I will start off by apologizing for my ignorance, but I am new to rooting. I have had my Atrix for i guess a month or two now and I am wanting to root it. I just dont know where to start for rooting I've read that superoneclick isnt good to use and I tried aRoot but when i opened titanium backup it is saying it isnt rooted. Does anyone else have links to other threads helping with rooting or a Faq or tutorial on how to? Im not sure how to even get the files onto my phone and such and help will be greatly appreciated thank you all very much!
the superoneclick and aroot threads have all of the info you need to root your phone. if you cannot manage to do it by following the instructions already provided i really dont think you should be messing with your phone. they are basically one click solutions. i have tried both and they worked as described. you might want to go to youtube and watch videos of it being done
hondaguy said:
the superoneclick and aroot threads have all of the info you need to root your phone. if you cannot manage to do it by following the instructions already provided i really dont think you should be messing with your phone. they are basically one click solutions. i have tried both and they worked as described. you might want to go to youtube and watch videos of it being done
Click to expand...
Click to collapse
Ive done super one click and it stops doing anything at psneuter so idk what to do about that and ive dont aRoot and it installs superuser and everything go through the process and says its rooted but when i opend titanium backup to verify that it is rooted it says it is not...That is not my fault.
Hxcmetal said:
Ive done super one click and it stops doing anything at psneuter so idk what to do about that and ive dont aRoot and it installs superuser and everything go through the process and says its rooted but when i opend titanium backup to verify that it is rooted it says it is not...That is not my fault.
Click to expand...
Click to collapse
Either you didn't enable Debugging or you're running 4.1.57.
NoNameAtAll said:
Either you didn't enable Debugging or you're running 4.1.57.
Click to expand...
Click to collapse
Ah Im running 1.57...actually didn't know that affected it. tonight im going to attempt to flash back to 1.26
Hxcmetal said:
Ah Im running 1.57...actually didn't know that affected it. tonight im going to attempt to flash back to 1.26
Click to expand...
Click to collapse
Good luck. Just make sure to use a short filename if you have problems with RSDLite. Some people aren't able to flash because of that. I was one of them but it flashed just fine.
Enable Wifi and enter your MotoBlur ID and you'll be able to go ahead and root on 1.2.6. Then you can check for updates and run the update. Use GladRoot as there's a rooting batch file, as well as another file to run after you upgrade. It also enables Sideloading (non-market apps) as well as tethering if you so wish.
If you can get ADB working then you won't have any trouble.
bongd said:
Good luck. Just make sure to use a short filename if you have problems with RSDLite. Some people aren't able to flash because of that. I was one of them but it flashed just fine.
Enable Wifi and enter your MotoBlur ID and you'll be able to go ahead and root on 1.2.6. Then you can check for updates and run the update. Use GladRoot as there's a rooting batch file, as well as another file to run after you upgrade. It also enables Sideloading (non-market apps) as well as tethering if you so wish.
If you can get ADB working then you won't have any trouble.
Click to expand...
Click to collapse
This seems so much more difficult than jailbreaking haha
Hmmm well Im going to try and get this to flash back before i worry about rooting -_-
This is a fantastic guide, I highly recommend it:
http://forum.xda-developers.com/showpost.php?p=12631216&postcount=2911
So, I am new to this site and to the android community. I apologize if I sound stupid to any of you but if you aren't going to help I'd appreciate it if you just ignored me.
Anyway, I got my Atrix a couple days ago on AT&T and started learning about rooting and such. Everything on it is still stock, last night I upgraded to Gingerbread from Froyo and I'd just like to know if there's any specific rooting program, method I can use right now for 4.5.91 Also, when I upgraded I lost my music player widget, is there I can get it back without going back to Froyo?
Follow the procedure in the second link in my signature. Since you had root before you updated go into settings manage applications clear app data for superuser.
Sent from my MB860 using XDA App
phobos512 said:
Follow the procedure in the second link in my signature. Since you had root before you updated go into settings manage applications clear app data for superuser.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
will there be any severe consequences if I screw up?
Use gingerbreak.
Sent from my MB860 using XDA App
TheToiletSpaula said:
Use gingerbreak.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
I've read that gingerbreak doesn't work with this version. I'll look it up though.
phobos512 said:
follow the procedure in the second link in my signature. Since you had root before you updated go into settings manage applications clear app data for superuser.
