Please! help me!
I`m using Rom 360 and last night, i up rom 407 Olleh. When rom updating finish, Streak reboot and freeze logo Dell, not bootting fastboot = Power + Camera.
i`m tried QDL:
1/ Streakflash:.......ok and reboot
2/ QDLtool 2.7.4.8: .....
Check images: Partition Dbl Fsbl Osbl Amss Dsp1 DT Appsbl Boot System Userdata Recovery LogFilter RCFile
Check images ok
###QDLTool: M 2.7.4.8, build ID: 1.301.20101022, time stamp: Mon Feb 13 02:52:51 2012
Check image DBL: D:\QDLTool3rd_20101022_GAUSB1A130500\images\dbl.mbn ...
Check image FSBL: D:\QDLTool3rd_20101022_GAUSB1A130500\images\fsbl.mbn ...
Check image OSBL: D:\QDLTool3rd_20101022_GAUSB1A130500\images\osbl.mbn ...
Check image AMSS: D:\QDLTool3rd_20101022_GAUSB1A130500\images\amss.mbn ...
Check image DSP1: D:\QDLTool3rd_20101022_GAUSB1A130500\images\dsp1.mbn ...
Check image APPSBL: D:\QDLTool3rd_20101022_GAUSB1A130500\images\appsboot.mbn ...
Check image DT: D:\QDLTool3rd_20101022_GAUSB1A130500\images\DT.img ...
Check image boot.img: D:\QDLTool3rd_20101022_GAUSB1A130500\images\boot.img ...
Check image system.img: D:\QDLTool3rd_20101022_GAUSB1A130500\images\system.img ...
Check image userdata.img: D:\QDLTool3rd_20101022_GAUSB1A130500\images\userdata.img ...
Check image recovery.img: D:\QDLTool3rd_20101022_GAUSB1A130500\images\recovery.img ...
Check image logfilter.img: D:\QDLTool3rd_20101022_GAUSB1A130500\images\logfilter.img ...
Check image Region: D:\QDLTool3rd_20101022_GAUSB1A130500\images\RC_us.img ...
Check images: Partition Dbl Fsbl Osbl Amss Dsp1 DT Appsbl Boot System Userdata Recovery LogFilter RCFile
Check images ok
Download in speedup way
Open COM port success
OSBL version: 12-5035-AUSB1AM-09
osbl.mbn version:
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Open COM port success
Check Secure Boot is enabled
#Set Fast Boot Flag success
Open COM port success
Test communication success
Check Secure Boot is enabled
#DBL to DDR success
#FSBL to DDR success
#OSBL to DDR success
#DT to DDR success
#backup FSBL to DDR success
Run HEX success
Check Secure Boot is enabled
Streaming hello success
Send Security mode success
Download partition table success
#Download DBL success
#Download FSBL success
#Download OSBL success
#Download DT success
#Download backup FSBL success
Erase EFS2 success
Wait for rebooting ....... ok
Wait for modem set up ......
Wait for ADB device .........
ERROR[D2]: wait ADB fastboot mode timeout!
Please check that device is exist and driver is properly installed.
Download Fail! - 2012/02/13 02:53:20
Elapsed Time: 29.04 sec
Streak no change ADB device, I don`t undertand what happned?
I need to get into fastboot mode (to flash the correct files) or anyhow get my phone working
I`m tried:
1) Run streakflash version from the streakflash.zip(after extraction though).
2) Boot into diagnostic mode (Vol Up + Power button) and connect the USB cable to the computer. 'Qualcomm HS-USB Diagnostics 9002' will show in the port field in streakflash QDL tool.
3) Hit the run button. The process should stop at success.
4) Disconnect USB cable and close streakflash QDL tool.
5) Now run the QDL tool that came in repairtool.zip (after extraction though).
6) Boot the Streak into diagnostic mode (Vol Up + Power button) and connect the USB cable to the computer. 'Qualcomm HS-USB Diagnostics 9002' will show in the port field in QDL tool.
7) Hit the run button. The process should stop at success. If not, dont forget try again and again. Make sure you change USB ports (to which you are connecting ur streak) on ur system too.
...but...not work.....!!
