[Q] noob question regaurding clockwork rom manager/recovery - Vibrant Q&A, Help & Troubleshooting

Hi I am new to this. I was trying to fully root my vibrant. I recently upgraded to 2.2 froyo using keis software. at the end of upgrade phone would not go past the "S" screen. i reboot and it worked.. Anyways now I am trying to root using instructions found here http://forum.xda-developers.com/showthread.php?p=9375927 . I am at the part where it says At the top, click "Flash Clockwork Recovery" and after it has finished click to Reboot Into Recovery. However when I click reinstall packages it ends with RED letters saying somthing like E: full signature could not be verified. Am I doing somthing wrong or does it have to do with when i updated with keis. Any help would be appreciated.

Do this instead
csmith177 said:
Hi I am new to this. I was trying to fully root my vibrant. I recently upgraded to 2.2 froyo using keis software. at the end of upgrade phone would not go past the "S" screen. i reboot and it worked.. Anyways now I am trying to root using instructions found here http://forum.xda-developers.com/showthread.php?p=9375927 . I am at the part where it says At the top, click "Flash Clockwork Recovery" and after it has finished click to Reboot Into Recovery. However when I click reinstall packages it ends with RED letters saying somthing like E: full signature could not be verified. Am I doing somthing wrong or does it have to do with when i updated with keis. Any help would be appreciated.
Click to expand...
Click to collapse
Just to let you know, chances are the first time, when your phone appeared to be frozen on the "S" screen, you just weren't patient enough. After updating, or doing a factory reset, the phone appears stuck on the "S" sreen for a long time, but it's just doing its thing. Next time have more patience with it, give it a good 15 mins.
Also to get root and do a 3e recovery mod to allow for clockworkmod update.zip to work, you need to go and read this:http://forum.xda-developers.com/showthread.php?t=925400

Thanks will do!

csmith177 said:
Thanks will do!
Click to expand...
Click to collapse
Can I make one more suggestion, I found those steps in the link to be confusing for a new user. Give it a try, but if you get confused, do what I did.
You already used kies mini, so you have the new second boot loader sbl.bin. Now to make things easier, and instead of rooting and modding 3e yourself. Just use odin to downgrade to JFD. Then root JFD using updaet.zip. Then add clockworkmod recovery to jfd. Next, go into the development section, and just get the already deodexed, rooted, and 3e recovery modded KA6 or Ka7 or Kb1 and install that using cwm, all the hard work is done for you, and the scary part of updating the sbl.bin was already done by kies mini. So you get the best of all worlds. But if that link I provided you is easy to follow, then just do that.

thanks again for ur 2nd advice.. I ended up usinf odin as you suggested and downgraded back to 2.1. Now it is fully rooted and I decided to install the axura 2.2.8 I love it!! and think I could easily become addicted to this forum

Related

[Q] Galaxy S Issues

Hi guys this is my first post if i post something that has been already talked to the death my apologies.
I recently bought a Samsung galaxy S with the 2.2 froyo update build number hvjp4 ive tried using the one click root but when i get to the recovery screen and click the "update.zip" file it say error signature verification.
what am i doing wrong can someone lead me in the right direction thank you.
GS issues
Did you install the drivers for the GS?
What recovery version do you have? you can see it at the top when in recovery mode. (3e) wont let you do it. your best off getting odin and flashing a new kernel.
this is what i done, works %100
http://forum.xda-developers.com/showthread.php?t=788108
etsme said:
What recovery version do you have? you can see it at the top when in recovery mode. (3e) wont let you do it. your best off getting odin and flashing a new kernel.
this is what i done, works %100
http://forum.xda-developers.com/showthread.php?t=788108
Click to expand...
Click to collapse
i did see this thread but i dont know which file to download in fear of bricking my sgs
You need to put the phone in Debug mode then run shell root and then root. I had a similar issue and thats how I was able to get it to work
What method are you trying to use to get root?
I went with SuperOneClick to root, Rom Manager from Market to flash Clockwork recovery, Nandroid backup, and then Custom ROM.

