Related
I have problem with my HTC HD2, it dosnt wont start. It normaly work until resert, then it dosnt wont start, i press buten but nothing, when i conect him with pc or power it turn on, and show htc logo and turn of. I try hard resert, but same situation, i go to Bootloader Mode and say serial
If anybody have any idea I would be very grateful
AND SORRY IN MY POOR ENGLISH
Your English is more than enough to tell us what the problem is. Shame my ability to converse in another language is non existant.
When you go into Bootloader Mode, what else does it say? If you plug the USB cable into the phone and computer, does the 'Serial' change to 'USB'?
What ROM and RADIO did it have on it?
Where you trying to flash a new ROM/RADIO/SPL to your phone?
When i conect phone to pc it only say SERIAL, dosnt wont to change to USB
I really dosnt now what ROM and RADIO did it have on it, becouse i use it one day and that hapend
I somewhare read to i must put orginal rom in it, but i cant find orginal rom for him, i try on htc web page, when i put my Serial Number, it say that i cont
dowload
You may have to plug your USB cable in the back of your computer or try another cable.
If a red LED coming on when you plug in the USB cable to the phone?
The phone may be ROM Locked - you are only allowed to download (from the HTC website) the phone operators version of the ROM. So if the phone is branded Vodafone, Orange, etc then you have to use your serial to download that version of the ROM.
i try 2 diferent usb cabel
red LED dosnt coming on
Its dont wont to chargh
DOsnt wont to start until i connect him with pc or some kind of power, then only start until htc logo and resert, when i go to Bootloader Mode its say serial, its pluged in pc, when i unpluged from pc its turn of
Can it be some kind harver problem or softver
You could always plug your phone into the mains charger, then plug in the battery. It sounds as though the battery is totally flat and the computer USB is not enough to charge it.
Hi there,
yesterday I tried to root my new Tablet Z (16GB, LTE, Model: SGP321, Firmware: 10.4.B.0.569) and it doesn't start since then.
I used an ubuntu live CD for all these tasks because fastboot doesn't work on my win 8.1 and my debian wheezy didn't have the libc-dev needed in its repositories (didn't want to mess with packets that weren't yet integrated into my OS).
What I did:
unlock the bootloader according to http://unlockbootloader.sonymobile.com/instructions
I followed the instructions here: http://forum.xda-developers.com/xperia-z/general/how-to-root-10-4-b-0-569-t2590781
a few annotations to this:
the firmware rar didn't include a "Recover.zip", so I used the boot.img directly inside the firmware rar
although sony and this CM tutorial use the "-i" parameter of fastboot, I didn't use it because it wasn't used by the tutorial
after I did the "fastboot reboot" step, the device wasn't listed anymore when typing "fastboot devices", which, I think, is okay since the device should restart then.
I think it didn't really restart, because the LED on the side glew red.
I tried to turn on the tablet but it didn't do anything (the LED kept glowing red).
I tried holding vol up and power for a few seconds (until the LED blinked first once and then three times) but the tablet wouldn't do anything except for the LED glowing red. at somepoint, the LED would turn off (I think that happened when I hold vol up and power for more than 10 sec).
I was able to let it glow red again by pressing vol up and power again and release the vol up button before the power button.
I also tried to use the PC companion on my windows machine to repair the tablet but the tablet wasn't even recognized (either using the fastboot-procedure by holding vol up while connecting the tablet nor normal plugging in...)
any ideas what I could do next?
Same Problem!
Hey wullxz!
I have the same problem. Red LED most of the time, and I cannot make ANY USB connection to the PC. The tablet won't show up in the device manager. So obviously cant use flashtool, nor PC companion. Ive tried all this volume up and down button stuff, but simply cannot get it to show up on the computer.. Tried a different USB cable as well.. Same issue. The USB port is definitely not broken. Its brand new..
Have you found any solution ? Or anyone else? Mine just got back from Sony Repair.. they wont fix it cuz they detected that Ive tampered with the original software.... meaning Warranty Lost!
Great!
hi,
i also sent mine to sony for a repair. i wrote that i did a firmware update and the tablet wouldn't boot afterwards.
i didn't try the bootloader-unlock again afterwards.
Help Needed!
Tablet Z with unlocked bootloader and rooted 10.1.C.0.370
My issues occured after a downgrade to 4.1.2.
I CAN:
1) Start my tablet, everything normal...
2) Charge my tablet
3) Go into safe mode
4) Go into fastboot mode (solid BLUE LED)
5) Use the memory card and use root apps (maybe this could help restore?)
