savoca
===============================================
Install TricksterMOD App --- https://play.google.com/store/apps/details?id=com.bigeyes0x0.trickstermod
Grant root access
Open app and click on top left menu --> Select Screen --> Adjust RGB values and hit "Right" Sing on top menu to apply it.
!! CREDIT !!
Click to expand...
Click to collapse
Credit goes to @savoca for Furnace-1.0.1 Kernel for OnePlus One
@franciscofranco for Franco Kernel(r6)
!! THANK YOU !!
Click to expand...
Click to collapse
Thanks
Give it a try and let me know you experiences in this thread.
Note: I am trying to make an app for it with color slider. it may take time since not an android/java developer.
Lets share some RGB colors that people find well-suited to their display as well as Hue/Saturation/Contrast
what... I hope you know that franco picked this feature from my kernel to begin with...
https://github.com/franciscofranco/one_plus_one/commit/2f9a5114f239b92f0f3e5d738dcc3ce738cb9532
https://github.com/franciscofranco/one_plus_one/commit/ae04081ab025e00a38b8cbf29741b14b52558cce
https://github.com/franciscofranco/one_plus_one/commit/35da5c89c5fb5d8a4853fedb504823ab63ce8c97
savoca said:
what... I hope you know that franco picked this feature from my kernel to begin with...
https://github.com/franciscofranco/one_plus_one/commit/2f9a5114f239b92f0f3e5d738dcc3ce738cb9532
https://github.com/franciscofranco/one_plus_one/commit/ae04081ab025e00a38b8cbf29741b14b52558cce
https://github.com/franciscofranco/one_plus_one/commit/35da5c89c5fb5d8a4853fedb504823ab63ce8c97
Click to expand...
Click to collapse
Thank you for this information...It was not known to me that it picked up from your kernel
(have not read all posts of kernel thread)
Anyway, Credit goes to both of you for giving such nice kernels..
Mnt-XDA said:
Thank you for this information...It was not known to me
(have not read all posts of kernel thread)
Anyway Credit goes to both of you for giving such nice kernels..
Click to expand...
Click to collapse
Just thinking maybe you could give credit where due, if anything give it to LG. But you really plastered franco's name/kernel all over here.
Also apps like TricksterMOD already support this. And to maintain compatibility with most of the cherry-picks that will come of this, you should add this line to your script.
Code:
echo "1" > /sys/devices/platform/kcal_ctrl.0/kcal_ctrl
savoca said:
Just thinking maybe you could give credit where due, if anything give it to LG. But you really plastered franco's name/kernel all over here.
Also apps like TricksterMOD already support this. And to maintain compatibility with most of the cherry-picks that will come of this, you should add this line to your script.
Code:
echo "1" > /sys/devices/platform/kcal_ctrl.0/kcal_ctrl
Click to expand...
Click to collapse
OP updated as suggested by you.
Thanks a lot for guiding us.
zephiK said:
Lets share some RGB colors that people find well-suited to their display as well as Hue/Saturation/Contrast
Click to expand...
Click to collapse
Lets get to sharing those settings! I find Trickstermod is the best for this and can easily be configured...
Works like a charm... No more yellow on the bottom of the one...
dj_suca said:
Works like a charm... No more yellow on the bottom of the one...
Click to expand...
Click to collapse
Share settings!
Sent from my One using Tapatalk
zephiK said:
Share settings!
Sent from my One using Tapatalk
Click to expand...
Click to collapse
i used the default script on the first page...
dj_suca said:
Works like a charm... No more yellow on the bottom of the one...
Click to expand...
Click to collapse
Takes away the yellow but makes my display REALLY cold like a bluish tone. I have played quite a bit but I am yet to find any setting that makes my display look like it should from the factory... Will keep trying.
shojus said:
Takes away the yellow but makes my display REALLY cold like a bluish tone.
Click to expand...
Click to collapse
Not Really... but's ok..
savoca said:
Just thinking maybe you could give credit where due, if anything give it to LG. But you really plastered franco's name/kernel all over here.
Also apps like TricksterMOD already support this. And to maintain compatibility with most of the cherry-picks that will come of this, you should add this line to your script.
Code:
echo "1" > /sys/devices/platform/kcal_ctrl.0/kcal_ctrl
Click to expand...
Click to collapse
Thanks man ... your ideas about kcal is fantastic ... this is a very good enhancement with the new gamma code by CM.
shojus said:
Takes away the yellow but makes my display REALLY cold like a bluish tone. I have played quite a bit but I am yet to find any setting that makes my display look like it should from the factory... Will keep trying.
Click to expand...
