[Q] SMS cost saving? - XPERIA X10 Q&A, Help & Troubleshooting

I noticed that after updating to latsest firmware(2.1.A.0.435)
the option of "enable cost saving" in messages,has dissapeared.
And unfortunately if i use downcase greek letters,i can send only 60 characters per 1 message.
Is there anything i can do?
damn you se.once again you made my life difficult

Related

[Q] SMS Trouble

I find since the 2.1 update (Rogers/x10a) a lot of my SMS are not going through. I keep getting the "message not sent" notification. (THIS IS NOT THE SAME AS 160+ CHARACTERS PROBLEM)
Am I the only one with this problem since the update? If so, hopefully I can get a new phone from Rogers
Have tried the *#*#4636#*#* and looked at the SMSC. Is always blank. Even when SMS is working.
Help?
EDIT: The problem here is Task Killers (ATK, for me). If Auto Kill is set to Aggressive it interfere's with sending SMS. If set to Safe there is no problem whatsoever.
i have the same problem
my rogers canada x10a also has a tiny bit of trouble sending sms messages after the update. i was considering reflashing because of it. i have found that every time i try to send a message that it has to split in to more than one message it fails.
hope this might aid in diagnosis with someone that knows more about this issue.
i haven't tried to play with it enough to recreate the problem consistently but if their standard character cap is different that could cause problems i suppose.
Edit:
i just attempted to recreate my problem for sake of being constructive.
for curiosity sake i went into the 4636 menu first. i should have done this after.
my smsc was also blank so i hit refresh and the field populated with: "+17057969300",145
that doesnt make a lot of sense to me looking like a phone number with too many digits. i dont know what the 145 was about either
i then went on to send a text message to myself starting with 140 chars then 144, 145, 146, 150, 160, and 180
it did warn me after 150 that i was sending 2 sms messages but they all worked
results: inconclusive
gooph said:
my rogers canada x10a also has a tiny bit of trouble sending sms messages after the update. i was considering reflashing because of it. i have found that every time i try to send a message that it has to split in to more than one message it fails.
hope this might aid in diagnosis with someone that knows more about this issue.
i haven't tried to play with it enough to recreate the problem consistently but if their standard character cap is different that could cause problems i suppose.
Edit:
i just attempted to recreate my problem for sake of being constructive.
for curiosity sake i went into the 4636 menu first. i should have done this after.
my smsc was also blank so i hit refresh and the field populated with: "+17057969300",145
that doesnt make a lot of sense to me looking like a phone number with too many digits. i dont know what the 145 was about either
i then went on to send a text message to myself starting with 140 chars then 144, 145, 146, 150, 160, and 180
it did warn me after 150 that i was sending 2 sms messages but they all worked
results: inconclusive
Click to expand...
Click to collapse
Your problem could be because you're with a different carrier. Bell? I know bell has capped at 150 characters I believe. Also, if you are on a different carrier I'm assuming the SMSC are different.
However, I am able to send SMS over 160 characters. Never had a problem with that. It's more of an annoyance. 1/15-20 of my messages doesn't go through. It's just bloody annoying.
paulsandhu said:
Your problem could be because you're with a different carrier. Bell? I know bell has capped at 150 characters I believe. Also, if you are on a different carrier I'm assuming the SMSC are different.
However, I am able to send SMS over 160 characters. Never had a problem with that. It's more of an annoyance. 1/15-20 of my messages doesn't go through. It's just bloody annoying.
Click to expand...
Click to collapse
I have to apologize. i just haven't changed that in my account here yet. i just switched from bell to rogers.
also:
all the random test messages i sent to myself before i posted that worked but i still am having problems sending 2+ sms messages to other people consistently.
I think this issue is related to Rogers' crappy network. Everyone I know on Rogers right now (in London Ont at least) is experiencing the same problem regardless of the device they're using. Damn you ROBBERS!!
I'm having this problem since I updated to 2.1, I can't send more than 160 characters in SMS. If it's more than 160 it fails to send it. Is there any solution to this? TIA
gooph said:
