Please HELP my X10 2.3.3 - XPERIA X10 Q&A, Help & Troubleshooting

Hi, my new X10 Up to 2.3 then I met this strange disease, who knows his help only slightly:
- Affter Up to fw 2.3.3 stock, Xperia X10 always crashes and reboots when using GoogleMaps with 3G, whereas before when in FW 2.1 does not have this phenomenon.
- Tried a few RomCook WB, TW ... similar problems also
please people help me!

cunhetkhe said:
Hi, my new X10 Up to 2.3 then I met this strange disease, who knows his help only slightly:
- Affter Up to fw 2.3.3 stock whenever it uses GoogleMaps with 3G were Reboot, whereas before when in FW 2.1 does not have this phenomenon.
- Tried a few RomCook WB, TW ... similar problems also
please people help me!
Click to expand...
Click to collapse
Hi, welcome to XDA developers!
I'll try and help as much as possible...
Which kernel are you on? Stock or some custom kernel?

Thank you, I use Stock Rom, I thing it's Stock kernel. I tried to test many of the original Rom but the situation has not improved.

Another problem is that after many tests, I found only when using GoogleMaps with 3G, the machine I was reboot, if used with wifi is fine. So is 3G is the problem? but I still surf the Web using 3G normally without any problems. Hope your help!

cunhetkhe said:
Another problem is that after many tests, I found only when using GoogleMaps with 3G, the machine I was reboot, if used with wifi is fine. So is 3G is the problem? but I still surf the Web using 3G normally without any problems. Hope your help!
Click to expand...
Click to collapse
Hi, it might be baseband problem, maybe baseband .71 isn't for you... Try this:
9Lukas5 said:
- Baseband 2.1.67
- smsBB67 patch
- Kernel upgrade
flashing procedure:
-The baseband and the kernel upgrade must be placed in the firmwares folder from flashtool and the sms patch on to the sdcard.
-After you have flashed the rom and the xrecovery now also flash the sms patch before remove the battery.
-In Flashtool flash first the 2.1.67 Baseband, after flashing finished, remove usb cable and select the kernel upgrade and connect the usb again when flashtool asks.
-After both (bb and kernel upgrade) flashed, you can remove the usb-cable and power on the device with everything working on bb 2.1.67.
Regards,
L[/COLOR]
Click to expand...
Click to collapse
I haven't tried this yet, if it doesn't work let me know.

Prodigy said:
Hi, it might be baseband problem, maybe baseband .71 isn't for you... Try this:
I haven't tried this yet, if it doesn't work let me know.
Click to expand...
Click to collapse
Many thanks to you, I will try to follow your instructions and will report results

"smsBB67 patch" installed by Xrecovery ?

cunhetkhe said:
"smsBB67 patch" installed by Xrecovery ?
Click to expand...
Click to collapse
Yep now flash bb67 via flashtool.
After that you will need to flash Kernel UpGrade.
If you need help with flashtool you can ref here:
http://forum.xda-developers.com/showthread.php?t=928343
Sent from my X10i using Tapatalk

I have followed your instructions and now my phone has Baseband67 but it still reboot when I use Gmaps with 3G.

You have no other way to fix this problem? please help me

Hi bro, sorry I'm afraid i got no other method to work... you'll might have to use 2.1 firmware ...
Sorry, can't help you
Anyway, enjoy your stay at xda and hope you find a workaround soon.

Anyway thank you also, hope to have another bro in the forum will find a way to fix this condition.

