###QDLTool: M 2.7.4.8, build ID: 1.301.20101022, time stamp: Mon Feb 21 10:21:48 2011
Check image DBL: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\dbl.mbn ...
Check image FSBL: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\fsbl.mbn ...
Check image OSBL: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\osbl.mbn ...
Check image AMSS: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\amss.mbn ...
Check image DSP1: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\dsp1.mbn ...
Check image APPSBL: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\appsboot.mbn ...
Check image DT: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\DT.img ...
Check image boot.img: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\boot.img ...
Check image system.img: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\system.img ...
Check image userdata.img: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\userdata.img ...
Check image recovery.img: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\recovery.img ...
Check image logfilter.img: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\logfilter.img ...
Check image Region: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\RC_us.img ...
Check images: Partition Dbl Fsbl Osbl Amss Dsp1 DT Appsbl Boot System Userdata Recovery LogFilter RCFile
Check images ok
Download in speedup way
Open COM port success
OSBL version: 12-5035-AUSB1AM-09
osbl.mbn version:
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Open COM port success
Check Secure Boot is enabled
#Set Fast Boot Flag success
Open COM port success
Test communication success
Check Secure Boot is enabled
#DBL to DDR success
#FSBL to DDR success
#OSBL to DDR success
#DT to DDR success
#backup FSBL to DDR success
Run HEX success
Check Secure Boot is enabled
Streaming hello success
Send Security mode success
Download partition table success
#Download DBL success
#Download FSBL success
#Download OSBL success
#Download DT success
#Download backup FSBL success
Erase EFS2 success
Wait for rebooting ....... ok
Wait for modem set up ......
Wait for ADB device .........
ERROR[D2]: wait ADB fastboot mode timeout!
Please check that device is exist and driver is properly installed.
Download Fail! - 2011/02/21 10:22:35
Elapsed Time: 47.11 sec
to me it looks like code that escaped from Tron Legacy
theskipshow said:
###QDLTool: M 2.7.4.8, build ID: 1.301.20101022, time stamp: Mon Feb 21 10:21:48 2011
Check image DBL: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\dbl.mbn ...
Check image FSBL: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\fsbl.mbn ...
Check image OSBL: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\osbl.mbn ...
Check image AMSS: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\amss.mbn ...
Check image DSP1: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\dsp1.mbn ...
Check image APPSBL: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\appsboot.mbn ...
Check image DT: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\DT.img ...
Check image boot.img: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\boot.img ...
Check image system.img: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\system.img ...
Check image userdata.img: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\userdata.img ...
Check image recovery.img: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\recovery.img ...
Check image logfilter.img: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\logfilter.img ...
Check image Region: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\RC_us.img ...
Check images: Partition Dbl Fsbl Osbl Amss Dsp1 DT Appsbl Boot System Userdata Recovery LogFilter RCFile
Check images ok
Download in speedup way
Open COM port success
OSBL version: 12-5035-AUSB1AM-09
osbl.mbn version:
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Open COM port success
Check Secure Boot is enabled
#Set Fast Boot Flag success
Open COM port success
Test communication success
Check Secure Boot is enabled
#DBL to DDR success
#FSBL to DDR success
#OSBL to DDR success
#DT to DDR success
#backup FSBL to DDR success
Run HEX success
Check Secure Boot is enabled
Streaming hello success
Send Security mode success
Download partition table success
#Download DBL success
#Download FSBL success
#Download OSBL success
#Download DT success
#Download backup FSBL success
Erase EFS2 success
Wait for rebooting ....... ok
Wait for modem set up ......
Wait for ADB device .........
ERROR[D2]: wait ADB fastboot mode timeout!
Please check that device is exist and driver is properly installed.
Download Fail! - 2011/02/21 10:22:35
Elapsed Time: 47.11 sec
Click to expand...
Click to collapse
What is showing on your streak when this errors in the QDL tool.....is it a whitescreen?
Code:
[COLOR=Red]ERROR[D2]: wait ADB fastboot mode timeout!
Please check that device is exist and driver is properly installed.[/COLOR]
This means you do not have the proper ADB driver installed.. its all done but need the adb drivers to restart your streak into fastboot mode.
