i task29 my hd2 and flashed new radio now phone wont boot or anything i'm lost this is the radio i flashed Leo_radio_2.05.50.11_TMOUS.zip and now nothing cant do anything no usb connection nothing it is a tmob us phone with hardspl 2.08 on it i don't get it?
Rotary Parts said:
i task29 my hd2 and flashed new radio now phone wont boot or anything i'm lost this is the radio i flashed Leo_radio_2.05.50.11_TMOUS.zip and now nothing cant do anything no usb connection nothing it is a tmob us phone with hardspl 2.08 on it i don't get it?
Click to expand...
Click to collapse
Not sure what the problem is.
I use Task29 all the time and have no problems.
I do not have a T-Mobile phone and the radio you listed is for T-Mobile.
What ROM did you have on the HD? Did you flash just the radio after the Task29?
Rotary Parts said:
i task29 my hd2 and flashed new radio now phone wont boot or anything i'm lost this is the radio i flashed Leo_radio_2.05.50.11_TMOUS.zip and now nothing cant do anything no usb connection nothing it is a tmob us phone with hardspl 2.08 on it i don't get it?
Click to expand...
Click to collapse
Sorry if this sounds like a silly question but did you flash a new rom after doing task29?
Task29 completley wipes your phones nand, so everything is gone. Flashing a new radio isnt going to do much good if there is no rom installed on phone either.
no i did not once i flashed radio it went blank and can't do anything no usb connection our anything
this is where the radio came from post 51
http://forum.xda-developers.com/showthread.php?t=611787&page=6
name of radio i flashed
Leo_radio_2.05.50.11_TMOUS.zip
Hope you find a solution, but I am not very hopeful.
If you do, please post it as I would really like to know how you did it.
Rotary Parts said:
no i did not once i flashed radio it went blank and can't do anything no usb connection our anything
this is where the radio came from post 51
http://forum.xda-developers.com/showthread.php?t=611787&page=6
name of radio i flashed
Leo_radio_2.05.50.11_TMOUS.zip
Click to expand...
Click to collapse
This is pretty basic, but you do have to put your phone into bootloader manually after task 29. Take off the back cover, hold down the volume rocker, and hit the red reset button. Continue to hold down the volume until the multi-colored bootloader screen shows up. Then you can connect the USB and flash.
Related
Hey everyone,
i am so upset and lost; words cannot describe it.
So i installed WM6 black shadow and everything was working except for SMS and MMS. So i am like ok i can live with that for a day till custel' rom will come out. SO i decided to upgrade the radio to 1.43 and boom here is where the problem started, No GSM on boot up. Phone doesn't boot up. I tried install 1.40 over again, still nothing. No i tried upgrade the the rom itself, i tired custel 2.5 and nothing and i tried the new Cingular rom, still same problem. the roms flash all the way. I read the wiki, and saw the mtty.exe thing but that doesn't work for me either. I am really lost and don't know what to do.
Specs
cingular 8525
hardspl v7 cid and sim unlocked.
PLEASE HELP
4.13?? 4.10??
Where did you download these radios from??
or do you mean 1.41 or 1.43??
Yeah thats what i meant, 1.40 and 1.43 sorry. You can see how upset i am.
Thanks Again
Well, if your phone turnes on .. it's not a brick.. lol .. it IS fixable... When you turn the phone on does it go RIGHT to the 3 colored screen?
@dan5.5
You need to read the unbricking thread about this, all the info you need is there.
http://forum.xda-developers.com/showthread.php?t=286755
If you are superCID I don't see how flashing a radio could have messed up your phone.. that's weird.
mrvanx said:
@dan5.5
You need to read the unbricking thread about this, all the info you need is there.
http://forum.xda-developers.com/showthread.php?t=286755
Click to expand...
Click to collapse
I read everything there and nothing seems to be working for me. I woudnt post for nothing. i dont want to be annoying.
OK im going to repost what ive said on 4wm:
We need to check if your Radio BL is functional, firstly leave HardSPL v7 on there and connect to the bootloader via mtty (il assume you know how to do this).
Issue the following commands and tell us the results please:
1) checkimage (this shows the CRC checksums of each component...id expect the radio image to show a timeout....
2) info 2 (This will verify that your CID is intact)
3) info 8 (does a bad block check)
Once youve done this, flash SPL 1.10.oli to the device and once again connect up to mtty.
4) 'rtask a' this will enter the radio bootloader you will see "Enter Radio Bootloader" or something to that effect
from now on when you type the text does NOT appear on the mtty screen.