Sent from my mb860 using xda app
Click to expand...
Click to collapse
^^^^^ only way to root gb and probably the best way if there are other methods
savier420 said:
^^^^^ only way to root gb and probably the best way if there are other methods
Click to expand...
Click to collapse
cool, just one question. Am I supposed to have the device connected to my computer the whole time? and if not between which steps should I connect/ disconnect it? also, when I put the root.img in the C: folder, do I put the zip file or just the .img inside of it?
phobos512 said:
Follow the procedure in the second link in my signature. Since you had root before you updated go into settings manage applications clear app data for superuser.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
If you are just trying to "root" your phone only, YES, this is the best method.
Thanks for posting this and providing the link in your signature. I was crapping myself reading the other post about how the new updates bricks your phone but no one said if you are just looking to root your stock OTA's you'll be fine. So, thanks again. They should sticky this under "If you are just running stock and want to root without unlocked BL/pudding use this"
PSY0NIC
PSY0NIC said:
If you are just trying to "root" your phone only, YES, this is the best method.
Thanks for posting this and providing the link in your signature. I was crapping myself reading the other post about how the new updates bricks your phone but no one said if you are just looking to root your stock OTA's you'll be fine. So, thanks again. They should sticky this under "If you are just running stock and want to root without unlocked BL/pudding use this"
PSY0NIC
Click to expand...
Click to collapse
Since this is the 1st time I've seen some one say it this way....
If you are just trying to "root" your phone only, YES, this is the best method.
Brand new phone, all stock... just want root.... use gingerbreak?
Sent from my MB860 using XDA Premium App
Hi all,
Renaissance613, can you post if you had success and if you ran into any problems? I have the same setup as you (2.3.4/4.5.91) and I'm nervous about rooting so soon after the update (I just installed it).
Also, I'm wondering if I will have to undo this root when another automatic update gets pushed down, or if it will just unroot like my gingerbreak root did. I don't have/intend to use any ROMs. I like stock phone with phone-pulled updates and rooted.
In any case, thanks for the link phobos512 - and thanks to this community of developers and users. You guys are awesome.
Hambone~
hambone123 said:
Hi all,
Renaissance613, can you post if you had success and if you ran into any problems? I have the same setup as you (2.3.4/4.5.91) and I'm nervous about rooting so soon after the update (I just installed it).
Also, I'm wondering if I will have to undo this root when another automatic update gets pushed down, or if it will just unroot like my gingerbreak root did. I don't have/intend to use any ROMs. I like stock phone with phone-pulled updates and rooted.
In any case, thanks for the link phobos512 - and thanks to this community of developers and users. You guys are awesome.
Hambone~
Click to expand...
Click to collapse
I'm about to try it but I'm still confused about a few things like when exactly to connect or disconnect my phone and what to do after I've entered all the commands on my computer, will it install by itself? This is my first time rooting a phone, and my first time even owning an android so I want to make sure I know exactly what I'm doing
I hear you man, it's nerve wracking to worry that you're going to brick your phone. I did the gingerbreak on the last release and it worked perfectly. I'm sure this method will work fine as well, as you said I just want to be sure I'm doing the right thing for my goal: stock phone/downloaded updates/rooted. Best of luck, and thanks to anyone who gives us noobs some more reassurance.
this is by far the best method to root on gingerbread, but i dont see any reason to root but to only flash custom roms, i only needed root pre-GB to allow non market apps, and the new GB OTA UPDATE allows non market apps, so im pretty happy with wat i got, before i updated to the OTA GB i had BL unlocked and rooted, just flashed back to 1.2.6 to be rid of root and unlocked BL, then just went throught the OTA updates to get to GB and im loving it, dont really care to flash any other custom roms, BUT BEWARE DOING THE OTA TO GB AND UNLOCKING THE BL THEN TRYIN TO FLASH BACK TO A STOCK ROM WILL HARD BRICK SO DO YOUR RESEARCH so if u dont want a hard bricked phone dont do the ota stick to custom roms and ignore all OTA'S
so I got through the fastboot reboot command, phone booted back up automatically, then put the phone into debug. Then typed in the adb shell code and said the specified path could not be found.
Now I was still in the command prompt that said the c:/root
What did I do wrong?
So, adb says it is a bad path?? Do this instead..it is easier and it works -- I did it this way last night!
