Rooted 2.1 ATT x10 mms/email issue - XPERIA X10 Q&A, Help & Troubleshooting

Since debranding, rooting, and putting 2.1 on an x10, my fiance can no longer recieve an mms from me (tmobile android). It says message not compatible. She further has issues with yahoo email attachments. They show up as .dat files and no attachments where on my device they work fine. I used a generic 2.1 firmware. I would appreciate any help or direction on this.
Thanks

k so ive had this problem many times....
go to settings/wireless & networks/mobile networks/access point names and press the menu button(right button on bottom of x10) and tap new apn and enter the following where needed..
k so wont let me post it but google (at&t apn settings android xperia x10) and its the first one on from android forums
hope this help..

skryte said:
k so ive had this problem many times....
go to settings/wireless & networks/mobile networks/access point names and press the menu button(right button on bottom of x10) and tap new apn and enter the following where needed..
k so wont let me post it but google (at&t apn settings android xperia x10) and its the first one on from android forums
hope this help..
Click to expand...
Click to collapse
I tried your, and it did not work. I found this and verified that this is exactly what is on the phone and on am mms sent from me still she gets
" Your phone is not compatible with this message type or size. Portions of this mesage will not be displayed"
So ikn wtf is wrong now....
this are the APNs settings for se x10 (internet and mms)
------------------Number1-----------------------------
Name
MEdia Net
APN
wap.cingular
Proxy
wirelees.cingular.com
Port
80
Username
[email protected]
Password
CINGULAR1
Server
<Not set>
MMSC
<Not set>
MMS proxy
<Not set>
MMS port
<Not set>
MCC
310
MNC
410
Authentification type
None
APN type
defaul.supl
-------------------------Number 2------------------------------------
Name
MEdia Net MMS
APN
wap.cingular
Proxy
<Not set>
Port
<Not set>
Username
[email protected]
Password
CINGULAR1
Server
<Not set>
MMSC
http//mmsc.cingular.com
MMS proxy
wireless.cingular.com
MMS port
80
MCC
310
MNC
410
Authentification type
None
APN type
mms

yea that is confusing thats a new one for me but i will look into it and see what i can find

what version of 2.1 exactly does she have on the phone and which baseband

skryte said:
what version of 2.1 exactly does she have on the phone and which baseband
Click to expand...
Click to collapse
I used the generic 2.1 since there is no USA version out yet.
Edit: after hours of banging my head it turns out ATT has the worst mms size limit of 600k. T-mobile and others are at 1 mb. That was the mms issue.

Related

Someone post instructions for apps2sd for the hero please? I can't figure it out.

I know, everyone wants to tell me to search for it. But honestly, have you tried to "search" for it? When I go looking, I find everything but a decisive answer on how to do what I would like. SO if you'll bear with this LONG email. You'd not only be helping me, but others possibly.
Here's what I've got (I'm not all sure what you need from me so there's extra info from other screens on here - exception is I'm not posting my IMEI number)
The ROM on the phone is the new manufacturers ROM update that was made available 9/11/2009.
HTC Hero (the actual phone, not just the ROM)
Firmware: v1.5
Kernel version: 2.6.27-8dd6dee
Build number: 2.73.405.5 146733
Software version: 1.0.0.A6288
HERO CVT SHIP S-ON
HBoot 1.76.007 (HERO10000)
MicroP-010f
Touch Panel-syn0104
RADIO-6.35.06.18
I've "rooted" my phone (using "Recovery-RA-HERO-v1.2.2.img" and "flashrec-20090815.apk" - as I got told I couldn't install "flashrec-1.1.2-20090909.apk" by the phone when I tried to install it), and also used the SDK adb to push and allow permissons for su and superuser.apk.
The instructions (and videos) on theunlockr.com seemed to help me with that, and I'm a total NOOB. As now that's where I'm at. Not much further.
So what I'm looking for is how to get my apps to run of my MicroSDCard in the phone?
I've tried apps2sd and apps2sd 2 and everytimg I load apps2sd 2 it tells me that my partition on the card isn't corrent and asks me if I want to have it do it for me. Well, to continue I have to choose "Yes" and set sizes... it says "DONE" and I click on reboot now.. Nothing happens. I've left it sit on that screen for up to two hours... nothing happens. I have to hard reset my phone to get back to HOME.
OK I've seen instructions on using Paragon Partition Magic to partition my memory card. I've done that (can do that again - 4G card - 3GB fat32, 900MB Ext2, 100MB Swap - nothing seems to get recognized no matter how I grow or shrink these as apps2sd 2 still tells me it's invalid and wants to repartion now the "remaining 3GB of Fat32 space")
Why don't I try a custom ROM? Well when I did that... my SMS quick working all together. Since that's a "pretty nice feature" to have... I stepped back and went to the manufacturers ROM update that was just released. It seemed I got all the "speed" of the recent Madacco ROM and my SMS worked.
Now that 123MB space reserved for applications on a "raw" manufacuters build phone. Ya... not enough. I want to run and store my apps on my SD Card, I load a lot of games and other stuff, so by the time I'm done I've only got maybe 5MB of the 123MB left - at that point the web and everything slows WAY down.
I need some instructions on how to do this (run apps from SD Card rather than from phone) based on the configuration I currently have (or based on a ROM out there specifically for the HERO that will allow all my other features to work as well as run apps off of the SD card). The last custom rom I tried of Modacco's disabled my SMS functionality.
Not that I think it matters. I'm in the USA, running the HERO on a SMS network (CellOne or CellularOne - aka: chinookwireless.net).
Also, if anyone out there knows how to get MMS working on CellOne (cellonenation.net) on this phone... (I LOVE YOU! and would pay a small amount of $ ($20) even to you if your info "works" via paypal - I'm an honest fellow... trust me you'd get the money).
I've tried to fanagle the settings on http://www.cellonenation.com/support/ they have a link near the bottom of the page "What if you have a smart phone? (CLICK HERE)" (multiple HTC phones, none are andriod). But with no success.
Sorry for the long posts... People hate reading them... I just want some simple help... without getting slapped down for not being able to find all the info I need from "searching" the forums. Pppppplease (says roger rabbit)
Current APN Settings on the HERO HTC that I've got working Phone, Internet and SMS are:
Name: internet.chinookwireless
APN: internet.chinookwiress.com
Proxy: <not set>
Port: <not set>
Username: <not set>
Password: <not set>
Server: wapgw.chinookwireless.net
MMSC: http://mms.cellonenation.net/mms/
MMS Proxy: 204.181.155.195
MMS Port:8080
MMS Protocol:Wap 2.0
MCC: 310
MNC: 570
APN Type: <not set>
None of those MMS settings seem to matter (still nothing works). I've contacted my provider. MMS is turned on and part of my calling plan. Note: CellOne doesn't sell this phone, I ordered it from Buy.COM vendor in the US it is factory unlocked. Help?
One final thing to request... The internet on CellOne is either REALLY, REALLY slow (up to 30 seconds just to load google.com (mobile version)) or there must be a better radio driver out there? How to on that would be grand as well.
http://android.modaco.com/content/htc-hero-hero-modaco-com/293461/how-to-partition-sdcard/

