Hello guys,
I flashed my X10 to [ROM] [25-05] TripNMiUI "Iris" 1.1.0 Froyo, downloaded here in XDA. So, now my phone don't stop rebooting.
There says that custom kernels are not supported, so, I've tried to do it with cutom and stock kernels.
BB version in phone shows "unknown", can be it the problem??
My bb is .52, this rom works on .49 and .52, so it can't be a problem.
Could you help me?
Thanks.
maybe u can try flash your baseband to .49 with flashtool and reinstall trips custom rom with xrecovery?
darkvalance said:
maybe u can try flash your baseband to .49 with flashtool and reinstall trips custom rom with xrecovery?
Click to expand...
Click to collapse
I've tried it now...
In BB .49 x10 don't reboot!! But it don't get network too
sbr.anderson said:
I've tried it now...
In BB .49 x10 don't reboot!! But it don't get network too
Click to expand...
Click to collapse
Try crashing it? Dev tools -> bad behaviour -> crash system server
Sent from my X10 TripNMiUI using XDA App
sbr.anderson said:
I've tried it now...
In BB .49 x10 don't reboot!! But it don't get network too
Click to expand...
Click to collapse
Maybe you should try his older version of 1.0.9 instead
I flashed again with .52 and it half works...
Now 3G data doesn't communicate. =/
Today is not my day... =[
i have this issue aswell even i use crashed the server i still did not get any signal :S
I had the same issue with that rom. I had the use the sony software and restore it, root it, reflash it and import all my apps again. After that all was great.
On the plus side using the phone in standard mode just reminded how much trips roms has made the x10. Without trip and the gang in xda this phone would have been on ebay months ago!
Sent from my X10 TripNMiUI using Tapatalk
sbr.anderson said:
I flashed again with .52 and it half works...
Now 3G data doesn't communicate. =/
Today is not my day... =[
Click to expand...
Click to collapse
i am on BB 52 and it is working great with me
just flash BB52 wipe everything then install the zip file
reboot and leave the mobile for 2-3 min it will reboot by itself , hope it will work with you
hbhtts said:
i am on BB 52 and it is working great with me
just flash BB52 wipe everything then install the zip file
reboot and leave the mobile for 2-3 min it will reboot by itself , hope it will work with you
Click to expand...
Click to collapse
That worked for me and i was in baseband .52 too but i went back to my modded stock ROM because i was receiving a lot of FC with TripnMiUI and the phone was a little laggy too o.o...and i didn't like MiUI that much xDD
Thank you guys... tonight I'll try it again... I hope it works 100% :/
Same problem here.
So... I've tried again, TripNMiUI "Iris" 1.2.0 Froyo! and 3G data doesn't work. =/
Only wifi =[
And FruitNinja game was laggy =/
Related
I don't understand why my X10i BB 2.1.54 currently running MIUI 0.3.1 ROM from Trip gave me soooo much reboots.
I gave my X10i re-flashed about 5 times already and still had no luck to get a rid of this. It caused random reboots while I was using wifi or edge / gprs.
PLEASE ADVICE!!!
kenzes said:
I don't understand why my X10i BB 2.1.54 currently running MIUI 0.3.1 ROM from Trip gave me soooo much reboots.
I gave my X10i re-flashed about 5 times already and still had no luck to get a rid of this. It caused random reboots while I was using wifi or edge / gprs.
PLEASE ADVICE!!!
Click to expand...
Click to collapse
Use baseband .49.
Thank you PlayGunsta! I will flash my baseband back to 2.0.49 and will report this back..... Maybe some of others had this problem also. This could help others
kenzes said:
Thank you PlayGunsta! I will flash my baseband back to 2.0.49 and will report this back..... Maybe some of others had this problem also. This could help others
Click to expand...
Click to collapse
If you did read the MIUI thread of Trip good, you would see he is recommending baseband .49.
Succes, and report progress buddy.
