while i was updating my t-mobile hd2 i unplugged the usb cable and now the phone is dead and it shows me just update crash. if someone can help me please do that. thanks
try to turn off ur device and turn it on with holding vol down to enter bootloader withr three colours then connect ur device and start flashing ur rom
i did that but it doesent want to start updating it stayes on 0%
Why in the heck did you unplug? Did you do that in the middle of the flash?
yes unfortunately did that
Related
guyz i received an update from .6x to .7x firmware notification yesterday in Sony bridge for mac.
so i connected it and gave update.
it said to switch on the mobile (successfully updated).
i pressed the power button for a long time also . no sign of switching on.... even i tried power+ volume down button also.... no sign of switching on...
help me out guyz...
try to repair it via SEUS.
when i try to connect to mac...just orange notification led glows... it does not detect itself.....
did u run the SEUS? i think instructions will be posted on your screen once u do the repair. i dont have mac so i dont know if its the same process with windows, anyway try to run the SEUS and it will ask you to connect your phone, if it does not connect try to download the driver for your phone and install it, then try to connect it again.
or if u want
you can try to download an orig ftf then flash it on your phone.
first you need a flashtool
http://forum.xda-developers.com/show....php?t=1588586
and then u need the ftf (orig)
http://forum.xda-developers.com/show....php?t=1599303
and for the instructions on flashing the original firmware
http://forum.xda-developers.com/showthread.php?t=928343
if u choose to flash using flashtool:
since your phone is not booting, once you have the necessary files and place the firmware on the folder of flashtool, (c:flashtool/firmware/your downloaded firmware), open the flashtool then click the lightning icon and choose flashmode and choose your firmware, then connect your phone via flash mode (power button + volume down), this will not connect immediately, what will you do is to push the power button+ volume up and wait until it vibrates 3 times, then after that push the power button+volume down, then the pc will detect your phone and flash the firmware, and then wait until it finish, once finished power on your phone. ( it happens to me also that my phone does not turning on and thats what i did).
Plug it into charger to charge for a while.
i tried to charge it for an hour also... no response.....
or you can go to the store where you buy the phone and have them repair it, its still under warranty right?
I have same problem and this is the way worked back
I had encounter this problem just this morning cz I "repair" my phone by using PCC.
I let it overnight cz when I did it already midnight.
When morning I woke up, I found that the phone was totally shut down and I was unable to turn on the phone.
I was worried at that time and even I charge my phone I cant switch on the phone.
I let the phone charge for very long time, using the adapter charger. Then I try to pull out the sim card and wait long time just put back the sim card, suddenly the phone switch on by itself.
But i really dunno why. Hehe
This is my way. Hope will help you
I have the same problem, how long i must wait until try to insert again the sim card???
While updating a new Xperia U to ICS the PCC had an error while flashing the new firmware. Now the screen lights up, the sony logo is shown for ~3-5 seconds and then it reboots.
After that I have been unable to get it recognized again by either PCC/SUS or flash tool.
I also checked my log files in Linux and no device appears.
I've tried 3 different machines (2x Windows 8, 1x Win 7), multiple USB ports. Also leaving the battery out for ~30 mins didn't change the behavior.
The green light for download mode comes on, but after about 5 seconds the light goes out and it goes into the boot loop again.
So by now I believe the device needs to be sent in, but maybe some one has a few more things I can try.
Try pressing the volume down plus volume up plus power button all 3 simultaneously till u feel 3 vibrations
Sent from my ST25i using Tapatalk 2
Can you make sure the Flashtool drivers are installed ? Go to Flashtool Directory, open drivers directory and start the setup.. Make sure to select the Flashmode and Fastboot drivers are also selected. Then, reboot System and folow this order.
Startt flashtool,select f/w, wait for Flashtool to tell you to connect to device. Then, holding the Volume down button (while phone is switched off), plug the cable into phone (The usb cable must already be connected to PC before starting the Flash Procedure )
The Order is very important.. I had same issue with U (althoguh mine crashed with Flashtool and same as what you observed. When I followed this order, I was able to get it detected and flashed )
Hopefully, you wont need to return to Service Center
let me know how it goes
Cheers ! & Merry Christmas
And yes I forgot to mention
Wrong section
Plz use question n answer section next tym
Sent from my ST25i using Tapatalk 2
drsanket_xperia_u said:
Try pressing the volume down plus volume up plus power button all 3 simultaneously till u feel 3 vibrations
Sent from my ST25i using Tapatalk 2
Click to expand...
Click to collapse
No response, I've tried holding all three buttons for a minute, but it doesn't vibrate after turning on. The only way I can turn it off is by removing the battery.
Min3r said:
Can you make sure the Flashtool drivers are installed ? Go to Flashtool Directory, open drivers directory and start the setup.. Make sure to select the Flashmode and Fastboot drivers are also selected. Then, reboot System and folow this order.
