I used qdl to upgrade my streak from 1.6 to 2.2. 2.2 but I often can't get out of "sleep mode". I press the power button and swipe the unlock and usually nothing happens (no buzz and no movement of the bar). Once I couldn't even power it down as holding the power button brough up the correct prompt but the screen was unresponsive. I had to remove the battery.
Is there some sort of resolution to this issue? My touch screen works fine once I've got the phone "awake".
Did you perform the OTA upgrade to v.318 of 2.2. after the QDL?
Forgive me but I'm not sure what you're asking but perhaps this will help you answer your question. I used the tutorial at this link:
streakdroid.com/?page_id=78
Waggle said:
Forgive me but I'm not sure what you're asking but perhaps this will help you answer your question. I used the tutorial at this link:
streakdroid.com/?page_id=78
Click to expand...
Click to collapse
OK.
The very last screen says success. From here you can upgrade to an official build, or one of the ROM's by DJ_Steve on Streakdroid.com.
If all you did was that tutorial, you are at build 308, which is unstable. You need to do the official upgrade to build 318, which is the upgrade you were waiting to do when you were waiting for Dell/AT&T when you were still on ver 1.6. You can now do that upgrade. Or you can continue on the the latest ROM upgrade courtesy of DJ_Steve.
From this page at streakdroid.com:
Using QDLTool will get you to a pre-release of v2.2. From here, you’ll want to upgrade to a newer release. The two options that people tend to choose from are to either go up to the official v2.2 ROM from Dell, or install DJ_Steve’s latest ROM.
Official ROM
If you want to go to the latest official ROM from Dell, simply set up your wifi connection, then go to http://mobileupdate.dell.com/PackageProductionLocations/Streak_318_12821_00.pkg in the browser on the phone. You should be able to download and run to install the update.
Click to expand...
Click to collapse
To install the 318 build which fixes bugs in the build that QDLTool installs:
connect to a wifi network if you can
download the update directly to your phone from the link above
open the notification bar and select the download complete notification
you will be prompted to install the update
This method preserves your accounts and settings.
Related
I have a T-Mobile Vibrant and my phone is not indicating that any OTA updates are available. I have unrooted my phone and removed the lagfix. is there a way to force the OTA to initiate?
You will receive the OTA directly on your phone by the end of this month.
If you want it immediately, you can do it manually through Kies Mini, ODIN, or flash a JI6 built ROM.
nearblack said:
If you want it immediately, you can do it manually through Kies Mini, ODIN, or flash a JI6 built ROM.
Click to expand...
Click to collapse
And what means all that? I dunno anything about phones
Then you are better off waiting for it, or doing some searches, reading about odin and kies, just do some research and then decide if you're comfortable with doing it yourself
The cake is a lie!
Search on Kies Mini, Samsung released a tool to do the upgrade for you.
falafelfro said:
I have a T-Mobile Vibrant and my phone is not indicating that any OTA updates are available. I have unrooted my phone and removed the lagfix. is there a way to force the OTA to initiate?
Click to expand...
Click to collapse
Better yet try this. Make sure you have a backup before you do this.
**DUMMY PROOF INSTRUCTIONS!**
If you already have launcher pro:
1) goto your homescreen.
2) menu key, add.
3) hit shortcuts and then activities.
4) scroll down to device management
5) select "com.wssyncmldm.wssAppDmUiMain" and hit ok
6) this will put a shortcut on your homescreen that will say device management with blue and red arrows.
7) open that shortcut up and hit software update.
if you don't have launcher pro or don't know what it is.
1) goto the market.
2) search "Launcher Pro" or "Federico Carnales"
3) look for a yellow icon with a house on it.
4) install that.
5) once installed hit your homekey. select launcherpro but don't select use as default until you fall in love with launcherpro ;]
6) then, follow the steps above
Credits to CONNNNNN : http://forum.xda-developers.com/showthread.php?t=810827
This is soooo annoying, does anyone here get this error on some websites while browsing using the default shipped Android 2.2 browser?