I have also had a lot of reboots with trips rom, but after a while when the cache is populated it settles down. To sum it up. Whenever I install a new application or use something I have not used before (market, mail client, etc) it will reboot after a little while (this is especially noticeable for apps that uses any form of communication). But after the first reboot/app I have not been noticing a lot of reboots.
bablefish69 said:
I have also had a lot of reboots with trips rom, but after a while when the cache is populated it settles down. To sum it up. Whenever I install a new application or use something I have not used before (market, mail client, etc) it will reboot after a little while (this is especially noticeable for apps that uses any form of communication). But after the first reboot/app I have not been noticing a lot of reboots.
Click to expand...
Click to collapse
What baseband r u on with this Trip ROM?
I'm on .49 but it still reboots very much.
Wiped everything, clean install baseband .49 still lots of reboots. Cant download any app from market. It reboots.
hey guyz, i tried using the flashtool to flash the 0.49 baseband but it never seems to work for me. first i flash the X10a_2.1update1_r2.1.A.0.435_Generic.ftf which comes with .54 baseband. then i used xrecovery to install miui 1.0.5. i know it says we need .49 or .52 baseband but i cant get to flash it. it flashes and at the end u get msg saying unplug device, turn on debug and i chek the baseband, it says unknown. please help me get baseband .49 on my x10.
kenzes said:
I don't understand why my X10i BB 2.1.54 currently running MIUI 0.3.1 ROM from Trip gave me soooo much reboots.
I gave my X10i re-flashed about 5 times already and still had no luck to get a rid of this. It caused random reboots while I was using wifi or edge / gprs.
PLEASE ADVICE!!!
Click to expand...
Click to collapse
I'm also experiencing the same rebooting problem. Has anyone found a downlink link and flash instructions for bb 49?
PLEASE HELP ;o)
Hi, and to begin with sorry I can't post in dev section, no enough messages yet...
So my X10 failed since I tried another rom. Ok, so I went back to X10 2.1 official, then I rooted, installed busbox, xRecovery...
Well, let's try a new rom. I chose the TripNRaver Arc rom 2.3 gingerbread. Then I flashed the .49 baseband as asked in his topic, however I have infinite loop reboot. But it boots to PIN number asked, I see the phone find the network, so I think baseband is not the problem... But I'm not pro.
Any ideas would be appreciated.
Sorry, my English is not perfect since I'm french.
Thank you
dunkerquois88 said:
Hi, and to begin with sorry I can't post in dev section, no enough messages yet...
So my X10 failed since I tried another rom. Ok, so I went back to X10 2.1 official, then I rooted, installed busbox, xRecovery...
Well, let's try a new rom. I chose the TripNRaver Arc rom 2.3 gingerbread. Then I flashed the .49 baseband as asked in his topic, however I have infinite loop reboot. But it boots to PIN number asked, I see the phone find the network, so I think baseband is not the problem... But I'm not pro.
Any ideas would be appreciated.
Sorry, my English is not perfect since I'm french.
Thank you
Click to expand...
Click to collapse
It should crash a few times.
But if it continues to do that you may have the same problem i have.
My x10i won't run that rom at all.
Can you try bb 52?
Try to crash system server a few times. If that's not working you should reflash stock firmware with flashtool, reroot, xrec and so on. Then reflash bb49 and reinstall the Rom. Good Luck
Sent from my CM 6.1.3 v006 using XDA Premium App
dunkerquois88 said:
Hi, and to begin with sorry I can't post in dev section, no enough messages yet...
So my X10 failed since I tried another rom. Ok, so I went back to X10 2.1 official, then I rooted, installed busbox, xRecovery...
Well, let's try a new rom. I chose the TripNRaver Arc rom 2.3 gingerbread. Then I flashed the .49 baseband as asked in his topic, however I have infinite loop reboot. But it boots to PIN number asked, I see the phone find the network, so I think baseband is not the problem... But I'm not pro.
Any ideas would be appreciated.
