Hi,
I was trying to flash recovery mode and after the last step I get this on my cellphone.
Fastboot mode started
udc_start()
if I connect it to USB I get
Fastboot mode started
udc_start()
--suspend--
--reset--
-- portcharge--
--reset--
--portcharge--
fastboot; processing comands
I am able to boot into emergency mode, but removing the battery and letting it off is not doing the trick.
All I want at this point is to have my phone back with system recovery or not.
Also, I cant seem to find mt cellphones Official rom, I looked it up and nothing turns out. (using this guide http://forum.xda-developers.com/showthread.php?t=865479 )
Thanks a lot and hopefully you can all help!!
Where are you from? That will give us a start on finding you the right ROM to flash.
AzNxJoHnNy said:
Where are you from? That will give us a start on finding you the right ROM to flash.
Click to expand...
Click to collapse
Santiago, Chile
my Carrier is Entel
Its there,
AENTBI ENT/ENTEL(CHILE) CDMA LGP500H
OR
AENTBK ENT/ENTEL(CHILE) CDMA LGP500H
not sure on the difference tho
EDIT: looking at all the other roms, it seems that the ones ending with 'K' is more appropriate? Or if anyone know what it stands for it would help a lot =D
AzNxJoHnNy said:
Its there,
AENTBI ENT/ENTEL(CHILE) CDMA LGP500H
OR
AENTBK ENT/ENTEL(CHILE) CDMA LGP500H
not sure on the difference tho
EDIT: looking at all the other roms, it seems that the ones ending with 'K' is more appropriate? Or if anyone know what it stands for it would help a lot =D
Click to expand...
Click to collapse
hmmm but can you manage to get the download file?
Related
Hi all! My friend´ve a Hero and after radio update the phohe has bricked. See this video:
http://www.youtube.com/watch?v=R5ihQU7DoDU
How to fix this?
Thanks.
Nobody know?
It´s such!
Someone may be able to help you if you give us generous details. ie which radio rom did you intend to flash?
Lord Lucan said:
Someone may be able to help you if you give us generous details. ie which radio rom did you intend to flash?
Click to expand...
Click to collapse
Radio: 6.35.09.26
ROM: Modaco-3.1
Recovery: RAV-hero-v1.5.3.1
Thanks for u support.
Have you tried turning it on while the charger is plugged in?
Lennyuk said:
Have you tried turning it on while the charger is plugged in?
Click to expand...
Click to collapse
Yeah, but charger don´t works on flash image and the battery is fully!
:S
Thanks.
And you have tried to go back into the recovery?
Lennyuk said:
And you have tried to go back into the recovery?
Click to expand...
Click to collapse
Recovery and fastboot don´t work. The video show this.
It´s hard solved
Thanks.
fabioccoelho said:
Recovery and fastboot don´t work. The video show this.
It´s hard solved
Thanks.
Click to expand...
Click to collapse
Try turning it on with the power button and the second you see any life hold down home.
I don't think this will work but it might be worth a try.
its already in recovery,you have adb debugging enabled before update?
Try this in a CMD Window..
adb devices
if it works you could be ok
bonesy said:
its already in recovery,you have adb debugging enabled before update?
Try this in a CMD Window..
adb devices
if it works you could be ok
Click to expand...
Click to collapse
Yeah, adb debug is check! But, i can´t access fastboot or recovery mode.
Thanks.
copy ra_hero recovery onto the root of your sdcard
then...
adb shell flash_image recovery recovery-RA-hero-v1.5.3.1.img
oradb shell flash_image recovery-RA-hero-v1.5.3.1.img
I cant remember which soryy, but one should work!
device not found
Hi! I am in the same s..t so I tried it all
some people managed to do this and get it working again :
-On the PC, i ran the command 'fastboot boot recoveryimage.img'.
-At this point the command says 'waiting for device' (or something like that).
-I removed the battery.
-I Connected USB.
-I inserted the battery.
-I booted the phone while holding the HOME key.
-The phone still froze at the first splash screen, but then suddenly, the waiting fastboot command detected the phone and booted the recovery image! Yay!
MINE IS EXACTLY LIKE THE YOUTUBE VIDEO and it didn't!
Any other sugestions?
