hey guys im really desprate i dont know what to do anymore !
i need help im doing a system repair because i had installed busybox and deleted it via root explorer in my system files
then my root broke my wifi also so im trying to do a system repair but when i click repair everything goes fine until connecting into flash mode i see the green led it proceed to the next step and then after a few seconds it says no newer software available try again later what can i do
thanks for taking the time to take a look !
Alright, I'll try helping out.
1st. xRecovery
Install xRecovery then do a full wipe of your phone... Dont forget to backup just in case.
2nd. FlashTool
Use FlashTool Through your computer and flash the official firmware.
3rd. Master reset.
FlashTool 0.2.6 - "http://forum.xda-developers.com/showthread.php?t=920746"
Decrypted Official ROMs - "http://forum.xda-developers.com/showthread.php?t=683793"
xRecovery - "http://forum.xda-developers.com/showthread.php?t=859571"
See if any of these methods work...
result :
my phone root is broken so it says successfully instaled xrecovery via the flashtool but i cant boot onto xrecovery it just do a normal startup
shahkam said:
result :
my phone root is broken so it says successfully instaled xrecovery via the flashtool but i cant boot onto xrecovery it just do a normal startup
Click to expand...
Click to collapse
Use PC Companion to repair your phone, then root, install busybox & xrecovery via flashtool.
Tehouster said:
Use PC Companion to repair your phone, then root, install busybox & xrecovery via flashtool.
Click to expand...
Click to collapse
that and If u want, do a manual installtion of xRecovery. lemme hit this up:
1st. make sure buzybox is installed, just in case, dl the installer from the market and run it.
2nd. dl xRecovery 0.3 and extract it. (preferebly on computer)
3rd. go into /res/raw/ and you'll find 3 files, copy and paste it into /system/bin/
then xRecovery should be back.
(i kinda do this often cause the auto install of xRecovery usually fails on my phone)
Related
So i've tried different ways of doing it...
- rooted using "All in one solution by Mikevhl"
- download and installed xRecovery 0.3
- rebooted and spam BACK when SE letter comes up, nothing happened.
- Reset back to factory
- rooted the same way
- download BusyBox from Market, installed ans symlink the latest 1.19 BusyBox
- installed xRecovery 0.3
- rebooted, again, spamming BACK and nothing happen
I've tried having the USB cable plugged in, and unplugged. Both way give me the same thing... What else am i missing? UGH...
let me share what i did
after rooting... i downloaded the xrecovery rar file from here
then i downloaded Titanium backup from the market. Once installed i clicked "Problems?" on that app and it downloaded busybox
after busybox installed i then unpacked the xrecovery on my pc. it contains three files (chargemon busybox and xrecovery.zip)
i copied those three to my SD card.
On my phone i opened root explorer, opened sd card and selected those three files then clicked MOVE
set root explorer to mount R/W then go to system/bin and paste the three files there.
reboot and keep pressing the back key once the SE white logo apprears. VIOLA!
"spamming" the back button didnt work for me. you have to press it once every second.
codenamezero said:
So i've tried different ways of doing it...
- rooted using "All in one solution by Mikevhl"
- download and installed xRecovery 0.3
- rebooted and spam BACK when SE letter comes up, nothing happened.
- Reset back to factory
- rooted the same way
- download BusyBox from Market, installed ans symlink the latest 1.19 BusyBox
- installed xRecovery 0.3
- rebooted, again, spamming BACK and nothing happen
I've tried having the USB cable plugged in, and unplugged. Both way give me the same thing... What else am i missing? UGH...
Click to expand...
Click to collapse
Dude try to install busy-box from Titanium Backup..And then use the files which i uploaded below and use them instead of files u got from the xRecovery thread....Do the steps as same as written on thread,but use my file...You'll see it soon!!!!
Hi you can use the flash tool for x10 mini, first root and it will automatically restart, then press ask for permissions, the the xrecovery button becomes avaible and finally press it . Just dont press the optimize button coz it's intended to jit the big xperia with v2 jit, if you press it your device will be stuck in an infinite loop and never get out of that without removing the battery cable inside your phone
PaulitoX77 said:
let me share what i did
set root explorer to mount R/W then go to system/bin and paste the three files there.
reboot and keep pressing the back key once the SE white logo apprears. VIOLA!
Click to expand...
Click to collapse
I will try it tonight, but also faced another problem, after i re-mount it with RW, if i reboot, everything goes back to RO. I try to locate the equivalent of /etc/fstab in the android but i couldn't find it.
Does your phone's file-system permission stick after reboot?