Prodigy said:
Hi, it might be baseband problem, maybe baseband .71 isn't for you... Try this:
I haven't tried this yet, if it doesn't work let me know.
Click to expand...
Click to collapse
My phone is X10a, I've flash the rom 2.3 of X10a and then I flash baseband .67 as your guide and was successful, I have cured this disease. My X10 was running fine. Thank you again. (earlier I just flash the Rom 2.3 of X10i )

Related

Base Band Patch for Gingerbread roms

Use it when your baseband is 54+ and want to try out J's cm7 rom or rdannar's GB Miui rom or Arc rom.
Tested working on J016 and J017 and rdannar's GB Miui - for stock kernel only.
Do it at your own risk and it's not supported by J
Patch it with cm7bb54.zip
Restore back the original with cm7bb52.zip (if you decide to change base band)
This patch won't solve any problem that may come with the rom (such as wlod)
Note: This patch won't work on Trip's GB Miui
pls hit Thanks button if it helps you
I want to make sure I got this all correct:
1. If on bb.54+, flash cm7bb54.zip to patch/use cm7
2. If previously flashed to bb.52, flash cm7bb52.zip to go back to bb.54+
Would I have to flash each zip file every time I want to go back and forth between each rom?
Thanks cobrato!
1.correct
2. only if you decide to flash bb52 again(for any reason) and still want to use cm7 flash cm7bb52.zip
no. if you are flashing a new rom which requires bb54 and you are on bb54 then no need to flash this zip.
Can use this patch for bb.55 ?
I finally gave in and left FreeX10 to test out CM7.
It feels pretty stable but there's some issues I sense still need tweaking and I'll post after I'm done here.
QQ; what improvements have you sensed using .54 over .52, both in general and with CM7?
Personally i don't think there are any improvements. But some people just want a higher number. In fact some of the functions in .54 are broken like auto-time settings.
realunited123 said:
Personally i don't think there are any improvements. But some people just want a higher number. In fact some of the functions in .54 are broken like auto-time settings.
Click to expand...
Click to collapse
Not correct.....
If you are in north america .49/.52 causes many issues, especially when it comes to dropped calls , failed text messages and slow 3g+ speeds.
On .55 the failed text issue is fixed completely, I get much better call signal and faster 3g+.
fiscidtox said:
Not correct.....
If you are in north america .49/.52 causes many issues, especially when it comes to dropped calls , failed text messages and slow 3g+ speeds.
On .55 the failed text issue is fixed completely, I get much better call signal and faster 3g+.
Click to expand...
Click to collapse
Ok. Never have those issues here.
Sent from my X10i
@cobrato
brilliant job!!!!!
a much needed patch for ppl trying out CM7...
but the custom kernels will not work if u use this... all customs kernels currently available are based on baseband 2.0.52
great work ive ben donne it too but havent time to share it wanted to do it today and i see your post
can u make a patch for bb 49 i wna try it on trip Miui which only works on bb49
I support it for me and you miui Rom...
Sent from my Arc_2.3.1-TMR using XDA App
Thank you so much
Sent from my X10i using XDA App
great stuff
Omfg thanks your awesome dude!
Sent from my X10i using XDA Premium App
Worked on cm7.03 with bb 67 and 360 kernal ;-)
Sent from my X10 using XDA Premium App
Hi, I hope anyone can help me. I have the 2.0.46 Base band, and android 2.1. I can't update it to 2.3 because my usb is broken. The phone it's rooted and I have xrecovery 0.3, it's any way to use a patch and installa a GB room??
Thanks
toninawer said:
Hi, I hope anyone can help me. I have the 2.0.46 Base band, and android 2.1. I can't update it to 2.3 because my usb is broken. The phone it's rooted and I have xrecovery 0.3, it's any way to use a patch and installa a GB room??
Thanks
Click to expand...
Click to collapse
Not without the new kernel, the only way it is possible is if the bootloader gets unlocked
Sent from my x10i using xda premium
toninawer said:
Hi, I hope anyone can help me. I have the 2.0.46 Base band, and android 2.1. I can't update it to 2.3 because my usb is broken. The phone it's rooted and I have xrecovery 0.3, it's any way to use a patch and installa a GB room??
Thanks
Click to expand...
Click to collapse
Your usb port, or usb cable?
You can't install the kernel needed for GB without flashtool.
So if your usb port is broken, maybe look on ebay for spare parts to fix it.
If your usb cable is broken, buy a new one.
Good luck
sorry but how do i apply this patch? i'm on BB54 with a broken usb connector
i guess this might be (all steps via xrecovery)
1.- install patch
2.- install 2.3.3 rom (any rom available)
3.- install custom kernel (zKernel might be)
is this correct?
thanks in advance

