Related
hey guys im really desprate i dont know what to do anymore !
i need help im doing a system repair because i had installed busybox and deleted it via root explorer in my system files
then my root broke my wifi also so im trying to do a system repair but when i click repair everything goes fine until connecting into flash mode i see the green led it proceed to the next step and then after a few seconds it says no newer software available try again later what can i do
thanks for taking the time to take a look !
Alright, I'll try helping out.
1st. xRecovery
Install xRecovery then do a full wipe of your phone... Dont forget to backup just in case.
2nd. FlashTool
Use FlashTool Through your computer and flash the official firmware.
3rd. Master reset.
FlashTool 0.2.6 - "http://forum.xda-developers.com/showthread.php?t=920746"
Decrypted Official ROMs - "http://forum.xda-developers.com/showthread.php?t=683793"
xRecovery - "http://forum.xda-developers.com/showthread.php?t=859571"
See if any of these methods work...
result :
my phone root is broken so it says successfully instaled xrecovery via the flashtool but i cant boot onto xrecovery it just do a normal startup
shahkam said:
result :
my phone root is broken so it says successfully instaled xrecovery via the flashtool but i cant boot onto xrecovery it just do a normal startup
Click to expand...
Click to collapse
Use PC Companion to repair your phone, then root, install busybox & xrecovery via flashtool.
Tehouster said:
Use PC Companion to repair your phone, then root, install busybox & xrecovery via flashtool.
Click to expand...
Click to collapse
that and If u want, do a manual installtion of xRecovery. lemme hit this up:
1st. make sure buzybox is installed, just in case, dl the installer from the market and run it.
2nd. dl xRecovery 0.3 and extract it. (preferebly on computer)
3rd. go into /res/raw/ and you'll find 3 files, copy and paste it into /system/bin/
then xRecovery should be back.
(i kinda do this often cause the auto install of xRecovery usually fails on my phone)
hi guys! I have x10 mini.
My phone is rooted but while using root explorer i have accidently deleted system/bin/sh and now my phone is not running apps which require root. I know it is a big mistake but can you guys find any solution to this!!!
Root your phone again and it wil work normal
Sent from my U20i using XDA Premium App
Lol start again and do full back ups
thanks again slade 87 ,sent from x10 mini pro cm7 15.0 ,,,,also on you tube (totalchris08) xbox360 (kormatoes ne5 ) ps3 (langtoes) ask my anything , I COULD KNOW THE ANSER OR I MIGHT NOT ,
i have tried rooting my phone again using super one click but it says "exec system/bin/sh failed".
Please help
Eyama said:
Root your phone again and it wil work normal
Sent from my U20i using XDA Premium App
Click to expand...
Click to collapse
Eyama! I have tried rooting my phone using super oneclick but it display an error message "exec system/bin/sh failed no such file or directory(2) "
Try factory reset if stil doesnt work then you must flash original SE rom and do everything from begining.
Or maybe if some one from mini thread make you flash zip for sh file.
Sent from my U20i using XDA Premium App
Eyama said:
Try factory reset if stil doesnt work then you must flash original SE rom and do everything from begining.
Or maybe if some one from mini thread make you flash zip for sh file.
Sent from my U20i using XDA Premium App
Click to expand...
Click to collapse
i have even tried flashing original se rom but it also displayed the same message"exec system/bin/sh failed no such file or directory(2)". Pls help!!!
Maybe you could try with difrent version of super one click or try with zroot
Sent from my U20i using XDA Premium App
Eyama said:
Maybe you could try with difrent version of super one click or try with zroot
Sent from my U20i using XDA Premium App
Click to expand...
Click to collapse
Is factory reset and rooting necessary for flashing original se rom???
well it is goot beacuse your phone is not bicked but backup your data and contacts and sms.
and try with this super one click.
Eyama said:
well it is goot beacuse your phone is not bicked but backup your data and contacts and sms.
and try with this super one click.
Click to expand...
Click to collapse
is root necessary for flashing original se rom????
If it is necessary then it is impossible for me!!!!!
uawasthi4 said:
is root necessary for flashing original se rom????
Click to expand...
