Related
I am sorry to disturb you but I have a big problem with my x10.
I explain: I was on xRecovery and inconveniently clicked on " system format" I had not realized it at the beginning, so then I clicked on "reboot" then my x10 does not work, it stays on the "Sony Ericsson" screen at boot.. and I can't have any access to xRecovery with the back button.
I do not know what I can do for fix my error...
Please help me
ps: I use the last froyo beta 2 of zdzihu
Reflash with seus.
THANK YOU SO MUCH!!!!!!!
You save my phone =)
I have a same problem.
I turn out battery and wait one min,than turn back (phone is off yet)
Then put cable in PC
than press the back button and turn the usb to phone.
Keep pressed back button and sonyericcson logo is appeir. (lamp is green)
If I go to keep the back button when SE logo show, than show battery icon to charge on the screen (lamp is orange)
If I stop to hold the back button when SE logo show, then moving into classical ignition and stop asking me the network key sim ...
I done know what is a network sim...
I note that my phone worked just fine on version 1.6 and am no network key is not looking ... All this happened when it decreased the Nordic flash 2.1 ..
When I try the SEUS to do a restore says it is not possible to throw an error ...
The mods x10i
Firmware - 2.1 update1
Baseband - 2.0.46
Kernerl 2.6.29 SEMCUser @ SEMCHost # 1
Build 2.0.A.0.504
Can I go back to version 1.6 or put some other firmware, if we will be doing.
Now I use phone only on mp3
heeeeeeeeeeeeeeeeeeeeeelp
XperiaX10iUser said:
Reflash with seus.
Click to expand...
Click to collapse
itdoesn't work for me plz help
Just flash with FlashTool a clean full firmware, its very easy
http://forum.xda-developers.com/showthread.php?t=920746
Greettings
I had the same problem with xRecovery.
before I put the beta 2, I have made a backup with xRecovery to save my 2.1 [Eminence v1.2]
then I stucked with SE white logo, I pulled the battery out, rebooted and went back to xRecovery..
so If you didn't made any backup, use Flash Tool or reflash.. same thing, same result
Alejandrissimo said:
Just flash with FlashTool a clean full firmware, its very easy
http://forum.xda-developers.com/showthread.php?t=920746
Greettings
Click to expand...
Click to collapse
That doesse nt work for me. The phone cannot go in to the flash mode...
I'm dead, techyyy, plz help?
Downloaded flash tool and cannot work, just the logo there and i can't do anything, not mount it into flash mode....BOOT LOOP!!!
Stuff xRecovery, Crap my phone! Not gonna use it again!
Help!!
SEUS
Just download the Sony Ericsson Update Service - SEUS - Run it - follow the prompts - force a system restore - it will work.
http://www.sonyericsson.com/cws/support/softwaredownloads/detailed/updateservice/xperiax10?cc=gb&lc=en
Hold the back key while putting in the battery, cable already connected and SEUS running - your looking at the bootloader saying - no firmware - so load one onto it and your good!
Thanks man, its all working
Thanks
Aussies are awesome
finally fixed
btw im melbourian too
please help me
i was updating my x10 via pc companion and then i accidentally pull off the cable and now my x10 doesnt work anymore.
is my x10 bricked already? how can i fix this?
THANKS!
You can use Update Service to fix it
you need to flash your phone,i had the same problem and was worried my phone was dead,it should work,let me know if you have trouble
ice_pick88 said:
please help me
i was updating my x10 via pc companion and then i accidentally pull off the cable and now my x10 doesnt work anymore.
is my x10 bricked already? how can i fix this?
THANKS!
Click to expand...
Click to collapse
The X10 is impossible to brick, that is about the only good thing with the locked bootloader that SE uses.
You should be able to resolve your problem by starting PC companion agian, and follow the instructions as you did the first time (when you pulled the cable). When inserting the USB while holding the back-key down the phone enters flash mode, this flash mode does not get overwritten when flashing the android OS, so even if the OS is corrupted the flashmode still works, and can be used to rewrite a fresh copy of android to your phone.
Its an easy fix,flash the phone on flash tool
Sent from my X10i using XDA App
Use flash tool on PC not xrecovery
Sent from my X10i using XDA App
Hello all. I have a quite big problem. After I tried to change the Baseband+Kernel on my x10 for flash a ROM, my phone doesn't want to boot.
When I turn on the phone, it simply show a green led one time and doesn't boot. Any ideas ?
Flash it back from stock room, repair with PC Companion.
Had the same problem many hours ago.
