problems with freex10 - no service - XPERIA X10 Q&A, Help & Troubleshooting

Hello, I managed to update normal freex10 beta 4, restarted a few times, all normal, but after restarting, could not find the signal, has to do with the model of my phone being X10A? is written in the corner all the time "no service"

Were u on the right baseball?
Try flashing . 435 firmware with flashtool Nd than freex10 4
edit: stupid auto correct lol i meant to say right baseband.
Sent from my X10i using XDA App

theres no way to put froyo on my device?

venomgz said:
theres no way to put froyo on my device?
Click to expand...
Click to collapse
With installing .435 yes.

ok... let me see
the fw 435 is the 2.1 eclair, right?
then i have to go back to 2.1 and try again with freex10 beta 4 using xrecover?

dont understand what ur saying.
flash .435 with flashtool if u dont already have that firmware, then use flashtool to root, jit, and install xrecovery. flash froyo with xrecovery.

sorry, my english isn't very well
i did the flash for the 435 fw and went back to 2.1 eclair, ok, now working
but i really wanna froyo, i installed againd by the same way, but still no working
the system is loaded, but without service and restarting
theres something else to do?

well
i installed the beta 3 with xrecovery, and now the service is working, but, i guess that theres something wrong, the baseband of my cellphone now is 2.0.46, but i need the baseband 2.1.54 for beta 4 works?
thanks

venomgz said:
well
i installed the beta 3 with xrecovery, and now the service is working, but, i guess that theres something wrong, the baseband of my cellphone now is 2.0.46, but i need the baseband 2.1.54 for beta 4 works?
thanks
Click to expand...
Click to collapse
Yes, you need .435 for beta 4.

strange... i already tryed the 435 and didn't work
when you say .435 you mean the 2.1_2_1_A_0_435_GLOBAL?
i installed this, but when i try to install the beta 4 with xrecovery, my cellphone can't find the service of my sim card
what i did wrong? =/
thanks and sorry again =/

venomgz said:
strange... i already tryed the 435 and didn't work
when you say .435 you mean the 2.1_2_1_A_0_435_GLOBAL?
i installed this, but when i try to install the beta 4 with xrecovery, my cellphone can't find the service of my sim card
what i did wrong? =/
thanks and sorry again =/
Click to expand...
Click to collapse
read the stickies in the q&a section

Related

[Q] Install FreeX10 Froyo 2.2 ROM and Back to 2.1

Hello everyone I'm new here at XDA.
Last monday I bought my Xperia x10 and I came here and learned a little bit about
hackig etc.
At the moment I know how to Install root, busybox, xRecovery, JIT and Dualtouch to my 2.1 phone. Learned these things today.
I found a friendy guide on this forum that shows how to install 2.2 from Froyo.
Friendy Guide
I would really like to install it, but I have no idead how to make my phone back to 2.1 If I install 2.2 Froyo Beta2.
To revert back to 2.1 just update it with SEUS (sonyericsson official update software). I have done it
true. all you need is an official update with seus
Thank you guys
Just 1 question before updating, I installed xRecovery on 2.1 now, if update to 2.2 Froyo
xRecovery is still there?
Oh and is there a root already for 2.2 Froyo?
5xL-Gaming said:
Thank you guys
Just 1 question before updating, I installed xRecovery on 2.1 now, if update to 2.2 Froyo
xRecovery is still there?
Oh and is there a root already for 2.2 Froyo?
Click to expand...
Click to collapse
xRecovery is there and it's rooted
Yeah cool thanks you all!
I noticed, the really pros are here
5xL-Gaming said:
Yeah cool thanks you all!
I noticed, the really pros are here
Click to expand...
Click to collapse
we are here to help
Installed now 2.2 Froyo but it's just rebooting and rebooting -.-
Used backup and restore from xrecovery.
You can used it to go back.
Sent from my X10i using Tapatalk
Try format is with xRecovery
Sent from my FX X10
Already made back to 2.1 with SEUS, I'm just unhappy that 2.2 is only crashing and rebooting ..
5xL-Gaming said:
Already made back to 2.1 with SEUS, I'm just unhappy that 2.2 is only crashing and rebooting ..
Click to expand...
Click to collapse
Make a backup with Xrecovery, so you can get back to where you were easily.
There was a post in How To 2.2 that had a bunch of steps to follow after install, it has been stable for me for days after that. Only a minor problem with Wi-Fi.
5xL-Gaming said:
Installed now 2.2 Froyo but it's just rebooting and rebooting -.-
Click to expand...
Click to collapse
Yeah thats what it does but eventually it will boot
Thanks guys, I'll use now this How to
http://forum.xda-developers.com/showthread.php?t=908791
edit; keeps crashing and rebooting after unlocking the screen. -.-