After "moto-fastboot reboot", once your phone has completely rebooted, go to the Android Market and download and install "Terminal Emulator." Once it is instslled and you have opened it, enter the EXACT SAME commands that you were going to type into the Adb Shell..once again, type in the commands VERBATIM. After the last command, there should be a message saying (in terminal emulator) that it was successful! Congrats, you have achieved root access on the AT&T issued stock Gingerbread 2.3.4 build! I hope it works for you!
~Eric
savier420 said:
this is by far the best method to root on gingerbread, but i dont see any reason to root but to only flash custom roms, i only needed root pre-GB to allow non market apps, and the new GB OTA UPDATE allows non market apps, so im pretty happy with wat i got.
Click to expand...
Click to collapse
I'm very vanilla. I root pretty much entirely for free wireless tethering and being able to delete bloatware.
Hello everyone, I am still a little confused between what will or what will not brick my phone. I appreciate your responses.
I am still in froyo 2.2.2 (firmware 1.8.3), rooted using GladRoot method (rooted in previous firmware, then upgraded to 1.83 and used the AfterUpdate.bat.
I am afraid to do the updrade to GB because after reading a looot of threads here on this I am completely confused on what will brick my atrix and what not. If I upgrade to GB OTA, will that brick my phone? if it doesn't brick it, what does? if I upgrade to GB OTA will I able to root it? what method should I use?
thanks a lot
aroca1978 said:
Hello everyone, I am still a little confused between what will or what will not brick my phone. I appreciate your responses.
I am still in froyo 2.2.2 (firmware 1.8.3), rooted using GladRoot method (rooted in previous firmware, then upgraded to 1.83 and used the AfterUpdate.bat.
I am afraid to do the updrade to GB because after reading a looot of threads here on this I am completely confused on what will brick my atrix and what not. If I upgrade to GB OTA, will that brick my phone? if it doesn't brick it, what does? if I upgrade to GB OTA will I able to root it? what method should I use?
thanks a lot
Click to expand...
Click to collapse
Updating to GB won't brick your phone. After updating to GB you can't down grade to older OS (like the one your on right now) that would brick your phone. So as long as you don't plan on going back to a past OS version (and I don't know why anyone would) you'll have no problems at all. As for Rooting >follow this link< and follow the instructions there after you update to GB. It works perfectly, you don't have to unlock your BL or anything else like that to just have Root on GB. Hope this helps.
Thanks!!! That was the response I was looking for
Now, what method should I use if I were planning to unlock the bootloader?
Also, if something goes wrong and I need to reinstall the upgrade (or better, flash with GB again with a spf file) will that not brick by atrix either?
For Questions about BL Unlocking
aroca1978 said:
Thanks!!! That was the response I was looking for
Now, what method should I use if I were planning to unlock the bootloader?
Also, if something goes wrong and I need to reinstall the upgrade (or better, flash with GB again with a spf file) will that not brick by atrix either?
Click to expand...
Click to collapse
Click on the link below, that thread will give you the answers and files your looking for.
> Click Here <
cant really search for this seeing as i wanted to ask the developer directly but i cant due to new user restrictions but anyway...
i downloaded the generic shell helper from bunny... GSH-RC2.rar to be exact
and my question is will this program be able to disable root regardless of the method used?
before you ask, no i did not root the phone myself and the person that did it for me is out of touch. i do beleive he mentioned Zerg- if that helps at all.
thanks for the help guys
snoballz said:
cant really search for this seeing as i wanted to ask the developer directly but i cant due to new user restrictions but anyway...
i downloaded the generic shell helper from bunny... GSH-RC2.rar to be exact
and my question is will this program be able to disable root regardless of the method used?
before you ask, no i did not root the phone myself and the person that did it for me is out of touch. i do beleive he mentioned Zerg- if that helps at all.
thanks for the help guys
Click to expand...
Click to collapse
Though you don't need to unroot to take the update here are some instruction to unroot.
I don't know if that will unroot you, but I do know that an app called Supersu will.
Step 1. Download SuperSu from the market
Step 2. Delete Superuser.apk from /system/app
Step 3. Open up Supersu and update Su binary.
Step 4. Scroll all the way to the right and go to the bottom
Step 5. Select Permanent Unroot.