Andriod browser dialog box mesg:
"Data connectivity problem
The page contains too many server redirects."
Example: http://www.yelp.com just does not work for me.
I am not sure if this is only happening to build 315 Dell Streaks. I did read somewhere else that going to build 318 fixes it, but I'd like to know how to fix this on 315 without going to 318.
Thanks in advance!
me4tux said:
This is soooo annoying, does anyone here get this error on some websites while browsing using the default shipped Android 2.2 browser?
Andriod browser dialog box mesg:
"Data connectivity problem
The page contains too many server redirects."
Example: http://www.yelp.com just does not work for me.
I am not sure if this is only happening to build 315 Dell Streaks. I did read somewhere else that going to build 318 fixes it, but I'd like to know how to fix this on 315 without going to 318.
Thanks in advance!
Click to expand...
Click to collapse
I get the same thing on stock 2.2 I have yet to figure out what it means or how to fix it.
You don't even have to root your phone to install baseband 318. As long as you are on baseband 305, 309, or 315 you won't even have to connect it to your computer.
Download (here is a Dell page with the link) the 318 file with your phone or with your computer and copy to the root of your SD Card. Browse to it with a file browser (you can use Quick Office) and tap on it.
If it doesn't do anything (if it does you'll be taken through the upgrade process) then rename the file to update.pkg.
Turn your phone off. Press the power button to turn your phone on and as soon as the LEDs light up hold BOTH volume buttons down. The phone will go into recovery mode. Use the volume controls to highlight the choice to install update.pkg and then press the camera button to select it.
The 318 update will be installed and your phone will reboot.
I believe that the second method will wipe your settings, so you'll have to set up your accounts and re-install your apps. When I did this I did a factory reset first so that I was doing the equivalent of a fresh install.
That's it - no drivers to install, no cables to connect (unless you copy the file to your phone with the cable), and you are technically running a stock phone.
This will not work if you have installed a custom recovery, you need a stock recovery on your phone to use an update.pkg. So this is perfect for those who don't want to mod their phone. You won't be able to tell the difference except that the redirect bug is gone.
me4tux said:
This is soooo annoying, does anyone here get this error on some websites while browsing using the default shipped Android 2.2 browser?
Andriod browser dialog box mesg:
"Data connectivity problem
The page contains too many server redirects."
Click to expand...
Click to collapse
RussianSolja said:
I get the same thing on stock 2.2 I have yet to figure out what it means or how to fix it.
Click to expand...
Click to collapse
DELL released a fix for this problem months ago on http://en.community.dell.com/support-forums/mobile-devices/f/3824/t/19353639.aspx
Download this file http://mobileupdate.dell.com/PackageProductionLocations/Streak_318_12821_00.pkg from the Streak's web browser, and then follow the instructions to apply the update.
I tried both ways listed here, unable to update.
Norick Lim said:
I tried both ways listed here, unable to update.
Click to expand...
Click to collapse
Can you be more specific as to what happen when you try to upgrade? I just did the upgrade last night and did encounter a few problem myself but I got it done at the end so maybe I can be of help if you can be a little more specific about the problem.
Btw I'm on stock 318 update from above link and server re direct problem is gone
Worked like a charm, Thank you. All I did was download the file from my phone, then when it finished downloading I clicked on it from the notification bar and a menu poped up asking me to update and so I did. Now I no longer have that error poping up.
Sent from the phone killer of ALL phone's, Dell Streak!
eresse,pecisni
i am also facing the same issue
I have a T-mobile G2 Touch(HTC Hero). I've recently started using it again and it seems like it needs a firmware update. Many cool apps like WhatsApp require firmware 2.1 and above.
I was never sent an OTA update and its too late to complain about that. I've seen posts dating back to 2010 talking about upgrading from 1.5 to 2.1 and they are confusing to say the least.
How hard can it be 2 years on?