Click to collapse
no it's not root after you flash original SE rom then install xrec or cmw i don't know witch version of recovery you are using in custom roms. then flash custom rom
EDIT:
1. flast SE rom via SEUS or SE PC Companion (or flashtool )
2. root your phone
3. instal xrecovery or cmw recovery
4.flash custom rom
5.enjoy
Eyama said:
no it's not root after you flash original SE rom then install xrec or cmw i don't know witch version of recovery you are using in custom roms. then flash custom rom
EDIT:
1. flast SE rom via SEUS or SE PC Companion (or flashtool )
2. root your phone
3. instal xrecovery or cmw recovery
4.flash custom rom
5.enjoy
Click to expand...
Click to collapse
flashtool is not working!!
SuperOneClick not working.
I am mentioning the code that it displays-
"Killing ADB Server...
OK
Starting ADB Server...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
OK
Waiting for device...
OK
Pushing rageagainstthecage...
3155 KB/s (585731 bytes in 0.181s)
OK
chmod rageagainstthecage...
- exec '/system/bin/sh' failed: No such file or directory (2) -
OK
Running rageagainstthecage...
- exec '/system/bin/sh' failed: No such file or directory (2) -
FAILED"
Eyama said:
no it's not root after you flash original SE rom then install xrec or cmw i don't know witch version of recovery you are using in custom roms. then flash custom rom
EDIT:
1. flast SE rom via SEUS or SE PC Companion (or flashtool )
2. root your phone
3. instal xrecovery or cmw recovery
4.flash custom rom
5.enjoy
Click to expand...
Click to collapse
flashtool not working-
it displays the following code-
"23/029/2011 14:29:58 - INFO - <- This level is successfully initialized
23/030/2011 14:30:03 - ERROR - Cannot identify your device. Found while expecting X10, E10, U20 or E15 (read from ro.product.model from build.prop)
23/030/2011 14:30:03 - INFO - Selecting from user input
23/030/2011 14:30:05 - INFO - Connected device : E10
23/030/2011 14:30:05 - INFO - Installed version of busybox : - exec '/system/bin/sh' failed: No such file or directory (2) -"
you must have usb debugging on for superoneclick an for flashtool i think
i don't know how is with flashtool beacuse i alway use SE PC Companion for flashing stock rom.
search in mini thread for the right superoneclick if this one didn't work.
Lol usb ,stay awake and mount sd. (Conect storage ) it can't fail only use seus I just used it. ,from stock to cm7 1hour 30 mins
Eyama said:
you must have usb debugging on for superoneclick an for flashtool i think
i don't know how is with flashtool beacuse i alway use SE PC Companion for flashing stock rom.
search in mini thread for the right superoneclick if this one didn't work.
Click to expand...
Click to collapse
Sent from my U20i using XDA App
Eyama said:
you must have usb debugging on for superoneclick an for flashtool i think
i don't know how is with flashtool beacuse i alway use SE PC Companion for flashing stock rom.
search in mini thread for the right superoneclick if this one didn't work.
Click to expand...
Click to collapse
how to use se pc companion for flashing stock roms???
uawasthi4 said:
how to use se pc companion for flashing stock roms???
Click to expand...
Click to collapse
Guys!!!
I had already rooted by phone but while using root explrorer to install xrecovery i accidentaly deleted system/bin/sh and now no no rooting software(incl. zroot and superone click) is being able to root my phone again. i tried for factory data reset but after doing so my phone now fails to detect network service(sim card). I am in a big trouble. Please help
Eyama said:
you must have usb debugging on for superoneclick an for flashtool i think
i don't know how is with flashtool beacuse i alway use SE PC Companion for flashing stock rom.
search in mini thread for the right superoneclick if this one didn't work.
Click to expand...
Click to collapse
Guys!!!
I had already rooted by phone but while using root explrorer to install xrecovery i accidentaly deleted system/bin/sh and now no no rooting software(incl. zroot and superone click) is being able to root my phone again. i tried for factory data reset but after doing so my phone now fails to detect network service(sim card). I am in a big trouble. Please help
uawasthi4 said:
how to use se pc companion for flashing stock roms???
Click to expand...
