After changing the theme, i cannot find my sim card and the baseband says unknown. HELP PLEASE!
I think it needs to find the sim card for it to read the baseband,which rom are you using ?
Did you have the appropriate baseband for the rom you installed ?
Same here!
I get the same error. Says Baseband Unknown. No service on lock screen. When I go to search network operators it gives me "Error while searching for networks".
I flashed the 435 x10i baseband .54, but the problem persists. It says my phone is x10a!
I don't know what to do.
Example.. you have some ROM on .49 baseband.. you flash .52 idk. for 2.3.3 by J
Use xrec to install 2.3.3 and you'll get Service and baseband.
HELP!!
I flashed the phone with 0.2.6 Flash Tool, and 2.1.54 (X10i) Baseband. The phone was already rooted.
Flashing kernel.sin
07/052/2011 13:52:09 - INFO - Flashing amss_fs.sin
07/052/2011 13:52:09 - INFO - Flashing dsp1.sin
07/052/2011 13:52:16 - INFO - Flashing fota1.sin
07/052/2011 13:52:17 - INFO - Flashing fota0.sin
07/052/2011 13:52:18 - INFO - Flashing amss.sin
07/052/2011 13:52:30 - INFO - Flashing cache.sin
07/052/2011 13:52:30 - INFO - Flashing finished.
07/052/2011 13:52:30 - INFO - Now unplug the device and power it on
07/052/2011 13:52:30 - INFO - Then go to application settings
07/052/2011 13:52:30 - INFO - turn on Unknown Sources and Debugging
After flashin the phone, I used xRecovery Installer to install custom Rom Dark10 2.1
Info about my phone:
Model Number: X10i
Firmware version: 2.1 update1
Baseband version: 2.1.54
Kernel version: 2.6.29 [email protected]#1
Build number: 2.1.A.0.435
The Rom works, but the it cannot find the sim card and baseband turns to "UNKNOWN"
How do I fix this problem? All I want is a black theme. HELP PLEASE!
Sorry for bringing up this thread I might have the same issue as well..
Wanted to use kx10 CM6.1.1 ROM http://forum.xda-developers.com/showthread.php?t=1055609
So I reflashed 2.1.A.0.435 and then flashed baseband .52.
I kept getting 'Unknown Baseband' and also keeps asking to insert SIM Card..
Tried this: http://forum.xda-developers.com/showpost.php?p=12131561&postcount=1
But doesn't work, maybe someone can reelaborate the procedure here..
same to me. I change BB from 54 to 52. but show unkown
It seems that after I flashed the custom ROM problem solved, maybe it won't work on official firmware, you have to flash custom ROM.
same problem with me . please help me out
superbrowndude said:
I think it needs to find the sim card for it to read the baseband,which rom are you using ?
Did you have the appropriate baseband for the rom you installed ?
Click to expand...
Click to collapse
Have the x10a myself and I purposely left sim card out and it has always reported baseband and other info till now. (because I installed a custom rom and it somehow erased my contacts even from the sim?!? perhaps my imagination or a incorrect sync?) I wanted to use a custom zkernel, so I had to reflash baseband from 2.1.54 to 2.0.54. After the downgrade of baseband it reports unkown, but all other info is reported. All features are working gps,wifi,camera,radio and so on. I just find it agitating is all. I did however uncheck the "wipe user data" in the flashtool. I suspect it is because I have always flashed basebands in the same minor release range, eg: 2.0xx ->2.0xx and 2.1.xx -> 2.1.xx This may or may not help....
http://forum.xda-developers.com/showthread.php?t=1119508
by "wolf" stated on the troubleshooting options that the system server needs to be crashed and or the baseband reinstalled. I have crashed the server part and same unkown, now it has helped before when I wasnt able to get the radio working. I am going to try reinstalling the baseband and see what happens. Since I am using the wolfbreak rom.
Tried reflashing baseband and it didnt work. I did note however with the baseband flashtool "comments/branding" that it is changebaseband and not baseband or repairbaseband. I will post this where I got the kernel, since that is after all where the issue for me started.
new solution
i got the exact same problem now, since this thread is started long ago, is there any solutions yet? , it would help. i will try so that someone could suggest a solution.
edit: i found the solution - download the signal-fix.zip (to fix UnknownBB) and flash it with xRecoovery. Works for all x10 of all FW and Kernel.