can't get into recovery on rooted Vibrant

I recently got a Samsung Vibrant that was already perm rooted (I think he said he used a one click method) the problem I am having is that when I go into recovery I get a blue menu. At that menu I select reload packages and it aborts with a not signed signature error. I can't get to the green recovery screen to flash Roms or do a Nandroid back up. Can anyone help me with this? Thanks
pdxmatts said:
I recently got a Samsung Vibrant that was already perm rooted (I think he said he used a one click method) the problem I am having is that when I go into recovery I get a blue menu. At that menu I select reload packages and it aborts with a not signed signature error. I can't get to the green recovery screen to flash Roms or do a Nandroid back up. Can anyone help me with this? Thanks
Click to expand...
Click to collapse
Download ClockWork's Rom Manager from the market "Rom Manager" and install their recovery from inside the app - hope this helps.
You can try to do the ROM manager flash CwMRecovery, boot into blue recovery choose "reinstall packages" and that should give you green recovery.
The above process may need to be repeated multiple times. Once you access green recovery choose "apply sdcard:update.zip" then choose "advanced" and "reboot recovery"
I personally don't think you should not be using any one click root app to aquire ROOT. I would suggest you uninstall any said app and ROOT your phone properly, you can use the GUIDE sticky and it should be fairly straight thru and easy. Good luck!
pdxmatts said:
I recently got a Samsung Vibrant that was already perm rooted (I think he said he used a one click method) the problem I am having is that when I go into recovery I get a blue menu. At that menu I select reload packages and it aborts with a not signed signature error. I can't get to the green recovery screen to flash Roms or do a Nandroid back up. Can anyone help me with this? Thanks
Click to expand...
Click to collapse
I would Odin back to stock and start over.
Here is info how to do it.
http://forum.xda-developers.com/showthread.php?t=849028
You can use the toolbox to do this
http://forum.xda-developers.com/showthread.php?t=954509
Just download SGS kernel flasher from the market and flash a voodoo injected kernel. You will then have voodoo red recovery. BOOM!
nomadrider123 said:
I would Odin back to stock and start over.
Here is info how to do it.
http://forum.xda-developers.com/showthread.php?t=849028
You can use the toolbox to do this
http://forum.xda-developers.com/showthread.php?t=954509
Click to expand...
Click to collapse
I did this method and it is back to stock and has lost it's root. I need to root it again. can you point me in the right direction for a good root process? I am new to the Vibrant. Knew everything about the myTouch 4G and now have to switch my thinking. It's quite different. I would appreciate it. Thanks
install rom manager and then do a clockwork recovery from thereonce u have that done. Then u get the update package and do the 3 button combo and u will be on a blue screen and then install packages u will have to do this twice. after that it will turn green and ur there and rooted.
Ok, it's just not reinstalling packages for me again. I used Odin to get back to stock, and I lost root and was back on 2.1 Eclaire. I used Super one click to get root back. Flashed Rom Manager. Went into recovery with volume up and down and power. I was able to install packages and it worked and got me to green CWM. Then I installed the 2.2 update using Keis, flashed Rom Manager. I went back into recovery, I got the blue screen again. Tried to reinstall packages and it aborted again with signature error, tried multiple times and no go. What is up! I just can't get it to work. I certainly do not want to stay on 2.1 Eclair.
pdxmatts said:
Ok.............I used Super one click to get root back................ I was able to install packages and it worked and got me to green CWM. Then I installed the 2.2 update using Keis...............I certainly do not want to stay on 2.1 Eclair.
Click to expand...
Click to collapse
I honestly think the signature issue is due to kies update or the one click root option. (prob the kies update but not sure)