Click to collapse
download program from SE oficial site
1.conect your powerd on phone to pc
2.click start on support zone
3.under phone software update click start
4.then repair it
5.folow the program for update/repairing phone
HellO I need help ... I am having neov with unlocked bootloader, rooted , and CWM installed
ON my neov Yesterday I tried installing Night-elf kernel experimental lite v9.6 through flashtool and i failed ..although the process was successful ..whenever i turned on my phone ..the sony ericsson logo flashed and nothing happened . Then i used flastool to get back to my stock android ICS ver 4.1.B.0.431. Now my problems are :
1. MY phone doesnt go in to the recovery when i press the volume down button when the sony logo appears
2. My phone doesnt recognize itself as rooted ..but i can go to the root directory when i use ES file explorer.
3. I Repaired my phone using PC companion but still the same problem.
4. I tried to root my phone again using doomlords method but it failed and without it i cannot install CWM
1. with CWM installed,i press back button to go recovery.Night elf kernel have built-in CWM installed.
2. you have to root your phone.My ES file explorer didnt go to root directory even my phone rooted,it always show SD card content.
3. Dont understand what you repair for
4. Make sure you have the right file for install CWM.there is for GB and ICS...
megatpanji said:
1. with CWM installed,i press back button to go recovery.Night elf kernel have built-in CWM installed.
2. you have to root your phone.My ES file explorer didnt go to root directory even my phone rooted,it always show SD card content.
3. Dont understand what you repair for
4. Make sure you have the right file for install CWM.there is for GB and ICS...
Click to expand...
Click to collapse
I went back to my stock rom so that means i hv a stock kernel ..and in stock kernel u hv to press the volume down button to go into recovery..and ES file explorer does go into the root directory .Go to ES file explorer -Settings -there will be a option called go up to root ..check that ..and press the back button it will go to ur root directory ..and i do have the ICS files for installing CWM ...
I never use that type of recovery,i m always use CWM and back button.
I ll tel my step :
1- make sure have all files and correct setting to remember while rooting and install CWM.
2- root the phone
3- install CWM
its easier...sorry not link to the right thread,it s already in the sticky.
btw...how you unlock your BL?test point or official way?
megatpanji said:
I never use that type of recovery,i m always use CWM and back button.
I ll tel my step :
1- make sure have all files and correct setting to remember while rooting and install CWM.
2- root the phone
3- install CWM
its easier...sorry not link to the right thread,it s already in the sticky.
btw...how you unlock your BL?test point or official way?
Click to expand...
Click to collapse
I hv all the files the problem i my phone is already rooted ...but it doent recognize it as a rooted phone and thats y i cannot install CWM dude is there any way to unroot my phone ..if i unroot my phione then i will be able to root it again u said that night-elf kernel has inbuilt recovery right ..so if i flash night Elf ..i will be able to access the recovery ..i dont ahve to install it again ryt??
Do you take files from this for rooting?
http://forum.xda-developers.com/showthread.php?t=1601038
or read this Madfysh post :
http://forum.xda-developers.com/showpost.php?p=26798415&postcount=141
if u flash night ELf,sirkay,suave kernel,u dont have to install CWM again,it s inbuilt.
megatpanji said:
Do you take files from this for rooting?
http://forum.xda-developers.com/showthread.php?t=1601038
or read this Madfysh post :
http://forum.xda-developers.com/showpost.php?p=26798415&postcount=141
if u flash night ELf,sirkay,suave kernel,u dont have to install CWM again,it s inbuilt.
Click to expand...
Click to collapse
Thanks so much dude that did it ..i had kernel problem .. thank you so much :victory:
How did you expect it to have root and recovery, AFTER you did a clean flash with flashtool?
Se phones doesn't have recovery partition. So no recovery on stock.
Madfysh said:
How did you expect it to have root and recovery, AFTER you did a clean flash with flashtool?
Se phones doesn't have recovery partition. So no recovery on stock.
Click to expand...
Click to collapse
+1
You need to root again, using Madyfish method.And when you enter doomlord tool, close flashtool or you will have errors.. (took me 1H to discover this ...)
Help me..
Can not reboot into CWM..
I just reflash my phone, and then root it with the way that I usually use..
But today when I try to root it, I mean on progress by using DooMLoRD_v1_Xperia-2011 my computer reboot and after boot complete a prompt appears that said "Windows has just recovered from serious error" and give an option "send an error report" or "don't send"
After that, re-root it by using the same way and then install the CWM with install-cwm1.cmd(it also I usually use). It run normally, I think everything was OK.