Opps..............
Devin-J said:
i got the exact same problem now, since this thread is started long ago, is there any solutions yet? , it would help. i will try so that someone could suggest a solution.
edit: i found the solution - download the signal-fix.zip (to fix UnknownBB) and flash it with xRecoovery. Works for all x10 of all FW and Kernel.
Click to expand...
Click to collapse
Could you post what forum that is from please Thanks
source
Patricks_book said:
Could you post what forum that is from please Thanks
Click to expand...
Click to collapse
extremely sorry. i was browsing through my HDD when i found it. i had it saved it in my portable HDD a few months ago. but i remember i found the mediafire link in a youtube video description and downloaded it from mediafire. i dont think it was from a forum. i will try to search for the youtube vid again and will include the link if i could find it.
btw, it worked for me!
did it work for you?
and what custom rom are you using?
Related
EDIT!!::::
Ok so First of my x10 mini pro was default and its model was U20a, its Build was 2.0.A.0.504 and the baseband was 06...
I then tried bits and peices of things and finally managed to change the model to U20i and have the build change to 2.1.1.A.06 and have the same baseband by using a custom downloaded backup file through xrec...
i couldnt figure out how to get the baseband to XXXXXXX015 so i tested my luck on the flasher that was here: http://forum.xda-developers.com/showthread.php?p=10879507#post10879507
So after a few tries it works
----
will report bugs and problems soon....
----------
Ok So.
Here is the story, i am trying to get my x10 Mini Pro to run this here:
http://forum.xda-developers.com/showthread.php?t=1051678
It is the ROM called: [ROM] Cyanogen Froyo - CM6 latest sources (Version 2.1) fast and stable + Dual Touch
Ok so i know i need to get my baseband to end with 015 so here is my information.
Model Number: U20a
Firmware Version: 2.1-update1
Baseband version: M76XX-TSNCJOLYM-53404006
Kernel Version: 2.6.29 [email protected] #1
Build Number: 2.0.A.0.504
So i tried using SEUS to get my version to be 2.1.1.A.06 so my baseband would be xxxxx015
BUT when i tried updating it said that there is no available updates and that my x10 mini pro is up to date...
Also i live in Queensland in Australia...
---
So how do i manage to get the ROM to run for me if i can not update/flash to that baseband/build... i have tried to follow this here: http://forum.xda-developers.com/showthread.php?t=1040149
But i can not get the flasher to be downloaded, it seems the link is broken of the download has been removed...
If anyone could give me something to work with here, even just ideas and or tips i would be happy, atm i am testing to restore using a 2.1.1.A.06 Build Version Backup... Its working so far, havent rebooted yet...
Ok i had that backup finish, and i am at 2.1.1.A.06 now but my baseband is still the same... *beep* (cursing under breath xD)
Cant find a damn sure fire way to flash the correct baseband... maybe i can find a way for a U20i model version since the previous backup which used the 2.1.1.A.06 build....
Going on a search to see if its easier to flash the 015 baseband
Ok cant seem to find anyway to get the correct baseband version flashed over my model is now U20i, the Build is 2.1.1.A.06 but the baseband is still Baseband version: M76XX-TSNCJOLYM-53404006
I guess that restoring from a restore save wont change the baseband version maybe... but im not sure... my default is stil u20a and is still 2.0.A.0.504
I hate not knowing what to do lolxD
So I have not had any luck in figuring out what to do about my baseband problem but i was playing around with the restore from the custom backup and i found 2.1.1.A.06 to be faster and more responsive than 2.0.A.0.504...
Just about to fix up a personal save of that custom so i have my default and the custom.
Now to wait for someone to help... All i need is to be able to get the Baseband version:M76XX-TSNCJOLYM-53404015 onto my x10 mini pro, instead of its M76XX-TSNCJOLYM-53404006...
So for you guys again, my baseband is M76XX-TSNCJOLYM-53404006 for my 2.0.A.0.504 backup and is also M76XX-TSNCJOLYM-53404006 for the new 2.1.1.A.06 custom backup. For the 2.0.A.0.504 which is my default build number for my default backup, the Model is U20a...
For my custom the Model is shown as U20i.