- This is the method I use to ROOT and would suggest everyone use as well:http://forum.xda-developers.com/showthread.php?t=723479. Once in green recovery I would recommend making a nandroid backup before moving on.
- I would not recommend using kies to update to 2.2.
If you just want stock 2.2 I would suggest try this: http://forum.xda-developers.com/showthread.php?t=1036193. I would suggest you use the CwM version opposed to the ODIN version for reasons stated by OP there.
- Honestly I would search the Vibrant Android Development thread and take a look at some other custom ROMs you might like. You might like Bionix1.3.1 its 2.2 firmware and the theme and mod option support is out of this world. There are alot of 2.2.1 ROMs available as well you might like.
Take a look at the Bible for options: http://forum.xda-developers.com/showthread.php?t=991267
pdxmatts said:
I recently got a Samsung Vibrant that was already perm rooted (I think he said he used a one click method) the problem I am having is that when I go into recovery I get a blue menu. At that menu I select reload packages and it aborts with a not signed signature error. I can't get to the green recovery screen to flash Roms or do a Nandroid back up. Can anyone help me with this? Thanks
Click to expand...
Click to collapse
You need to install a stock recovery replacement that doesn't check the signature. http://forum.xda-developers.com/showthread.php?t=833423 tells how. Or just Odin back to a firmware from before signature checking in the recovery screen was activated, but then you may have to re-root your phone.
The version of 2.2 that Kies installs has the signature checking recovery, so if you're running with that, you'll have to replace your recovery. Anything earlier, and you should be fine without.
I just want to say thank you to everyone for being so helpful. TMO is sending me a replacement because I was having freezing issues and email notifications not working. I will definitely root it the correct way and use all your helpful links. I think my next phone is going to be the SGS II. Can't wait for the US release
why do you need the kies update if you just wanna flashed a custom rom? you dont need to
flipnotiq said:
why do you need the kies update if you just wanna flashed a custom rom? you dont need to
Click to expand...
Click to collapse
Are you saying that all Rom's run on 2.1? I tried Darky's 9.5 Rom and it fc'sd everything and threw my phone into constent ringing.
I think the BIG issue is just NOT to do the samsung kies update thats what borks things up. Its easier to root everything from 2.1 and then if you want 2.2 or 2.2.1 or 2.3 just flash custom ROMs. If you want to do the official samsung kies update I would suggest not to ROOT at all. Just get your new phone and update it. Good luck!
I definitely want to root it. I changed Rom's all the time on my myTouch 4G. I'll get it worked out
Awesome! I'm sure you'll get it just the way you want it, personalized to fit your tastes. Just keep in mind to stick with custom ROMs after you ROOT and not to do the samsung kies update. There are a number of GREAT 2.2 and 2.2.1 custom ROMs available for our device with little or no bugs at all thanks to the hard werk of multiple Devs and Dev teams with unlimited theme and modification options, hope you find exactly what your looking for. Good luck!
need help. i flashed 2.3.3 and it wont go into recovery now. tried both 3 button combo and rom manger into recovery. just reboots my phone
After you flash the update.zip and get root. You dont have to do the kies update in order to flash other roms. Just root and dont do the kies update. Remember after you flashed a custom rom wait 10 minutes n reboot. Theres alot of guides in here . Check the stickies. I would recommend trigger 3.2 with bullet
Sent from my SGH-T959 using XDA Premium App
Thank you to everyone for your help. I got my replacement today. It's like brand new I rooted the correct way and was able to get a Rom and kernal to load just fine on 2.1. Now have Red Voodoo menu in recovery. All is great now that I figured it out. Thanks again.
Glad it work out just fine.
Fast Dont Lie