Are you guys all using the 0.1 beta or the latest 0.3 releases?
Beware of the market busybox, I updated mine to .19 and it caused major problems.
I was using MiniCM, installed the market busybox and the phone looped. Also, when I was using Srom, I uninstalled some system apps (the usual stuff I don't use) and the phone rebooted and I lost my root... which meant that I couldn't get into recovery.
So maybe try pratyush_gamer's idea, should work, his knowledge has helped me!!
Still no go, tried titanium backup's busybox, tried to manually copy and paste those 3 files, tried to delete those 3 files and reinstall the xRecovery package...
I'm running 2.1.1.A.0.6 and Kernel 2.6.29 SEMCHost#1
Should i downgrade or something?
Did you upgrade using the below method? I'd and it worked for me.
http://forum.xda-developers.com/showthread.php?t=947290
I didn't do the manual recovery thing, I downloaded Bin4ry's flash tool
http://forum.xda-developers.com/showthread.php?t=826455
It does everything for you root, flashing, JIT, recovery and remove system apps. Suggest you check it out.
These are the methods I used, let me know if it works
Oh and don't worry about the optimize button, it works fine on the mini. If you download the X10 version it might loop after JIT but theres a mini version too.
christophermaisch said:
Did you upgrade using the below method? I'd and it worked for me.
http://forum.xda-developers.com/showthread.php?t=947290
I didn't do the manual recovery thing, I downloaded Bin4ry's flash tool
Click to expand...
Click to collapse
I download the flashtool before, and the firmware, but when i select Flash, it never let me select the Sony Ericsson X10i_2.1.A.435_GLOBAL-GGL GENERIC 1232-9897.zip nor the extracted ftf file...
What I did is replace my build.prop (the one sitting in /system) with the one pedrocel85 provided, rebooted, connected my phone to SEUS and did the upgrade the normal way through SEUS and then did the JIT, recovery etc. modding afterwards with flasher. So I haven't used the "flashing" capability of the tool and can't tell you much about the firmware side.
Check your basebrand: M76XX-TSNCJOLYM-53404015, maybe that could be the problem.
Do you have SEUS installed on your PC? If not, get it off of the SE website try replace the build.prop, reboot and follow the SEUS steps.
http://www.sonyericsson.com/cws/sup...eserviceapplication/xperiax10mini?cc=gb&lc=en
You will end up with the exact firmware that I have.
Good luck
Same issue here
I have the fresh newest firmware from SE. The 3 Xrecovery files are installed in the bin folder.
I did follow all the steps and can't get the recovery mode.
I've tried for hours different ways. It just does not work. I gave up. If there is a new release I will try.
koa
christophermaisch said:
What I did is replace my build.prop (the one sitting in /system) with the one pedrocel85 provided, rebooted, connected my phone to SEUS and did the upgrade the normal way through SEUS and then did the JIT, recovery etc. modding afterwards with flasher. So I haven't used the "flashing" capability of the tool and can't tell you much about the firmware side.
Check your basebrand: M76XX-TSNCJOLYM-53404015, maybe that could be the problem.
Do you have SEUS installed on your PC? If not, get it off of the SE website try replace the build.prop, reboot and follow the SEUS steps.
http://www.sonyericsson.com/cws/sup...eserviceapplication/xperiax10mini?cc=gb&lc=en
You will end up with the exact firmware that I have.
Good luck
Click to expand...
Click to collapse
It said "No new software is available for your phone"... I already have the latest firmware.
OK. I've re-format my SD card, reset to factory setting AGAIN. (however, is weird, the build.prop that i put in earlier is still there)
So i downloaded:
- xRecovery 1.0 beta (i read that the 2.0 and 3.0 doesn't work
- install busybox 1.15.2
- install RootExplorer and copied the xRecovery files to system/bin
- chmod 777 all the files
Reboot nothing happen...
- copy paste the xRecovery files into system/xbin (desperately trying to get this **** to work)
Reboot... nothing happen. i was spamming the back button the whole time. I've seen some youtube video, people spam it and the xRecovery menu come up within like half a second after the SE logo come out...
This thing won't go into the xRecovery at all. I'm completely out of idea... If anyone else have any other new tricks, please let me know.
Fixed. Went to redownload another FlasherTool, using the non-beta v2.8.0
- Hit Root, Reboot
- Hit Ask Root Perms
- Optimize (maybe this is optional, but i was trying it out and hit it)
- Hit xRecovery
- Advanced -> xRecovery -> Reboot into xRecovery.
Awesome, thought the flasher would work!