[Q] Installing Beta4 on Xperia x10

Hello everyone,
Today I have seen that there is a new Beta update at the Froyo rom.
Now I read "REQUIRES LATEST KERNEL AND BASEBAND 2.1.54 (shipped in stock 2.1.A.0.435 ROM)"
What I have to do now? Any explaination?
Flash, root & xrecovery instructions here:
http://forum.xda-developers.com/showthread.php?t=936733
Then follow Beta4 instructions.
I have found that beta 4 is eating my battery though. 10% per hour. I was using a third of that with Beta 3.
I going back to Beta 3 now.
i dont think we can use the above mentioned link for baseband update, check the reply by the author when someone had problem installing the freex10 beta4 in the same thread on page 2
rendeiro2005 said:
i wrote this so many times and you guys just don`t read, search, etc...
with this new FW you just CAN`T install anything through xRecovery! period.
so...if you want to install something, get rid of this FW install other, install xRecovery and voilá
Click to expand...
Click to collapse
Thank you guys for the help. I got a 2nd question: It say that I need the latest Kernel version.
I have 2.6.29 is this the latest?
arizhasan said:
i dont think we can use the above mentioned link for baseband update, check the reply by the author when someone had problem installing the freex10 beta4 in the same thread on page 2
Click to expand...
Click to collapse
Im pretty sure that was before the beta 4 came out. I think the correction is farther down...
Sent from my X10i using XDA App
2.1.54 is the latest baseband which comes with the 2.1.A.0.435 ROM (you even copied that on your first post ). Anyway, try reading this post by KULANV:
http://forum.xda-developers.com/show...postcount=3904
The steps he provided is easy to follow. I did mine the long way but that was before anyone posted the shorter way.
try this HOWTO, if you don't wanna mess something up!

[Q] Steve.Adams baseband update

I have no problem with using the flashtool, downloading the sin file, etc. But the step that says DO NOT let it boot and immediately go into xrecovery is what worries me. I love trying all the new ROMs, but am still always go back to a custom 2.1 because of the cam/videocam, plus no stereo bluetooth dropouts.
My question is, after I do this to update the baseband and flash 2.2 Beta 4 via xrecovery. Can I go back to my old custom 2.1 with older baseband via xrecovery and then switch back and forth via xrecovery afterward? I just don't feel like flashing the entire firmware, rooting, adding JIT v2, then removing all of the SE apps AGAIN for like the 10th time.
u can install any rom on .435 firmware..
u cant install beta 4 on any lower firmware(.24,etc)..
so update to .435 and stay..
happy flashing
sumeshd said:
u can install any rom on .435 firmware..
u cant install beta 4 on any lower firmware(.24,etc)..
so update to .435 and stay..
happy flashing
Click to expand...
Click to collapse
Im not entirely sure thats true because it seemed that those with the newer baseband seemed to be having issues with other roms prior to z's beta 4... can someone confirm?
Sent from my X10i using XDA App
its mentioned clearly in z's post about using the latest base band. as for Steve's recommendation of not letting it boot, i guess i must have missed it when i upgraded the base band while on 2.1 customised, but the only worst thing that happened was i didn't got any signal on my phone, everything else worked fine, it didn't mattered coz i was to install free x10 v4. and its a fine job done by z. the ROM is great. add green glow theme on it, and nothing's like it.
about xrecovery backup able to change your base band back with restore, i haven't tried it myself, i guess xrecovery devs will be the best guys to check if you're not sure.
Sent from my X10i using Tapatalk

[Q] Infinite loop with TripNRaver rom (can't post on dev forum)

