Hello everyone,
I tried to hard reset my Vibrant phone using Odin but my PC crashes during the update and now I am unable to boot my phone and my PC don't recognize it, I have only this picture on my Vibrant even if I try the reboot with volume up+ volume down +power button
If someone can tell me how to fix it if I can.
img146.imageshack.us/img146/2586/p0602111148.jpg
Sorry for the image, I cannot post an image directly.
I had this before. It's another form of Download mode... you just have to keep messing with the phone and USB until the computer recognized it, then ODIN back to stock. It should work.
Thanks for your advices, I succeed to get again into download mode thanks to this website :
androidforums.com/vibrant-tips-tricks/223806-guide-fixing-bricks-odin-errors.html
Related
Help Guys i have a paperweight!
My samsung vibrant is totally bricked! I have tried many different meathods and all do not work at all. I even bought a jig off ebay! That doesn't even put it into download mode.
Please help!
Can someone please make my paperweight work again?
I was flashing a new baseband on the phone when Odin stalled for some reason. I accidentally disconnected my phone and now stuck on the phon!computer screen only!
Hi...
I had a similar situation with my phone.
When you get the "phon!computer screen" you should only connect the cable and start the flash with odin....
Try this and you could solve your problem...
i did it doesn't do anything!
When you have odin open, usb in the pc connected.... when you connect to phone while holding both volume buttons, does odin show a COM #?
if so, you should be okay... from that screen you can use odin.
well try this with phone off 1.take out battery 2.hold volume up and volume down together 3. while holding buttons down put battery back in 4.still holding buttons plug usb into it and should be in download mode .see if this helps http://www.youtube.com/watch?v=rqxearzXrVY here's a video might help to see it done
so i just got pissed and used odin3 and checked repartition and somehow after it failed. I pluged the phone in again and this time it finally went to download mode. Thanks everyon problem solved.
good to here
I usually work with iPhones so Android phones are a new field for me...
I have a friend who rooted his Samsung Galaxy Ace and then installed Android 2.3.4 but he decided to install something as he says that "doubles the ram memory of the device" well as soon as he installed this the phone immediatelly got bricked.
I have it here in my hands and I tried entering RECOVERY, DOWNLOAD mode and it was impossible.
So I tried pressing all the button (Vol+,Vol-, Home and Power) and the device was USB recognized by my PC,installed its own drivers but nothing showed up on the screen. Then I pressed Home and Power and USB sound ran again and from there on the phone does not react to any combination of buttons, taking out the battery or anything and the PC does not see it anymore.
I tried to be as specific as possible cause I really want to help this guy... So If anyone knows what are the possible solutions besides "take it to samsung care center" I'd really appreciate it!
Thansk!
Install KIES from Samsung so you have the drivers for the phone.
Install ODIN and run on your pc so you can flash a stock ROM (you don't need to have KIES running at the same time)
Take the battery out of the phone and connect it to the pc with ODIN running via USB.
If ODIN detects the phone put the battery back in and now you can flash with a stock rom and your phone will now work.
There are instructions on this forum where to find ODIN and how to load a ROM into it ready to flash.
have u tried the USB Jig?
http://tiny.cc/JIGACE
davebyone said:
have u tried the USB Jig?
http://tiny.cc/JIGACE
Click to expand...
Click to collapse
I'd save that for plan B, If it's showing up on a PC it's not bricked.
Bricked = no power, no response, no detect by pc no nothing.
cooltt said:
Install KIES from Samsung so you have the drivers for the phone.
Install ODIN and run on your pc so you can flash a stock ROM (you don't need to have KIES running at the same time)
Take the battery out of the phone and connect it to the pc with ODIN running via USB.
If ODIN detects the phone put the battery back in and now you can flash with a stock rom and your phone will now work.
There are instructions on this forum where to find ODIN and how to load a ROM into it ready to flash.
Click to expand...
Click to collapse
But Can I download any ODIN? Because I've seen through the forum that there are several ODINs for different Samsung Models... besides there are several ODIN versions! So which one do I need to download? Please a little help here cause in the Android field I'm still a noob!
Also as I told you, the first time the PC recognized the phone when I pressed ALL the buttons... but afterwards it does not recognize it anymore... does it have to do anything with that KIES you are just telling me about? Also which KIES should I download?
Thansk!
To me it doesnt wounds like its "Totally Bricked", take the battery out and leave if there for awhile, come back later on and see if you can enter download mode.
