hi,
yesterday i downgraded to 1.6 for x10i from 2.1 bluesparks v4, with the flash tool included in the rar.
but when i powered it on it remains stuck before the boot logo with the silent ringer going on.
so i decided to format all with update service... i've done it but it is looped in reboot. i tried also phone repair but same resulst...
battery removed... nothing
so what can i do?????????????
help
Related
i instaled andread 2.3.4 on my xperia x10 mini pro and its now stock at sony ericson logo,how do i fix this?
Like me!
It didn't run too, and appeared always the Sony Ericsson screen. Then, i installed the 2.2 andread version, and it's the best rom i've seen: after repair the spanish keyboard and install my favourite programs, it runs perfectly, the 5 megapixels of the camera work and it doesn't waste a lot of battery
Can you boot into recovery?
If yes, then download some other rom to ur sdcard and flash it with a complete wipe!
If no, then flash it using SEUS!
Hi, I now have the same problem with my x10mini.
I tried to put in the latest cyanogen rom (http://forum.xda-developers.com/showthread.php?t=1051678)
and now I'm stuck at the first logo.
I cannot:
- Reboot/Turn off
- Boot
- Go into CWM using back-button a couple of times.
I can:
-
-
-
At this state, the USB has been both unplugged and plugged while trying to boot it.
I have tried all sorts of keycombinations.
I have tried CWM-installer (since it although puts phone in reboot)
I some how managed to enter the CWM-state 50-100 reboots ago.
Gave up 20 tries later.
I have spammed the back-button while booting both 20 per second and 1 per second.
Nothing works.
I do realize its bricked. The thing I might've done is installed the rom zip two times.
The first try after finally (being unabled to enter CWM in the first place) entering CWM mode to install the rom zip it just wouldnt boot past the bootscreen (this very, much annoying screen I'm stuck at now) so I tried entering CWM mode again, managed to and installed the zip again.
The mistake there might've been that I never reseted the phone before I did the second install.
Am I doomed to throw the phone in the garbage?
Reflash using SEUS
i have'd the same problem and i flash it
Tip: to install andread v7 install sony bread its the same but sony bread 4 is working, i don't know how to install andread but in sonybread install first ver. 3 then install v4
DO NOT WIPE USER DATA
i followed the guide from flashing to generic, then update using pC companion, but when i tried to boot my x10 it vibrates continously
Reflash with Lose Data..
thanks, but how do i do that, reflashing with lose data
I have a Hugh problem now that need someone to help me out!!!
I was use my streak 4-5 months problem-free until around a week ago it start acting weird by some random massages show up, sometime cannot answer the call and randomly reboot so I try factory reset my phone (BUT THAT IS WHERE THE REAL PROBLEM BEGIN) after factory reset my streak freeze up at dell logo screen ,I remove the battery out and reboot it again which is the result still the same, I replete the reboot 5-6 times until I accept the it is brick!!!! after a few days on research I try fastboot it and try to boot into FW 351 (my streak begin with FW 309 out of the box) with somehow cannot boot up (Freeze at dell logo) so I try to go directly to the streakdroid 1.9.1 and it can boot up to the home screen, but after reboot it strucked at boot loop of streakdroid with Dj steve flashing text (it can boot past dell logo) then I try various version of streakdroid including 1.5.1 1.6.0 1.6.1 1.7.0 1.8.0 1.9.0 that notthing boot up so I try simplestreak1.2 witch can boot up and function well with the issue of cannot install app from apk on sd card. try to reboot sometime can boot pass the process but sometime struck at "android" logo of simplestreak loop that need to reflash rom again and when it can pass all the boot process it still have an issue about the apk install and cannot reboot so i try to reflash back official rom 351 and someother version such as 309 318 354 but still no luck at all. All the flashing process going well but it cannot boot pass the dell logo
Help me please!!! because I already fall in love with this big boy and want it back to function so much!!!!!!!!! (sorry for my broken English)
and now situation going worst witch I struck on recovery mode and can boot up into normal one (after install rom and reboot it always show up reboot to recovery mode) but still can go to fastboot mode by quickly press&hold the shutter botton after reboot
The internal SD card on your streak may be bad.