5) 'rversion' this should return your radio bootloader version...now unfortunatly if you see nothing...you radio BL is dead and sorry your device is royally bricked. If you get something returned back onto the screen (most probably containing the text '0108') then your radio BL is fine.
Click to expand...
Click to collapse
do as instructed in that text, post your results here.
I cant falsh spl 1.10 oli. it gives me the 260 error.
the 260 error is not connected via USB right? .. weird... have you tried taking your battery out for a couple minutes, then booting into BL mode? sounds weird but this worked for me when I didnt flash hardSPL firsl..
hey mrvanx's
I can't downgrade the hardspl to 1.10, anyhelp.
I cant active sync, the phone doesnt boot up.
Is there anyway to aviod having to respond on the phone.
hey,
i can get the phone to boot up into windows and then it freezes within a couple min. what should i do. Still no gsm message and no phone. thanks
Dan
OK, so let's try and get you to a working state - I've bricked mine a couple of times and it can be quite heart-stopping, eh?
The first thing I would do is re-download radio 1.43, just incase your current one is damaged somehow.
Secondly, download Black Shadow - I know it's not the ROM you ultimately want but the aim here is to get you working again and we can move forward from there.
First, boot up into BootLoader mode (hold down the OK button on the left side of the phone and the power button and then press the reset button on the bottom, just in case you didn't know
You should come to the three colour screen and it should be reading IPL-1.04 and SPL-2.10.Olipro. If it isn't, stop here and post what it does say.
If it everything is OK at this point, when you plug your phone into your computer, it should change to USB at the bottom. Just wait for the Found New Hardware prompts to clear on your PC and then flash the black rom - choose the hardspl option in the flash program.
Once that has finished and it is at the "tap screen to set up windows..." bit, put it back into bootloader mode as above and flash the radio.
This should hopefully give you a running phone again as I know this combination works OK as I am currently using it.
Fingers crossed, don't panic, and let us know what the results are
Cheers,
Smiffy.
Nothing is working, can some please help me. Is there anyt way i can restore the spl to the original one so i can send the phone back, i just got it like 2 weeks ago. thanks
Also i have a bad block thats what i think makes the phone freeze after i boot it up.
How can i get around this, thats seems to be the biggest problem.
Hey everyone, let me give you more info.
I can fully flash any rom and and radio,
phone will boot up like 1 out of 10 times and then freezes and thats it.
i have a bad block number 6. I have hard spl v7 installed before the phone got screwed up. I cant downgrader the spl to a lower one to check if radio stack is screwed up. Can someone please help me, if you need to ask me more info feel free.
I was instaling NBD_v8.3_8MB trough shelltool on my MDA Vario then something happened and my PC restarted I whink it is because of the electicity .... so now when I restardet my phone it is stuck on the T-mobile screen Where it is writen.....
IPL 2.21.001
SPL 2.21.Olip
GSM 02.19.11
OS 6.6.6.666
Thanks in advance
First of all, its not bricked. Bricked = doesn't turn on, nothing, blank screen.
I've looked to your info, you already have HardSPL, so you can flash directly using any RUU, don't use shelltools!
Enter bootloader (hold camera+reset), open up the RUU of the ROM you want (make sure it doesn't have any IPL/SPL) and flash away
well I looked all day what to do and I can not find solution
I just can not understand how to flash the phone
I found one solution via some kind of Wizard_love, but again I do not know what to do
Please help i am haveing the same thing just did it today i have the Cingular 8125....i have held camera+reset and got into these Red,Green,Blue,white screen and it says IPL 2.25 and SPL 2.25 now when i run the ROMUpdateUtility_Wizard_NoID it does not work i have my usb pluged in and my phone says USB please help
Thank you
PS.
I am running Vista
IPL 2.25
SPL 2.25
GSM 02.25.11
OS.6.6.6.666
_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-
Ok i have try everything. I have tried the RUU from the HTC site and even everything else when it is searching for the PDA and crashes idk why. I turn on my phone holding the camera and i get to the Red,Green,Blue,White...Plug the USB in and the phone says USB but not my computer??? so i don't know what i need to do please HELP i just got the phone and read you can do all this stuff
1. Please use a PC with Windows XP
2. Download your original carrier ROM (i.e. Cinglular stock ROM) and flash back to original WM5
3. Install HardSPL or use SSPL
4. Flash to WM6
starkwong said:
1. Please use a PC with Windows XP
2. Download your original carrier ROM (i.e. Cinglular stock ROM) and flash back to original WM5
3. Install HardSPL or use SSPL
4. Flash to WM6
Click to expand...