Sorry, my English is not perfect since I'm french.
Thank you
Click to expand...
Click to collapse
TRy the question and answer section
lifty95 said:
Try to crash system server a few times. If that's not working you should reflash stock firmware with flashtool, reroot, xrec and so on. Then reflash bb49 and reinstall the Rom. Good Luck
Sent from my CM 6.1.3 v006 using XDA Premium App
Click to expand...
Click to collapse
Does it helped???
sent from my x10i CM 6.1.3 v006 undervolted
I cant send texts on my x10a after rooting and flashing TW V008 ROM. It just stays at sending. I cant recieve any either. Any help?
First off you should try posting in the right section
What baseband are you on? Assuming you're on AT&T. Had same issue. Best for me is base band 67 with kernel from 65 (if you're not using custom kernel)
Gimme some more info.
Edit: (dammit Pawnty beat me....)
@Pawny, if youre not going to help, just dont post
And @andrew .. Yes i am on at&t. Im using baseband 2.1.65 .. maybe thats the problem?
shawayne21 said:
@Pawny, if youre not going to help, just dont post
And @andrew .. Yes i am on at&t. Im using baseband 2.1.65 .. maybe thats the problem?
Click to expand...
Click to collapse
Try this.
Flash it in recovery and lemme know if it helps.
If not, then you may want to try a complete wipe and clean install. AT&T is a ***** with the SMS on custom ROMs. Kinda hit-or-miss.
I think that the x10a has something different going on than the x10i.
Trip noticed a difference over in da neederlands with a x10a replacing his x10i.
Dunno what it could be.
andrewddickey said:
Try this.
Flash it in recovery and lemme know if it helps.
If not, then you may want to try a complete wipe and clean install. AT&T is a ***** with the SMS on custom ROMs. Kinda hit-or-miss.
I think that the x10a has something different going on than the x10i.
Trip noticed a difference over in da neederlands with a x10a replacing his x10i.
Dunno what it could be.
Click to expand...
Click to collapse
Didnt work :/ okay so i wipe everything, flash the rom, then flash this? and continue with the steps on the launcher, browser, etc?
Or should i change my baseband?
Try changing to BB67 first. Then if it still doesn't work, then I'd try the wipe.
Are you using a custom kernel?
Im on EWJET using: FINAL and STABLE REALEASE(no WLOD and still performance improved) - ewX.tweaks.xkernel.X9e zKernel | 2.6.29
shawayne21 said:
I cant send texts on my x10a after rooting and flashing TW V008 ROM. It just stays at sending. I cant recieve any either. Any help?
Click to expand...
Click to collapse
I had the same problem... Same ROM, same BB... The solution I foud as we have an x10a was flashing BB 55... The ROM runs smooth and with that my problem was solved... Try it...
andrewddickey said:
... AT&T is a ***** with the SMS on custom ROMs. Kinda hit-or-miss.
I think that the x10a has something different going on than the x10i.
Trip noticed a difference over in da neederlands with a x10a replacing his x10i.
Dunno what it could be.
Click to expand...
Click to collapse
Really? I never noticed an issue with my MMS on AT&T... As long as you are on a baseband your ROM will recognize (or you use the baseband patch) you should be fine.
My advice would be to check your baseband (options>about phone) and make sure it is one your ROM is ok with (check the ROM's thread).
oalf170892 said:
I had the same problem... Same ROM, same BB... The solution I foud as we have an x10a was flashing BB 55... The ROM runs smooth and with that my problem was solved... Try it...
Click to expand...
Click to collapse
Thanks a BUNCH. this saved meee
and thnks to andrew for helping too
wrong section
shawayne21 said:
Thanks a BUNCH. this saved meee
and thnks to andrew for helping too
Click to expand...
Click to collapse
im havin the same problem/ so you downloaded baseband 55 for x10A ? or x10I
lams09 said:
im havin the same problem/ so you downloaded baseband 55 for x10A ? or x10I
Click to expand...