I have a U20i_2.1.1.A.06_Baseband etc etc file from someone on xda which is as a 7z file and i have no clue what to do now... help plz.......
X10 Mini Pro 2.1 incl. Flashtool
or
[FLASHTOOL GUIDE] HOW TO for n00bies
Ok so i now i have the rom running fine i think on my x10 which was default with the settings firstly stated, i then used a custom back up of 2.1.1.A.06 which gave my phone the U20i model and the needed 2.1.1.A.06 Build
i then found that the baseband could not be implimented properly through a backup and i therefore needed to flash it, my first many attempts failed greatly and i had no clue i then used this guide here and the latest version of the flasher http://forum.xda-developers.com/showthread.php?p=10879507#post10879507
i did not think it would work and to my surprise it did
Ok So far i have found that since i am on 3G i have no way to actually utilize the PHONE aspect of it, and i have also had something go wrong with the draw dock type thing... it wont bring up all of the apps now...
so its not that big of a deal, so atm its good, i have the u20i and the correct build and baseband so yay
but anyway, i still have my default backed up, i have the previous version backed up and the CM6 ROM version so i think that this is all good
although i wish i could get a nice rom which is 3G compatible, and oh oh oh! my cousin can get 4G speeds and still cant get 3G xD
Ok so after some tinkering and some searching and ****, i have found that the baseband is now 015 for all my backups... i will have to find baseband and kernel to flash to my device that will return it to 06
If i had the time to learn how i would see about an all in 1 sort of program which holds all basebands and its coupled builds... it would also root and instal xrecovery etc as other options and that will be about all xD but meh xD
aulterra said:
EDIT!!::::
Ok so First of my x10 mini pro was default and its model was U20a, its Build was 2.0.A.0.504 and the baseband was 06...
I then tried bits and peices of things and finally managed to change the model to U20i and have the build change to 2.1.1.A.06 and have the same baseband by using a custom downloaded backup file through xrec...
i couldnt figure out how to get the baseband to XXXXXXX015 so i tested my luck on the flasher that was here: http://forum.xda-developers.com/showthread.php?p=10879507#post10879507
So after a few tries it works
----
will report bugs and problems soon...
----------
Click to expand...
Click to collapse
How did you get to U20i? I actually have to do the opposite! Can you guide me through going from U20i to U20a??? I have read so much my brain is beginning to melt but I'm just not getting anywhere! :crying:
I need something in U20a to enable options in the baseband so it will work in Canada. I bought the stupid thing on eBay and didn't realize there were 2 versions of this phone.
Hi there. I am advised to with this rom and nAa 11 (kernel). I see it's good advice since there is a lot of people enjoying this rom. However today when i checked rom installation requirements i noticed somethig.
Here: http://forum.xda-developers.com/showthread.php?t=1415026
They say that phone need to have:
Requirements:
Latest 2.1.1.A.0.6/2.1.1.C.0.0 SE firmware / Baseband: M76XX-TSNCJOLYM-53404015
But my phone is:
firmware 2.0.A.0.504 and baseband is
M76XX-TSNCJOLYM-534040056
Am i going to get in to trouble if i upload this rom anyway?
Thanks in advance
1. try updating with flash tool: http://forum.xda-developers.com/showthread.php?t=986692 or http://forum.xda-developers.com/showthread.php?t=826455
a good guide for flashtool: http://forum.xda-developers.com/showthread.php?t=928343
2. alternately download pc companion: http://www.sonyericsson.com/cws/sup...ject/pccompanion/xperiax10minipro?cc=ph&lc=en
and update you phone software.
3. use seus but i cant find the link to download.
because if you dont it wont work and as they always say "I wont be held responsible if you brick you phone"
You have to use the correct firmware and baseband. Otherwise will have problems.
I flash a few roms with the wrong baseband and had a lots of problems of stability.
Now I have MiniCM7-2.1.9, with nAa-11 kernel and works perfect.
Ok thanks. I'll try to find that firmware version and flash it before i continue with kernel and rom. Do you have any link to where i could find these firmware versions?
magnumko said:
Ok thanks. I'll try to find that firmware version and flash it before i continue with kernel and rom. Do you have any link to where i could find these firmware versions?
Click to expand...
Click to collapse
Try this one //db.tt/ukt80PBn (I can't post links yet)
Or search in the "XPERIA X10 Mini Pro Android Development " area.