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums & Read the Forum Rules
Moving to Q&A
Try again but just with the old qdl called also streakflash , don't repeat with the new qdl the process, immediately go to fasbootmod after ONLY the first step , fastboot will be there, the rest you already know
Related
QDLTool: M 2.7.4.8, Build ID: 1.301.20101022, SW: 12-5035-AUSB1AM-09
Report:
HW:
Board ID:
Comment:
--
LOG
--
###QDLTool: M 2.7.4.8, build ID: 1.301.20101022, time stamp: Sat Jan 22 19:15:11 2011
Check image DBL: C:\Streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\dbl.mbn ...
Check image FSBL: C:\Streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\fsbl.mbn ...
Check image OSBL: C:\Streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\osbl.mbn ...
Check image AMSS: C:\Streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\amss.mbn ...
Check image DSP1: C:\Streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\dsp1.mbn ...
Check image APPSBL: C:\Streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\appsboot.mbn ...
Check image DT: C:\Streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\DT.img ...
Check image boot.img: C:\Streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\boot.img ...
Check image system.img: C:\Streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\system.img ...
Check image userdata.img: C:\Streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\userdata.img ...
Check image recovery.img: C:\Streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\recovery.img ...
Check image logfilter.img: C:\Streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\logfilter.img ...
Check image Region: C:\Streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\RC_us.img ...
Check images: Partition Dbl Fsbl Osbl Amss Dsp1 DT Appsbl Boot System Userdata Recovery LogFilter RCFile
Check images ok
Download in speedup way
Open COM port success
OSBL version: 12-5035-AUSB1AM-09
osbl.mbn version:
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Open COM port success
Check Secure Boot is enabled
#Set Fast Boot Flag success
Open COM port success
Test communication success
Check Secure Boot is enabled
#DBL to DDR success
#FSBL to DDR success
#OSBL to DDR success
#DT to DDR success
#backup FSBL to DDR success
Run HEX success
Check Secure Boot is enabled
Streaming hello success
Send Security mode success
Download partition table success
#Download DBL success
#Download FSBL success
#Download OSBL success
#Download DT success
#Download backup FSBL success
Erase EFS2 success
Wait for rebooting ....... ok
Wait for modem set up ......
Wait for ADB device .........
ERROR[D2]: wait ADB fastboot mode timeout!
Please check that device is exist and driver is properly installed.
Download Fail! - 2011/01/22 19:15:52
Elapsed Time: 40.56 sec
Any ideas? I did this process way to many times (this is because i tried to update to 1.6.1 from 1.6.0 and i got to many error messages..
and yes i am using ADB r288920
i was getting the same issues yesterday, flash 1.5.1 again, and make a factoty reset using clockwork then boot in recovery mode and make a factory reset agaion using the dell recovery option 1. and your phone should boot again, once booted u can flash 1.6.0 and 1.6.1.
Make sure you have the right driver installed, I was having the same issue. Head over to the streaksmart forums, there is a thread about QDL. I belive the 2nd or 3rd reply has the steps to fix the issue.
Sent from my Dell Streak using XDA App
###QDLTool: M 2.7.4.8, build ID: 1.301.20101022, time stamp: Mon Feb 21 10:21:48 2011
Check image DBL: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\dbl.mbn ...
Check image FSBL: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\fsbl.mbn ...
Check image OSBL: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\osbl.mbn ...
Check image AMSS: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\amss.mbn ...
Check image DSP1: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\dsp1.mbn ...
Check image APPSBL: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\appsboot.mbn ...
Check image DT: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\DT.img ...
Check image boot.img: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\boot.img ...
Check image system.img: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\system.img ...
Check image userdata.img: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\userdata.img ...
Check image recovery.img: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\recovery.img ...
Check image logfilter.img: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\logfilter.img ...
Check image Region: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\RC_us.img ...
Check images: Partition Dbl Fsbl Osbl Amss Dsp1 DT Appsbl Boot System Userdata Recovery LogFilter RCFile
Check images ok
Download in speedup way
Open COM port success
OSBL version: 12-5035-AUSB1AM-09
osbl.mbn version:
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Open COM port success
Check Secure Boot is enabled
#Set Fast Boot Flag success
Open COM port success
Test communication success
Check Secure Boot is enabled
#DBL to DDR success
#FSBL to DDR success
#OSBL to DDR success
#DT to DDR success
#backup FSBL to DDR success
Run HEX success
Check Secure Boot is enabled
Streaming hello success
Send Security mode success
Download partition table success
#Download DBL success
#Download FSBL success
#Download OSBL success
#Download DT success
#Download backup FSBL success
Erase EFS2 success
Wait for rebooting ....... ok
Wait for modem set up ......