Startt flashtool,select f/w, wait for Flashtool to tell you to connect to device. Then, holding the Volume down button (while phone is switched off), plug the cable into phone (The usb cable must already be connected to PC before starting the Flash Procedure )
The Order is very important.. I had same issue with U (althoguh mine crashed with Flashtool and same as what you observed. When I followed this order, I was able to get it detected and flashed )
Hopefully, you wont need to return to Service Center
let me know how it goes
Cheers ! & Merry Christmas
Click to expand...
Click to collapse
I tried that right now, Flashmode and Fastboot drivers are installed. Flash tool is ready, device is plugged in with volume down pressed, green light comes on. Nothing is found on the PC, after about 5 seconds the green light turns off and the phone shows the sony logo. Green light also comes on if i simply plug in the usb without volume down pressed. So I'm thinking, the download mode has some how been corrupted?
drsanket_xperia_u said:
And yes I forgot to mention
Wrong section
Plz use question n answer section next tym
Sent from my ST25i using Tapatalk 2
Click to expand...
Click to collapse
Sorry about that, maybe a moderator can move my topic to the right section.
Are u connecting it properly???
Make sure when u connect ur cell to ur pc u have nt presed the power key
keep the phone off
Press the volume down button ( keep it pressed, dun
leave it) and connect it to the usb
U will see green light
Darn.. That looks bad.. That did it for me on every occasion. I think you might have a hardbrick due to the interrupted write cycle so I dont think any other way except to take it to Service Center
Sorry I couldnt help
drsanket_xperia_u said:
Are u connecting it properly???
Make sure when u connect ur cell to ur pc u have nt presed the power key
keep the phone off
Press the volume down button ( keep it pressed, dun
leave it) and connect it to the usb
U will see green light
Click to expand...
Click to collapse
Exactly what I'm doing and the green light does come on. Except it decides to go into a boot loop after it apperantly boots into download mode but doesn't stay there.
Min3r said:
Darn.. That looks bad.. That did it for me on every occasion. I think you might have a hardbrick due to the interrupted write cycle so I dont think any other way except to take it to Service Center
Sorry I couldnt help
Click to expand...
Click to collapse
That's what I've been fearing. In which case it goes back to the seller in the hope that he will send me a new device.
Moved
Is there any chance of properly reactivating flashmode by using a JTAG?
Cebalrai said:
Is there any chance of properly reactivating flashmode by using a JTAG?
Click to expand...
Click to collapse
Risky business
Jtag. ...used for hard bricked devices n. Seen max to work wid samsung phones only....
Wont recommend u too open up ur xu
Let the service center try first
Sent from my GT-N7000 using Tapatalk 2
Have you manage to recover your phone without taking it to service?
I'm in the exactly same situation... Any help is welcome...
While trying to enter flashmode, green light turns on but after some secs it turns off and sony logo appears on screen. any chance to recover this beautiful brick ?
thanks
After several tries (a lot of...) I manage to enter flashmode and SUS is now reinstalling sony ROM.
Honestly I don´t know how it works this time and not the others but i'm happy with it independently of what happens.
... seems flashtool is detecting ur phone try to flash first the stock kernel and do not wipe everything it shud be in timing though.. onces it is flash charge ur phone in kernel mode (phone is off) then you can flash the stock fw of ur XU.
I bricked my phone
I bricked my xperia U as well... When i tried to power ON, it just vibrates and nothing happens, i dont even get the sony logo. When i get into flash boot mode it gets connected but after 20secs, the phone turns off again. Only fastboot mode stays on. How can i unbrick my phone??? Plz help. I made a mistake by flashing the custom jelly bean rom without flashing the kernel first.
adithyasailesh said:
I bricked my xperia U as well... When i tried to power ON, it just vibrates and nothing happens, i dont even get the sony logo. When i get into flash boot mode it gets connected but after 20secs, the phone turns off again. Only fastboot mode stays on. How can i unbrick my phone??? Plz help. I made a mistake by flashing the custom jelly bean rom without flashing the kernel first.
Click to expand...
Click to collapse
No worries. The phone turns off because it doesn't receive any signal from the PC - many people make the mistake of connecting the device in flashmode first, and then they start the flashtool etc.
Instead, load the flashtool first, go to flashmode, select a complete/full stock ftf for your phone (whichever version you want, but do double check if the ftf has kernel.sin file in it) and press the flash button. Only once you get the pop up with the animation telling you to connect the phone in flash mode, connect the phone in flashmode (volume - button pressed when connecting cable). As soon as you connect the phone, the flashtool will start its magic and your phone won't turn off.
if you can go in cwm wipe system then you will only be stuck on sony logo then use this guide http://www.youtube.com/watch?v=hPPWRXcsz7g.....it will work because this same happened to me and i fixed it with this method!