[Q] error msg in reboot

Well, first off, I FINALLY ROOTED !!!!!!.....samsung fascinate.I500...2.2.2.....edo5.........rooted with SIMPLE ONE CLICK.......... achieved SUPER USER........downloaded ROM MANAGER........however.......when i try to flash ANY rom, i get error msg " FAILED TO VERIFY WHOLE-LIFE SIGNATURE".....". SIGNATURE VERIFICATION FAILED "....
"INSTALLATION ABORTED"
ANY IDEA WHY I GET THIS ?..........thanks.Dennis
Flashing or installing a recovery on a stock kernel gets reset at boot. You need to flash recovery (cwm) in odin with battery out, insert batt and 3 finger into recovery and flash a custom kernel to get recovery to stick.
good day.
???
hi, and thanks for reply........im sorry but im obviously newbie. can you give advice on how exactly i can acheive your suggestion ?.......i dont know what ODIN is or even how to do this
thanks
dennis
What exactly are you trying to flash? Or what rom are you looking to be on?
good day.
well, like i said, im newb, so i tried the ROM MANAGER app.......and it lists only a few ROMs. but any i try i get same error.
btw, i would like to be on Cynogen, or fresh
Don't really recommend Rom Manger...
-Download Odin.
-Download CWM4 fixed for CM7... HERE. (Bottom of JTs post)
-Copy the ROM you wish to use onto your SD card anywhere.
-Open Odin
-Phone off, remove the battery, hold down volume button, plug in USB cord
-Should go into download mode, shown on the screen of your phone, and show show up as connected in Odin.
-Using PDA Button (Never use phone button in ODIN!) flash the CWM4 for Odin file you downloaded. DON'T do anything until it says success, finished done, etc, just don't stop mid flash. Shouldn't take that long, and your phone should turn back off.
-Reinsert the battery, do the three finger recovery (DO NOT let the phone boot back up otherwise you'll need to reflash recovery)
-Choose install ROM from SD card, choose the rom, CM7 or whatever you downloaded, and flash it.
-Now that's going from memory, so it might not be exactly "install rom from sd card", I think it actually says "install .zip from sd card" or something like that but you get the idea.
- I would recommend backing up all your data, and then wiping cache, dalvik, and data before flashing a new ROM.
- If going to CM7, MIUI, OMGB OMFGB, VGB, etc, any 2.3 based rom you'll want to ODIN the GB_Bootloaders too.
Superoneclick has had problems on 2.2.2 ed05. If you odin the stock ed05 package from pentafive, you dont need to flash a modified kernal to get cwm to stick! Also there is no need to root if your installin a rom, it will already be rooted. My suggestion is to start with powerwashed 1.2 rom get familiar with what you are doing before messing around with mtd gingerbread roms.
Here is directions http://forum.xda-developers.com/showpost.php?p=16566628&postcount=285
odin ?
well my problem is im newbie lol...........i dont know what ODIN is, nor do i know how to flash PENTAFIVE package..........i realize im being a PITA on these forums, but i really need someone to step-bystep me thru this
icemanwbs said:
well my problem is im newbie lol...........i dont know what ODIN is, nor do i know how to flash PENTAFIVE package..........i realize im being a PITA on these forums, but i really need someone to step-bystep me thru this
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1053567
http://forum.xda-developers.com/showthread.php?t=1124391
http://forum.xda-developers.com/showthread.php?t=1013312
Sent from my SCH-I500 using XDA App
icemanwbs said:
well my problem is im newbie lol...........i dont know what odin is, nor do i know how to flash pentafive package..........i realize im being a pita on these forums, but i really need someone to step-bystep me thru this
Click to expand...
Click to collapse
click the link and read!!!!!!!!!!!!!!!!!!! This is all the step by step instructions you need. The link efan450 is good too, but the link I posted has everything you need right there!!!!
icemanwbs said:
btw, i would like to be on Cynogen, or fresh
Click to expand...
Click to collapse
If you don't have any clue what ODIN is, or what CWM is, or even how to spell Cyanogen correctly, you have no business at all even thinking about being on CyanogenMod 7. Have to learn to crawl before you can walk before you can run. Read the stickies, read the stickies again, read the stickies again, know what you are doing and understand what you are doing before doing anything to your phone, then start simple with a debloated/deodexed stock rom or powerwash ED05.
+1
There's no trick or magic or easy fix for rooting. Its all about experience. Once you've flashed 20 ROM's+...you'll understand!
I know that some of these are 150+ pages long, I KNOW...I've read them all! Trust me when I tell you, each page is money!
You've got an amazing machine, go read some of the ROM postings and learn the lingo, the steps, the problems and fixes. then root your fascinate.
You'll be glad you did.
sent from outerspace
Root and Rom completed. Special thanks to droidstyle. Powerwash working very smooth.
Sent from my SCH-I500 using XDA App