Also you need to install the Fastboot driver. put your device in fastboot mode (power off, then hold camera button while powering on then press the top when you get to a whit screen with a keypad). Plug in to your PC and the driver is in the repairtool folder you extracted.
so what if its stuck on the dell screen ? and it just keep restarting what does that mean?
fone_fanatic said:
Code:
[COLOR=Red]ERROR[D2]: wait ADB fastboot mode timeout!
Please check that device is exist and driver is properly installed.[/COLOR]
This means you do not have the proper ADB driver installed.. its all done but need the adb drivers to restart your streak into fastboot mode.
Also you need to install the Fastboot driver. put your device in fastboot mode (power off, then hold camera button while powering on then press the top when you get to a whit screen with a keypad). Plug in to your PC and the driver is in the repairtool folder you extracted.
Click to expand...
Click to collapse
ive done everything but it gives me the same message
go here ftp://ftp.dell.com/Handheld/R288920.exe and download the adb drivers. Once installed try to run qdl tool. If you get this same error again, no problem, just go to device manager in windows and go to the exclamation point where it says adb device or dell streak or some kind of hardware ( should be the only exclamation point on your device manager). right click and choose update drivers and have windows search automatically. Windows will indeed find your adb drivers and then your qdl tool will work,. This exact thing happened to me. it has something to do with what version of microsoft .net framework you have based on what os you are running.
Related
QDLTool: M 2.7.4.8, Build ID: 1.301.20101022, SW: 12-5035-AUSB1AM-09
Report:
HW:
Board ID:
Comment:
--
LOG
--
###QDLTool: M 2.7.4.8, build ID: 1.301.20101022, time stamp: Sat Jan 22 19:15:11 2011
Check image DBL: C:\Streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\dbl.mbn ...
Check image FSBL: C:\Streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\fsbl.mbn ...
Check image OSBL: C:\Streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\osbl.mbn ...
Check image AMSS: C:\Streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\amss.mbn ...
Check image DSP1: C:\Streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\dsp1.mbn ...
Check image APPSBL: C:\Streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\appsboot.mbn ...
Check image DT: C:\Streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\DT.img ...
Check image boot.img: C:\Streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\boot.img ...
Check image system.img: C:\Streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\system.img ...
Check image userdata.img: C:\Streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\userdata.img ...
Check image recovery.img: C:\Streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\recovery.img ...
Check image logfilter.img: C:\Streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\logfilter.img ...
Check image Region: C:\Streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\RC_us.img ...
Check images: Partition Dbl Fsbl Osbl Amss Dsp1 DT Appsbl Boot System Userdata Recovery LogFilter RCFile
Check images ok
Download in speedup way
Open COM port success
OSBL version: 12-5035-AUSB1AM-09
osbl.mbn version:
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Open COM port success
Check Secure Boot is enabled
#Set Fast Boot Flag success
Open COM port success
Test communication success
Check Secure Boot is enabled
#DBL to DDR success
#FSBL to DDR success
#OSBL to DDR success
#DT to DDR success
#backup FSBL to DDR success
Run HEX success
Check Secure Boot is enabled
Streaming hello success
Send Security mode success
Download partition table success
#Download DBL success
#Download FSBL success
#Download OSBL success
#Download DT success
#Download backup FSBL success
Erase EFS2 success
Wait for rebooting ....... ok
Wait for modem set up ......
Wait for ADB device .........
ERROR[D2]: wait ADB fastboot mode timeout!
Please check that device is exist and driver is properly installed.
Download Fail! - 2011/01/22 19:15:52
Elapsed Time: 40.56 sec
Any ideas? I did this process way to many times (this is because i tried to update to 1.6.1 from 1.6.0 and i got to many error messages..
and yes i am using ADB r288920
i was getting the same issues yesterday, flash 1.5.1 again, and make a factoty reset using clockwork then boot in recovery mode and make a factory reset agaion using the dell recovery option 1. and your phone should boot again, once booted u can flash 1.6.0 and 1.6.1.