To find out start fastboot mode.
When you have the small touch pad on the right enter *#301#
This will start a internal test of the SD Cards. Everything should pass.
If it fails you need to replace the internal SD card.
I had this issue before and that is what the problem was for me.
Hey All,
I was trying to install GingerStreak 2.4.4 from GingerStreak 2.4.3.
http://forum.xda-developers.com/showthread.php?t=1333010
According to the instructions, I flashed
amss.mbn - http://mirror2.streakdroid.com/amss.mbn
and
dsp1.mbn - http://mirror2.streakdroid.com/dsp1.mbn
(got both the files from the first link above)
Then when I tried to reboot into Bootloader (Power+Vol Up+Vol Down) but nothing happens apart from the Dell logo being displayed.
I try to boot normally, still stuck at the Dell logo. The phone never even reaches the boot animation.
I try to go boot into fastboot (power+camera key)mode, but the phone never even boots. The screen stays off, so do the LED lights.
I figured out that the files downloaded above were incomplete(due to slow speed Chrome showed incomplete files as download complete).
amss downloaded: 111KB. Actual Size: 15.41MB
DSP1 Downloaded: 250KB. Actual Size: 8.94MB
So, I flashed the wrong files.
Now, I guess, the phone is bricked big time.
I need big time to get into fastboot mode (to flash the correct files) or anyhow get my phone working.
Guys, need help. Please help me out and get this issue sorted out.
I don't know the details but search for instructions on either streakflash or qdl tool. That may get you back.
Sent from my Dell Streak using Tapatalk
This is what got my streak back to life:
http://forum.xda-developers.com/showpost.php?p=21178746&postcount=11
any luck?
supersophisticated said:
Hey All,
I was trying to install GingerStreak 2.4.4 from GingerStreak 2.4.3.
http://forum.xda-developers.com/showthread.php?t=1333010
According to the instructions, I flashed
amss.mbn - http://mirror2.streakdroid.com/amss.mbn
and
dsp1.mbn - http://mirror2.streakdroid.com/dsp1.mbn
(got both the files from the first link above)
Then when I tried to reboot into Bootloader (Power+Vol Up+Vol Down) but nothing happens apart from the Dell logo being displayed.
I try to boot normally, still stuck at the Dell logo. The phone never even reaches the boot animation.
I try to go boot into fastboot (power+camera key)mode, but the phone never even boots. The screen stays off, so do the LED lights.
I figured out that the files downloaded above were incomplete(due to slow speed Chrome showed incomplete files as download complete).
amss downloaded: 111KB. Actual Size: 15.41MB
DSP1 Downloaded: 250KB. Actual Size: 8.94MB
So, I flashed the wrong files.
Now, I guess, the phone is bricked big time.
I need big time to get into fastboot mode (to flash the correct files) or anyhow get my phone working.
Guys, need help. Please help me out and get this issue sorted out.
Click to expand...
Click to collapse
any luck on reiviving your phone? got the same issue. can't get pass dell logo.
Its very rare that a streak actually dies. Correct me if im wrong.
By reading through this forum 99% of the time you can find the answers to your problems.
Use Streak Flash tool to recover your device.
Uh, so I've been having a few problems trying to unlock the bootloader on my X10 and I came to some problems:
1. When I first connected my phone with the USB cable, the FlashTool showed that my phone had debugging mode off even though I checked it and it was on!
2. I ignored this problem and decided to try unlocking the BL anyways. When I shut down my phone, held the back button and plugged the USB cable to put the phone into Flashmode, after 10-20 seconds it would automatically reboot itself and get my phone out of Flashmode, making me unable to flash Kernel Downgrade!