Wait for ADB device .........
ERROR[D2]: wait ADB fastboot mode timeout!
Please check that device is exist and driver is properly installed.
Download Fail! - 2011/02/21 10:22:35
Elapsed Time: 47.11 sec
to me it looks like code that escaped from Tron Legacy
theskipshow said:
###QDLTool: M 2.7.4.8, build ID: 1.301.20101022, time stamp: Mon Feb 21 10:21:48 2011
Check image DBL: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\dbl.mbn ...
Check image FSBL: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\fsbl.mbn ...
Check image OSBL: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\osbl.mbn ...
Check image AMSS: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\amss.mbn ...
Check image DSP1: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\dsp1.mbn ...
Check image APPSBL: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\appsboot.mbn ...
Check image DT: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\DT.img ...
Check image boot.img: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\boot.img ...
Check image system.img: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\system.img ...
Check image userdata.img: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\userdata.img ...
Check image recovery.img: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\recovery.img ...
Check image logfilter.img: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\logfilter.img ...
Check image Region: C:\Users\Homie\Desktop\QDLTool3rd_20101022_GAUSB1A130500\images\RC_us.img ...
Check images: Partition Dbl Fsbl Osbl Amss Dsp1 DT Appsbl Boot System Userdata Recovery LogFilter RCFile
Check images ok
Download in speedup way
Open COM port success
OSBL version: 12-5035-AUSB1AM-09
osbl.mbn version:
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Open COM port success
Check Secure Boot is enabled
#Set Fast Boot Flag success
Open COM port success
Test communication success
Check Secure Boot is enabled
#DBL to DDR success
#FSBL to DDR success
#OSBL to DDR success
#DT to DDR success
#backup FSBL to DDR success
Run HEX success
Check Secure Boot is enabled
Streaming hello success
Send Security mode success
Download partition table success
#Download DBL success
#Download FSBL success
#Download OSBL success
#Download DT success
#Download backup FSBL success
Erase EFS2 success
Wait for rebooting ....... ok
Wait for modem set up ......
Wait for ADB device .........
ERROR[D2]: wait ADB fastboot mode timeout!
Please check that device is exist and driver is properly installed.
Download Fail! - 2011/02/21 10:22:35
Elapsed Time: 47.11 sec
Click to expand...
Click to collapse
What is showing on your streak when this errors in the QDL tool.....is it a whitescreen?
Code:
[COLOR=Red]ERROR[D2]: wait ADB fastboot mode timeout!
Please check that device is exist and driver is properly installed.[/COLOR]
This means you do not have the proper ADB driver installed.. its all done but need the adb drivers to restart your streak into fastboot mode.
Also you need to install the Fastboot driver. put your device in fastboot mode (power off, then hold camera button while powering on then press the top when you get to a whit screen with a keypad). Plug in to your PC and the driver is in the repairtool folder you extracted.
so what if its stuck on the dell screen ? and it just keep restarting what does that mean?
fone_fanatic said:
Code:
[COLOR=Red]ERROR[D2]: wait ADB fastboot mode timeout!
Please check that device is exist and driver is properly installed.[/COLOR]
This means you do not have the proper ADB driver installed.. its all done but need the adb drivers to restart your streak into fastboot mode.
Also you need to install the Fastboot driver. put your device in fastboot mode (power off, then hold camera button while powering on then press the top when you get to a whit screen with a keypad). Plug in to your PC and the driver is in the repairtool folder you extracted.
Click to expand...
Click to collapse
ive done everything but it gives me the same message
go here ftp://ftp.dell.com/Handheld/R288920.exe and download the adb drivers. Once installed try to run qdl tool. If you get this same error again, no problem, just go to device manager in windows and go to the exclamation point where it says adb device or dell streak or some kind of hardware ( should be the only exclamation point on your device manager). right click and choose update drivers and have windows search automatically. Windows will indeed find your adb drivers and then your qdl tool will work,. This exact thing happened to me. it has something to do with what version of microsoft .net framework you have based on what os you are running.