[Q] Flashing ROM

Okay so Im trying to flash a rom, I have rooted it with super one click method. Im trying to flash a rom.
Usually in all the other phones that I have rooted and flashed sensation mt4g g2 g2x you root it then simply move on to CWM then you flash a recovery. It seems like the recovery isnt sticking..
I have looked for guides on how to flash. But a lot of them say there outdated.
Any ways if someone could give me a clue and point me in the right direction that would be lovely thanks!
Jerald2 said:
Okay so Im trying to flash a rom, I have rooted it with super one click method. Im trying to flash a rom.
Usually in all the other phones that I have rooted and flashed sensation mt4g g2 g2x you root it then simply move on to CWM then you flash a recovery. It seems like the recovery isnt sticking..
I have looked for guides on how to flash. But a lot of them say there outdated.
Any ways if someone could give me a clue and point me in the right direction that would be lovely thanks!
Click to expand...
Click to collapse
you need to odin a stock modified kernal.tar in order to get cwm to stick. Here it is:
http://goo.gl/QCYxT
If you need odin and samsung drivers, there in my guide here:
http://forum.xda-developers.com/showthread.php?t=1238070
Remember to only put the file in the PDA function of odin...
Okay thanks very much this odin thing is very different from what I'm used to.
Am I going to extract these files? obviously not drivers, but Odin files I extracted. Am I going to extract the kernal.tar?
I'm trying to install Miui its 2.3.4 so im guessing that other guide is the right one can someone confirm that this is safe?
http://forum.xda-developers.com/showthread.php?t=1212239
Sent from my HTC Sensation 4G using XDA App
Jerald2 said:
Okay thanks very much this odin thing is very different from what I'm used to.
Am I going to extract these files? obviously not drivers, but Odin files I extracted. Am I going to extract the kernal.tar?
I'm trying to install Miui its 2.3.4 so im guessing that other guide is the right one can someone confirm that this is safe?
http://forum.xda-developers.com/showthread.php?t=1212239
Sent from my HTC Sensation 4G using XDA App
Click to expand...
Click to collapse
Yes use that guide
Someone Please please please help. This is my girlfriends phone i finally talked her into letting me root/flash it. Its not going right!!!!
Okay so im following that guide I got to step 4, it said boot up normally. It wouldnt boot up so I kept going.
Got to step 7 and this is what happens. http://www.youtube.com/watch?v=hwQMaQD2x7w
When I first open Clock work it says
E:Cant mount cache/recovery/command
E:Cant mount cache/recovery/Log
E:Cant open cache/recovery/Log
E:Cant mount cache/recovery/Last Log
E:Cant open cache/recovery/Last Log
Someone Please Please help.
edit: your not following the directions clearly... The problem is you continued past step 4 without letting your phone boot up. If you dont follow directions to a T you will brick your phone.
Okay, listen carefully. Go to jt1134's CM7 thread in fascinate development section. Go to the first page, scroll down until you see CWM fixed for CM7, download it. Use Odin to flash full stock ED05 with atlas 2.2 pit file, check the box for repartition, then hit start. Boot up, then power down and take battery out. Flash the CWM fixed for cm7 in Odin, unplug from computer, put battery back in, then (this is important!) hold both volume buttons and the power button until you see Samsung logo, then release. You will then be in the right recovery to flash any MTD ROM. Wipe all three, flash ROM, reboot. Also go to stickies in fascinate development, read "Going from Vanilla GB to anything else" thread. It will give you more details and is properly updated. Good luck!
~~~~There is no spoon~~~~
So where do you suggest I start to get thus thing at least back to stock?
sorry didnt see ya posted there. K I will Give that a shot seriously thank you.
Sent from my HTC Sensation 4G using XDA App
Jerald2 said:
So where do you suggest I start to get thus thing at least back to stock?
Sent from my HTC Sensation 4G using XDA App
Click to expand...
Click to collapse
I gave you the link that provides all that information
---------- Post added at 12:13 PM ---------- Previous post was at 12:12 PM ----------
shag_on_e said:
Okay, listen carefully. Go to jt1134's CM7 thread in fascinate development section. Go to the first page, scroll down until you see CWM fixed for CM7, download it. Use Odin to flash full stock ED05 with atlas 2.2 pit file, check the box for repartition, then hit start. Boot up, then power down and take battery out. Flash the CWM fixed for cm7 in Odin, unplug from computer, put battery back in, then (this is important!) hold both volume buttons and the power button until you see Samsung logo, then release. You will then be in the right recovery to flash any MTD ROM. Wipe all three, flash ROM, reboot. Also go to stickies in fascinate development, read "Going from Vanilla GB to anything else" thread. It will give you more details and is properly updated. Good luck!
~~~~There is no spoon~~~~
Click to expand...
Click to collapse
all that info is in the link i provided for him
here is the going back to stock section in that link I provided.