-------------------------------------------------------------------
press thanks if i helped
-------------------------------------------------------------------
using xperia u
locked bootloader
jb experience v2.1 rom
I have xperia neo L and it stopped working it won't turn on... Here are the simptoms, when i press power button it vibrates and nothing else... Display won't turn on there are no sounds nothing... When i put it to charger if battery is low it shows orange light and when it charges it goes green... I tried seus and it completely reinstalls the software and same thing happens... Tried flashtool and all versions of stock roms same thing...
It goes to flash mode when i press back button and connect it to usb and it flashes phone succesfully and nothing... When i disconect phone and connect it again Flashtool sais that device is connected with usb debbuging off... So it detects phone... I even tried for fun to connect device without pressing power button, i connected it to usb then pressed home button and it installed as mass storage device, i'll place screenshots... I thought first maybe display is broken but it isn't... When i put sim card in phone and turn it on i'm always unavailable... Don't know what to do next? Any advices? Exept from thaking it to service, i will do that eventually but for few more days i want to tray fixing it myself... I would appreciate any advice... Thnx guys
Keep the device fully charged and try seus..Then again pin in charger only then after switch on. It may work
Hey guys im in a lot of trouble right now. I have bricked my device and im not sure if i will be able to restore it back. Im not worried about the data in the device anymore,i just want my device booting back into any OS possible!!
Here's what happened,i was flashing the stock firmware of the device through flashtool.The process was about half done.All of a sudden my device fell down from my computer desk.The cable got disconnected and the device doesn't boot anymore.Any solutions to make it boot back up? Please help...
Hello there
When you connect your XU to PC with volume buttons pressed, Does the LED light up?
I hope you just made a soft brick to your phone, not Hard Brick.
When i connect the device a green flash comes up for like a microsecond and thats it.Then the device is as good as dead.The same thing happens when i connect the device to the pc,a momentary flash of green light and then back to dead...When i connect the device by holding the vol up button,the same thing happens.. only with a blue coloured flash of light.The device is not recognised by sony pc companion either.
krazzyK said:
When i connect the device a green flash comes up for like a microsecond and thats it.Then the device is as good as dead.The same thing happens when i connect the device to the pc,a momentary flash of green light and then back to dead...When i connect the device by holding the vol up button,the same thing happens.. only with a blue coloured flash of light.The device is not recognised by sony pc companion either.
Click to expand...
Click to collapse
Reflash it using flashtool hold volume up and power botton leave it after it viberates 3 times it means that it is now switched off.
Now use flash it with flashtool you'll get your device back.
Give it a try and let me know.
its just of 5 to 10 mint work ,,,,,remove the battery for 3 sec and put it back into mobile ,,,hold volume down and plugin the USB cable in mobile ,,,u r will switch to flashboot mod by green light down to led bar,,,,,now flash official stock ROM ,,,,at installing time at 75% it will take time so plz be wait to complete
Thanks everybody
finally i could get my device into flash mode and then i flashed stock firmware... The device is running fine now... though i lost all my data.
Thanks everybody i love the dev support here for this device.
When I was Flashing Through Odin My galaxy A300f A sudden power Failure Caused and turned off my pc when power back Pc doesnot detect my phone after that I try to Turn On my android Its keeps vibrating Doesnt Stops when i press 3 buttons to reboot to odin it goes off (vibrate stops) it doesnot not display anything can someone help me
fazalmohamed11 said:
When I was Flashing Through Odin My galaxy A300f A sudden power Failure Caused and turned off my pc when power back Pc doesnot detect my phone after that I try to Turn On my android Its keeps vibrating Doesnt Stops when i press 3 buttons to reboot to odin it goes off (vibrate stops) it doesnot not display anything can someone help me
Click to expand...
Click to collapse
Hi , your situation is complicated because the firmware writing to your emmc is stoped in the middle because your power failure .
In order to try to bring your device back in life if your download mode is okey you can use USB JIG which you can find on Ebay or some other shop in order to put your device into Download mode .
Here is example how is look like .
https://www.youtube.com/watch?v=QcnNO_LplAE
If that dosn't work let your battery dry to 0% and then put the usb cable and just hold 3 keys for download mode until Download message is show up on your screen.
Good luck...
fazalmohamed11 said:
When I was Flashing Through Odin My galaxy A300f A sudden power Failure Caused and turned off my pc when power back Pc doesnot detect my phone after that I try to Turn On my android Its keeps vibrating Doesnt Stops when i press 3 buttons to reboot to odin it goes off (vibrate stops) it doesnot not display anything can someone help me
Click to expand...
Click to collapse
hello,
my friend had this same situation you are passing with.
i can confirm that using the usb jig from ebay wil help you.
good luck