But when I try to boot into CWM it get stuck on the "SONY" logo.
What is going wrong?
I have try to re-flash again, re-root and re-install the CWM still does not work
I think maybe there was a problem with the permission so I attached screenshot of the root and /system
*I have search before posting but can't find the answer
drafha said:
Help me..
Can not reboot into CWM..
I just reflash my phone, and then root it with the way that I usually use..
But today when I try to root it, I mean on progress by using DooMLoRD_v1_Xperia-2011 my computer reboot and after boot complete a prompt appears that said "Windows has just recovered from serious error" and give an option "send an error report" or "don't send"
After that, re-root it by using the same way and then install the CWM with install-cwm1.cmd(it also I usually use). It run normally, I think everything was OK.
But when I try to boot into CWM it get stuck on the "SONY" logo.
What is going wrong?
I have try to re-flash again, re-root and re-install the CWM still does not work
I think maybe there was a problem with the permission so I attached screenshot of the root and /system
*I have search before posting but can't find the answer
Click to expand...
Click to collapse
When you flashed the ROM, did you reset to factory settings and wipe away everything?
Doing so might have wiped the recovery too. There is nothing to worry about thou.
I am not sure whether you will be willing to do so, but I would suggest you unlock your boot loader and flash a kernel with built in recovery. A sample of that will be the FreeXperiaProject (FXP) CynogenMod (CM) 10 ROM's kernel. (search for "FXP 144 CM 10")
If you haven't flashed a kernel before, I can elaborate on the procedure or you can look it up on some other threads where it is already explained.
srmrox said:
When you flashed the ROM, did you reset to factory settings and wipe away everything?
Doing so might have wiped the recovery too. There is nothing to worry about thou.
I am not sure whether you will be willing to do so, but I would suggest you unlock your boot loader and flash a kernel with built in recovery. A sample of that will be the FreeXperiaProject (FXP) CynogenMod (CM) 10 ROM's kernel. (search for "FXP 144 CM 10")
If you haven't flashed a kernel before, I can elaborate on the procedure or you can look it up on some other threads where it is already explained.
Click to expand...
Click to collapse
I flash it using SEUS, and I know it will wipe every mod on the system. I have do it several times.
I will explain the way that I usually did. Flash using SEUS -> Power off -> Flash kernel to MT11i 562(if I not wrong, i forget the number) using Flashtool -> Power on-> Root it using DooMLoRD rooting toolkit -> Power off -> Flash back to stock .587 kernel using flashtool -> Power on -> Install CWM by using the install-cwm1.cmd then reboot to recovery..
I get stuck on SONY logo just for now. I think it caused by the windows error that happened when I root it..
I also try X-parts but it does not affect anything. The LED does not show when boot, also nothing happened when I press any button during boot. Also it look like does not touch or add any file to the /system
have u repair with SEUS?
or maybe try flash FTF file with flashtool
reflash with SEUS
re-download root toolkit and CWM installer
disable your antivirus (if you have it)
try again
if it fails, post the logs of root and CWM install process..
megatpanji said:
have u repair with SEUS?
or maybe try flash FTF file with flashtool
Click to expand...
Click to collapse
I had try both of them, still does not work
Madfysh said:
reflash with SEUS
re-download root toolkit and CWM installer
disable your antivirus (if you have it)
try again
if it fails, post the logs of root and CWM install process..
Click to expand...
Click to collapse
I had try reflash with SEUS, also reflash with Flashtool but still can't get it work..
I still have the zipped file of the root toolkit and the CWM Installer on my flashdisk, so I just re-extract them and still does not work..
Disable antivirus not yet tested, but previously I also did the same thing on this computer and everything was OK..
I will post the log, btw where can I find the logs file of root and CWM install process?
Is it?
Rooting:
Installing CWM:
Today I also try use another PC, and re-download the Rooting Toolkit and CWM Installer..
Still, stuck on SONY logo when try to boot into CWM..
Sunday I wil try to unlock the bootloader and flash another ROM, will report the result soon..
drafha said:
Today I also try use another PC, and re-download the Rooting Toolkit and CWM Installer..
Still, stuck on SONY logo when try to boot into CWM..
Sunday I wil try to unlock the bootloader and flash another ROM, will report the result soon..
Click to expand...