* How to get back to stock after flashing any rom, follow these steps:
Step 1: Download this stock ed05 rom package by pentafive to your pc. you will need to unzip with 7zip or winrar, http://api.viglink.com/api/click?fo...144787558901&jsonp=vglnk_jsonp_13175749481381
Step 2: power off phone and pull battery
Step 3: open odin on your computer
Step 4: plug in factory usb cable and hold the volume down button. Yellow
triangle should appear saying "download mode"
Step 5: click on PDA in odin and find the vzw_official ed05.tar file(rom) you downloaded to your computer in step 1
Step 6: click on PIT in Odin and select the atlas 2.2 pit, it's in the file you downloaded in step 1
Step 7: click start and wait 5min, box in left hand corner of odin will say PASS, then click reset.
Step 8: unplug usb cable, put battery back in and boot phone.
You are now back to stock ed05.(verizon's latest release for the Fascinate)
shag_on_e said:
2.2 pit file, check the box for repartition, then hit start. Boot up,
Click to expand...
Click to collapse
When you mean boot up, what do you mean like start it normally? The last guide said that and it wouldnt boot up.
Also Is this it? http://forum.xda-developers.com/showthread.php?t=1190668?
That Link you gave me when I click on it. I only get "Parameter 'out' is required." bad link?
you can go back to original link on my first post and get everything there lol, but being the nice guy I am I went ahead and fixed the link.
Alright. So I got followed your guide and got cwm installed. I made a nandroid. I wiped everthing and flashed MIUI It booted up and runs. So im on step 8 on http://forum.xda-developers.com/showthread.php?t=1212239
When I try and install a app it says insufficient storage on device.
Is this because I didnt install ec09-modem.tar.md5 and GBBootloaders.tar?
I know that im not going to need to install Gaps. But I want to make sure these things ^^ up there are the right things for my rom.
I went ahead and risked it haha. It worked. Okay so now.. It says that I dont have root. Would I be okay to use the superone click method again to root it?
Jerald2 said:
Alright. So I got followed your guide and got cwm installed. I made a nandroid. I wiped everthing and flashed MIUI It booted up and runs. So im on step 8 on http://forum.xda-developers.com/showthread.php?t=1212239
When I try and install a app it says insufficient storage on device.
Is this because I didnt install ec09-modem.tar.md5 and GBBootloaders.tar?
I know that im not going to need to install Gaps. But I want to make sure these things ^^ up there are the right things for my rom.
I went ahead and risked it haha. It worked. Okay so now.. It says that I dont have root. Would I be okay to use the superone click method again to root it?
Click to expand...
Click to collapse
power off and pull battery, get back to dl mode, open odin and install the eco9 modem and gb bootloaders. reboot and see if everything is working. If you still dont have root and you may not, follow what directions below.
- superoneclick wont work.
-push this file below to you sd card
- long press the power button and select recovery(do not three finger into recovery once your on a mtd rom)
- install zip from sd like you did the rom.
http://dl.dropbox.com/u/25089906/su-2.3.6.1.x.zip
-you should now have root
Okay Ill do that THANKS SOOOOO MUCH!!
Is Clock work going to stick? Do I need to install rom manager and flash the newest one?
I tried to go into CMW through long press home and click recovery. It says Multiple packages tries to request sytem root permission wich is disabled by default to ensure system security. If you need to enable it, please go to setting in super user.
Witch im not seeing anyting
Jerald2 said:
Okay Ill do that THANKS SOOOOO MUCH!!
Is Clock work going to stick? Do I need to install rom manager and flash the newest one?
Click to expand...
Click to collapse
The kernal is already modified to allow cwm to stick and you should already have the latest kernal with the version of miui that you flashed. Im not a fan of rom manager, but thats just my opinion. Fwiw the only other kernal I would mess with is the glitch kernal. That has to be installed via odin. go into the dev section and look up the glitch kernal thread and read up on it. But before you do any of that, just get the phone up and running for a day, then go from there.
Yeah haha I just need to get root so I can back up her stuff.
But its not letting me get into recovery because it says that I dont have root. How am i supposed to get into it?
Jerald2 said:
Yeah haha I just need to get root so I can back up her stuff.
But its not letting me get into recovery because it says that I dont have root. How am i supposed to get into it?
Click to expand...
Click to collapse
If it won't let u get into cwm by long pressing power button then power phone off and try three finger into recovery(not suppose to do that with a mtd rom tho). Your only other option I know of is:
-odin back to stock
- boot up once then power off
-odin cwmall.tar from my guide
-three finger boot into recovery
-install root.zip from post 14
-reboot then power off
-odin cwm4
-three finger boot into recovery
-install miui.zip from sd
-reboot
-follow directions from step 8 on in the vanilla guide.