Make sure you have the right driver installed, I was having the same issue. Head over to the streaksmart forums, there is a thread about QDL. I belive the 2nd or 3rd reply has the steps to fix the issue.
Sent from my Dell Streak using XDA App
###QDLTool: M 2.7.4.8, build ID: 1.301.20101022, time stamp: Mon Feb 21 10:21:48 2011
Check image DBL: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\dbl.mbn ...
Check image FSBL: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\fsbl.mbn ...
Check image OSBL: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\osbl.mbn ...
Check image AMSS: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\amss.mbn ...
Check image DSP1: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\dsp1.mbn ...
Check image APPSBL: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\appsboot.mbn ...
Check image DT: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\DT.img ...
Check image boot.img: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\boot.img ...
Check image system.img: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\system.img ...
Check image userdata.img: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\userdata.img ...
Check image recovery.img: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\recovery.img ...
Check image logfilter.img: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\logfilter.img ...
Check image Region: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\RC_us.img ...
Check images: Partition Dbl Fsbl Osbl Amss Dsp1 DT Appsbl Boot System Userdata Recovery LogFilter RCFile
Check images ok
Download in speedup way
Open COM port success
OSBL version: 12-5035-AUSB1AM-09
osbl.mbn version:
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Open COM port success
Check Secure Boot is enabled
#Set Fast Boot Flag success
Open COM port success
Test communication success
Check Secure Boot is enabled
#DBL to DDR success
#FSBL to DDR success
#OSBL to DDR success
#DT to DDR success
#backup FSBL to DDR success
Run HEX success
Check Secure Boot is enabled
Streaming hello success
Send Security mode success
Download partition table success
#Download DBL success
#Download FSBL success
#Download OSBL success
#Download DT success
#Download backup FSBL success
Erase EFS2 success
Wait for rebooting ....... ok
Wait for modem set up ......
Wait for ADB device .........
ERROR[D2]: wait ADB fastboot mode timeout!
Please check that device is exist and driver is properly installed.
Download Fail! - 2011/02/21 10:22:35
Elapsed Time: 47.11 sec
My dell streak doesn't go past dell logo
"Recovery mode", by holding "Vol up, down and power" at the same time not working.
Fastboot not working as well. just power boton and dell logo stays on.
help me please!!!
QDLTool
Check image DBL: C:\streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\dbl.mbn ...
Check image FSBL: C:\streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\fsbl.mbn ...
Check image OSBL: C:\streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\osbl.mbn ...
Check image AMSS: C:\streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\amss.mbn ...
Check image DSP1: C:\streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\dsp1.mbn ...
Check image APPSBL: C:\streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\appsboot.mbn ...
Check image DT: C:\streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\DT.img ...
Check image boot.img: C:\streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\boot.img ...
Check image system.img: C:\streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\system.img ...
Check image userdata.img: C:\streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\userdata.img ...
Check image recovery.img: C:\streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\recovery.img ...
Check image logfilter.img: C:\streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\logfilter.img ...
Check image Region: C:\streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\RC_us.img ...
Check images: Partition Dbl Fsbl Osbl Amss Dsp1 DT Appsbl Boot System Userdata Recovery LogFilter RCFile
Check images ok
Download in speedup way
Open COM port success
OSBL version: 12-5035-AUSB1AM-09
osbl.mbn version:
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Open COM port success
Check Secure Boot is enabled
#Set Fast Boot Flag success
Open COM port success
Test communication success
Check Secure Boot is enabled
#DBL to DDR success
#FSBL to DDR success
#OSBL to DDR success
#DT to DDR success
#backup FSBL to DDR success
Run HEX success
Check Secure Boot is enabled
Streaming hello success
Send Security mode success
Download partition table success
#Download DBL success
#Download FSBL success
#Download OSBL success
#Download DT success
#Download backup FSBL success
Erase EFS2 success
Wait for rebooting ....... ok
Wait for modem set up ......
Wait for ADB device .........
ERROR[D2]: wait ADB fastboot mode timeout!
Please check that device is exist and driver is properly installed.
Download Fail! - 2011/05/07 18:43:45
Elapsed Time: 30.39 secgo stays on.