Enjoy!!
koalaii said:
Same issue here
I have the fresh newest firmware from SE. The 3 Xrecovery files are installed in the bin folder.
I did follow all the steps and can't get the recovery mode.
I've tried for hours different ways. It just does not work. I gave up. If there is a new release I will try.
koa
Click to expand...
Click to collapse
Try Bin4ry's flasher tool
It works
It works, Xrecovery is now installed.
The steps I have followed :
- First, I installed the latest firmware from SE : Latest 2.1.1.A.0.6 SE firmware because I just got a new Xperia Mini I'm upgrading to MiniCM6.
- I have downloaded the 3 files given by pratyush_gamer in this post (post No4)
- Upload these 3 files in the SD card
- Using rootexplorerthe 3 files were copy/paste in the system/bin
- Restart the phone while pressing the "back" button.
Many thanks for your help
koa
is there a way to flash xrecovery through flash tool, ive really screwed up my x10 and xrecovery wont install the normal way, but flash tool is working fine for!
Erm ... yes.
Make sure that you have install unknown apps and usb debugging turned on.
Run flashtool.
Plug in your phone.
Ask for root permissions (assuming you have rooted your phone, if not click on root)
Then click on xrecovery.
That does it for me. Or if you have really screwed your phone and want to recovery a previous back up and that won't work just flash a stock firmware in flashtool, then root, then add xrecovery.
Hope this helps.
cheers for the help;-)
Hey everybody,
I think I crashed my Phone. It reboots everytime I want to start it.
It starts till the SE logo.
That happend after I copied tun.ko files into system folder, installed busybox and cisco any connect.
So I tried to enter system folder via adb to get it fixed. But it failed.
So my question.
Is there any possibility to fix my phone without loosing user and app data or to copy the rom?
floßboot said:
Hey everybody,
I think I crashed my Phone. It reboots everytime I want to start it.
It starts till the SE logo.
That happend after I copied tun.ko files into system folder, installed busybox and cisco any connect.
So I tried to enter system folder via adb to get it fixed. But it failed.
So my question.
Is there any possibility to fix my phone without loosing user and app data or to copy the rom?
Click to expand...
Click to collapse
Try reflashhing ROM with recovery..do not clear dalvik or reset factory reset options in recovery..
Gintonic.SE + zombie-pack kernel by slade ..
And how do I get into recovery?
if you have the recovery instaled press the back button and release several times once you see the sony ericson logo.
if you dint install the recovery i'm sorry but i dont know what you can do. hope some one can help then
Simple and short.
No.
Oh, that doesn´t sound good.
I have a general question. What is a Trim Area?
Try updating your firmware with se PC companion and rooting you phone again ...
floßboot said:
And how do I get into recovery?
Click to expand...
Click to collapse
use X10 flash tool to flash your ROM to a stock one, then use flash tool to root and install xrecovery
download a stock kernel for now (its in .ftf format)
But then I will loose my data, right?
Yes in any update you will loose your data unless you have backed up your data.......
kashem58 said:
use X10 flash tool to flash your ROM to a stock one, then use flash tool to root and install xrecovery
download a stock kernel for now (its in .ftf format)
Click to expand...
Click to collapse
where could i get "x10 flash tool", "xrecovery" and a stock kernel from?
Edit: Sorry, found a place
http://forum.xda-developers.com/showpost.php?p=16474966&postcount=3
hi..
i put a custom rom: free xperia via xrecovery... now on reboot i cant get into recovery mode... tried flashing again...but after flashing and on clicking "ask root permission" in flashtool..it shows error: grant superuser access
which means i cant get into the next step of installing x recovery...
(tried downloading from market busybox ..but it says no root access...)
what am i supposed to do..
this rom is very bad... loses network acess very frequently
Repair it via PC companion,get stock 2.3.3 and if u wonna root it again u can find HOW TO on this thread:
http://forum.xda-developers.com/showthread.php?t=928343
neoxx3m said:
Repair it via PC companion,get stock 2.3.3 and if u wonna root it again u can find HOW TO on this thread:
http://forum.xda-developers.com/showthread.php?t=928343
Click to expand...
Click to collapse
thanx for the reply..
i tried pc companion but it doesnt download the files..
says to check internet connection..
and i checkd it...nothings wrong with it..
any other way to download the os manually and putting it into pc companion folder or smoewhere else?/??..
or is there any other way/ software that can do this?
try this
http://forum.xda-developers.com/showthread.php?t=936733
Download global generic firmware In flasgtool thread and use flashtool to flash it to ur phone. Re-root then install xrecovery with ftool
Sent from my X10i using XDA App
farzaanqk said:
hi..
i put a custom rom: free xperia via xrecovery... now on reboot i cant get into recovery mode... tried flashing again...but after flashing and on clicking "ask root permission" in flashtool..it shows error: grant superuser access
which means i cant get into the next step of installing x recovery...