Click to collapse
For my taste yep. The screen get really "cold" and even blueish color with those settings.
shojus said:
Takes away the yellow but makes my display REALLY cold like a bluish tone. I have played quite a bit but I am yet to find any setting that makes my display look like it should from the factory... Will keep trying.
Click to expand...
Click to collapse
Yep, I had to revert back to stock, looked horrible.
ak said:
Thanks man ... your ideas about kcal is fantastic ... this is a very good enhancement with the new gamma code by CM.
Click to expand...
Click to collapse
You should see what I did with it in mako land
May sound a bit stupid here but can't you already calibrate the display in display settings?
Prey521 said:
Yep, I had to revert back to stock, looked horrible.
Click to expand...
Click to collapse
You can try with different RGB values, its just an example...
Mbennett156 said:
May sound a bit stupid here but can't you already calibrate the display in display settings?
Click to expand...
Click to collapse
In display setting no RGB setting is there in cm11s... you can control hue from there
shojus said:
Takes away the yellow but makes my display REALLY cold like a bluish tone. I have played quite a bit but I am yet to find any setting that makes my display look like it should from the factory... Will keep trying.
Click to expand...
Click to collapse
same for me, i dont like ist too much blue
simo.scorpion said:
same for me, i dont like ist too much blue
Click to expand...
Click to collapse
Why don't you share optimize RGB value with us by trial and error
REQUIREMENTS.
MUST BE ROOTED WITH RECOVERY.
HAVE INIT.D SUPPORT for method 1.
HAVE TERMINAL EMULATOR for method 2.
NOTE: This may work for all android devices but is only tested on a LG D851. The mod will install on all devices but may give unwanted results. If it works let us know.
GENERAL DISCLAIMER.
XDA and I are NOT responsible if anything wrong happens to your device by using this mod. Always make sure you have a backup ready if needed.
ABOUT THIS MOD.
Here is a very simple mod that I wanted to share. This is what has been labeled in the past as the build property to remove a FPS cap on all android devices. This doesn't actually do that but you will see an increase in frames per second by adjusting the EGL swap interval. Unfortunately, this property has always had big issues with visual artifacts that made it useless to use.
I found it frustrating that we could obtain such a high FPS but plagued with issues. So I spent some time and found a new value. One that could actually work on all android devices. Instead of 1 for stock or 0 for modified. Here is the new value...
debug.egl.swapinterval=-60
A general description...
https://www.khronos.org/registry/egl/sdk/docs/man/html/eglSwapInterval.xhtml
While other negative values may work, -60 brought the most bang for the buck when it came to benchmarks. I am truly excited about finding a way to make it work and although it's just a new value, I would appreciate if you could give me credit if using this property as it is the first time it will actually work the way we want it. This value didn't just fall from the sky. Certainly no need to ask for any permissions.
WAYS TO USE THIS MOD.
I figured many people would at least like to try this out so I made it as easy as possible for newer and more advanced users. The mod is actually really easy to apply. Simply add it to your build.prop file and reboot or use one of methods below.
METHOD 1.
Use the proper flashable zip to install into init.d so the mod is ready directly after a reboot.
METHOD 2. (recommended)
Use the proper flashable zip to install into /system/xbin and call upon it when needed and disable it when not needed.
INSTALLATION.
Method 1
version 1.1
1. Download https://www.androidfilehost.com/?fid=23991606952603390
2. Flash in recovery.
3. Reboot.
METHOD 2.(recommended)
version 1
1. Downloadhttps://www.androidfilehost.com/?fid=23991606952602432
2. Flash in recovery.
3. After you reboot open Terminal Emulator and type the following without the quotes.
4. Type "su" and press the enter key.
5. Type "unlockfps" and press enter. This will activate the property for higher fps.
To deactivate type "lockfps"
NOTE: You may need to toggle your screen off/on to fully activate the mod using method 2.
You will also need to activate the mod again after a reboot. The setting won't survive a reboot with method 2.
UNINSTALL
METHOD 1.
version 1.1
https://www.androidfilehost.com/?fid=23991606952603391
Version 1 (depreciated)
https://www.androidfilehost.com/?fid=23991606952602181
METHOD 2.
version 1
https://www.androidfilehost.com/?fid=23991606952602429
CHANGELOG
Method 1 version 1.1- Fixed permissions.
I have had people tell me battery life is better and some say it's worse. You be the judge and let us know.
Happy Flashing!
These zips will flash on any device, so If you have something other than an LG G3 you can try it. If you choose to try I definitely suggest using method 2. This way if you run into trouble all you need to do is reboot and the mod is disabled.
PLEASE!
IF YOU TRY THIS MOD ON ANOTHER DEVICE LET US KNOW HOW IT WORKS!!