[Q] Infinite loop with TripNRaver rom (can't post on dev forum)

Hi, and to begin with sorry I can't post in dev section, no enough messages yet...
So my X10 failed since I tried another rom. Ok, so I went back to X10 2.1 official, then I rooted, installed busbox, xRecovery...
Well, let's try a new rom. I chose the TripNRaver Arc rom 2.3 gingerbread. Then I flashed the .49 baseband as asked in his topic, however I have infinite loop reboot. But it boots to PIN number asked, I see the phone find the network, so I think baseband is not the problem... But I'm not pro.
Any ideas would be appreciated.
Sorry, my English is not perfect since I'm french.
Thank you
dunkerquois88 said:
Hi, and to begin with sorry I can't post in dev section, no enough messages yet...
So my X10 failed since I tried another rom. Ok, so I went back to X10 2.1 official, then I rooted, installed busbox, xRecovery...
Well, let's try a new rom. I chose the TripNRaver Arc rom 2.3 gingerbread. Then I flashed the .49 baseband as asked in his topic, however I have infinite loop reboot. But it boots to PIN number asked, I see the phone find the network, so I think baseband is not the problem... But I'm not pro.
Any ideas would be appreciated.
Sorry, my English is not perfect since I'm french.
Thank you
Click to expand...
Click to collapse
It should crash a few times.
But if it continues to do that you may have the same problem i have.
My x10i won't run that rom at all.
Can you try bb 52?
Try to crash system server a few times. If that's not working you should reflash stock firmware with flashtool, reroot, xrec and so on. Then reflash bb49 and reinstall the Rom. Good Luck
Sent from my CM 6.1.3 v006 using XDA Premium App
dunkerquois88 said:
Hi, and to begin with sorry I can't post in dev section, no enough messages yet...
So my X10 failed since I tried another rom. Ok, so I went back to X10 2.1 official, then I rooted, installed busbox, xRecovery...
Well, let's try a new rom. I chose the TripNRaver Arc rom 2.3 gingerbread. Then I flashed the .49 baseband as asked in his topic, however I have infinite loop reboot. But it boots to PIN number asked, I see the phone find the network, so I think baseband is not the problem... But I'm not pro.
Any ideas would be appreciated.
Sorry, my English is not perfect since I'm french.
Thank you
Click to expand...
Click to collapse
TRy the question and answer section
lifty95 said:
Try to crash system server a few times. If that's not working you should reflash stock firmware with flashtool, reroot, xrec and so on. Then reflash bb49 and reinstall the Rom. Good Luck
Sent from my CM 6.1.3 v006 using XDA Premium App
Click to expand...
Click to collapse
Does it helped???
sent from my x10i CM 6.1.3 v006 undervolted

TripNMiUI "Iris" 1.1.0 Froyo... HELP!!