Why hasn't HTC made firmware updates fool proof by now?
Can someone please assist me in figuring this out.
I can't believe upgrading a phone's firmware can take so much outta someone.
Help!!!!
First try to go to Settings -> About Phone (don't know what it's called, but it is the buttom one) -> If there is anything mentioning Software-update or alike you should go there and search for an update.
If not you should connect to WiFi and try to change the time a month or so forward. Then it should pop up with a update-notification and you can press download. That's at least how it works for me (WWE)
I've tried this, there isn't a software update or any option to search for updates.
It must be in "About" of Settings. Are you sure you've checked out all the options?
Does your carrier have a support page that links the update file? It should be a stand alone exe file that runs and takes care of the update.
Sent from my HTC Hero using Tapatalk
On official site:
Checking for phone software updates manually
From the Home screen, press MENU, and then tap Settings.
Scroll down the screen, and then tap About phone > System software updates.
On the System software updates screen, tap Check now.
Click to expand...
Click to collapse
I think maybe you should wait and try as mljjlm suggested to you, changing the date. You can try to setting date as 07/30/2010 or 07/30/2011 and waith some hours for OTA...
A while back when 2.1 came out, the update never came OTA even when I forced to check for updates, but I fixed that by changing my clock from 2010 I think to 2011 , restarted the phone and I was able to update to 2.1 and after that I changed the clock back to 2010. You can try to set your clock to 2013 and then the update will come
i had the same problem before i rooted. the only way i could trigger the update check was for me to do a factory reset on the phone. or you could just root it!
I have the same phone!!!Here in forum have detailed tuts how to made it but i will give you one quick:
Read this tread http://forum.xda-developers.com/showthread.php?t=1471460
and do all things!
After that get:
- "ROM Manager"
- "SuperSU"
from Google Play.
Install it and after that install from "ROM Manager" Clock Mod Recovery or AmonRA"
After that go here: http://forum.xda-developers.com/forumdisplay.php?f=512 and choice some ROM( i suggest
[ROM] SHPONGLE v3 - Former BEAST that develop 1cebox
Add choice ROM to SD cards and power off phone
After that hold "Home" and "POWER" buttons to get into Recovery mod and from that will have option to install new roms
I wait my Thanks for this info :laugh:
Have a nice day ;]
blade_h said:
I have the same phone!!!Here in forum have detailed tuts how to made it but i will give you one quick:
Read this tread http://forum.xda-developers.com/showthread.php?t=1471460
and do all things!
After that get:
- "ROM Manager"
- "SuperSU"
from Google Play.
Install it and after that install from "ROM Manager" Clock Mod Recovery or AmonRA"
After that go here: http://forum.xda-developers.com/forumdisplay.php?f=512 and choice some ROM( i suggest
[ROM] SHPONGLE v3 - Former BEAST that develop 1cebox
Add choice ROM to SD cards and power off phone
After that hold "Home" and "POWER" buttons to get into Recovery mod and from that will have option to install new roms
I wait my Thanks for this info :laugh:
Have a nice day ;]
Click to expand...
Click to collapse
For that my mobile version is 1.5 how can i download" ROM Manager & SuperSU from Google play. Check the title "How can I upgrade HTC Hero/T-Mobile G2 Touch from firmware 1.5 to 2.1" please tell me any other way to handle am in the mid off that . up to this area i finished.
how to proceed next ..Please help me ..
By:
http://tn72.in
Major problem
Hi Guys..
I dont get the proper apps from play unfortunately i tried to install the SHPONGLE v3 - Former BEAST from the following steps
1) Power off your phone, remove and replace your battery and press and hold the Home button while pressing Power.
2) Your phone will load into Clockworkmod Recovery.
3) Select " install zip from sdcard ", then " choose zip from sdcard ". Select " SHPONGLE v3 - Former BEAST". and install Press Back, Back and " reboot system now ".