Click to collapse
Were can i get HardSPL,SSPLand the flash back up?
all i have is the original rom
You guys wanna see bricked? I have a BRICKED! phone... My MDA was the unfortunate victim of a car accident. When my car went carreening off the road, my MDA went flying through the air and ended up on the floor of the car but not before hitting virtually every surface on the inside of the car.
Now my charge port is completely snapped off and my battery shorted out when I was trying to hold the charge port in place to charge it and fried the main board. DEAD. NO MORE.
THAT MY FRIENDS, IS BRICKED....
No worries though, I already ordered a TyTN II
Cool can you help?
Oh and i had the same problem with my mda and i got it replaced from tmobile. - the easiest way to reapair an MDA is getting it replaced ^^
offtopic
@dharvey4651
Why didn't you buckle up your phone?
Well i got mine up and running agian just used XP and install the RUU from HTC YES.......Now when i go to install WM6 when i press update were it should show me the Ver. of the one i am installing on my phone it does not say why please help and what do i need to install WM6 on my phone?
Just a quick question did you read the other threads there are already. They basicly explain everything clear and good
i have just still stuck on some stuff
dferreira said:
First of all, its not bricked. Bricked = doesn't turn on, nothing, blank screen.
I've looked to your info, you already have HardSPL, so you can flash directly using any RUU, don't use shelltools!
Enter bootloader (hold camera+reset), open up the RUU of the ROM you want (make sure it doesn't have any IPL/SPL) and flash away
Click to expand...
Click to collapse
jukata
first of all,as dferreira has assured u that ur device is not bricked,secondly ,you already have HardSPL,that means your device is unlocked,just follow his instructions,download any wm6 Rom and flash,it'll good to go,but if u still want to be sure,download WST Tool from the below given thread read carefully and apply the tool to verify the status of ur device,
http://forum.xda-developers.com/showthread.php?t=329170
u can flash NBD rom which u have or any other wm6 rom,goodluck
NVM i am on the Other Page! Thanks
Ok, i have read everywhere and can't help myself, so if someone would be kind enough to help it would be much appreciated
Ok, Used SoftSPL and tried flashing the ROM. It manages to get to 99% and then just goes RED. I have tried 3 different ROMS and same story it goes RED at 99%.
When i remove the battery, it goes to the RUU Red, Green and Blue screen. SPL version is 2.16.0001. Not Oli's new one.
What do i do from now?
kastro said:
Ok, i have read everywhere and can't help myself, so if someone would be kind enough to help it would be much appreciated
Ok, Used SoftSPL and tried flashing the ROM. It manages to get to 99% and then just goes RED. I have tried 3 different ROMS and same story it goes RED at 99%.
When i remove the battery, it goes to the RUU Red, Green and Blue screen. SPL version is 2.16.0001. Not Oli's new one.
What do i do from now?
Click to expand...
Click to collapse
Soft SPL only allows you ONE update, so phone is CID unlocked only when Soft SPL is loaded.
It's normal for the RUU to stick on 99 % for a couple of minutes, The whole update will take aprox 10 minutes.
You can try the hard SPL from there you are semi-permanently CID unlocked.
Good luck,
EquinoXe
Hey i'm tryin to flash this radio since its an att radio, however, it seems different than other radios (it includes more files with it)...
anyways, when i try to flash it, it takes me to the triclor screen, and then nothing ever happens....ive flashed nearly all other radios, and had no problems
i have hardspl 2.10.Olipro, but when this radio takes my phone into the tricolor screen, the spl doesnt say 2.10.Olipro...
a soft reset takes everything back to normal
thanks
lupes5 said:
i have hardspl 2.10.Olipro, but when this radio takes my phone into the tricolor screen, the spl doesnt say 2.10.Olipro...
Click to expand...
Click to collapse
did the tricolor screen say something like spl 1.09-des?
yes if i recall correctly (sorry not at home to double check), but im pretty sure thats what it said
I have a htc 6800, last night i flashed a new radio 3.35.04 and a custom kitchen rom with windows 6.1 everything seemed to go ok with the flashing but now when i turn the phone on just before it gets to the home screen it reboots on its own, and it keeps doing it. last night i could use the phone for 2-3 minutes before it rebooted on its own. and now it dosent even get to the home screen what did i do wrong?
adriancox said:
I have a htc 6800, last night i flashed a new radio 3.35.04 and a custom kitchen rom with windows 6.1 everything seemed to go ok with the flashing but now when i turn the phone on just before it gets to the home screen it reboots on its own, and it keeps doing it. last night i could use the phone for 2-3 minutes before it rebooted on its own. and now it dosent even get to the home screen what did i do wrong?