[email protected]
yea i think u have different problems,his goes to recovery.yours is doing the same as my Sapphire which is being collected by HTC tomorrow for repair pressing HOME+POWER will not get to fastboot! it will take you too recovery
and finaly the FIX
finally some one knew how to fix my HERO!
a guy with a lot of electronics knowledge and a device that connected directly to the matherbord and wiped the rom and rewrote it!
rom gets stock if you are smart enough to flush it with the wrong update (CMDA ta a GSM phone)!
so that's the only solution for this kind of situations!
Thanks for all answers. But only kind to solved this is with JTAG to Motherboard.
Thanks!
same issue here
Hi everyone
I've got the same problem showed in that video. Could you guys help me out? Is JTAG the only way? My mobile simply can't be recognize on Windows and ADB just doesn't list the device...
I've tried every key button combination, but all I got is that Out of the Box image (seems like it's the background of the recovery mode or smthg)
I got my phone charged from USB (from my notebook) but windows doesn't recognize it, even if I dloaded the drivers for it.
Any suggestion would be of great help
Thx a bunch
TAG
same issu here
MESCU said:
finally some one knew how to fix my HERO!
a guy with a lot of electronics knowledge and a device that connected directly to the matherbord and wiped the rom and rewrote it!
rom gets stock if you are smart enough to flush it with the wrong update (CMDA ta a GSM phone)!
so that's the only solution for this kind of situations!
Click to expand...
Click to collapse
Hi MESCU
Could you tell us a little bit more about what happened to your phone and what procedure the guy who fixed your phone did? thx for your help
TAG
phone and the box image
sorry if this is a bit out of place but i had something similiar but not as major...i just tried flashing my radio update today and it went well till it said reboot press home and power...i pressed that then it got stuck in phone and box picture for a good 5 minutes..i didnt know how long to late because im new to this..thankfully when i pressed home and power and it came back to the recovery and i just reboot and it works fine now!
Hi all. I would like to know how to reflash original firmware for my phone. It seems I messed it up when I tried flashing a new recovery through fastboot. Now it just shows the LG logo then turns right off when turned on. I can still enter Emergency mode, so I can probably reflash it with the original firmware. If you guys have a better idea please let me know.
search for kz updte
arvinoids said:
Hi all. I would like to know how to reflash original firmware for my phone. It seems I messed it up when I tried flashing a new recovery through fastboot. Now it just shows the LG logo then turns right off when turned on. I can still enter Emergency mode, so I can probably reflash it with the original firmware. If you guys have a better idea please let me know.
Click to expand...
Click to collapse
For steps how-to looks here
For KDZ updater search KDZ_FW_UP on google
For list of fw, try look here. Few pepople report, that have some problems. If you didn't find what you search for, just try download FW from other nearest country.
Hi, can someone please help to upload the SEA firmware ? There seems to be a problem downloading it from lgmobile
http://forum.xda-developers.com/showpost.php?p=9758751&postcount=1
Usethis rom for 10C
csmg.lgmobile.com:9002/swdata/WEBSW/LGP500/ASEABK/V10c_00/V10C_00.kdz
(SEA)
Verify if you have access into port 9002.
The_ERROR said:
http://forum.xda-developers.com/showpost.php?p=9758751&postcount=1
Usethis rom for 10C
csmg.lgmobile.com:9002/swdata/WEBSW/LGP500/ASEABK/V10c_00/V10C_00.kdz
(SEA)
Verify if you have access into port 9002.
Click to expand...
Click to collapse
I can't seem to load that page. How do I verify for port access 9002?
I tested it just minute before, so I'm sure, that it works.
Test:
Start -> Run... -> cmd
in command line enter:
telnet csmg.lgmobile.com 9002 - brobably you get following:
...>telnet csmg.lgmobile.com 9002
Connecting To csmg.lgmobile.com...Could not open connection to the host, on port
9002: Connect failed
1) Try switch off firewall
2) Find some free proxy on internet and use it for proxying of connection
3) I try prepare this for you (I'm on work and here port 9002 is not allowed, so I have to download it remotely through my router at home and I have slow speed connection )
Thanks alot ! it's working now! using 3g to download via tethering on iphone!
adrianghaust said:
Thanks alot ! it's working now! using 3g to download via tethering on iphone!