Now in my mobile Screen i can see X with some cool colors like loading animation but nothing can move next can not able to use my phone any one help me what can i do ..
simply i can see that page only..... can not able to use my phone (HTC Hero/T-Mobile G2 Touch )any more.. can not able to revert back any one help me
by
damuk said:
Hi Guys..
I dont get the proper apps from play unfortunately i tried to install the SHPONGLE v3 - Former BEAST from the following steps
1) Power off your phone, remove and replace your battery and press and hold the Home button while pressing Power.
2) Your phone will load into Clockworkmod Recovery.
3) Select " install zip from sdcard ", then " choose zip from sdcard ". Select " SHPONGLE v3 - Former BEAST". and install Press Back, Back and " reboot system now ".
Now in my mobile Screen i can see X with some cool colors like loading animation but nothing can move next can not able to use my phone any one help me what can i do ..
simply i can see that page only..... can not able to use my phone (HTC Hero/T-Mobile G2 Touch )any more.. can not able to revert back any one help me
by
Click to expand...
Click to collapse
Can you get into custom recovery and mount usb drive to pc? because if you can then you can flash this: Stock 2.1
Caution! This Will Erase All Data (Not SD Card) AND REMOVES ROOT + CUSTOM RECOVERY
If you choose to flash this then you will need to re-root and re-flash custom recovery to flash a new rom
HELP VIDEO FOR ANDROID NEWBIES TO HELP THEM CHANGE ROM FROM 2.2 TO 2.3 CM7
http://www.youtube.com/watch?v=RULPBh4cDYU
On demand of some of the very new to android users, im posting a relatively easy to understood upgrade process from 2.2 froyo to 2.3 cm7(custom rom).
http://www.youtube.com/watch?v=MfnoUB8EFOI VIDEO LINK TO THE CM7 ROM DEMO
Remember both these roms(cm7 and miui) are rooted roms.It voids the warranty.
All credits given to the respective developers of the softwares/firmwares shown in this thread.Im just here to make the process more easy to understand.As developers say, DO IT ON YOUR OWN RISK
CM7 FLASHABLE FILE- http://www.mediafire.com/?f90c9utsp8luknd
GOOGLEAPPS PACKAGE- http://goo-inside.me/gapps/gapps-gb-20110828-signed.zip
COPY BOTH THESE FILES ON TO UR SDCARD(SAME FOLDER OR SEPERATE FOLDERS) BEFORE U PROCEED ANY FURTHER!
Download this file CLOCKWORK MOD- http://www.mediafire.com/?4mio3rwhhmjw5aq
steps to load cwm recovery
1-Load dell drivers on ur pc which we call adb drivers which i found on my dell mem card folder named ADB_Tethering_Driver.U will find these drivers on this forum also if you dont have it in.
2-setuo fastboot mode on your dell handset
Setting up fastboot:
Turn Device off
Move ringer to UP position
Hold down Power and Volume Down
This will show fastboot mode is on.
3-Download and install cwm
How to Install CWM?
Start recovery.exe and Extract all files
U will see file named Install CWM.bat.
Run that file and now plug ur dell venue to usb cable(venue is still in fastboot mode as we did it before)
Follow instructions on the dos screen to make ur dell venue load cwm recovery.
Your DELL Venue will reboot after installation is finished
4-Then you can see DELL logo after reboot.
Immediate you press Volume UP+DOWN
5-Once you're in the CWM recovery before you flash the ROM zip, you need to :
a. Wipe data/Factory Reset
b. Wipe Cache Partition
c. Wipe Dalvik Cache
Use vul + - key to toggle the menu and go to INSTALL UPDATE option in that menu.Again on next screen u will be asked to choose update file selection.Option name i forgot may be "INSTALL UPDATE FROM SDCARD".
Select the CM7 file which you downloaded earlier and copied to sdcard.Select and click CAMERA button to start installation.It will take about a minute or two to complete installation.
5-As installation finishes, you will see the msg - UPDATE COMPLETED.Then u need to go back to the previous menu and select REBOOT SYSTEM NOW.Finish that step.