Your device will be unrooted!
well the reason is that ever since i had the phone unrooted, it wouldnt allow me to update the phone, as it was installing the update it would say update failed. im not sure if theres a difference between unrooting and "returning to stock" as my cousin put it.
anyway ill get on that right now and see where that puts me.
thank you so much
** actually before i do anything, i wanna clarify if unrooting is the same as returning to stock.
ive never done this before so please bear with me lol, i guess whats most important is that i dont lose the photos i have....contact can just be re-synced on google
snoballz said:
well the reason is that ever since i had the phone unrooted, it wouldnt allow me to update the phone, as it was installing the update it would say update failed. im not sure if theres a difference between unrooting and "returning to stock" as my cousin put it.
anyway ill get on that right now and see where that puts me.
thank you so much
** actually before i do anything, i wanna clarify if unrooting is the same as returning to stock.
ive never done this before so please bear with me lol, i guess whats most important is that i dont lose the photos i have....contact can just be re-synced on google
Click to expand...
Click to collapse
No, unrooting and stock are 2 different things. Unrooting, obviously, just ranges away root privileges. you can think of returning to stock as re-installing windows, like you just bought the phone.
Photos should be fine, a they should be stored on your external SD card. If you are worried about losing your pics, just plug your phone into a computer and copy your pics to your computer.
Sent from my DROID RAZR using XDA
Questions go in Q&A
I did a search for unrooting, but I didn't find exactly what I was looking for. I saw one person asked about restoring to factory defaults, with a reply suggesting to reflash to v10e with the offline LG update method. However, if I haven't actually made any changes, could I just use RunMe_L9.bat again and select the unroot option, then restore to factory defaults? I'm using P769 (T-mobile) on firmware v10e.
Thanks!
If you go into supersu app under settings near the bottom there is a full unroot option.
Tablechair said:
If you go into supersu app under settings near the bottom there is a full unroot option.
Click to expand...
Click to collapse
I see, so as long as I stay on v10e, it's easy to root and unroot as needed? Is everything really that easily reversible? Frankly, I don't know why I would want to constantly root / unroot; I just want to know if it's possible. My experience with rooting on Android has been limited to CM9 on an HP Touchpad thus far.
Yea you can root and unroot as much as you like as far as I know. I've read some people on here getting the 10g update pushed to their phone while they were sleeping though, so I would keep root installed and make sure that voodoo has your root backed up at all times.
Hi, I had local mobile phone shop (since then gone out of business) try to unlock my Atrix 4G when I first bought it. They couldn't find an appropriate code but 'rooted' my phone for free (Superuser installed)! At the time my phone was on Froyo, but some months later upgraded to Gingerbread and successfully unlocked. I have since tried to install a few apps that require a rooted phone but the apps say that my phone is NOT rooted and will not install . I have also tried to install a few apps which will not install as they tell me that my phone IS rooted . I have also tried root checkers, again these tell me that my phone is NOT rooted.
Is this because 'superuser' is still installed on my phone and that the apps sees this?
How do I remove superuser or get round this issue as another phone emporium tells me (over the phone) that factory resetting will almost certainly brick the phone?
P. S. I have tried to search for clues in the forums but being uninitiated in phone hacking terms, I can't seem to find anything related.
Regards, Gareth.
Sent from my MB860 using xda app-developers app
I guess it's possible that some (poorly written) apps consider the phone rooted if there is the Superuser app installed. I'm also guessing the phone got unrooted when you upgraded to GB. I'd trust the root checker apps - if they say you're not rooted, that means you're not (at least not properly). So since you're not rooted, there is probably no way to remove the Superuser app.
I think your best bet is to root the phone yourself. The preinstall method is fairly easy and works on all known phone variants and software versions so it's pretty safe. There are some automatic rooting tools too.
Also, either you misunderstood something (or didn't explain it to them right), or they don't know what they're talking about. Factory reset can't ever brick the phone. I've never heard of such a case, ever.
i never saw apps that will not install because of root %)
and yes, root the phone yourself is the best way to control it instructions are in sticked thread in "Atrix 4G General" forum.
d_A_y said:
i never saw apps that will not install because of root %)
and yes, root the phone yourself is the best way to control it instructions are in sticked thread in "Atrix 4G General" forum.
Click to expand...
Click to collapse
yes me too ,and factory setting will not brick your phone