Click to collapse
dude, why don't you think about it ? x10a obviously. you have an x10a, so you flash x10a firmware. if you have an x10i, you will flash x10i fw.
now OT: MODs, please move.
phillu97 said:
dude, why don't you think about it ? x10a obviously. you have an x10a, so you flash x10a firmware. if you have an x10i, you will flash x10i fw.
now OT: MODs, please move.
Click to expand...
Click to collapse
No need to be like that.
I've run all sorts of firmware on my x10a. (were also talking about basebands, not firmware) It's not like there is a definite and obvious solution for these problems as you try to make it sound. Not all ROMs are compatible with x10a basebands and vice-versa with x10i.
Move to proper forum.
R u on bb 52?
Sent from my x10 on gingerbread
Try flashing a new baseband
Sent from my x10 on gingerbread
If ur using bb65 on a custom Tom it wont work
Sent from my X10 TripNMiUI-Iris using XDA App
I using x10i and I tried all baseband but the most it's able to send is only 2 message length. Any help?
Hi, my new X10 Up to 2.3 then I met this strange disease, who knows his help only slightly:
- Affter Up to fw 2.3.3 stock, Xperia X10 always crashes and reboots when using GoogleMaps with 3G, whereas before when in FW 2.1 does not have this phenomenon.
- Tried a few RomCook WB, TW ... similar problems also
please people help me!
cunhetkhe said:
Hi, my new X10 Up to 2.3 then I met this strange disease, who knows his help only slightly:
- Affter Up to fw 2.3.3 stock whenever it uses GoogleMaps with 3G were Reboot, whereas before when in FW 2.1 does not have this phenomenon.
- Tried a few RomCook WB, TW ... similar problems also
please people help me!
Click to expand...
Click to collapse
Hi, welcome to XDA developers!
I'll try and help as much as possible...
Which kernel are you on? Stock or some custom kernel?
Thank you, I use Stock Rom, I thing it's Stock kernel. I tried to test many of the original Rom but the situation has not improved.
Another problem is that after many tests, I found only when using GoogleMaps with 3G, the machine I was reboot, if used with wifi is fine. So is 3G is the problem? but I still surf the Web using 3G normally without any problems. Hope your help!
cunhetkhe said:
Another problem is that after many tests, I found only when using GoogleMaps with 3G, the machine I was reboot, if used with wifi is fine. So is 3G is the problem? but I still surf the Web using 3G normally without any problems. Hope your help!
Click to expand...
Click to collapse
Hi, it might be baseband problem, maybe baseband .71 isn't for you... Try this:
9Lukas5 said:
- Baseband 2.1.67
- smsBB67 patch
- Kernel upgrade
flashing procedure:
-The baseband and the kernel upgrade must be placed in the firmwares folder from flashtool and the sms patch on to the sdcard.
-After you have flashed the rom and the xrecovery now also flash the sms patch before remove the battery.
-In Flashtool flash first the 2.1.67 Baseband, after flashing finished, remove usb cable and select the kernel upgrade and connect the usb again when flashtool asks.
-After both (bb and kernel upgrade) flashed, you can remove the usb-cable and power on the device with everything working on bb 2.1.67.
Regards,
L[/COLOR]
Click to expand...
Click to collapse
I haven't tried this yet, if it doesn't work let me know.
Prodigy said:
Hi, it might be baseband problem, maybe baseband .71 isn't for you... Try this:
I haven't tried this yet, if it doesn't work let me know.
Click to expand...
Click to collapse
Many thanks to you, I will try to follow your instructions and will report results
"smsBB67 patch" installed by Xrecovery ?
cunhetkhe said:
"smsBB67 patch" installed by Xrecovery ?
Click to expand...
Click to collapse
Yep now flash bb67 via flashtool.
After that you will need to flash Kernel UpGrade.