Thats done!You are into the world of smoother, faster , interactive dell venue cm7 2.3 rom!
You wont be able to cnnect to any of google applications at this time.
To enable google account and apps, u need to follow all the earlier steps and again go into the cwm recovery mode and install the GAAP packge which u have downloaded with cm7.The process will be same...update from sdcard,select gaap file and reboot.It should not be a big deal.
option2:Also u can go to cm7 settings menu and find option to boot into cwm recovery in dell phone itself(no need of pc to run cwm).However u need the GOOGLEAPPS FLASHABLE file on ur sdcard to flash it in cwm recovery in any case...option1 or option2.
Same process needs to be followed to install another update for ussd/mmi codes.
Download this package http://mirror2.streakdroid.com/manii/misc/USSD Fix/update-USSDfix-2.zip and flash it in same way as gapps was done.This would solve ur problem of ussd codes( * # kind of calls) as well.
NOTES:
ONE MAY FACE REDUCED BATTERY BACKUP IN THIS CM7 ROM,
I HAVE FOUND A WAY FOR IT, BY USING SETCPU application WHICH COMES IN THIS ROM AS BUNDLED.
MY SETCPU SETTINGS ARE:
1-START ON BOOT CHECKED
2-PROFILES ENABLED CHECKED. TWO PROFILES ADDED FIRST IS "SCREEN OFF" SET TO "POWERSAVE" AND SECOND PROFILE "IN CALL" SET TO "CONSERVATIVE"
*IF U GET STUCK AT BOOT AFTER INSTALLING ZIP OF CM7 FILE FROM CWM, U SHUD SIMPLE FOLLOW 2 STEPS. DO AL DATA WIPE,CACHE WIPE AND DATA RESET.THEN FLASH CM7 AGAIN WITHOUT RESTARTING PHN.THIS WILL SOLVE BOOT LOOPING PROBLEM IF ARISES.
THESE SETTINGS GIVE ME EXTRA BATTERY BACKUP OF ABT 3/4HOURS.
hirentherock555 said:
On demand of some of the very new to android users, im posting a relatively easy to understood upgrade process from 2.2 froyo to 2.3 cm7(custom rom).
Remember both these roms(cm7 and miui) are rooted roms.It voids the warranty.
All credits given to the respective developers of the softwares/firmwares shown in this thread.Im just here to make the process more easy to understand.As developers say, DO IT ON YOUR OWN RISK
CM7 FLASHABLE FILE- http://www.mediafire.com/?f90c9utsp8luknd
GOOGLEAPPS PACKAGE- http://goo-inside.me/gapps/gapps-gb-20110828-signed.zip
COPY BOTH THESE FILES ON TO UR SDCARD(SAME FOLDER OR SEPERATE FOLDERS) BEFORE U PROCEED ANY FURTHER!
steps to load cwm recovery
1-Load dell drivers which we call adb drivers which i found on my dell mem card folder named ADB_Tethering_Driver.U will find these drivers on this forum also if you dont have it in.
2-setuo fastboot mode on your dell handset
Setting up fastboot:
Turn Device off
Move ringer to UP position
Hold down Power and Volume Down
This will show fastboot mode is on.
3-Download and install cwm
How to Install CWM?
Download this file - http://www.mediafire.com/?4mio3rwhhmjw5aq
Start recovery.exe and Extract all files
U will see file named Install CWM.bat.
Run that file and now plug ur dell venue to usb cable(venue is still in fastboot mode as we did it before)
Follow instructions on the dos screen to make ur dell venue load cwm recovery.
Your DELL Venue will reboot after install finished
4-Then you can see DELL logo
Immediate you press Volume UP+DOWN
5-Once you're in the CWM recovery before you flash the ROM zip, you need to :
a. Wipe data/Factory Reset)
b. Wipe Cache Partition
c. Wipe Dalvik Cache
Use vul + - key to toggle the menu and go to INSTALL UPDATE option in that menu.Again on next screen u will be asked to choose update file selection.Option name i forgot may be "INSTALL UPDATE FROM SDCARD".