Bell Network and Telstra SBF. (How to get Data Working)

Flashing this I've come across this problem with the "no internet service." or "Failed to connect to internet."
Simple steps to fix this:
Go to:
Settings>Wireless & Network Settings>Network Settings>Access Point Names.
Now input the following.
Name: Bell
APN: pda.bell.ca
Proxy: web.wireless.bell.ca
Port: 80
Username <Not set>
Password <Not set>
Server <Not set>
MMSC: http://ms.bell.ca/mms/wapenc
MMS proxy: web.wireless.bell.ca
MSS port: 80
MCC: 302
MNC: 610
Authentication type <Not set>
APN type <Not set>
AGAIN, I live in Ontario (Toronto Area) This got my Bell data for internet to work with the Telstra SBF.
Don't know how its the same all around Canada.
If it's Bell it'll work. If it's another carrier the settingd are slightly different. Just google "your carrier's name+apn settings". Ex. ROGERS+APN SETTINGS, and there you go.
Its always nice to post this information here.
Not saying its hard to find. Just giving a helping hand to a fellow Bell users.
This never works for me. is there anything you have to do after putting in these settings?
like restart the phone maybe?
Hi, I don't know if this is information everyone knows, but I download APN Backup & Restore from the market. I backup the APN's I currently have, copy it to my pc (incase the SD card gets erased), then once i flash my new sbf I download APN backup and Restore again and restore my old APN list. It worked with my hero so I figured it would work here and it did.
If this is information everyone already has please ignore it, but I hope it helps.
Ratchet556 said:
This never works for me. is there anything you have to do after putting in these settings?
like restart the phone maybe?
Click to expand...
Click to collapse
When you entered everything, you press the menu key, you save the settings, then you punch the back key and you select the new APN you just entered

HTC Touch Pro 2 radio not working

Hi,
I just updated my wm 6.5 to android Gingerbread 2.3.7, but I have no internet 3G signal, what could be the problem?
On the same note:
1) How do I update the profile? I do not see an option anywhere in the settings.
2) How do you load a radio rom - I'm guessing this is something that is causing my internet issue.
Thank you, any help would be appreciated!
kam1967 said:
Hi,
I just updated my wm 6.5 to android Gingerbread 2.3.7, but I have no internet 3G signal, what could be the problem?
On the same note:
1) How do I update the profile? I do not see an option anywhere in the settings.
2) How do you load a radio rom - I'm guessing this is something that is causing my internet issue.
Thank you, any help would be appreciated!
Click to expand...
Click to collapse
if you didnt flash a different radio version to your phone, then your radio is working just fine. the problem is that the custom rom that you flashed to your device isnt configured with your carriers 'apn' settings. its been a while since i played with the gingerbread settings but iirc it should be under your settings>wireless & networks>mobile networks>and you should see something that says apn or access point names or simmilar. click that and you will need to enter the settings for your carrier. tmobile or att is likely what youre on. if not you can google the settings for the apn for your specific carrier.
Name: AT&T
APN: wap.cingular
Proxy:
Port:
Username: [email protected]
Password: cingular1
Server:
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC: 310
MNC: 410
Authentication type:
APN Type:
Name: T-Mobile US
APN: epc.tmobile.com
Proxy: 216.165.155.050
Port: 8080
Username:
Password:
Server:
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS Proxy: 216.165.155.050
MMS Port: 8080
MCC: 310
MNC: 260
Authentication type:
APN Type:
Hi Haxin,
Thank you for your response. I am with Sprint. I just checked with Sprint, and they informed me that they do not use APN setting (all are left blank). Anyone else knows how I can just flash the radio for the htc touch pro2 android GB2.3.7? Not sure if operating system makes a differerence what you can update on the radio ROM. Also, I'm curious why the PRL update isn't included in the Android settings? Thanks!