I CAN NOT:
1) Get my PC to recognize that a USB device is connected. Neither in Mass Storage mode, Media mode, nor fastboot mode.
- Tried with several cables and computers (this is not a driver issue, since it won't show up at all in device manager)
- Flashtool obvious;y says, no device connected
2) Get in to flashmode: device blinks red for about half a second, then green for half a second, and then LED is off. Nothing recognized via USB on PC
3) Get into recovery mode
4) Update over WIFI (fails because unlocled bootloader I suppose)
Any help would be greatly appreciated!
i think you should open a new thread for your problem because it seems like it's not really similar to my issue.
you should get more/better replies in an own thread.
Oki
wullxz said:
i think you should open a new thread for your problem because it seems like it's not really similar to my issue.
you should get more/better replies in an own thread.
Click to expand...
Click to collapse
Oki thnx, will try that!
centinel_x said:
Tablet Z with unlocked bootloader and rooted 10.1.C.0.370
My issues occured after a downgrade to 4.1.2.
I CAN:
1) Start my tablet, everything normal...
2) Charge my tablet
3) Go into safe mode
4) Go into fastboot mode (solid BLUE LED)
5) Use the memory card and use root apps (maybe this could help restore?)
I CAN NOT:
1) Get my PC to recognize that a USB device is connected. Neither in Mass Storage mode, Media mode, nor fastboot mode.
- Tried with several cables and computers (this is not a driver issue, since it won't show up at all in device manager)
- Flashtool obvious;y says, no device connected
2) Get in to flashmode: device blinks red for about half a second, then green for half a second, and then LED is off. Nothing recognized via USB on PC
3) Get into recovery mode
4) Update over WIFI (fails because unlocled bootloader I suppose)
Any help would be greatly appreciated!
Click to expand...
Click to collapse
let it charge to 100%, check for flashmode drivers installed and then try attaching it to pc only when flashtool asks you to do it.
Rootk1t said:
let it charge to 100%, check for flashmode drivers installed and then try attaching it to pc only when flashtool asks you to do it.
Click to expand...
Click to collapse
Hey thanks for your reply... It wont go into flashmode... Theres something fundamentally wrong.. I cant figure out what... I leave it plugged in for 48 hours..but it doesnt really get full.. the most Ill get the orange LED.. like 50%... now its on since about 12 hours.. no LED on at all... strange..
But yea.. no flashmode... Nothing showing up when connecting the USB cable... nothing in device manager..and therefore flashtool sees nothing!
SOLVED
Problem solved! I can't believe it. Two bad(?) USB cables. Bought a new one, charges fine, flashmode fine. Flashed stock ROM.
However the Camera still doesn't work. Maybe the problem of the cable inside which may have come loose!
Hi all,
I am in desperate need of ya'llz help! Recently I followed the following instructions to the dot:
http://forum.xda-developers.com/showthread.php?t=2703774
in order to get root on 10.4.1.B.0.109. I ended up, like the author of the thread, in the so called bootloop. Tried everything and eventually managed to get out and restored to root 4.1.2. Thats where I am now.
The tablet works fine, however i am unable to connect to my pc with USB and also unable to charge via the charger. The tab is not detected in my computer, nor PC companion. Mass storage mode nor media mode work. I tried swapping cables, same.
The only thing I am able to get working through USB is charging when the tab is powered off, which means that the USB port is not broken.
I was thinking that updating would fix the problem, so I tried updating directly from the System update in the tab. It downloads 109, then restarts to install it, comes back with: "Could not install"!
Now my tab is not detected on my PC when its on, what to do ? How to update/Fix the USB problem!?
Any help is greatly appreciated!
Update
Ok I realized that the plugged cable only makes the red LED on the left light up, and when i click the power button, I see the battery picture in the display. Showing half charged. But the actual charge is not increasing.
Unplugging the USB, turns off the LED!
Help!
No ideas anyone? It charges from dead till medium. But no USB connection to the PC is possible! Cant update
centinel_x said:
No ideas anyone? It charges from dead till medium. But no USB connection to the PC is possible! Cant update
Click to expand...
Click to collapse
put your sd card in an adapter, put that in your pc and copy a zip with a full rom on it, put it back in your tablet and install the rom? Or try a different usb cable, maybe it's broken
centinel_x said:
No ideas anyone? It charges from dead till medium. But no USB connection to the PC is possible! Cant update
Click to expand...
Click to collapse
hold power + Vol+ to reset device and after that try to connect to pc to flash in flashtool.