3. This time I trained my fingers and tried to flash Kernel Downgrade before my phone started to reboot itself and I succeeded. But now that I flashed it, the next step for unlocking says
"disconnect usb cable, press power button until phone vibrates shortly and immidiatly connect the usb cable again (it is supposed to be stuck at SE logo)"
but the problem is that my phone won't go anywhere after the Sony Ericsson text (not the logo with the circle and stuff where it's supposed to)
I am using (or at least was using until I flashed Kernel Downgrade) DoomLord's Kernel v6 and ViolentOS ROM. I have also tried restoring the xRecovery backup I made exactly before starting the flashing, but it still won't work, the phone always gets stuck on the Sony Ericsson text. What am I supposed to do?!
What logo with the circle?? That's the boot animation, loaded when system is already running. It is supposed to be stuck at the first screen, that's when system starts loading kernel and can't with "wrong" baseband.
Sony Ericsson text is WHERE it has to be stuck.
Also, at least for me, I couldn't do unlock without 2.1 rooted system installed, had to flash baseband and system, then unlock and then restore my 2.3 backup.
New Problem
kalte said:
What logo with the circle?? That's the boot animation, loaded when system is already running. It is supposed to be stuck at the first screen, that's when system starts loading kernel and can't with "wrong" baseband.
Sony Ericsson text is WHERE it has to be stuck.
Also, at least for me, I couldn't do unlock without 2.1 rooted system installed, had to flash baseband and system, then unlock and then restore my 2.3 backup.
Click to expand...
Click to collapse
@kalte The logo with the circle is the animation that comes after the text.
But forget what I said. I'm trying to boot the phone and it's not working. I disconnected the USB and took off the battery then put the battery back in to see if it could boot. It's stuck at the text even though I restored everything with an xRecovery backup. Is this because of the Kernel Downgrade?
FIXED IT!
I'm such an awesome person! Just had to flash the Generic Kernel Upgrade. Everything is working, with my previous settings and all.
Tried Unlocking X10i .. getting stuck at the SE logo
I used the following method to unlock my phone bootloader:
http://forum.xda-developers.com/showthread.php?t=1254087
I successfully unlocked the bootloader. But now its taking forever to load. Its getting stuck at the SE logo.
Please help !!!
thejassk said:
I used the following method to unlock my phone bootloader:
http://forum.xda-developers.com/showthread.php?t=1254087
I successfully unlocked the bootloader. But now its taking forever to load. Its getting stuck at the SE logo.
Please help !!!
Click to expand...
Click to collapse
Flash Stock Firmware of your region using flashtool, to get you phone back to life. & try unlocking your bootloader using Flashtool.
PS- Flashtool never disappoints me.
So Ive been on M&M Miui Rom for the past 6 months with no problems. Just this morning tho, I received a call, and as soon as I hung up, phone froze. No biggie... Pulled out the battery, pop it back in, and it wouldn't boot. It gets stuck at the boot screen logo (i was on ckernel at the time) and in about 5 secs screen goes blank and and WLOD appears, and goes into a boot loop. I then flashed other kernels but with no luck (I have unlocked boot) I also tried to connect it back to PC Companion but wont read it. I also flashed the locked boot tft and pc companion still wont take it Any ideas on what I can do?!!?
ratmkicksass said:
So Ive been on M&M Miui Rom for the past 6 months with no problems. Just this morning tho, I received a call, and as soon as I hung up, phone froze. No biggie... Pulled out the battery, pop it back in, and it wouldn't boot. It gets stuck at the boot screen logo (i was on ckernel at the time) and in about 5 secs screen goes blank and and WLOD appears, and goes into a boot loop. I then flashed other kernels but with no luck (I have unlocked boot) I also tried to connect it back to PC Companion but wont read it. I also flashed the locked boot tft and pc companion still wont take it Any ideas on what I can do?!!?
Click to expand...
Click to collapse
Why don't you try to get back to stock firmware by flashing it through flashtool.?
Sent from my X10
Or try to reflash Rom via Recovery or Flashtool.
Sent from my X10s using xda premium
Please read up on recover from soft brick.
Normally flash 2.1 stock and go from there. If flashtool won't find phone, start flash process without connecting phone until prompted then remove battery and replace while holding the back button then connect to pc
~Jaramie
from my LT28at, rooted and eating an Ice Cream Sandwich