If you want you drivers to be installed correctly, download the KIES (2.1 i guess?) and get ODIN to reflash it.
we have a how to unbrick thread ....try d steps http://forum.xda-developers.com/showthread.php?t=1071970
QNBT said:
To me it doesnt wounds like its "Totally Bricked", take the battery out and leave if there for awhile, come back later on and see if you can enter download mode.
If you want you drivers to be installed correctly, download the KIES (2.1 i guess?) and get ODIN to reflash it.
Click to expand...
Click to collapse
rylegolas said:
we have a how to unbrick thread ....try d steps http://forum.xda-developers.com/showthread.php?t=1071970
Click to expand...
Click to collapse
Ok... this is as far as I have come.... The guide for unbricking seems good, there is only one problem. I've already Loaded ODIN with the firmware files and boot, and all those files. But I can NOT, I repeat I can NOT enter DOWNLOAD MODE (Vol-,Home, Power Buttons). I can only enter EMERGENCY DOWNLOAD MODE (Vol+,Vol-, Home and Power Buttons) and the good news is that ODIN is ABLE to recognize it, BUT as soon as I hit star it stays stuck at "<1> setup connection..." Well before you start saying to search forum for solutions, well I did, and I found this thread: http://forum.xda-developers.com/showthread.php?t=1188378
The guy had this same problem and he realized his problem was that he was entering EMERGENCY DOWNLOAD MODE rather than DOWNLOAD MODE. BUT I can NOT enter DOWNLOAD MODE the phone just doesn't enter this mode, only the EMERGENCY DOWNLOAD MODE so what can I do to make ODIN flash my phone!!????? Please help!!
pliundemix said:
Ok... this is as far as I have come.... The guide for unbricking seems good, there is only one problem. I've already Loaded ODIN with the firmware files and boot, and all those files. But I can NOT, I repeat I can NOT enter DOWNLOAD MODE (Vol-,Home, Power Buttons). I can only enter EMERGENCY DOWNLOAD MODE (Vol+,Vol-, Home and Power Buttons) and the good news is that ODIN is ABLE to recognize it, BUT as soon as I hit star it stays stuck at "<1> setup connection..." Well before you start saying to search forum for solutions, well I did, and I found this thread: http://forum.xda-developers.com/showthread.php?t=1188378
The guy had this same problem and he realized his problem was that he was entering EMERGENCY DOWNLOAD MODE rather than DOWNLOAD MODE. BUT I can NOT enter DOWNLOAD MODE the phone just doesn't enter this mode, only the EMERGENCY DOWNLOAD MODE so what can I do to make ODIN flash my phone!!????? Please help!!
Click to expand...
Click to collapse
USB Jig , and stop posting the same question twice
Sent from my GT-S5830 using XDA App
Ok So I finally did it. Bought the USB Jig! From here:
http://www.ebay.com/itm/Samsung-I910...90122901388427
And Guess What! IT DID NOT WORK!!!
This was my last resort and now I don't know what to do! But pay attention the funny thing, AS I mentioned earlier in ALL my posts! Is that the phone is recognized by ODIN but only in EMERGENCY DOWNLOAD MODE (It even says "COM PORT 18") But in this mode ODIN doesn't flash it, I needed DOWNLOAD MODE which was the reason why I bought the USB JIG, but it is not working! Is there a some kind of workaround to get the JIG working? PLEASE I REALLY REALLY need help!!!
Thanks!
pliundemix said:
Ok So I finally did it. Bought the USB Jig! From here:
http://www.ebay.com/itm/Samsung-I910...90122901388427
And Guess What! IT DID NOT WORK!!!
This was my last resort and now I don't know what to do! But pay attention the funny thing, AS I mentioned earlier in ALL my posts! Is that the phone is recognized by ODIN but only in EMERGENCY DOWNLOAD MODE (It even says "COM PORT 18") But in this mode ODIN doesn't flash it, I needed DOWNLOAD MODE which was the reason why I bought the USB JIG, but it is not working! Is there a some kind of workaround to get the JIG working? PLEASE I REALLY REALLY need help!!!
Thanks!
Click to expand...
Click to collapse
only thing you need is WARRANTY to go to service center....if you bricked by ROM Manager
and i can see you copy pasting problems from your thread to other threads ... why??
if someone can help you,they will.. don't spam with same posts
NO ONE REPORTED THAT USB JIG WORKS SUCCESSFULLY ON ACE as far as i see
So I already posted in both threads similar to mine I'm posting now, but those problems seem to be different from the problem I'm having.