Just enter xrecovery, restore any ROM, flash a SE 2.1 ROM from SEUS or PC Companion ( Repair option ), and try again.
This time, after flashing any Ginger ROM, wait 30 sec and then flash FTF. Turn on phone and thats it.
The problem is that I can't simply boot and then I can't go to xRecovery. And Pc Companion says me that there is no version for my phone with the repair function
And flash a ROM with flashtool doesn't make anything
Hi,
Last night, i tried to root my Xperia x10i phone, following the steps in this article:
http://forum.xda-developers.com/showthread.php?t=711907
After completing the 1st step, i tried to boot my phone. I get the usual vibration when booting, and after a second or two, the phone had started vibrating endlessly.
Then i tried to recover it using PC Companion (Connected in flash mode). It downloaded the firmware and installed it to the phone flawlessly.
I disconnected the phone, in switch on. Get the usual vibration, and then the screen backlight starts to turn on and off constantly. As the PC Companion says this could happens for a few minutes at first boot after update, i waited, but it simply remains doing the same thing, and never show the SE logo.
I tried to repair again, this time using SEUS, following all the instruction, with same result.
I dont know what else can i do... Please Help!!!
this will help you http://www.youtube.com/watch?v=HmX-IYNYqL8
You mean try to flash it to 2.1? Or to 1.6?
flash it to 2.1
Ok. I've just tried to flash with a 2.1 x10i generic rom and a 2.3 x10i generic rom, following the steps in the video. Dont work...
hmm.. weird, any1 can help here?
Yesterday, i left the phone in the office, with the battery out, hoping that something i read in a forum, about this could work, was true. Today i take the phone, put the battery back, and turn on the phone, and... No luck... My xperia is still dead...
Try using SEUS instead of PC Companion.
Follow the instructions ins SEUS and make sure that the phone is off and hold down the BACK button before you plug in the USB cable and make sure you keep it pressed down until the software tells you otherwise.
I've done so, but still dont work... But i'll try again...
I've just tried with SEUS, which download the 2.3 update. SEUS run all the way, and says disconect and turn on. Same result...
Any sugestion?? I almost give up on this... =(
I have the same problem, i have tried to flash my phone like 30 times i have bought a new battery and still no go, it continuasly vibrates.
And i don't even have to pres the back button to put it to flash it always on startup stayes in flash mode.
i hv diff problem , i m stuck on sony ericsson text phn isnt even booting
nw
i hv tried this one and tbhaaanmmmmm ITS FINE NOW
http://forum.xda-developers.com/showthread.php?t=1196421&highlight=root+2.3.3
Nope done that and nothing it only vibrates and doesn't stop
I recently found a thread that I posted this question to, but I did not get an answer, so I'm posting it here, for a bigger audience.
I was trying to install an another rom to the X10 Mini with clockworkmod installed. When the installation finished, cwm said that its installation had been damaged. I selected the option to fix the problem and after that the phone just restarted and went broken.
My phone doesn't even show the boot animation, it just has the sony ericsson logo, it doesn't stay off and when restoring with flashtool I get the message Error flashing. Aborted.
First, the phone stays in the flashing mode only when I keep the back button pressed, but after a failed flashing attempt it stays in the mode (without pressing the back key and with the green led on) and when I try flashing again, it fails after a while.
What would this be about? And what can I do to recover my X10 mini?
Do you happen to know if there's a confirmed working flashtool for the 2.1 update and x10 mini (not pro) OR another failsafe method to fix the phone somehow when even the recovery doesn't work?
Have you tried SEUS?
Restore your phone using Pc Companion or seus and then read every instruction 20 times, before doing anything. The only reason for errors is that you didn't do everything right.
Hi!
I have a big problem that was caused by my own stupidity. I tried updating my phone to CM9, but I didn't install the nAa kernel first. What I have now is a phone that is completely useless. I can't enter CMW recovery, the phone doesn't stay in flashmode, it does enter, but then it just proceeds to the bootscreen with the Sony Ericsson logo. From there, I can't enter recovery, and I can't even turn off the damn thing.
So basically I can't recover my previous firmware, I can't reflash the phone, I can't do anything! Please, help!
Thanks in advance!
Clewer
Well, I tried a gazillion times, and I was finally able to enter SEUS, and start updating, I'll update you guys on the progress!
clewer said:
Well, I tried a gazillion times, and I was finally able to enter SEUS, and start updating, I'll update you guys on the progress!
Click to expand...
Click to collapse
It should work with SEUS or the repair option in pc companion. good luck