My dell streak doesn't go past dell logo
"Recovery mode", by holding "Vol up, down and power" at the same time not working.
Fastboot not working as well. just power boton and dell logo stays on.
help me please!!!
QDLTool
Check image DBL: C:\streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\dbl.mbn ...
Check image FSBL: C:\streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\fsbl.mbn ...
Check image OSBL: C:\streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\osbl.mbn ...
Check image AMSS: C:\streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\amss.mbn ...
Check image DSP1: C:\streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\dsp1.mbn ...
Check image APPSBL: C:\streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\appsboot.mbn ...
Check image DT: C:\streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\DT.img ...
Check image boot.img: C:\streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\boot.img ...
Check image system.img: C:\streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\system.img ...
Check image userdata.img: C:\streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\userdata.img ...
Check image recovery.img: C:\streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\recovery.img ...
Check image logfilter.img: C:\streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\logfilter.img ...
Check image Region: C:\streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\RC_us.img ...
Check images: Partition Dbl Fsbl Osbl Amss Dsp1 DT Appsbl Boot System Userdata Recovery LogFilter RCFile
Check images ok
Download in speedup way
Open COM port success
OSBL version: 12-5035-AUSB1AM-09
osbl.mbn version:
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Open COM port success
Check Secure Boot is enabled
#Set Fast Boot Flag success
Open COM port success
Test communication success
Check Secure Boot is enabled
#DBL to DDR success
#FSBL to DDR success
#OSBL to DDR success
#DT to DDR success
#backup FSBL to DDR success
Run HEX success
Check Secure Boot is enabled
Streaming hello success
Send Security mode success
Download partition table success
#Download DBL success
#Download FSBL success
#Download OSBL success
#Download DT success
#Download backup FSBL success
Erase EFS2 success
Wait for rebooting ....... ok
Wait for modem set up ......
Wait for ADB device .........
ERROR[D2]: wait ADB fastboot mode timeout!
Please check that device is exist and driver is properly installed.
Download Fail! - 2011/05/07 18:43:45
Elapsed Time: 30.39 secgo stays on.
Look at my post on this thread, i had the exact problem and i solved it.
http://forum.xda-developers.com/showpost.php?p=13446944&postcount=10
read the entire thread including my post, if you still have problems let me know.
link to entire thread.
http://forum.xda-developers.com/showthread.php?p=13446944#post13446944
Or follow this thread
http://forum.xda-developers.com/showthread.php?t=982906
Hello!
I can't flash my dell streak via QDLTool and my device is bricked now
Kind Regards!
log:
###QDLTool: M 2.7.4.8, build ID: 1.301.20101022, time stamp: Fri Sep 30 23:33:32 2011
Check image DBL: C:\Streak\repairtool\images\dbl.mbn ...
Check image FSBL: C:\Streak\repairtool\images\fsbl.mbn ...
Check image OSBL: C:\Streak\repairtool\images\osbl.mbn ...
Check image AMSS: C:\Streak\repairtool\images\amss.mbn ...
Check image DSP1: C:\Streak\repairtool\images\dsp1.mbn ...
Check image APPSBL: C:\Streak\repairtool\images\appsboot.mbn ...
Check image DT: C:\Streak\repairtool\images\DT.img ...
Check image boot.img: C:\Streak\repairtool\images\boot.img ...
Check image system.img: C:\Streak\repairtool\images\system.img ...
Check image userdata.img: C:\Streak\repairtool\images\userdata.img ...
Check image recovery.img: C:\Streak\repairtool\images\recovery.img ...
Check image logfilter.img: C:\Streak\repairtool\images\logfilter.img ...
Check image Region: C:\Streak\repairtool\images\RC_us.img ...