So everyone says to do the emergency "power on with volume up held down"
But mine never powers off. The Boot loop goes from the boot loop sequence, and if I force it off it goes to "Entering Upload Mode: Cause Unknown". Forcing that off it immediately boots into the boot loop. So I can never shut it off, so I can never enter the emergency "hard reset" mode, because the device never shuts off. Eventually the battery dies, but the hard reset doesn't worth then either.
Does anyone know how to use the upload mode? The link to a samsung driver in the other thread is now a broken link. And once I'm able to write data to the device, where do I get the right set of android hard reset files?
I have no data on the device I need.
I have a very similar situation. Since yesterday my tab got caught in a boot loop. Didn't made any changes, just went into it. And the only way to turn it off is to force it to go to download mode and turn it off down by holding power button from there. I have rooted it a long time ago. I can't get into recovery mode by holding power+up. All I can get it the download mode that first says "waiting for usb cable" and if I connect it to the PC it goes to "press the [START] of Odin3". Do I need to try the fastboot method and reset it to factory details? I've being trying to do that but no devices were listed... Or do I need to reflash something with oding again? Please, just give me a tip.
Does anyone know how to use "upload mode" ?
Clyde_Frog said:
Does anyone know how to use "upload mode" ?
Click to expand...
Click to collapse
what the heck is upload mode?
i know what download mode is but what is upload mode?
can you get into download mode?
pwr + button next to it...hold until a menu pops up.
if you can then just flash a odin rom from there...get it from here or sammobile.com
hi
i have similar situation. i have a boot loop also. i can get into download mode. but then i can't get into odin3 download mode. it's stuck on waiting usb cable.
i just want to flash stock rom. i'v tried flashing a custom rom. but something went wrong and now i have this problem. hope somebody can help me.
If you're using a windows machine reinstall the drivers and see if that helps get past the problem. If you need links I have to get on my PC an copy and paste from there. Keep us updated. I've been there done that I think. So I hope I can help.
Sent from my GT-P7510 using one stinky finger.
Benzoman,
it worked! Tnx! i did what u suggested. i removed the samsung drivers and reinstalled them. now odin recognized my tab.
Glad I could be of help and you fixed the problem
by the way, there is a thanks button you could use.
Sent from my GT-P7510 using one stinky finger.
sorry, my bad! how about now? tnx
No problem. Now you got one to.
Sent from my GT-P7510 using one stinky finger.
Benzoman said:
If you're using a windows machine reinstall the drivers and see if that helps get past the problem.
Click to expand...
Click to collapse
What drivers? I've never installed any drivers of any kind, nor does my manual mention the need for drivers?
What is Odin, and why have I never heard of it? Why can't I find a download link for Odin?
Also, why can't I find any information about Odin?
This is the best I can find, but it appears to not be the maker.... http://www.rootingdroid.com/246/flash-your-samsung-with-odin-download-odin/
The instructions on that page:
" Using your data cable, connect your Android device to your computer. Turn off your mobile device for 30 seconds then power it up by pressing and holding HOME, POWER and VOLUME DOWN buttons until you will be prompted that you have entered in download mode."
I finally got into download mode! I had to connect the USB cable to the device. However, the copy of Odin3 I found is just a giant box with blank text fields. I have no idea what I'm doing with it. It did not auto detect my device, and I have no idea what firmware version I currently am using because I can't get the device to boot.
I tried to Unroot my Galaxy Tab 10.1 LTE last night and think I may have bricked my tablet. I used the instructions here on the XDA forum which had a link to all the Stock ROM's in one place. I got the most recent one and the only one for USA but it said it was for the model 7510. I didn't think that would be a problem since the USB drivers I installed on my PC were also labeled as being for the 7510 and they worked.
This tablet is the SCH-I905. Now I can't get it to boot at all. Gets stuck in a boot loop. Shows the Samsung logo, then resets and does it again. I can't get it in recovery mode either. Goes to a black screen and hangs.