So far I have positive reports for Samsung and Sony devices.
thanks bro. gonna try it on my vs985
Installed on my D855 and it improves animation speed an in overall system fluidness. I'm using it in combination with LSpeed tweak and working perfect, for battery impact, if there will be one, will see after daily use. Thanks for this my phone is flaying, so to speak.
Sipi1302 said:
Installed on my D855 and it improves animation speed an in overall system fluidness. I'm using it in combination with LSpeed tweak and working perfect, for battery impact, if there will be one, will see after daily use. Thanks for this my phone is flaying, so to speak.
Click to expand...
Click to collapse
Yea. I thought it was only going to work in games and such but it seems to make everything a little quicker and smoother. Scrolling etc... I wasn't expecting that.
after installing unlockfps antutu score not bad, using darkknight rom.
getting around 42+++ on antutu as well. & yes, everything seem much snappier, considering i got shedloads of listview, ime & toast animations (xuimod/xposed, ftw!).
good example is gosms. starting the app uncached is almost instantaneous. then when i go to a long thread (conversations w/ wifey, go figure) i could really say that load time is quicker than before the mod. close to 1 batt cycle & i don't notice any unusual drain.
tried it on my T700 as well. i'm getting the same results, though antutu scores don't agree. didn't explode so far. btw, does enabling hw/gpu acceleration negate this? or is it the other way around?
maxq1 said:
getting around 42+++ on antutu as well. & yes, everything seem much snappier, considering i got shedloads of listview, ime & toast animations (xuimod/xposed, ftw!).
good example is gosms. starting the app uncached is almost instantaneous. then when i go to a long thread (conversations w/ wifey, go figure) i could really say that load time is quicker than before the mod. close to 1 batt cycle & i don't notice any unusual drain.
tried it on my T700 as well. i'm getting the same results, though antutu scores don't agree. didn't explode so far. btw, does enabling hw/gpu acceleration negate this? or is it the other way around?
Click to expand...
Click to collapse
I have "force gpu rendering" enabled. To boost 2d rendering but that's it as far as dev options.
If your talking build properties then I really don't know for sure.
Hey,
I use Methode 1 on newest BlizzPop at D855.
For First Time i can say...... Wow amazing. The Rom is very very fast with this Mod. No lags. Smooth and Fluid.
Now i hope the Battery hold.
Test right Now @ work.
Thx for your great Mod, work on it and your Time.
razz1 said:
Yea. I thought it was only going to work in games and such but it seems to make everything a little quicker and smoother. Scrolling etc... I wasn't expecting that.
Click to expand...
Click to collapse
For me it seems improve phone and graphics in general, for games I don't know because I don't play games on it. So far didn't notice any heating up or any other side affect from this only improvements and also didn't notice any battery drain.
Working so far
Working great so far ! i also combined this with the CTT mod and the combination is killer so smooth the fastest experience ever!
lg G3 D850 AT&T
Rom : Blisspop v3.2 5.1.1 5/12/15
Kernel: 777 Kernel
flashed on vs985
This mod is amazing! the before and after is huge. My phone already felt really fluid but after installing this is flies--apps open instantly and animations are like butter.
Thank you so much for sharing this with the community. Everyone needs to flash this because the difference it makes is amazing.
NVM!
I combined method 1 with Velocity set to 4300 and a few other tweaks to build.prop, and made this phone run like butter. Only place where I see stutter is on Facebook, but is better than before the mod.
Sent from my Ice Cold D850
Thx alot razz
I have d855 and tried it, method 1 didnt give me any change in antutu benchmark so i tried method 2 and benchmark gave 3000 points more
Both tests after reboot
Why was it locked in the first place?
is this different from the one found in hidden menu? the dynamic lcd refresh on/off - enable 60fps
Sorry for the stupid question... but do i need to add (after i flashed and activated (method2) ) "debug.egl.swapinterval -60" to build.prop ?
sabret00the said:
Why was it locked in the first place?
Click to expand...
Click to collapse
It wasn't. This mod is to adjust a swap interval. Not actually unlock anything.
People have just called it that in the past.
radeonxt said:
is this different from the one found in hidden menu? the dynamic lcd refresh on/off - enable 60fps
Click to expand...
Click to collapse
Completely
broyer10 said:
Sorry for the stupid question... but do i need to add (after i flashed and activated (method2) ) "debug.egl.swapinterval -60" to build.prop ?
Click to expand...
Click to collapse
You don't need to add anything permanent to the build.prop file. These methods will do it on the fly for you.
Used method one and no longer have slight stutter in notification panel!! Now to try antutu