Click to expand...
Click to collapse
Fine!! You are welcome!
The_ERROR said:
For steps how-to looks here
For KDZ updater search KDZ_FW_UP on google
For list of fw, try look here. Few pepople report, that have some problems. If you didn't find what you search for, just try download FW from other nearest country.
Click to expand...
Click to collapse
i have the exact same problem !!!!!!!! you fixed yours ??? how ?!?!? plz help me !!!!!
www.forum.xda-developers.com/showthread.php?t=1060121
to reflash official firmware go to the link above our click on the link in my signature.
same problemmmm !!!!!!!! plz help !!!!! :'(
I know there is threads about this, but I am having troubles, I will be willing to donate $20 to anyone who can help me. I am hoping it will be relatively easy............. I shouldn't have said that.
I loaded a bad framework-res.apk on my phone, and now it won't boot.
I have read DG's thread on recovering from the brick, but I can't figure out how to make it work.
In order to get the framework loaded I used root explorer to copy it over, because I couldn't get ADB to push the file. (I know, if I couldn't get ADB to work why would I muck with it....)
Now the first step in his guide is to boot into fastboot and wait for adb to work, then use superoneclick and hit 'shell root'
well, I can load into fastboot, but adb consistently says "error: device not found" or it doesn't list anything when I check devices. The troubles I was having before with adb were with pushing files, I could still see the device and pull files.
When I did the superoneclick step it ended up freezing the program, and I am not sure what is supposed to happen with fastboot but all it said was starting fastboot protocol support then did nothing.
I would be very grateful to anyone who can help me with this problem, I do have a backup framework on my computer and on the external sd card in the phone.
One thing I should note is that I did originally boot into the recovery mode, but all i did from there was reboot the phone (and go into fastboot mode).
Please help me! I have learned my lesson.
does the phone turn on
Do you have USB debugging enabled?
If you do, its possible to use adb by selecting Early USB Enumeration from boot menu. If not, you'll need to reflash using an SBF.
Come to my gtalk id texasdude11 and I'll help you out on chat.
Sent from my MB860 using Tapatalk
brian2220 said:
does the phone turn on
Click to expand...
Click to collapse
from what i gather, it turns on, but won't fully boot into android.
by that token, early USB enumeration will allow ADB to work on the phone usually, but in this case i believe debugging was turned off before his device was bricked. so, he can't boot into full android UI, and also can't use ADB to push the restore files because debugging is off.
i've seen this problem with one person before, but i couldn't find a way to force debugging on without going into the UI, if someone can chime in with a way to turn debugging on without initial ADB access, or UI then this problem is solved and more than one person is helped.
Although - he can just reflash if he's on AT&T, if he's on Bell then he's SOL
brian2220 said:
does the phone turn on
Click to expand...
Click to collapse
Sorry, I obviously suck at giving info.
The phone boots but not past the moto screen, I get the flashing red lights and it reboots. I can get into recovery and fastboot (though I suspect fast boot isn't work right since it freezes almost instantly), I also cant see the device in adb while trying fast boot (or anything else for that matter). I could before it bricked.
raybond25 said:
from what i gather, it turns on, but won't fully boot into android.
by that token, early USB enumeration will allow ADB to work on the phone usually, but in this case i believe debugging was turned off before his device was bricked. so, he can't boot into full android UI, and also can't use ADB to push the restore files because debugging is off.
i've seen this problem with one person before, but i couldn't find a way to force debugging on without going into the UI, if someone can chime in with a way to turn debugging on without initial ADB access, or UI then this problem is solved and more than one person is helped.
Click to expand...
Click to collapse
I think debugging was on, but I was also in USB data mode (the one above none). And yes, I am the poor Bell SOL'er.
toughbax said:
Sorry, I obviously suck at giving info.
The phone boots but not past the moto screen, I get the flashing red lights and it reboots. I can get into recovery and fastboot (though I suspect fast boot isn't work right since it freezes almost instantly), I also cant see the device in adb while trying fast boot (or anything else for that matter). I could before it bricked.
Click to expand...