Click to collapse
Fisrtly you have to root by flashing 652 kernel from flashtool.. Then you get root accessand now you can cwm recovery..
Sent from my MT11i
Yeah, of course you will need neov ics kernel to get root, then flash back original ics kernel. I've suffered a lot of problems with root and cwm, so:
-flashtool: be sure ho have max one firmware in "firmwares" folder at once, then be sure to check the right boxes on the right.
-rooting toolkit: disable internet connection, disable antivirus and firewall (maybe also "User control" in vista-7). Extract "runme.bat" and "files" folder directly into root directory in your PC (it is where you find "windows", "program files"...). So enlarge the explorer windows because it needs to be "on background sight", then open "runme.bat".
-cwm: use the android application "cwm-auto-installer" which is the previous version of "X-parts", you can find it in pureness 13 add-on page. There are many cwm installer which doesn't work, I don't know why.
Ysharief said:
Fisrtly you have to root by flashing 652 kernel from flashtool.. Then you get root accessand now you can cwm recovery..
Sent from my MT11i
Click to expand...
Click to collapse
Of course, I know it. Have you read may previous post? I have post the step by step that I used for rooting and installing the CWM..
Bertellio said:
Yeah, of course you will need neov ics kernel to get root, then flash back original ics kernel. I've suffered a lot of problems with root and cwm, so:
-flashtool: be sure ho have max one firmware in "firmwares" folder at once, then be sure to check the right boxes on the right.
-rooting toolkit: disable internet connection, disable antivirus and firewall (maybe also "User control" in vista-7). Extract "runme.bat" and "files" folder directly into root directory in your PC (it is where you find "windows", "program files"...). So enlarge the explorer windows because it needs to be "on background sight", then open "runme.bat".
-cwm: use the android application "cwm-auto-installer" which is the previous version of "X-parts", you can find it in pureness 13 add-on page. There are many cwm installer which doesn't work, I don't know why.
Click to expand...
Click to collapse
Yes, I have the MT15i kernel .587, MT11i .562 and MT15i .587 Global ftf..
Previously I always flashing, rooting, installing the CWM with the internet connection enabled, firewall enabled, antivirus enabled and everything work fine.
It just happened since I got my PC restarted when rooting and then the PC prompt "Windows has just recovered from serious error"
drafha said:
Yes, I have the MT15i kernel .587, MT11i .562 and MT15i .587 Global ftf..
Previously I always flashing, rooting, installing the CWM with the internet connection enabled, firewall enabled, antivirus enabled and everything work fine.
It just happened since I got my PC restarted when rooting and then the PC prompt "Windows has just recovered from serious error"
Click to expand...
Click to collapse
Search for pc app usbdeview and by this you can uninstall all usb drivers.. After that install drivers from flashtool connect your phone.. And root then flash cwm..
Try different types to reinstall drivers.. May be sometimes drivers get corrupt
Sent from my MT11i
drafha said:
Yes, I have the MT15i kernel .587, MT11i .562 and MT15i .587 Global ftf..
Previously I always flashing, rooting, installing the CWM with the internet connection enabled, firewall enabled, antivirus enabled and everything work fine.
It just happened since I got my PC restarted when rooting and then the PC prompt "Windows has just recovered from serious error"
Click to expand...
Click to collapse
Restart of the pc could be linked to driver faliure and the BSOD (the prompt) could be an hint about it.
For the cwm try to download that "cwm auto installer" from pureness page, but do not update the app. This is the only way that I have to install cwm.
Sent from my MT15i using xda app-developers app
Ysharief said:
Search for pc app usbdeview and by this you can uninstall all usb drivers.. After that install drivers from flashtool connect your phone.. And root then flash cwm..
Try different types to reinstall drivers.. May be sometimes drivers get corrupt
Sent from my MT11i
Click to expand...
Click to collapse
I had try install Flashtool on another PC then Install the ADB driver, fastboot driver and flashmode driver but i got the same result
Bertellio said:
Restart of the pc could be linked to driver faliure and the BSOD (the prompt) could be an hint about it.
For the cwm try to download that "cwm auto installer" from pureness page, but do not update the app. This is the only way that I have to install cwm.
Sent from my MT15i using xda app-developers app
Click to expand...