Click to expand...
Click to collapse
Did you un-lock the phone prior to flashing.....what hardspl is showing now?
adriancox said:
I have a htc 6800, last night i flashed a new radio 3.35.04 and a custom kitchen rom with windows 6.1 everything seemed to go ok with the flashing but now when i turn the phone on just before it gets to the home screen it reboots on its own, and it keeps doing it. last night i could use the phone for 2-3 minutes before it rebooted on its own. and now it dosent even get to the home screen what did i do wrong?
Click to expand...
Click to collapse
This has happened to a few people. Do a Hard Reset. If that doesn't help. Then reflash the Bootloader with Hard_SPL 2.40 and reflash the radio and rom.
You must flash 3 things which must be compatible versions of each other in order for your phone to work:
Bootloader (aka SPL's)
Radio
ROM
You only mentioned the Radio and ROM, with no mention of a bootloader. You also don't mention which custom ROM you flashed.
See this thread for a list of compatible Bootlaoders / Radios / ROMs:
http://forum.xda-developers.com/showthread.php?t=392133
Assuming you flashed a DCD v3 custom ROM the bootloader you need is called
SPL 2.47 (2.47No2Chem Titan SPL EVT) (Recommended) or
SPL 2.40 (Hard-SPL 2.40-olipro)
You can find both on this forum.
Make sure you do lots of reading at this blog:
http://wiki.xda-developers.com/index.php?pagename=HTC_Titan
I seen your post over at PPCGeeks.....I posted this there for you....
Wrong hardspl......flash back to a stock pre-gps rom and then un-lock with either 2.4Olipro or 2.47 in my sig....flash radio and then flash custom rom....also I would suggest reading the tutorial in my sig....or use the Wiki here both are helpful...
thanks for your help. i will retry. if my device keeps rebooting how can i change the bootloader? my bootloader is spl 1.20.01 olipro
adriancox said:
thanks for your help. i will retry. if my device keeps rebooting how can i change the bootloader? my bootloader is spl 1.20.01 olipro
Click to expand...
Click to collapse
Enter BL and it should stop......hold simultaneously power, camera, and soft reset hole....tri-color screen will show....(hence BL) then flash pre-gps stock.....you can also try hooking it up to the computer and it will stop the reboot....I have never tried the latter so I cannot confirm...
thanks guys it worked. everything works except syncing my device and everytime i push the "settings" button to access the settings the device freezes up.
adriancox said:
thanks guys it worked. everything works except syncing my device and everytime i push the "settings" button to access the settings the device freezes up.
Click to expand...
Click to collapse
I posted a fix for the settings issue over at PPCgeeks for ya......take a look...
hello,
i have an htc titan bought few months ago. i'm happy because it was unlocked and use a custom rom.
on the last 2 weeks i've noticed a very bad reception on gsm and therefore decided today to change the rom and radio. but no luck at all!
can enter on spl (it shows me hspl 2.5, radio 1750), but from here i can't do anything.
tried also pressing vol- and power, but after few seconds enter on a black screen with a computer, a phone with a cable and an arrow showing to
enter the cable in computer; nothing happens here also.
how can i change the rom and why the phone looks like that?
nobody?????
You have Radio 1750 and what rom you trying?
i have 1750 radio and i'm trying dynamics 2.2 both 2.05 and 4.06, western and eastern.
klinutzu said:
i have 1750 radio and i'm trying dynamics 2.2 both 2.05 and 4.06, western and eastern.
Click to expand...
Click to collapse
In case of radio 17 you should only try 4.06. Or downgrade the radio to 16 to try 2.05. Otherwise you get non-bootable device.
klinutzu said:
can enter on spl (it shows me hspl 2.5, radio 1750), but from here i can't do anything.
Click to expand...
Click to collapse
Enter HSPL screen, connect USB cable. When you see USB in the bottom of a screen - start TitanAdvancedRUU.exe
(before that - put TitanAdvancedRUU.exe and 4.06 rom file in one folder on your PC)
... can't install qualcomm driver...
l.e.: finally succeeded
somebody told me that if worst reception to install 2.05
klinutzu said:
somebody told me that if worst reception to install 2.05
Click to expand...
Click to collapse
Depends upon your carrier. Both Titan radios work $hitty. You should try both to realize which one is less crappy for you.
found what's happen: they are some small contacts on the mainboard thata don't touch well the back cover and therefore the phone seems to work without antenna...