i just attempted to recreate my problem for sake of being constructive.
for curiosity sake i went into the 4636 menu first. i should have done this after.
my smsc was also blank so i hit refresh and the field populated with: "+17057969300",145
that doesnt make a lot of sense to me looking like a phone number with too many digits. i dont know what the 145 was about either
i then went on to send a text message to myself starting with 140 chars then 144, 145, 146, 150, 160, and 180
it did warn me after 150 that i was sending 2 sms messages but they all worked
results: inconclusive
Click to expand...
Click to collapse
THANX I have had problems with sending large (above 160) sms's, after update to 2.1, but then i saw this, and gave it a try, and it worked, so for all others, try the 4636 menu, and hit refresh, helped for me
But But ..........after reboot the same problem again...........grrrr, then what to do!!!???
I know all providers have **** networks but I don't think that this is the problem. Since 1.6 I've NEVER experienced this issue with SMS. But dropped calls and **** reception? Yes.
I don't know if this is a firmware issue or not. Im thinking it is.
This is happening to many people in the UK too since the 2.1 update. So it's certainly not exclusive to your operator but something cocked up in the update.
I even had this problem on 1.6, it happens mainly between me and my girlfriend. Its a nightmare. Sometimes all is ok and others just won't send and sometimes it sends when it says can not send so god knows!!
Sent from my X10i using XDA App
**** sony ericsson .. and rogers
Hi all. I live in Denmark and have the same problem. I amusing CHOMPsms an belived that it was the app that was The problem but i dont think anymore. I can't enter that menu 4636. Help!
Regards Allan
Sent from my X10i using XDA App
I too had this problem on O2 Ireland after the 2.1 Android update.
Simple answer to the problem is that the update screws up one or two lines in the APN on the phone. All you should need to do to sort this out is find out your carriers APN settings and manually input them. As soon as I did this all worked beautifully.
Settings > Wireless & Networks > Mobile Networks > Access Point Names > "Carrier Name" (Internet)
Change this and in theory you should be working again.
DBSS said:
I too had this problem on O2 Ireland after the 2.1 Android update.
Simple answer to the problem is that the update screws up one or two lines in the APN on the phone. All you should need to do to sort this out is find out your carriers APN settings and manually input them. As soon as I did this all worked beautifully.
Settings > Wireless & Networks > Mobile Networks > Access Point Names > "Carrier Name" (Internet)
Change this and in theory you should be working again.
Click to expand...
Click to collapse
But doesn't this only affect the internet usage on the phone? I don't believe this is the same as the SMSC.
On another note, I happened to remove HTC Keyboard from my device as I thought this might be affecting the performance some how. And I don't know if it is a coincidence but my problem is gone.
Also, I noticed with the HTC Keyboard sometimes when I would send a message, the actual message would still be written on the "type message here" field.
2 birds, one stone ???
paulsandhu said:
But doesn't this only affect the internet usage on the phone? I don't believe this is the same as the SMSC.
On another note, I happened to remove HTC Keyboard from my device as I thought this might be affecting the performance some how. And I don't know if it is a coincidence but my problem is gone.
Also, I noticed with the HTC Keyboard sometimes when I would send a message, the actual message would still be written on the "type message here" field.
2 birds, one stone ???
Click to expand...
Click to collapse
If you delete the 145 in smsc and the , you Can send 2 messages but not 3 in one continous SMS. Do not go back when you have done it go directly to the homescreen. By the way I'm also from Denmark... Fu.... S/E
lucifax said:
If you delete the 145 in smsc and the , you Can send 2 messages but not 3 in one continous SMS. Do not go back when you have done it go directly to the homescreen. By the way I'm also from Denmark... Fu.... S/E
Click to expand...
Click to collapse
Hi
My problem was not sending SMS over 160 characters... It was sending them period. I would constantly get "Message not sent" notifications.
I realized the problem. It's not HTC Keyboard, but Advanced Task Killer. I had the setting for Auto Kill frequency set to aggressive. This somehow interfered with sending SMS for my phone. I set it to Safe and it is fine. But if I switch back to Aggressive there is problems.