Can't Flash any Rom

Greeting Devs & thanks in advance.
My t959 got bricked where it wouldn't go passed the vibrant screen, found a post called ** [GUIDE] FIX AND RESCUE YOUR VIBRICK + ODIN SUPPORT! N00b Friendly ** followed instructions on it to take it back to stock with Odin, rigth now my phone is running Android 2.1 eclair, rooted and with CWM Recovery version 2.5.1.2. im trying to flash a custom rom and when i go into recovery mode and try to do it, the progress bar at the bottom comes up and when it is at about 10% the phone reboots back to the vibrant screen and wont go passed it so i have to take the battery out put it back in and get the phone into download mode to retake it back to stock using ODIN, so i guess is safe to say that my phone gets bricked whenever i try to install a custom rom so im stuck with eclair wich blows specially after having 4.2.2
my phone got bricked the first time when i was trying to update the rom from SlimBean 4.2.2 Build 7 to Build 8 (had done the process many times and never had a problem) did the usual, put the Rom and the Gapps .rar files in the sd card and performed wipe data/ factory reset only this time i went into mounts and storage and wiped everything that was under there as well (dont know why) so when went to flash the rom it was no longer on the sd card (cause i wiped it) so rebooted my phone and it got stuck on the vibrant screen with i fixed already and my problem now is the one mentioned above
i have browsed the different forums and have tried many different methods to try to fix it for example: have brought it back to stock with Odin also with AIO Vibrant Toolbox and even tried UVKB5_Stock_Heimdall-One-Click wich is a froyo 2.2 that comes with CWM recovery with voodoo lag fix and root. even though all these methods work as far as bringing the phone back to stock i still get the same problem when trying to flash a rom, i also have installed CWM through Rom manager and also through the update.zip file i think im doing everything right and have tried multiple forums yet havent been able to find a forum about this specific issue so decided to create this thread as a last resource
this is my first post and id really appreciate any assitance and if any additional information is needed ill be happy to provide it, thanks in advance
This worked for me
elpromo01 said:
Greeting Devs & thanks in advance.
My t959 got bricked where it wouldn't go passed the vibrant screen, found a post called ** [GUIDE] FIX AND RESCUE YOUR VIBRICK + ODIN SUPPORT! N00b Friendly ** followed instructions on it to take it back to stock with Odin, rigth now my phone is running Android 2.1 eclair, rooted and with CWM Recovery version 2.5.1.2. im trying to flash a custom rom and when i go into recovery mode and try to do it, the progress bar at the bottom comes up and when it is at about 10% the phone reboots back to the vibrant screen and wont go passed it so i have to take the battery out put it back in and get the phone into download mode to retake it back to stock using ODIN, so i guess is safe to say that my phone gets bricked whenever i try to install a custom rom so im stuck with eclair wich blows specially after having 4.2.2
this is my first post and id really appreciate any assitance and if any additional information is needed ill be happy to provide it, thanks in advance
Click to expand...
Click to collapse
Mine would remove the root when I rebooted it not allowing me to install a rom also. I used the Super One Click and the root stuck. I suggest you give it a try.
Super One Click
seerenr since
Devil-Dog said:
Mine would remove the root when I rebooted it not allowing me to install a rom also. I used the Super One Click and the root stuck. I suggest you give it a try.
Super One Click
Click to expand...
Click to collapse
my problem is not really with rooting the phone, it is rooted i just cant flash roms. whenever i try to flash a rom it reboots and gets stuck on the vibrant screen (bricked) so i have to take it back to stock
thanks though
elpromo01 said:
Greeting Devs & thanks in advance.
My t959 got bricked where it wouldn't go passed the vibrant screen, found a post called ** [GUIDE] FIX AND RESCUE YOUR VIBRICK + ODIN SUPPORT! N00b Friendly ** followed instructions on it to take it back to stock with Odin, rigth now my phone is running Android 2.1 eclair, rooted and with CWM Recovery version 2.5.1.2. im trying to flash a custom rom and when i go into recovery mode and try to do it, the progress bar at the bottom comes up and when it is at about 10% the phone reboots back to the vibrant screen and wont go passed it so i have to take the battery out put it back in and get the phone into download mode to retake it back to stock using ODIN, so i guess is safe to say that my phone gets bricked whenever i try to install a custom rom so im stuck with eclair wich blows specially after having 4.2.2
my phone got bricked the first time when i was trying to update the rom from SlimBean 4.2.2 Build 7 to Build 8 (had done the process many times and never had a problem) did the usual, put the Rom and the Gapps .rar files in the sd card and performed wipe data/ factory reset only this time i went into mounts and storage and wiped everything that was under there as well (dont know why) so when went to flash the rom it was no longer on the sd card (cause i wiped it) so rebooted my phone and it got stuck on the vibrant screen with i fixed already and my problem now is the one mentioned above
i have browsed the different forums and have tried many different methods to try to fix it for example: have brought it back to stock with Odin also with AIO Vibrant Toolbox and even tried UVKB5_Stock_Heimdall-One-Click wich is a froyo 2.2 that comes with CWM recovery with voodoo lag fix and root. even though all these methods work as far as bringing the phone back to stock i still get the same problem when trying to flash a rom, i also have installed CWM through Rom manager and also through the update.zip file i think im doing everything right and have tried multiple forums yet havent been able to find a forum about this specific issue so decided to create this thread as a last resource