Check images: Partition Dbl Fsbl Osbl Amss Dsp1 DT Appsbl Boot System Userdata Recovery LogFilter RCFile
Check images ok
Download in speedup way
Open COM port success
OSBL version: 12-5035-AUSB1AM-09
osbl.mbn version:
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Open COM port success
Check Secure Boot is enabled
#Set Fast Boot Flag success
Open COM port success
Test communication success
Check Secure Boot is enabled
#DBL to DDR success
#FSBL to DDR success
#OSBL to DDR success
#DT to DDR success
#backup FSBL to DDR success
Run HEX success
Check Secure Boot is enabled
Streaming hello success
Send Security mode success
Download partition table success
#Download DBL success
#Download FSBL success
#Download OSBL success
#Download DT success
#Download backup FSBL success
Erase EFS2 success
Wait for rebooting ....... ok
Wait for modem set up ......
Wait for ADB device .........
ERROR[D2]: wait ADB fastboot mode timeout!
Please check that device is exist and driver is properly installed.
Download Fail! - 2011/09/30 23:34:17
Elapsed Time: 45.03 sec
same problem here
i try streakflash also, all done successfully,but still in same situation ,no fastboot no recovery , only hang on dell logo
Any solution for this? I'm also in this jam.
are you running 64 bit windows? If so there are some special instructions that need to be followed. There is a flash video here that shows you how:http://www.streakdroid.com/modules.php?name=Downloads&d_op=viewdownload&cid=2
It's the win64 tutorial file at the bottom. I just used it Monday and it worked flawlessly.
lordmorphous said:
are you running 64 bit windows? If so there are some special instructions that need to be followed. There is a flash video here that shows you how:http://www.streakdroid.com/modules.php?name=Downloads&d_op=viewdownload&cid=2
It's the win64 tutorial file at the bottom. I just used it Monday and it worked flawlessly.
Click to expand...
Click to collapse
Thanks for the links, but I think its broken...I am also stuck at the same place...can you please help?
Thanks!
I don't know how much help I can be aside from the tutorial videos. I just followed them and it worked.
Make sure your drivers are installed correctly for adb. You can start with this post:
http://forum.pocketables.net/showpost.php?p=59264&postcount=2
Hi everyone,
yes, I have done a lot of reading of unbricking tutorials and threads, including this one:
http://forum.xda-developers.com/showthread.php?t=982906&highlight=bricked&page=2
Unfortunately, the solutions that work for others, did not work for me.
I bought used Streak off Ebay, The seller stated that the Streak was flashed with custom 2.4.4 version. Upon receive I switched it on, the Streak booted up, then suddenly rebooted in, like 10 seconds. After that, it stuck at Dell logo.
Since it has the custom recovery ClockworkMod v2.5.0.1, I downloaded some custom ROMs and tried to flash them. I was able to get to recovery mode and install the ROM stored on the CD card. After rebooting the device, it never booted up completely. It just freeze on StreakDroid logo, when I installed StreakDroid 2.0, or just rebooting in a loop with "resetting factory defaults. please wait" sign when I flashed ver.2.4.4
Well, I decided to go ahead and to install the factory recovery and stock ROM.
No luck! (I guess, that's important point): I can't get to fastboot mode by pressing [camera]+[power] buttons. The white screen does not come up (as it should, I believe), the screen and buttons remain dark.
Next, I tried the Streakflash.It has done it's job with a green background screen,
and messaged something like this:
Code:
blahblahblah
#Download backup FSBL success
#Download backup OSBL success
#Download backup DT success
#Download backup APPSBL success
Erase EFS2 success
Wait for rebooting ....... ok
Wait for modem set up ......
Download success - 2011/11/25 10:25:16
Elapsed Time: 82.69 sec
After that, instead of switching to fastboot mode, the device just turns off and I just can see the battery charge indicator for about 5 seconds.
Afterwards, I tried the QDLTool (which I believe is extended version of the StreakFlash)
This one returned the timeout error:
Code:
Wait for rebooting ....... ok
Wait for modem set up ......
Wait for ADB device .........
ERROR[D2]: wait ADB fastboot mode timeout!
Please check that device is exist and driver is properly installed.
I double checked that the Dell R288920 drivers were installed, and tried it on different PCs and different USB ports.
Another reason it's NOT a driver issue is that the Streak can't get into fastboot mode aside of PC, by pressing [camera]+[power] buttons
After all, the Streak is "attempting" to load the OS, if I disconnect the battery for about 20 minutes or longer. But it never completed the boot-up process, freezing halfway.
Will much appreciate if any of you guys can point me to a right direction, how possibly can I get my streak back to life.
Thanks.