Click to collapse
hold the volume up and the power button together and see if u can get into RSD engineering screen
and just follow this and flash everything over
http://forum.xda-developers.com/showthread.php?t=991072
Id download RSD 5 and one of the sbf files 1.26 or 1.52 and boot phone into rsd(power button+volume up) and flash the sbf
lsxrx7 said:
hold the volume up and the power button together and see if u can get into RSD engineering screen
and just follow this and flash everything over
http://forum.xda-developers.com/showthread.php?t=991072
Click to expand...
Click to collapse
blaque72 said:
Id download RSD 5 and one of the sbf files 1.26 or 1.52 and boot phone into rsd(power button+volume up) and flash the sbf
Click to expand...
Click to collapse
the problem is that he's on Bell, so there's no sbf for us poor Bell users to flash to yet.
raybond25 said:
the problem is that he's on Bell, so there's no sbf for us poor Bell users to flash to yet.
Click to expand...
Click to collapse
Blah guess I should be more observate when trying to help my apologies hope someone on bell helps him
blaque72 said:
Blah guess I should be more observate when trying to help my apologies hope someone on bell helps him
Click to expand...
Click to collapse
yeah, i don't think he explicitly said that, but i just PM'ed him because i guessed that that was the case and it was, i'm on Bell and ima see what i can do
I HAVE BEEN SAVED. Thank you all for your quick help. I am now up and running again and I have learned from my mistakes.
Kudos to Kenneth for his amazingly quick response and supplying me with an idiot proof script to get my phone back to exactly where it was. YOU DA MAN!
Honorable mention to raybond25 for the quick response and solution as well, YOU DA CANADIAN MAN!
toughbax said:
I HAVE BEEN SAVED. Thank you all for your quick help. I am now up and running again and I have learned from my mistakes.
Kudos to Kenneth for his amazingly quick response and supplying me with an idiot proof script to get my phone back to exactly where it was. YOU DA MAN!
Honorable mention to raybond25 for the quick response and solution as well, YOU DA CANADIAN MAN!
Click to expand...
Click to collapse
What was the solution?
shawnbuck said:
What was the solution?
Click to expand...
Click to collapse
NO IDEA.
Kenneth made me a script that did it all for me all I did was hit the space bar a few times.
Basically the problem seemed to be on this side of the keyboard.....
Moved to Q&A
Please post this script so that we may use this in the future
yes, please post the script toughbax or kenneth so that all can benefit from it, i already bricked and returned one atrix and cant afford to brick another. thanks in advance toughbax and kenneth
erik10002 said:
yes, please post the script toughbax or kenneth so that all can benefit from it, i already bricked and returned one atrix and cant afford to brick another. thanks in advance toughbax and kenneth
Click to expand...
Click to collapse
The problem is that the script that ken wrote for the OP only restores the framework-res.apk file, and nothing else. If you really need this to recover from soft brick in the first place I'm not sure if you have the ability to edit it the way that is required.
Sent from my MB860 using XDA App
raybond25 said:
from what i gather, it turns on, but won't fully boot into android.
by that token, early USB enumeration will allow ADB to work on the phone usually, but in this case i believe debugging was turned off before his device was bricked. so, he can't boot into full android UI, and also can't use ADB to push the restore files because debugging is off.
i've seen this problem with one person before, but i couldn't find a way to force debugging on without going into the UI, if someone can chime in with a way to turn debugging on without initial ADB access, or UI then this problem is solved and more than one person is helped.
Although - he can just reflash if he's on AT&T, if he's on Bell then he's SOL
Click to expand...
Click to collapse
Freaking beautiful. Early USB enumeration was just what I needed to fix my f*ck up.
Hi guys, I want to go back to Default Stock Android 2.2 ROM [HTC Sense] because I am selling this phone tomorrow. I currently have CM7.1 installed. How to go back in a safe way?
Just download this open it, connect your phone and follow
And if it gives an error make sure you have a goldcard inserted
I am from India. So is it Indian ROM?
asifisbest said:
I am from India. So is it Indian ROM?
Click to expand...
Click to collapse
Ooh okay, so since you are from Asia you should use this
Thank you!
Got it back to Default ROM! Thanks XDA members!
Hitmax117 said:
Just download (link) open it, connect your phone and follow
And if it gives an error make sure you have a goldcard inserted
Click to expand...