Hello guys,
I flashed my X10 to [ROM] [25-05] TripNMiUI "Iris" 1.1.0 Froyo, downloaded here in XDA. So, now my phone don't stop rebooting.
There says that custom kernels are not supported, so, I've tried to do it with cutom and stock kernels.
BB version in phone shows "unknown", can be it the problem??
My bb is .52, this rom works on .49 and .52, so it can't be a problem.
Could you help me?
Thanks.
maybe u can try flash your baseband to .49 with flashtool and reinstall trips custom rom with xrecovery?
darkvalance said:
maybe u can try flash your baseband to .49 with flashtool and reinstall trips custom rom with xrecovery?
Click to expand...
Click to collapse
I've tried it now...
In BB .49 x10 don't reboot!! But it don't get network too
sbr.anderson said:
I've tried it now...
In BB .49 x10 don't reboot!! But it don't get network too
Click to expand...
Click to collapse
Try crashing it? Dev tools -> bad behaviour -> crash system server
Sent from my X10 TripNMiUI using XDA App
sbr.anderson said:
I've tried it now...
In BB .49 x10 don't reboot!! But it don't get network too
Click to expand...
Click to collapse
Maybe you should try his older version of 1.0.9 instead
I flashed again with .52 and it half works...
Now 3G data doesn't communicate. =/
Today is not my day... =[
i have this issue aswell even i use crashed the server i still did not get any signal :S
I had the same issue with that rom. I had the use the sony software and restore it, root it, reflash it and import all my apps again. After that all was great.
On the plus side using the phone in standard mode just reminded how much trips roms has made the x10. Without trip and the gang in xda this phone would have been on ebay months ago!
Sent from my X10 TripNMiUI using Tapatalk
sbr.anderson said:
I flashed again with .52 and it half works...
Now 3G data doesn't communicate. =/
Today is not my day... =[
Click to expand...
Click to collapse
i am on BB 52 and it is working great with me
just flash BB52 wipe everything then install the zip file
reboot and leave the mobile for 2-3 min it will reboot by itself , hope it will work with you
hbhtts said:
i am on BB 52 and it is working great with me
just flash BB52 wipe everything then install the zip file
reboot and leave the mobile for 2-3 min it will reboot by itself , hope it will work with you
Click to expand...
Click to collapse
That worked for me and i was in baseband .52 too but i went back to my modded stock ROM because i was receiving a lot of FC with TripnMiUI and the phone was a little laggy too o.o...and i didn't like MiUI that much xDD
Thank you guys... tonight I'll try it again... I hope it works 100% :/
Same problem here.
So... I've tried again, TripNMiUI "Iris" 1.2.0 Froyo! and 3G data doesn't work. =/
Only wifi =[
And FruitNinja game was laggy =/

Cant send text messages?