Hi, and to begin with sorry I can't post in dev section, no enough messages yet...
So my X10 failed since I tried another rom. Ok, so I went back to X10 2.1 official, then I rooted, installed busbox, xRecovery...
Well, let's try a new rom. I chose the TripNRaver Arc rom 2.3 gingerbread. Then I flashed the .49 baseband as asked in his topic, however I have infinite loop reboot. But it boots to PIN number asked, I see the phone find the network, so I think baseband is not the problem... But I'm not pro.
Any ideas would be appreciated.
Sorry, my English is not perfect since I'm french.
Thank you
dunkerquois88 said:
Hi, and to begin with sorry I can't post in dev section, no enough messages yet...
So my X10 failed since I tried another rom. Ok, so I went back to X10 2.1 official, then I rooted, installed busbox, xRecovery...
Well, let's try a new rom. I chose the TripNRaver Arc rom 2.3 gingerbread. Then I flashed the .49 baseband as asked in his topic, however I have infinite loop reboot. But it boots to PIN number asked, I see the phone find the network, so I think baseband is not the problem... But I'm not pro.
Any ideas would be appreciated.
Sorry, my English is not perfect since I'm french.
Thank you
Click to expand...
Click to collapse
It should crash a few times.
But if it continues to do that you may have the same problem i have.
My x10i won't run that rom at all.
Can you try bb 52?
Try to crash system server a few times. If that's not working you should reflash stock firmware with flashtool, reroot, xrec and so on. Then reflash bb49 and reinstall the Rom. Good Luck
Sent from my CM 6.1.3 v006 using XDA Premium App
dunkerquois88 said:
Hi, and to begin with sorry I can't post in dev section, no enough messages yet...
So my X10 failed since I tried another rom. Ok, so I went back to X10 2.1 official, then I rooted, installed busbox, xRecovery...
Well, let's try a new rom. I chose the TripNRaver Arc rom 2.3 gingerbread. Then I flashed the .49 baseband as asked in his topic, however I have infinite loop reboot. But it boots to PIN number asked, I see the phone find the network, so I think baseband is not the problem... But I'm not pro.
Any ideas would be appreciated.
Sorry, my English is not perfect since I'm french.
Thank you
Click to expand...
Click to collapse
TRy the question and answer section
lifty95 said:
Try to crash system server a few times. If that's not working you should reflash stock firmware with flashtool, reroot, xrec and so on. Then reflash bb49 and reinstall the Rom. Good Luck
Sent from my CM 6.1.3 v006 using XDA Premium App
Click to expand...
Click to collapse
Does it helped???
sent from my x10i CM 6.1.3 v006 undervolted

TripNMiUI "Iris" 1.1.0 Froyo... HELP!!

Hello guys,
I flashed my X10 to [ROM] [25-05] TripNMiUI "Iris" 1.1.0 Froyo, downloaded here in XDA. So, now my phone don't stop rebooting.
There says that custom kernels are not supported, so, I've tried to do it with cutom and stock kernels.
BB version in phone shows "unknown", can be it the problem??
My bb is .52, this rom works on .49 and .52, so it can't be a problem.
Could you help me?
Thanks.
maybe u can try flash your baseband to .49 with flashtool and reinstall trips custom rom with xrecovery?
darkvalance said:
maybe u can try flash your baseband to .49 with flashtool and reinstall trips custom rom with xrecovery?
Click to expand...
Click to collapse
I've tried it now...
In BB .49 x10 don't reboot!! But it don't get network too
sbr.anderson said:
I've tried it now...
In BB .49 x10 don't reboot!! But it don't get network too
Click to expand...
Click to collapse
Try crashing it? Dev tools -> bad behaviour -> crash system server
Sent from my X10 TripNMiUI using XDA App
sbr.anderson said:
I've tried it now...
In BB .49 x10 don't reboot!! But it don't get network too
Click to expand...
Click to collapse
Maybe you should try his older version of 1.0.9 instead
I flashed again with .52 and it half works...
Now 3G data doesn't communicate. =/
Today is not my day... =[
i have this issue aswell even i use crashed the server i still did not get any signal :S
I had the same issue with that rom. I had the use the sony software and restore it, root it, reflash it and import all my apps again. After that all was great.
On the plus side using the phone in standard mode just reminded how much trips roms has made the x10. Without trip and the gang in xda this phone would have been on ebay months ago!
Sent from my X10 TripNMiUI using Tapatalk
sbr.anderson said:
I flashed again with .52 and it half works...
Now 3G data doesn't communicate. =/
Today is not my day... =[
Click to expand...
Click to collapse
i am on BB 52 and it is working great with me
just flash BB52 wipe everything then install the zip file
reboot and leave the mobile for 2-3 min it will reboot by itself , hope it will work with you
hbhtts said:
i am on BB 52 and it is working great with me
just flash BB52 wipe everything then install the zip file
reboot and leave the mobile for 2-3 min it will reboot by itself , hope it will work with you
Click to expand...
Click to collapse
That worked for me and i was in baseband .52 too but i went back to my modded stock ROM because i was receiving a lot of FC with TripnMiUI and the phone was a little laggy too o.o...and i didn't like MiUI that much xDD
Thank you guys... tonight I'll try it again... I hope it works 100% :/
Same problem here.
So... I've tried again, TripNMiUI "Iris" 1.2.0 Froyo! and 3G data doesn't work. =/
Only wifi =[
And FruitNinja game was laggy =/

Categories

Resources