Look at my post on this thread, i had the exact problem and i solved it.
http://forum.xda-developers.com/showpost.php?p=13446944&postcount=10
read the entire thread including my post, if you still have problems let me know.
link to entire thread.
http://forum.xda-developers.com/showthread.php?p=13446944#post13446944
Or follow this thread
http://forum.xda-developers.com/showthread.php?t=982906
Hello!
I can't flash my dell streak via QDLTool and my device is bricked now
Kind Regards!
log:
###QDLTool: M 2.7.4.8, build ID: 1.301.20101022, time stamp: Fri Sep 30 23:33:32 2011
Check image DBL: C:\Streak\repairtool\images\dbl.mbn ...
Check image FSBL: C:\Streak\repairtool\images\fsbl.mbn ...
Check image OSBL: C:\Streak\repairtool\images\osbl.mbn ...
Check image AMSS: C:\Streak\repairtool\images\amss.mbn ...
Check image DSP1: C:\Streak\repairtool\images\dsp1.mbn ...
Check image APPSBL: C:\Streak\repairtool\images\appsboot.mbn ...
Check image DT: C:\Streak\repairtool\images\DT.img ...
Check image boot.img: C:\Streak\repairtool\images\boot.img ...
Check image system.img: C:\Streak\repairtool\images\system.img ...
Check image userdata.img: C:\Streak\repairtool\images\userdata.img ...
Check image recovery.img: C:\Streak\repairtool\images\recovery.img ...
Check image logfilter.img: C:\Streak\repairtool\images\logfilter.img ...
Check image Region: C:\Streak\repairtool\images\RC_us.img ...
Check images: Partition Dbl Fsbl Osbl Amss Dsp1 DT Appsbl Boot System Userdata Recovery LogFilter RCFile
Check images ok
Download in speedup way
Open COM port success
OSBL version: 12-5035-AUSB1AM-09
osbl.mbn version:
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Open COM port success
Check Secure Boot is enabled
#Set Fast Boot Flag success
Open COM port success
Test communication success
Check Secure Boot is enabled
#DBL to DDR success
#FSBL to DDR success
#OSBL to DDR success
#DT to DDR success
#backup FSBL to DDR success
Run HEX success
Check Secure Boot is enabled
Streaming hello success
Send Security mode success
Download partition table success
#Download DBL success
#Download FSBL success
#Download OSBL success
#Download DT success
#Download backup FSBL success
Erase EFS2 success
Wait for rebooting ....... ok
Wait for modem set up ......
Wait for ADB device .........
ERROR[D2]: wait ADB fastboot mode timeout!
Please check that device is exist and driver is properly installed.
Download Fail! - 2011/09/30 23:34:17
Elapsed Time: 45.03 sec
same problem here
i try streakflash also, all done successfully,but still in same situation ,no fastboot no recovery , only hang on dell logo
Any solution for this? I'm also in this jam.
are you running 64 bit windows? If so there are some special instructions that need to be followed. There is a flash video here that shows you how:http://www.streakdroid.com/modules.php?name=Downloads&d_op=viewdownload&cid=2
It's the win64 tutorial file at the bottom. I just used it Monday and it worked flawlessly.
lordmorphous said:
are you running 64 bit windows? If so there are some special instructions that need to be followed. There is a flash video here that shows you how:http://www.streakdroid.com/modules.php?name=Downloads&d_op=viewdownload&cid=2
It's the win64 tutorial file at the bottom. I just used it Monday and it worked flawlessly.
Click to expand...
Click to collapse
Thanks for the links, but I think its broken...I am also stuck at the same place...can you please help?
Thanks!
I don't know how much help I can be aside from the tutorial videos. I just followed them and it worked.
Make sure your drivers are installed correctly for adb. You can start with this post:
http://forum.pocketables.net/showpost.php?p=59264&postcount=2
Please! help me!
I`m using Rom 360 and last night, i up rom 407 Olleh. When rom updating finish, Streak reboot and freeze logo Dell, not bootting fastboot = Power + Camera.
i`m tried QDL:
1/ Streakflash:.......ok and reboot
2/ QDLtool 2.7.4.8: .....