(tried downloading from market busybox ..but it says no root access...)
what am i supposed to do..
this rom is very bad... loses network acess very frequently
Click to expand...
Click to collapse
try to install xRecovery via flashtool while phone is on or manually copy the files from xRecovery.apk to Your system
HellO I need help ... I am having neov with unlocked bootloader, rooted , and CWM installed
ON my neov Yesterday I tried installing Night-elf kernel experimental lite v9.6 through flashtool and i failed ..although the process was successful ..whenever i turned on my phone ..the sony ericsson logo flashed and nothing happened . Then i used flastool to get back to my stock android ICS ver 4.1.B.0.431. Now my problems are :
1. MY phone doesnt go in to the recovery when i press the volume down button when the sony logo appears
2. My phone doesnt recognize itself as rooted ..but i can go to the root directory when i use ES file explorer.
3. I Repaired my phone using PC companion but still the same problem.
4. I tried to root my phone again using doomlords method but it failed and without it i cannot install CWM
1. with CWM installed,i press back button to go recovery.Night elf kernel have built-in CWM installed.
2. you have to root your phone.My ES file explorer didnt go to root directory even my phone rooted,it always show SD card content.
3. Dont understand what you repair for
4. Make sure you have the right file for install CWM.there is for GB and ICS...
megatpanji said:
1. with CWM installed,i press back button to go recovery.Night elf kernel have built-in CWM installed.
2. you have to root your phone.My ES file explorer didnt go to root directory even my phone rooted,it always show SD card content.
3. Dont understand what you repair for
4. Make sure you have the right file for install CWM.there is for GB and ICS...
Click to expand...
Click to collapse
I went back to my stock rom so that means i hv a stock kernel ..and in stock kernel u hv to press the volume down button to go into recovery..and ES file explorer does go into the root directory .Go to ES file explorer -Settings -there will be a option called go up to root ..check that ..and press the back button it will go to ur root directory ..and i do have the ICS files for installing CWM ...
I never use that type of recovery,i m always use CWM and back button.
I ll tel my step :
1- make sure have all files and correct setting to remember while rooting and install CWM.
2- root the phone
3- install CWM
its easier...sorry not link to the right thread,it s already in the sticky.
btw...how you unlock your BL?test point or official way?
megatpanji said:
I never use that type of recovery,i m always use CWM and back button.
I ll tel my step :
1- make sure have all files and correct setting to remember while rooting and install CWM.
2- root the phone
3- install CWM
its easier...sorry not link to the right thread,it s already in the sticky.
btw...how you unlock your BL?test point or official way?
Click to expand...
Click to collapse
I hv all the files the problem i my phone is already rooted ...but it doent recognize it as a rooted phone and thats y i cannot install CWM dude is there any way to unroot my phone ..if i unroot my phione then i will be able to root it again u said that night-elf kernel has inbuilt recovery right ..so if i flash night Elf ..i will be able to access the recovery ..i dont ahve to install it again ryt??
Do you take files from this for rooting?
http://forum.xda-developers.com/showthread.php?t=1601038
or read this Madfysh post :
http://forum.xda-developers.com/showpost.php?p=26798415&postcount=141
if u flash night ELf,sirkay,suave kernel,u dont have to install CWM again,it s inbuilt.
megatpanji said:
Do you take files from this for rooting?
http://forum.xda-developers.com/showthread.php?t=1601038
or read this Madfysh post :
http://forum.xda-developers.com/showpost.php?p=26798415&postcount=141
if u flash night ELf,sirkay,suave kernel,u dont have to install CWM again,it s inbuilt.
Click to expand...
Click to collapse
Thanks so much dude that did it ..i had kernel problem .. thank you so much :victory:
How did you expect it to have root and recovery, AFTER you did a clean flash with flashtool?
Se phones doesn't have recovery partition. So no recovery on stock.
Madfysh said:
How did you expect it to have root and recovery, AFTER you did a clean flash with flashtool?
Se phones doesn't have recovery partition. So no recovery on stock.
Click to expand...
Click to collapse
+1
You need to root again, using Madyfish method.And when you enter doomlord tool, close flashtool or you will have errors.. (took me 1H to discover this ...)