[Q] Disappearing SMS

A few times now I have had single SMS messages disappear from my phone. I use SMS Popup to display the incoming message. A few times after I click close on the pop-up the SMS has then vanished from my inbox - there is no record of it at all in the thread view. It has only happened a few times, with no obvious pattern.
Has anyone had a similar problem? Is there a fix?
I'm on a rooted, stock S3.
Thanks
I have similar problem. I do not receive all sms.
I found a fix you have to install Ghostly SMS.
This issue was repported to Google. Can't post outside link.
Look like a problem when you have low memory. I use a custom rom Omega v42 which limit text message to 1000. I just lower it to 200 to see what happen.
What is your SMS limit?
Are you running low in memory?

How to enable/disable sms compression

Hey guys, i'm using MeanRom 2.7 and I dont like that SMS compression has been turned off. Huge battery drain when every sms is megabytes to upload, not to mention network reliability..
Does anyonw know what is the way (or file to edit) to re-enable SMS compression?
You can change the option in the app to limit the sms size to 1mb but it'll shrink the resolution.
I just use Handcent SMS.
set it to a smaller limit
who woulda thunk? works. thank you.
Remove
Glad you got it solved. Just a FYI, it appears you were having problems with MMS (Multimedia Messaging Service) and not SMS (Short Message Service)

Popup on Dialer

Hi,
I have a ZTE N986 (Android 4.2.1) phone, it has dual SIM mode (CDMA & GSM) and I use them both.
Everytime I want to make a call using the GSM, there's this popup appears : http://tinypic.com/view.php?pic=o7sg93&s=5
With a little research, I find that it appears only if I use local number format in my country (Indonesia, which like "0211234567". Three first digits is Jakarta code by the way.) It doesn't show if I use international format (e.g. +62211234567).
Now it reads "China" in greyed box on top, I think it has to do with locale settings, so I change my language settings to Bahasa Indonesia but it doesn't work. I even done rooting in order to use MoreLocale app but it doesn't work either. And I can't find any settings or any app relating this popup.
Honestly it's not a big deal, I can still make a call by tapping "local call" on the popup, but you know, time I spend to solve this rather than, like change my contacts phone number format makes me even more curious.
Please help me, thanks in advance

Conquest S11 WhatsApp hibernation

Hello here ! I need help please if someone has the time to with my new smatphone "Conquest S11" bought from china, it's hard to found informations about this phone (there is not even one review of it yet)
So the problem is with WhatsApp application : I have delayed messages notifications and I can't take incoming calls (the phone is not ringing) ! :crying:
I did diagnostic the issue and I found that the phone's system (Conquest S11 stock ROM) kills the app by force (on boot also) and restart it after hours when it wants to, that's why I get delayed messages and can't receive calls at proper time (I get missing calls notifications a few moments later) ...
Can someone help me please !
Thanks if you give some times
Edit : I think it's the same bug with "Ok Google" voice detection because sometimes it works sometimes not (even on lock screen)
I searched more and I found that WhatsApp app is forced to stop by the system when I lock the device
I think it's the battery economy of the phone that is badly maked ...
There is 2 modes on battery settings : "high-performance" and "balanced", I set it on "high-performance" but it didn't solve the problem
Edit : I also set WhatsApp to "not optimized" on battery optimisation but still not working
No one
It hibernates it in less than 1 minute when I lock the screen !!!! ?
Why this fuc&€#@ phone kill WhatsApp ?!!!
I sent an email to WhatsApp Support saying this : "Hello, I really need help with your application, I explain: my new smartphone, the CONQUEST S11 (with Android 7.0), forces the application to stop when locked (in less than 30 seconds) which means I can not receive calls (video or audio) when the device is locked and I can not receive them until the system decides to re-open the application on background by itself or to open it myself manually; the same goes for messages ...
In the phone's battery settings, there is a "balance" mode and another "high-performance" mode which I opted for thinking that the problem comes from here and I also disabled battery optimization for Whatsapp (set on "Non optimized") but it not works ! Always the same worries unfortunately
That's why I'm contacting you hoping you can do something
Cordially"

Categories

Resources