Select the CM7 file which you downloaded earlier and copied to sdcard.Select and click CAMERA botton to start installation.It will take about a minute or two to complete installation.
5-As installation finishes, you will see the msg - UPDATE COMPLETED.Then u need to go back to the previous menu and select REBOOT SYSTEM NOW.Finish that step.
Thats done!You are into the world of smoother, faster , interactive world of dell venue cm7 2.3 firmware!
You wont be able to cnnect to any of google applications at this time.
To enable google account and apps, u need to follow all the earlier steps and again go into the cwm recovery mode and install the GAAP packge which u have downloaded with cm7.The process will be same...update from sdcard,select gaap file and reboot.It should not be a big deal.
Click to expand...
Click to collapse
Thanks
Super cool and simple explaination quite helpful. Will try this.
But are there any bugs in this update?
Also if possible is there any rollback method if we get stuck or mobile bricks?
I did not find any bugs in cm7 as yet...havent tried miui rom yet.
CM7 is supercool rom.You would love it.Its 10times better than the 2.2 inbuilt rom dell give.
Rollback would require stockroms(which r available on his forum i think).
Unbricking method post is also given in this forum.Check and do the diligence at ur own risk.
hirentherock555 said:
I did not find any bugs in cm7 as yet...havent tried miui rom yet.
CM7 is supercool rom.You would love it.Its 10times better than the 2.2 inbuilt rom dell give.
Rollback would require stockroms(which r available on his forum i think).
Unbricking method post is also given in this forum.Check and do the diligence at ur own risk.
Click to expand...
Click to collapse
Worked as said
Thanks a ton mate
Also just trouble was needed to download google apps which was never done by me ever
Asphalt 6 HD roxs now
Fantastic!
So atlast u installed google apps rom also na?After flashing with cm7?
Tell me how is camera performance in ur dell device?
On gsmarena i saw many people praising the camera but i found it really awefully bad!
Wondering oif cam in bad in my handset only?
hirentherock555 said:
Fantastic!
So atlast u installed google apps rom also na?After flashing with cm7?
Tell me how is camera performance in ur dell device?
On gsmarena i saw many people praising the camera but i found it really awefully bad!
Wondering oif cam in bad in my handset only?
Click to expand...
Click to collapse
Yes flashed with google apps zip
Camera is good to very good 8 MP
HD video also is good
i have updated the step by step process with additional mmi code solution also into the last paragraph.U can check it.
I dnt knw why, my cam is giving bad results with backcover on and better result when i take cover off.Can u check in ur cam result of both ways? and let me knw?
hirentherock555 said:
i have updated the step by step process with additional mmi code solution also into the last paragraph.U can check it.
I dnt knw why, my cam is giving bad results with backcover on and better result when i take cover off.Can u check in ur cam result of both ways? and let me knw?
Click to expand...
Click to collapse
Sure
Guess you must try cleaning the cover lence once
Still will update you on the same
hirentherock555 said:
Fantastic!
So atlast u installed google apps rom also na?After flashing with cm7?
Tell me how is camera performance in ur dell device?
On gsmarena i saw many people praising the camera but i found it really awefully bad!
Wondering oif cam in bad in my handset only?
Click to expand...
Click to collapse
took it to test today
used it as normal as i always do
but battery drain observed was high than stock
half a day by 3 noon my fone waz 20 %
unplugged at 7am
on stock at this time i would be 60 %
just use opera and whatsapp
any suggestions?
will clearing battery stats help?
heard it makes things worst
here are some suggestions:
1: in stock rom when wifi is on and connected to a router, and u went away from in wifi area, it will stop searching for wifi.When u will enter in same wifi zone again, u wont get auto connected to wifi.