this is my first post and id really appreciate any assitance and if any additional information is needed ill be happy to provide it, thanks in advance
Click to expand...
Click to collapse
What version of android are the ROMs you are flashing?
are they above or below android 2.3?
and on the same note, do you know what bootloader you have?
some roms 2.3 and above require gingerbread bootloaders.
(an easy way to find out is by figuring out which button combo you have to use to get to recovery)
you might also try re-flashing recovery.
firefly6240 said:
What version of android are the ROMs you are flashing?
are they above or below android 2.3?
and on the same note, do you know what bootloader you have?
some roms 2.3 and above require gingerbread bootloaders.
(an easy way to find out is by figuring out which button combo you have to use to get to recovery)
you might also try re-flashing recovery.
Click to expand...
Click to collapse
i have re-flashed recovery multiple times i wish there was another type of recovery i could install
on another note im trying to install android 4.2.2 SlimBean and 4.3.3 and i dont know what bootloader i have nor how to check it, id appreciate it if u could show me how to check wich one i have and how to up it
thanks
firefly6240 said:
What version of android are the ROMs you are flashing?
are they above or below android 2.3?
and on the same note, do you know what bootloader you have?
some roms 2.3 and above require gingerbread bootloaders.
(an easy way to find out is by figuring out which button combo you have to use to get to recovery)
you might also try re-flashing recovery.
Click to expand...
Click to collapse
the combo i have to do for recovery is volume up and down and the power button simultaniosly
elpromo01 said:
the combo i have to do for recovery is volume up and down and the power button simultaniosly
Click to expand...
Click to collapse
Try flashing a 2.2 rom or below.
if that works you probably just need to flash GB bootloaders before flashing the 4.2 rom (See Below)
if that doesn't work I wouldn't worry about the step below until we figure out why its not working.
To flash GB bootloaders go here: http://forum.xda-developers.com/showthread.php?t=1117990
firefly6240 said:
Try flashing a 2.2 rom or below.
if that works you probably just need to flash GB bootloaders before flashing the 4.2 rom (See Below)
if that doesn't work I wouldn't worry about the step below until we figure out why its not working.
To flash GB bootloaders go here: http://forum.xda-developers.com/showthread.php?t=1117990
Click to expand...
Click to collapse
ok so i installed GB bootloader following the instructiones as shown in the forum, went ahead an tried to flash Slimbean 4.2.2 build 8 and the same thing happened my phone is stock at the boot screen only different is that instead of the vibrant screen im getting a semaphore screen (i guess is because of the gb bootloader) anyway flashed back to stock using Odin and im back where i started so it doesnt seem to be a bootloader related issue
thanks anyway
elpromo01 said:
ok so i installed GB bootloader following the instructiones as shown in the forum, went ahead an tried to flash Slimbean 4.2.2 build 8 and the same thing happened my phone is stock at the boot screen only different is that instead of the vibrant screen im getting a semaphore screen (i guess is because of the gb bootloader) anyway flashed back to stock using Odin and im back where i started so it doesnt seem to be a bootloader related issue
thanks anyway
Click to expand...
Click to collapse
Flash the rom again instead of going back to stock when it hangs. You have to flash JB roms twice most of the time when you are on stock 2.1, the first flash simply upgrades your recovery mode. Pull the battery after the first flash and boot back into recovery (should be blue now) and flash the rom again.
Sent from my SGH-T959 using Tapatalk 2
iTz KeeFy said:
Flash the rom again instead of going back to stock when it hangs. You have to flash JB roms twice most of the time when you are on stock 2.1, the first flash simply upgrades your recovery mode. Pull the battery after the first flash and boot back into recovery (should be blue now) and flash the rom again.
Sent from my SGH-T959 using Tapatalk 2
Click to expand...
Click to collapse
i just fixed, i tried to flash CM10.1 and it crashed during the process only this time instead of getting stuck on the Vibrant screen it rebooted back into the recovery mode wich is now blue and version 6.0.2.1 intead of 2.5.1.2.
im running CM10.1 right now and so far everything looks good :laugh: only thing different now is that it say Galaxy S GT-I9000 and is the t959, doesnt really bother me as long as the phone behaves im just sayin
thanks to everyone that took their time to help, never give up on a Vibrant cause it will never give up on you :good:
elpromo01 said:
i just fixed, i tried to flash CM10.1 and it crashed during the process only this time instead of getting stuck on the Vibrant screen it rebooted back into the recovery mode wich is now blue and version 6.0.2.1 intead of 2.5.1.2.
im running CM10.1 right now and so far everything looks good :laugh: only thing different now is that it say Galaxy S GT-I9000 and is the t959, doesnt really bother me as long as the phone behaves im just sayin
thanks to everyone that took their time to help, never give up on a Vibrant cause it will never give up on you :good:
Click to expand...
Click to collapse
Glad you figured it out. Just so you you know, your phone says GT-I9000 because you flashed gingerbread bootloaders. They provide better button combinations to recovery and download modes, much easier than stock combos.
Sent from my SGH-T959 using Tapatalk 2
Good to know, thanks!!
Sent from my SGH-T959 using xda app-developers app

Categories

Resources