I cant send texts on my x10a after rooting and flashing TW V008 ROM. It just stays at sending. I cant recieve any either. Any help?
First off you should try posting in the right section
What baseband are you on? Assuming you're on AT&T. Had same issue. Best for me is base band 67 with kernel from 65 (if you're not using custom kernel)
Gimme some more info.
Edit: (dammit Pawnty beat me....)
@Pawny, if youre not going to help, just dont post
And @andrew .. Yes i am on at&t. Im using baseband 2.1.65 .. maybe thats the problem?
shawayne21 said:
@Pawny, if youre not going to help, just dont post
And @andrew .. Yes i am on at&t. Im using baseband 2.1.65 .. maybe thats the problem?
Click to expand...
Click to collapse
Try this.
Flash it in recovery and lemme know if it helps.
If not, then you may want to try a complete wipe and clean install. AT&T is a ***** with the SMS on custom ROMs. Kinda hit-or-miss.
I think that the x10a has something different going on than the x10i.
Trip noticed a difference over in da neederlands with a x10a replacing his x10i.
Dunno what it could be.
andrewddickey said:
Try this.
Flash it in recovery and lemme know if it helps.
If not, then you may want to try a complete wipe and clean install. AT&T is a ***** with the SMS on custom ROMs. Kinda hit-or-miss.
I think that the x10a has something different going on than the x10i.
Trip noticed a difference over in da neederlands with a x10a replacing his x10i.
Dunno what it could be.
Click to expand...
Click to collapse
Didnt work :/ okay so i wipe everything, flash the rom, then flash this? and continue with the steps on the launcher, browser, etc?
Or should i change my baseband?
Try changing to BB67 first. Then if it still doesn't work, then I'd try the wipe.
Are you using a custom kernel?
Im on EWJET using: FINAL and STABLE REALEASE(no WLOD and still performance improved) - ewX.tweaks.xkernel.X9e zKernel | 2.6.29
shawayne21 said:
I cant send texts on my x10a after rooting and flashing TW V008 ROM. It just stays at sending. I cant recieve any either. Any help?
Click to expand...
Click to collapse
I had the same problem... Same ROM, same BB... The solution I foud as we have an x10a was flashing BB 55... The ROM runs smooth and with that my problem was solved... Try it...
andrewddickey said:
... AT&T is a ***** with the SMS on custom ROMs. Kinda hit-or-miss.
I think that the x10a has something different going on than the x10i.
Trip noticed a difference over in da neederlands with a x10a replacing his x10i.
Dunno what it could be.
Click to expand...
Click to collapse
Really? I never noticed an issue with my MMS on AT&T... As long as you are on a baseband your ROM will recognize (or you use the baseband patch) you should be fine.
My advice would be to check your baseband (options>about phone) and make sure it is one your ROM is ok with (check the ROM's thread).
oalf170892 said:
I had the same problem... Same ROM, same BB... The solution I foud as we have an x10a was flashing BB 55... The ROM runs smooth and with that my problem was solved... Try it...
Click to expand...
Click to collapse
Thanks a BUNCH. this saved meee
and thnks to andrew for helping too
wrong section
shawayne21 said:
Thanks a BUNCH. this saved meee
and thnks to andrew for helping too
Click to expand...
Click to collapse
im havin the same problem/ so you downloaded baseband 55 for x10A ? or x10I
lams09 said:
im havin the same problem/ so you downloaded baseband 55 for x10A ? or x10I
Click to expand...
Click to collapse
dude, why don't you think about it ? x10a obviously. you have an x10a, so you flash x10a firmware. if you have an x10i, you will flash x10i fw.
now OT: MODs, please move.
phillu97 said:
dude, why don't you think about it ? x10a obviously. you have an x10a, so you flash x10a firmware. if you have an x10i, you will flash x10i fw.
now OT: MODs, please move.
Click to expand...
Click to collapse
No need to be like that.
I've run all sorts of firmware on my x10a. (were also talking about basebands, not firmware) It's not like there is a definite and obvious solution for these problems as you try to make it sound. Not all ROMs are compatible with x10a basebands and vice-versa with x10i.
Move to proper forum.
R u on bb 52?
Sent from my x10 on gingerbread
Try flashing a new baseband
Sent from my x10 on gingerbread
If ur using bb65 on a custom Tom it wont work
Sent from my X10 TripNMiUI-Iris using XDA App
I using x10i and I tried all baseband but the most it's able to send is only 2 message length. Any help?

[Q] Your help would be greatly appreciated

So I've recently upgraded my Japanese Xperia to Wolfbreak's ulBlDoom Rom
And the base to X10i_3.0.1.G.0.75_only_kernel_baseband.
No this is causing me some trouble, No WiFi... which I think can be fixed by flashing to a different baseband (from what I've read?)
However, I can't get my phone into flash mode because the ROM seems to be blocking me...
So, can someone please tell me, either how to get the Wifi working like this, or how to get in to flash?
Thanks in advance
no you dont have to flash different baseband for wifi to work.
first of all if you have Unlocked bootloader then flash the doomkernel through flashtool.
then,
You have to flash the wifi modules from DoomKernel's thread in CWM and then it will work
theFP said:
So I've recently upgraded my Japanese Xperia to Wolfbreak's ulBlDoom Rom
And the base to X10i_3.0.1.G.0.75_only_kernel_baseband.
No this is causing me some trouble, No WiFi... which I think can be fixed by flashing to a different baseband (from what I've read?)
However, I can't get my phone into flash mode because the ROM seems to be blocking me...
Thanks in advance
Click to expand...
Click to collapse
Wifi is probably because of the kernel. Did You enable USB debugging?

Categories

Resources