If you need help with flashtool you can ref here:
http://forum.xda-developers.com/showthread.php?t=928343
Sent from my X10i using Tapatalk
I have followed your instructions and now my phone has Baseband67 but it still reboot when I use Gmaps with 3G.
You have no other way to fix this problem? please help me
Hi bro, sorry I'm afraid i got no other method to work... you'll might have to use 2.1 firmware ...
Sorry, can't help you
Anyway, enjoy your stay at xda and hope you find a workaround soon.
Anyway thank you also, hope to have another bro in the forum will find a way to fix this condition.
Prodigy said:
Hi, it might be baseband problem, maybe baseband .71 isn't for you... Try this:
I haven't tried this yet, if it doesn't work let me know.
Click to expand...
Click to collapse
My phone is X10a, I've flash the rom 2.3 of X10a and then I flash baseband .67 as your guide and was successful, I have cured this disease. My X10 was running fine. Thank you again. (earlier I just flash the Rom 2.3 of X10i )
Hi
This weekend my x10 mini pro turned of by itself and when it started up again the touchscreen never worked again.
I tried factory reset, dalvik cache clear, data clear, all of it. Reinstalled my MiniCM7Pro rom. Still no luck.
PLEASE help me if you can...
Thanks
And I just tried to install another ROM, still not working
Going to try original now
edit: (check edit 2)
Ok I cant use SEUS to repair my phone back to the original, since the phone needs to be connected to PC Companion, and I need the touchscreen for that...
What now?
Does anyone have the ROM for me so that I can install using xrecovery?
edit 2:
So looks like stock 2.1 rom works (but doesnt have dual touch)
It seems that the dual touch module/driver doesnt work on my phone anymore, where can I find an alternative touch module/driver for MiniCM7Pro v21?
Any help is greatly appreciated.
Hey Mate!!! Are you using SE Update Service or PC Companion?
Yashu1019 said:
Hey Mate!!! Are you using SE Update Service or PC Companion?
Click to expand...
Click to collapse
Hey, no I used a stock SE 2.1 ROM I found here on XDA.
Now the phone is working 100%
BUT... I would like to install a custom ROM again, and I found MiniCM7Pro V21 to be the best/most stable. But all of a sudden the screen doesn't respond when touching it when I'm using that ROM (Same for CM6)
I am also facing the same issue....
Haven't found a solution yet though...
I guess we are stuck with the stock rom for now
Hope so somebody would find a solution to this problem...
Try fllashing any other rom.....i also had sme issue...i flashed cyancream still it didnt work,then minicm7pro still no touch response then finally I flashed stornmix and touchscreen was back again.....
Sent from my U20i using XDA App
abhay274 said:
I am also facing the same issue....
Haven't found a solution yet though...
I guess we are stuck with the stock rom for now
Hope so somebody would find a solution to this problem...
Click to expand...
Click to collapse
Yashu1019 said:
Try fllashing any other rom.....i also had sme issue...i flashed cyancream still it didnt work,then minicm7pro still no touch response then finally I flashed stornmix and touchscreen was back again.....
Sent from my U20i using XDA App
Click to expand...
Click to collapse
Well i decided I'm not going to settle for stock 2.1 ROM, and installed the nAa kernel.
Then reinstalled MiniCM7Pro V21 and it worked.
However wifi did not work.
Now I am running MiniCM7-2.1.9 and everything works so far.
I would still like to revert back to MiniCM7Pro, since it was my absolute favourite ROM!
Minicm7pro does not hve wifi built from sources...so wifi wont work with nAa kernel..
Sent from my U20i using XDA App
Yashu1019 said:
Minicm7pro does not hve wifi built from sources...so wifi wont work with nAa kernel..
Sent from my U20i using XDA App
Click to expand...
Click to collapse
Is there a way for me to include it in the ROM myself?
Eg: just copying the wifi files into the rom before installing?
Copying files wont solve your wifi issue..u can use zombiepanic kernel, or d4 kernel with minicm7pro....i thnk wifi works with these kernels
Sent from my U20i using XDA App