Click to collapse
Do you mean CWM Auto Installer now called X-parts? I also had try this, by using this it look like my /system partition not touched by it.. When reboot the LED does not show, also when on the SONY logo I press any key but nothing happens. It just boot like normally into system, does not get stuck nor get to the CWM.. Really nothing happened..
Btw will it have a problem with the hardware???
Ok, I remember one time when I wasn't able to install it at all. It was with JS 7.3, I had to give up and restore a fresh firmware (there were some other problems).
I don't think you have hardware problem, it seems that cwm can't be installed in your phone. So try to install ADB drivers again on PC, then flash new firmware, get root and retry.
Anyway there is a little possibility that cwm can't be installed because of low free space in /system partition...
Sent from my MT15i using xda app-developers app
Yes.. The main thing is adb drivers.. Uninstall it and reinstall.. Then everything should work.. Make sure you are on 652 kernel and rooted.. If you are rooted then xparts should work..
Try this flash alternet recovery from xparts and flash latest recovery..try it couple of times. Same problem I too faced earlier..do screen rotation off then install alternate recovery select 5.3 after flashing it says reboot to check.. And after it install latest recovery.. fingers cross..:sly:
Sent from my MT11i
To All user im a noob. Plz help me root my sola using back up & restore app by bin4ry. Because when I try to root my sola. When I hit the restore button. It always said that reconnect external memory and try again. Plz help.
Sent from my MT27i using xda premium
Just ignore that error and press ok, it should still root just fine after reboot Which f/w are you on ? If you're using B.1.54,you need to flash B.1.10 kernel first then root, and then flash back B.1.54 kernel
Reply here if you have more doubts
Im in b.154 so I need to flash back. Then I root my unit. Thanks in advice il try when I go home.
Sent from my MT27i using xda premium
year Presupf
i am trying to root too, i am doing this http://forum.xda-developers.com/showpost.php?p=35024193&postcount=1
stuck at step 2, i dont understand 3) from this post http://forum.xda-developers.com/showthread.php?p=34681352#post34681352
how do you do "choosing "Charge only" in "USB connection type" options" in windows?
tried doing this too didnt work either http://forum.xda-developers.com/showpost.php?p=35771046&postcount=1410
niborl said:
i am trying to root too, i am doing this http://forum.xda-developers.com/showpost.php?p=35024193&postcount=1
stuck at step 2, i dont understand 3) from this post http://forum.xda-developers.com/showthread.php?p=34681352#post34681352
how do you do "choosing "Charge only" in "USB connection type" options" in windows?
tried doing this too didnt work either http://forum.xda-developers.com/showpost.php?p=35771046&postcount=1410
Click to expand...
Click to collapse
Are you trying to root on .10 or .54 firmware?
You need to flash .10 first, then you root with binary method. After that, you flash .54 and it should be rooted.
You get stuck while trying to do it on .10?
guys.. clam down!!!
1st Flash your MObile with .10 and
Root with binary and
it will something like in backup and restore
restore it
and your phone will restart
and done it will be rooted
and flash back .54
i am on .54 firmware, flashed .10, got the below attachment after binary, and flashed .54
when i open titanium backup it says root access failed? i want to remove bloatware and if the phone is still slow then i will flash a custom rom
niborl said:
i am on .54 firmware, flashed .10, got the below attachment after binary, and flashed .54
when i open titanium backup it says root access failed? i want to remove bloatware and if the phone is still slow then i will flash a custom rom
Click to expand...
Click to collapse
It means the File is Damaged or Incorrect Root with this..
Extract the Rar file..
Flash .10 kernal
make sure you have both ticked on USB debugging and UNKNOWN market.
and double click RunMe.bat file..
and it will give some message about backup
Restore it and It will Restart..
You are done
And flash.54 kernal..
titanium backup has root access! i think i got this custom recovery http://forum.xda-developers.com/showthread.php?t=1773227
i read a bunch of stuff and i think i should have nandroid backup before trying a custom rom
i am following this http://forum.xda-developers.com/showthread.php?t=1716511
boot into recovery means go into flashmode right? but nothing shows up on the phone screen, just the green light on top right
Follow.steps.correctly as sola can b rooted on. 10
Flash those kernel dont fastboot!!
Use binary ver18.7 those wrking
Nd then reflash back to. 54!!
Sent from my MT27i using xda premium