Using the normal process to get to Download mode doesn't work. Holding Power and Volume Up, then letting go of the Power button, then pressing Volume Down and then Up. That's one weird thing. I can get to the option screen that shows the Download and Recovery mode options. Normally I would hit the Volume Down button to select Download mode and on the screen it says to press Volume Up to continue or Volume Down to cancel. If I press Volume Up it goes to a black screen and hangs. If I press Volume Down I get the Odin Download screen that says Waiting on USB cable.
That screen doesn't look the same as what I normally see but I'm not sure what's different. I didn't memorize each line of text. I just know there's not as much text there as there usually is. My PC will not recognize the tablet no matter which USB port I try to use and the tablet doesn't recognize that the USB cable is plugged in. I had no problem with the USB connection before I flashed the 7510 stock ROM.
So, if I cannot get to recovery mode and I can't get Download mode to work so I can use Odin to flash a different rom then is this thing bricked or is there something else I can try? I am about to try using my laptop and its USB ports but I don't think that's going to make any difference.
BTW, I have since found the correct 'stock recovery rom' at droidbasement.com and downloaded it to my PC. I just need to get on the tablet somehow.
Many people have your problem. I have my Lte verizon bricked as yours. The problem is demaged bootloader, only nvflash can fix it but actually our bootloader is locked and we need a hex key called sbk. At least we have to wait that somebody hack our tab from the basement. For now we can only search and share result.
pickupcash said:
I tried to Unroot my Galaxy Tab 10.1 LTE last night and think I may have bricked my tablet. I used the instructions here on the XDA forum which had a link to all the Stock ROM's in one place. I got the most recent one and the only one for USA but it said it was for the model 7510. I didn't think that would be a problem since the USB drivers I installed on my PC were also labeled as being for the 7510 and they worked.
This tablet is the SCH-I905. Now I can't get it to boot at all. Gets stuck in a boot loop. Shows the Samsung logo, then resets and does it again. I can't get it in recovery mode either. Goes to a black screen and hangs.
Using the normal process to get to Download mode doesn't work. Holding Power and Volume Up, then letting go of the Power button, then pressing Volume Down and then Up. That's one weird thing. I can get to the option screen that shows the Download and Recovery mode options. Normally I would hit the Volume Down button to select Download mode and on the screen it says to press Volume Up to continue or Volume Down to cancel. If I press Volume Up it goes to a black screen and hangs. If I press Volume Down I get the Odin Download screen that says Waiting on USB cable.
That screen doesn't look the same as what I normally see but I'm not sure what's different. I didn't memorize each line of text. I just know there's not as much text there as there usually is. My PC will not recognize the tablet no matter which USB port I try to use and the tablet doesn't recognize that the USB cable is plugged in. I had no problem with the USB connection before I flashed the 7510 stock ROM.
So, if I cannot get to recovery mode and I can't get Download mode to work so I can use Odin to flash a different rom then is this thing bricked or is there something else I can try? I am about to try using my laptop and its USB ports but I don't think that's going to make any difference.
BTW, I have since found the correct 'stock recovery rom' at droidbasement.com and downloaded it to my PC. I just need to get on the tablet somehow.
Click to expand...
Click to collapse
Did you solved the issue?
Please share ..., i face the same problem now ...
regards,
erwien.
Did you solved the issue.
share me......i face the same problem now
.
.
.
.
.
.
.
.
.
.
.
.
help me plz
I recently sold my og note to a friend. it was rooted running black star. He has asked me to try and fix it for him because it will not boot up. when he gave it to me it was stuck at the download mode warning screen ("volume up : Continue ; volume down : Cancel (restart phone)") . I was able to get it into recovery . I tried to flash a few different roms i had on the phone when i gave it to him. I was able to flash a rom and get a successful message but then it would not start it would just go back to the warning screen. I then tried to use odin to flash stock rom but it wont go past the warning screen. pressing up or down doesnt do anything. the only thing it will do from there is boot into recovery mode. Does it sound like its bricked or should i try something else? anyhelp would be greatly appreciated.
thanks
matt
Sounds like the volume down button is stuck. When you reboot if you hold volume down with power it takes you to that screen. Pull the battery and see if you can free the button.
Agreed ....the device is not bricked ....g
Or friend deleted OS files and it can't boot. Worst case is you connect to a pc and Odin or Kies flash a new system.
rangercaptain said:
Or friend deleted OS files and it can't boot. Worst case is you connect to a pc and Odin or Kies flash a new system.
Click to expand...
Click to collapse
how is that done
Search my friend ....
There are many threads on the subject ...
Just go slow and read read read ...g