Click to collapse
I have the same problem as asifisbest. I want to sell my phone but I rooted it and installed a different ROM. I tried your suggestion, but the best I got so far was it loading the "recovery" but all I see on the phone is the HTC logo and after a while the RUU quits saying that there is an error. But sometimes it doesn't even find the phone and gives me a USB connection error, although adb sees the phone just fine. I have no idea what I'm doing and your help would be greatly appreciated.
Thanks
infinit1 said:
I have the same problem as asifisbest. I want to sell my phone but I rooted it and installed a different ROM. I tried your suggestion, but the best I got so far was it loading the "recovery" but all I see on the phone is the HTC logo and after a while the RUU quits saying that there is an error. But sometimes it doesn't even find the phone and gives me a USB connection error, although adb sees the phone just fine. I have no idea what I'm doing and your help would be greatly appreciated.
Thanks
Click to expand...
Click to collapse
I got it working. I feel so silly, it was that the drivers were not properly installed. I heard Windows play the sound when it can't install the driver while the phone rebooted into "Recovery mode". So I opened device manager and had it search for one and presto it found the correct driver. Ran the RUU again and it worked like a charm!
Now, let's try to sell this phone!
Before some of you gets upset with me posting the same kind of question, please know that I looked at the forum everywhere plus some other forums and tried almost everything. Here's the summary.
I recently got Droid Razr Asia version and I upgraded to EU Retail rom n rooted it.
There was one problem that I noticed that only bluetooth was not working.
Checked online, and found out that it's the radio mismatch b/w EU and Asia version.
So I downloaded RAZRX rom and was trying to flash it again with bootstrap.
So the process started and in 10 seconds it failed.
So I tried to search other forums ...
at some place i found that ... after Hard Resetting, clearing catche; I am also supposed to format the system.
So I followed the whole procedure, and turns out that again it does not get FLASHED. So I downloaded the ASIA version again and tried to format. It did not work. I tried with EU version, it did not work.
So after getting tired, I tried with RSDLite to flash through PC.
That's when I found out that ...
It detects the phone ... but the phone has no EMEI, software version or any other details. Everything is n/a.
Still I tried, and it said "fastboot installation failed" or somethin like that.
And now my phone is stuck on red motorola logo.
I tried to power off and go to bootloader fastboot ...
and it says "Fastboot Locked ... Press power button to power down."
I tried with the DroidRazrUtility1.4 also ...
But it does not detect the phone.
I tried other few things I found online. But nothing worked.
I also drained the battery by keeping it aside to see if the fastboot gets unlocked, but it didn't work.
However, I haven't removed the battery yet. Cause I do not have the tools.
Please can somebody tell me step by step approach how to do this?
Because I haven't found out where I am going wrong in the given methods. and btw, I have followed everything exactly step by step.
Really appreciate any kind of help.
Thank you very much.
Try to flash with RSD Alternative
http://forum.xda-developers.com/showthread.php?t=1453660
Thanks a ton.
But will it still work if my AP FATBOOT mode says that "Device is Locked"
And the battery is on low?
samthehell said:
Thanks a ton.
But will it still work if my AP FATBOOT mode says that "Device is Locked"
And the battery is on low?
Click to expand...
Click to collapse
Probably not. I read on one of the forums there might be a way around the battery being low. I think it was here in xda. Do a search for fast boot install or battery, something like that. If you find that doesn't work you would have to make the tbh cable which allows power to the phone without a battery, or in your case a near dead battery.
Sent from my Droid Razr using Tapatalk
"Device is locked" is natural, (almost) all of our bootloaders are locked. Nothing to do with flashing official ROMs.
You'll need to make a factory cable if the battery is low, search the development forum for a guide.
Sent from my XT910 using xda premium
Thank you all ... Just ordered the cable. Hope it works.
Appreciate all the help.
samthehell said:
Thank you all ... Just ordered the cable. Hope it works.
Appreciate all the help.
Click to expand...
Click to collapse
Here is where u can find full 2.3.6 Asian fastboot file, so you can use rsd for flashing 2.3.6 but for flashing 2.3.5 you have to use Alternative rsd because of bl version
http://forum.xda-developers.com/showthread.php?p=22821170
Sliced by my Razr on Tapatalk