Whereas in cm7, after leaving wifi area with wifi on(and connected), upon returning to wifi area again, u will find venue connected to that wifi network automatically.
This means wifi is continuously looking for connection in cm7 but not in stock rom.Make appropriate changes to try and enhance battery life.
2:SETCPu application
Use this application to save battery.I used it today and felt the difference.
3:Set brightness levels to zero rather than auto.
We have to change our habits of using phones to save battery.Thats a hard fact!
Above all should help though.
hirentherock555 said:
here are some suggestions:
1: in stock rom when wifi is on and connected to a router, and u went away from in wifi area, it will stop searching for wifi.When u will enter in same wifi zone again, u wont get auto connected to wifi.
Whereas in cm7, after leaving wifi area with wifi on(and connected), upon returning to wifi area again, u will find venue connected to that wifi network automatically.
This means wifi is continuously looking for connection in cm7 but not in stock rom.Make appropriate changes to try and enhance battery life.
Click to expand...
Click to collapse
I am not using wif fi
I am on 2G EDGE mate
2:SETCPu application
Use this application to save battery.I used it today and felt the difference.
Click to expand...
Click to collapse
Any suggested settings?
3:Set brightness levels to zero rather than auto.
We have to change our habits of using phones to save battery.Thats a hard fact!
Click to expand...
Click to collapse
Thats not an issue done that
1ST CLICK ON SETCPU - RUN ON BOOT CHECK
GO TO PROFILES AND ADD 2 PROFILES
1ST SELECT "SCREEN OFF" AND SELECTOR SCALLING "POWERSAVE"
2ND SELECT "IN CALL" AND SELECT SCALLING "CONSERVATIVE"
iM USING THESE SETTINGS TODAY.
cELL FULLY CHARGED AND DISCONNECTED POWER AT 8.30AM MORNING.
iTS 5PM NOW AND BATTERY LEFT IS STILL56%
i HAVE WIFI ALWAYS ON AS I HAVE ROUTER AT HOME.
i HAVENT USED MUCH OF INTERNET THOUGH.
AS PER BATTERY USE MENU TLL NOW FROM MORNING,
DISPLAY IS USED FOR 1.3HRS.
VOICE CALL DATA SHOWS 52MINUTES
WIFI USED FOR 8.30 HOURS AS WELL.
i THINK ITS DECENT BATTERY BACKUP IF I KEEP THESE SETTINGS.
YES PERFORMANCE SEEMS TO BE SLIGHTLY LESS WITH SETCPU.ABT 10-15% LAG IN PERFORMANCE.BUTS I WILL TAKE THAT.
hirentherock555 said:
1ST CLICK ON SETCPU - RUN ON BOOT CHECK
GO TO PROFILES AND ADD 2 PROFILES
1ST SELECT "SCREEN OFF" AND SELECTOR SCALLING "POWERSAVE"
2ND SELECT "IN CALL" AND SELECT SCALLING "CONSERVATIVE"
iM USING THESE SETTINGS TODAY.
cELL FULLY CHARGED AND DISCONNECTED POWER AT 8.30AM MORNING.
iTS 5PM NOW AND BATTERY LEFT IS STILL56%
i HAVE WIFI ALWAYS ON AS I HAVE ROUTER AT HOME.
i HAVENT USED MUCH OF INTERNET THOUGH.
AS PER BATTERY USE MENU TLL NOW FROM MORNING,
DISPLAY IS USED FOR 1.3HRS.
VOICE CALL DATA SHOWS 52MINUTES
WIFI USED FOR 8.30 HOURS AS WELL.
i THINK ITS DECENT BATTERY BACKUP IF I KEEP THESE SETTINGS.
YES PERFORMANCE SEEMS TO BE SLIGHTLY LESS WITH SETCPU.ABT 10-15% LAG IN PERFORMANCE.BUTS I WILL TAKE THAT.
Click to expand...
Click to collapse
Thanks will try that
Also wanted to know can we flash dell stage UI 1.6 in this rom?