Thanx
Hi guys,
thanks for the replies. Ive tried those already. Ive tried all different types of roms. The problem is that you need a restore image such as dual recovery on the tablet. Its rooted but there is not way to install a recovery image on it, without using a computer. And since it wont connect to the PC, no way..
:/
Hello guys,
I am having trouble with my Xperia Mini Pro phone. Yesterday it suddenly switched off and it is not switching on after that. When I connect it to my laptop, the red LED flashes indicating that its charging, however when I connect with Volume Down and Insert the USB for Fastboot mode, there is no blue light and Windows 10 shows error "USB Device not recognized". I reinstalled flashtool after that as I thought it was giving me problems yet the problem persists. What driver do I need for Xperia Mini Pro? Using 0.9.22.3 version of Flashtool. I have unlocked bootloader and I was using Pac Man Rom on it. Nothing else. Currently nothing is working on my phone, flashmode, fastboot mode, CWM etc nothing is working. Only the red LED blinks when I connect to PC or when I am charging.
Is this a soft brick? and how do I fix it? I only use Flashtool and not the companion software. Please guide me, using this phone for past couple of years and I want to use it for some more time.
Thank you.
Felix-Senpai said:
Hello guys,
I am having trouble with my Xperia Mini Pro phone. Yesterday it suddenly switched off and it is not switching on after that. When I connect it to my laptop, the red LED flashes indicating that its charging, however when I connect with Volume Down and Insert the USB for Fastboot mode, there is no blue light and Windows 10 shows error "USB Device not recognized". I reinstalled flashtool after that as I thought it was giving me problems yet the problem persists. What driver do I need for Xperia Mini Pro? Using 0.9.22.3 version of Flashtool. I have unlocked bootloader and I was using Pac Man Rom on it. Nothing else. Currently nothing is working on my phone, flashmode, fastboot mode, CWM etc nothing is working. Only the red LED blinks when I connect to PC or when I am charging.
Is this a soft brick? and how do I fix it? I only use Flashtool and not the companion software. Please guide me, using this phone for past couple of years and I want to use it for some more time.
Thank you.
Click to expand...
Click to collapse
Sounds like a battery problem. Try to use original charger (from a wall socket - at least 15min). A wall socket can deliver twice as much power as a USB port. So if your phone is charging slowly and you're connected to pc: there's your problem.
Shinoks said:
Sounds like a battery problem. Try to use original charger (from a wall socket - at least 15min). A wall socket can deliver twice as much power as a USB port. So if your phone is charging slowly and you're connected to pc: there's your problem.
Click to expand...
Click to collapse
Hello. I tried this and it didn't work. I have my phone charging for over an hour now and it still is not booting. My phone vibrates when booting and I don't get that vibration anymore
Any other help?
Any help regarding this? Still haven't been able to fix it
Hey, I got wiko ridge 4g that was bricked, it won't turn on but the light is blinking when battery is not full when i connect him on charger. I have connected the phone with PC via USB and he recognized him as 'qhsusb_bulk', i tried to unbricked it with SRK Tool 2.0, but i can't turn on usb debbuging and i don't know if the phone is rooted or not, but i did it anyway. So i managed to delete partitions with that program, but later the phone was recognized as Unknown USB Device. So my question is : is there any other way to brick the phone back, without phone being turned on, via PC ?
Thank you very much.
muki22 said:
Hey, I got wiko ridge 4g that was bricked, it won't turn on but the light is blinking when battery is not full when i connect him on charger. I have connected the phone with PC via USB and he recognized him as 'qhsusb_bulk', i tried to unbricked it with SRK Tool 2.0, but i can't turn on usb debbuging and i don't know if the phone is rooted or not, but i did it anyway. So i managed to delete partitions with that program, but later the phone was recognized as Unknown USB Device. So my question is : is there any other way to brick the phone back, without phone being turned on, via PC ?
Thank you very much.
Click to expand...
Click to collapse
Hm, nobody answered to this ,so i keep digging out on internet,and after some searching i use the qfil app, also i downloaded original stock rom for my wiko ridge 4g, through qfil i installed that rom , the pc in one point recognized my device as 4g ridge, but then just started to showing quallcomm hs-usb diagnostic mode 9092 when it connected to PC via USB. My phone show some signs ,screen was black but it vibrating, and a assume it's turned on when i press touch screen or volume changer button he reproducing sound, but on pc he is readed like quallcomm hs-usb diagnostic mode 9092! If somebody know how to fix that problem, please answer me!