MetroPCS AOSP 4.2.2 MMS Files

NOTES/DISCLAIMER
This will not flash you to metro. If you need help with this message me or find me on irc. I can help you but XDA frowns upon it DON'T ASK HERE. I am not at all responsible if you die, get struck by lightning, etc.
This guide assumes you already have text/call/data working on your Evo 3D
Ok, i've been looking around for a way to get mms working on an aosp 4.2.2 rom for a long time now. I finally got it working and decided to share my info. Just to be clear i didn't develop anything here, i used the 4.2.2 cyanogenmod device profile for d2mtr on metro. Your'e gonna need to download http://www.mediafire.com/?t2nvso7yaqeixgk
GUIDE
1. Open voice dialer.
2. Say this exact phrase "OPEN APNS"
3. input these settings:
Code:
Name: metropcs
APN: internet
Proxy: Do not modify
Port: Do not modify
Username: Do not modify
Password: Do not modify
Server: Do not modify
MMSC: http://mms.metropcs.net:3128/mmsc
MMS proxy: wap.metropcs.net
MMS port: 3128
MCC: Do not modify
MNC: Do not modify
Authentication type: Do not modify
APN type: mms
APN protocol: Do not modify
APN roaming protocol: Do not modify
Bearer: Do not modify
4. Copy PressY4Pie-MMS-FIX.zip to Sdcard
5. Reboot into recovery.
6. Flash it
7. reboot,test,profit
If you need help come find me on irc. i hang out on freenode.irc.com in #OUDHitsquad. while your there thank Shabbypenguin as most of the help came from his device profile for d2mtr. Also its a good idea to clear cache and dalvik. and as always keep a backup
Thank you!!! I've been on ICS for MMS the longest waiting for someone to post 4.2.2 Metro MMS fix. About to switch over!
Sent from my PG86100 using xda app-developers app
trev23sks said:
Thank you!!! I've been on ICS for MMS the longest waiting for someone to post 4.2.2 Metro MMS fix. About to switch over!
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
hey no problem. let me know how it goes
No good when I flashed the zip it wouldnt even boot up the animation screen I had to reset data
Sent from my Evo 3D CDMA using xda app-developers app
trev23sks said:
No good when I flashed the zip it wouldnt even boot up the animation screen I had to reset data
Sent from my Evo 3D CDMA using xda app-developers app
Click to expand...
Click to collapse
hm thats weird. must be that build prop thing hold on.
EDIT:
try this. You'll have to do the build.prop edits yourself. look at mpcs.sh in the zip if you dont know metro's stuff.
http://www.mediafire.com/?q448hx5s8zyy87f
you'll need to replace
Code:
ro.product.brand = sprint
with
Code:
ro.product.brand.*/ro.product.brand = metropcs
and change
Code:
ro.cdma.home.operator.numeric = 310120
to
Code:
ro.cdma.home.operator.numeric = 310027
and finally:
Code:
ro.cdma.home.operator.alpha = Sprint
to
Code:
ro.cdma.home.operator.alpha = MetroPCS

[APP] ProxyDroid Setup Help

Hi, I wonder if anyone can help me setup proxydroid on my Samsung S3 (i9300), it's running Android 4.3 and is rooted.
The proxy I am trying to connect to is Host='bp1bakpa001.bp.com' Port='80' and I have a user name and password as well.
I have tried setting it up with the following settings in proxydroid: -
Host: bp1bakpa001.bp.com
Port: 80
Proxy Type: HTTP (Also tried HTTPS)
Enable Authentication TICKED
User: My username
Password: My password
Global Proxy: TICKED
Everything else is as default when installed. I know my phone can get the internet through this proxy as I have had it working with Sandroproxy but it doesn't work all the time and I'm told proxydroid is better. For Sandroproxy I had to put 'localhost' and '8008' in the phones wifi settings (wifi>connected network>Modify network config).Do I need to do something similar for proxydroid?
Any ideas where I'm going wrong?
Any help would be much appreciated.
Did you ever resolve your issue?

Categories

Resources