It is there here somewhere but I dont know as havnt tried
No idea abt stage ui as i really didnt like it and neither want it.
U amy try searching forum for tht.
Google Apps with audio/video ability
Gapps with gtalk audio/video ability
http://goo.im/gapps/gapps-gb-20110828-newtalk-signed.zip
Has anyone tried the above?
havent trid.also the link u shown there does not work.
Try uploading on medafire.
It would be great if all users here can press SUBMIT THREAD button on top of the page so that this thread can feature on xda home page and people get to know about it.
talk2 (the one with video chat) wont fully work on the V because it has no FFC.
It might otherwise work to recieve video/voice though, but it cant send video.
TheManii said:
talk2 (the one with video chat) wont fully work on the V because it has no FFC.
It might otherwise work to recieve video/voice though, but it cant send video.
Click to expand...
Click to collapse
Wont the back camera work for this?
just curious
Did the setcpu settings help u?
hirentherock555 said:
Did the setcpu settings help u?
Click to expand...
Click to collapse
Was on your settings before I re formatted my cell.
Was going okish..
But when I reformatted it, made sure the battery was full and then wiped battery stats.
Now I am onn without setcpu, goes for 10 to 13 hrs max with few calls, whatsapp always on, mails, etc.
Will go on with this for a month. Then check with setcpu if it gives any difference.
Hello,
I recently flashed Winsuk's CM9 to my Aria, which had been running CM7 without a hitch for months, and I've been having the common problem of bootloops at the HTC screen when trying to install any of these gapps ICS packages. This forum (in which I'm not allowed to post) suggested updating to the HTC Froyo RUU firmware from here and then re-installing CM9 and gapps. This seems to have worked for the posters here. I however have been unable to get my phone, currently running Winsuk's CM9, to prompt me to connect to HTC Sync when I connect the USB to try and do the HTC official Froyo update. I'll try going back to CM7 and trying again. Does anyone have experience with installing official updates when running a custom ROM? The user who successfully did it was dust906. Any tips much appreciated.
fourth1 said:
Hello,
I recently flashed Winsuk's CM9 to my Aria, which had been running CM7 without a hitch for months, and I've been having the common problem of bootloops at the HTC screen when trying to install any of these gapps ICS packages. This forum (in which I'm not allowed to post) suggested updating to the HTC Froyo RUU firmware from here and then re-installing CM9 and gapps. This seems to have worked for the posters here. I however have been unable to get my phone, currently running Winsuk's CM9, to prompt me to connect to HTC Sync when I connect the USB to try and do the HTC official Froyo update. I'll try going back to CM7 and trying again. Does anyone have experience with installing official updates when running a custom ROM? The user who successfully did it was dust906. Any tips much appreciated.
Click to expand...
Click to collapse
Put your phone in FASTBOOT mode. (While USB cable is disconnected, turn phone completely off, then hold trackball button while pressing power button. After it comes back up and says FASTBOOT on the screen, let go of trackball button and plug USB cable back in.) It doesn't matter what ROM you have installed, your computer should be able to detect the phone while the phone is at the FASTBOOT screen and start the official Froyo update process.
Want to install Google Chrome Browser on HTC Aria with CM9 ICS
Hello all,
Today only I have updated my HTC Aria phone with Munjeni's ICS ROM and the gapps. The phone is working great. I thank him for his efforts. However, for one of my experiments, I wanted to install Google Chrome Browser, which is compatible for Android 4.0 and onwards. My basic aim is to check webaudio apis which is working fine in Google Chrome Browser Desktop version 19.0.xxxx. But the same are not working on the existing browser on this android 4.0.4. So I wanted to download Google Chrome Browser for Android Beta on this CM9 image. The android Market (Play Store) says, my phone is not compatible for this Browser application.
Any clue on this subject from the experts?
Thanks
Google Chrome requires an ARMv7 or better CPU, which the Aria unfortunately does not have.