PS. I'm using 32 bit win7 ultimate
which version of qdltool did you use?? i had same problam with mine and once qdltool got to the point of looking for the phone in fastboot mode it would fail
what i had to as download the oldest version of qdltool from here
http://mirror2.streakdroid.com/manii/Tools/
download version (10323)
it worked for me , let me know if this helps
[email protected] said:
which version of qdltool did you use?? i had same problam with mine and once qdltool got to the point of looking for the phone in fastboot mode it would fail
what i had to as download the oldest version of qdltool from here
mirror2.streakdroid.com/manii/Tools
download version (10323)
it worked for me , let me know if this helps
Click to expand...
Click to collapse
are you referring to the QDLtool, or a command prompt fastboot and ADB programs?
It looks like that version 10323 you are referring to is a fastboot zip archive, not QDLtool
The qdltool I have is M 2.7.4.5 and M 2.7.4.8
Thanks.
right let me think here lol i have so many files on ,my comp trying to find right ones,
so youve tried both those versions and none work?
after using the 2.7.4.5 version, have you tried getting into fastboot mode by holding the camera button?
---------- Post added at 01:16 PM ---------- Previous post was at 12:59 PM ----------
ok it was 2.7.4.5 i used heres the log from it
Check images: Partition Dbl Fsbl Osbl Amss Dsp1 DT Appsbl
Check images ok
###QDLTool: M 2.7.4.5, build ID: 1.302.20100910, time stamp: Wed Dec 07 01:19:45 2011
Check image DBL: C:\Documents and Settings\andy\Desktop\streakflash\images\dbl.mbn ...
Check image FSBL: C:\Documents and Settings\andy\Desktop\streakflash\images\fsbl.mbn ...
Check image OSBL: C:\Documents and Settings\andy\Desktop\streakflash\images\osbl.mbn ...
Check image AMSS: C:\Documents and Settings\andy\Desktop\streakflash\images\amss.mbn ...
Check image DSP1: C:\Documents and Settings\andy\Desktop\streakflash\images\dsp1.mbn ...
Check image APPSBL: C:\Documents and Settings\andy\Desktop\streakflash\images\appsboot.mbn ...
Check image DT: C:\Documents and Settings\andy\Desktop\streakflash\images\DT.img ...
Check images: Partition Dbl Fsbl Osbl Amss Dsp1 DT Appsbl
Check images ok
Download in speedup way
Open COM port success
OSBL version: 12-5035-AUSB1AM-09
osbl.mbn version:
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Open COM port success
Test communication success
Check Secure Boot is enabled
#DBL to DDR success
#FSBL to DDR success
#OSBL to DDR success
#AMSS to DDR success
#DSP1 to DDR success
#DT to DDR success
#APPSBL to DDR success
#backup FSBL to DDR success
#backup OSBL to DDR success
#backup DT to DDR success
#backup APPSBL to DDR success
Run HEX success
Check Secure Boot is enabled
Streaming hello success
Send Security mode success
Download partition table success
#Download DBL success
#Download FSBL success
#Download OSBL success
#Download AMSS success
#Download DSP1 success
#Download DT success
#Download APPSBL success
#Download backup FSBL success
#Download backup OSBL success
#Download backup DT success
#Download backup APPSBL success
Erase EFS2 success
Wait for rebooting ....... ok
Wait for modem set up ......
Download success - 2011/12/07 01:21:09
Elapsed Time: 83.73 sec
as you can see it doesnt do the (wait for adb device)
this is the version that fixed mine
[email protected] said:
Download success - 2011/12/07 01:21:09
Elapsed Time: 83.73 sec
as you can see it doesnt do the (wait for adb device)
this is the version that fixed mine
Click to expand...
Click to collapse
I just edited my post, so you can see, I tried both versions.
Earlier one returned no error message, nor fixed the phone.
UPDATE:
I left the battery out of the phone for approx 1 hour. After I put it back and switched the phone on, the Streak loaded the OS completely!
It was alive for about 5 minutes, I even caught some text messages, before it froze completely.
have you tried a factoey reset via the dell recovery menu?
Please use the Q&A Forum for questions Thanks
Moving to Q&A
why was this moved to q+a, this isnt a question, hes looking for help, wasnt asking anything
He hung a [Q] label on the original post, thus it was moved.