Check images: Partition Dbl Fsbl Osbl Amss Dsp1 DT Appsbl Boot System Userdata Recovery LogFilter RCFile
Check images ok
###QDLTool: M 2.7.4.8, build ID: 1.301.20101022, time stamp: Mon Feb 13 02:52:51 2012
Check image DBL: D:\QDLTool3rd_20101022_GAUSB1A130500\images\dbl.mbn ...
Check image FSBL: D:\QDLTool3rd_20101022_GAUSB1A130500\images\fsbl.mbn ...
Check image OSBL: D:\QDLTool3rd_20101022_GAUSB1A130500\images\osbl.mbn ...
Check image AMSS: D:\QDLTool3rd_20101022_GAUSB1A130500\images\amss.mbn ...
Check image DSP1: D:\QDLTool3rd_20101022_GAUSB1A130500\images\dsp1.mbn ...
Check image APPSBL: D:\QDLTool3rd_20101022_GAUSB1A130500\images\appsboot.mbn ...
Check image DT: D:\QDLTool3rd_20101022_GAUSB1A130500\images\DT.img ...
Check image boot.img: D:\QDLTool3rd_20101022_GAUSB1A130500\images\boot.img ...
Check image system.img: D:\QDLTool3rd_20101022_GAUSB1A130500\images\system.img ...
Check image userdata.img: D:\QDLTool3rd_20101022_GAUSB1A130500\images\userdata.img ...
Check image recovery.img: D:\QDLTool3rd_20101022_GAUSB1A130500\images\recovery.img ...
Check image logfilter.img: D:\QDLTool3rd_20101022_GAUSB1A130500\images\logfilter.img ...
Check image Region: D:\QDLTool3rd_20101022_GAUSB1A130500\images\RC_us.img ...
Check images: Partition Dbl Fsbl Osbl Amss Dsp1 DT Appsbl Boot System Userdata Recovery LogFilter RCFile
Check images ok
Download in speedup way
Open COM port success
OSBL version: 12-5035-AUSB1AM-09
osbl.mbn version:
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Open COM port success
Check Secure Boot is enabled
#Set Fast Boot Flag success
Open COM port success
Test communication success
Check Secure Boot is enabled
#DBL to DDR success
#FSBL to DDR success
#OSBL to DDR success
#DT to DDR success
#backup FSBL to DDR success
Run HEX success
Check Secure Boot is enabled
Streaming hello success
Send Security mode success
Download partition table success
#Download DBL success
#Download FSBL success
#Download OSBL success
#Download DT success
#Download backup FSBL success
Erase EFS2 success
Wait for rebooting ....... ok
Wait for modem set up ......
Wait for ADB device .........
ERROR[D2]: wait ADB fastboot mode timeout!
Please check that device is exist and driver is properly installed.
Download Fail! - 2012/02/13 02:53:20
Elapsed Time: 29.04 sec
Streak no change ADB device, I don`t undertand what happned?
I need to get into fastboot mode (to flash the correct files) or anyhow get my phone working
I`m tried:
1) Run streakflash version from the streakflash.zip(after extraction though).
2) Boot into diagnostic mode (Vol Up + Power button) and connect the USB cable to the computer. 'Qualcomm HS-USB Diagnostics 9002' will show in the port field in streakflash QDL tool.
3) Hit the run button. The process should stop at success.
4) Disconnect USB cable and close streakflash QDL tool.
5) Now run the QDL tool that came in repairtool.zip (after extraction though).
6) Boot the Streak into diagnostic mode (Vol Up + Power button) and connect the USB cable to the computer. 'Qualcomm HS-USB Diagnostics 9002' will show in the port field in QDL tool.
7) Hit the run button. The process should stop at success. If not, dont forget try again and again. Make sure you change USB ports (to which you are connecting ur streak) on ur system too.
...but...not work.....!!
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums & Read the Forum Rules
Moving to Q&A
Try again but just with the old qdl called also streakflash , don't repeat with the new qdl the process, immediately go to fasbootmod after ONLY the first step , fastboot will be there, the rest you already know