(Sorry for the double post, I don't think where I posted previously was correct and I think it got zero reads!)
So, I was given this AT&T branded X10a to use to help out a family member, I am not sure how long it has been out of service (maybe a year or so)
So far what I have done:
Used PC companion to return to stock
Obtained SIM unlock from AT&T (used defunct Verizon SIM to get prompt and entered code, appears to have worked)
Installed Flashtool and can recognize phone
Installed S1 Tool and verified connectivity
Currently s1tool returns
8/16/2012 16:51:14 RUNNING S1_EROM VER "R8A013"
8/16/2012 16:51:14 SOFTWARE AID: 0001
8/16/2012 16:51:14 LOADER AID: 0001
8/16/2012 16:51:17 FLASH ID: "002C/00B3"
8/16/2012 16:51:17 LOADER VERSION: "R4A024"
8/16/2012 16:51:17
8/16/2012 16:51:17 MODEL (from GDFS): X10a
8/16/2012 16:51:17 SOFTWARE VERSION: 1238-0269_2.1.A.0.492
8/16/2012 16:51:17 CUSTOM VERSION: 1237-3761_R31B
8/16/2012 16:51:17 FILESYSTEM VERSION: ATT-1-2-5-6_2.1.A.0.492
8/16/2012 16:51:17 SERIAL NO: xxxxxx
8/16/2012 16:51:17
8/16/2012 16:51:17 SEMC SIMLOCK CERTIFICATE
8/16/2012 16:51:17 Elapsed:18 secs.
Click to expand...
Click to collapse
Firmware : 2.1-update1
Baseband : 2.1.65
Kernel : [email protected]#1
So, my questions are more on what should I attack first! Not sure if I should:
Root -> BL Unlock -> Debrand to some generic from Flashtool
Debrand -> Root -> BL Unlock
Root -> BL Unlock -> Custom ROM
I am just a little confused on what direction I should head first with the rest of this. I was looking at the FeraLab New Gen ROM and it said that you needed Baseband of 2.1.71 as a requirement.
Seems like there are a couple of choices for root (flashtool and superoneclick) and a couple for recovery (Xrecovery and the two in flashtool). Just trying to decide what is best. As above I don't know if I should Root now before updating or update to one of the generic 2.3 roms then root... decisions decisions.
Thanks for any and all help.. I have been doing some searching just think I am overwhelmed with information starting on this phone. (my EVO and EVO Shifts were pretty straightforward I thought, this phone just seems to have a different way of doing things)
tschwenke said:
(Sorry for the double post, I don't think where I posted previously was correct and I think it got zero reads!)
So, I was given this AT&T branded X10a to use to help out a family member, I am not sure how long it has been out of service (maybe a year or so)
So far what I have done:
Used PC companion to return to stock
Obtained SIM unlock from AT&T (used defunct Verizon SIM to get prompt and entered code, appears to have worked)
Installed Flashtool and can recognize phone
Installed S1 Tool and verified connectivity
Currently s1tool returns
Firmware : 2.1-update1
Baseband : 2.1.65
Kernel : [email protected]#1
So, my questions are more on what should I attack first! Not sure if I should:
Root -> BL Unlock -> Debrand to some generic from Flashtool
Debrand -> Root -> BL Unlock
Root -> BL Unlock -> Custom ROM
I am just a little confused on what direction I should head first with the rest of this. I was looking at the FeraLab New Gen ROM and it said that you needed Baseband of 2.1.71 as a requirement.
Seems like there are a couple of choices for root (flashtool and superoneclick) and a couple for recovery (Xrecovery and the two in flashtool). Just trying to decide what is best. As above I don't know if I should Root now before updating or update to one of the generic 2.3 roms then root... decisions decisions.
Thanks for any and all help.. I have been doing some searching just think I am overwhelmed with information starting on this phone. (my EVO and EVO Shifts were pretty straightforward I thought, this phone just seems to have a different way of doing things)
Click to expand...
Click to collapse
1) upgrading to 2.3.3. upgrading will upgrade your baseband to .71 so you can install custom roms easily: many ways to do it.
[a] officially using pc companion or SEUS. you can download them using google. pretty straightforward to use.
using flashtool. Download 2.3.3 firmware from this thread: http://forum.xda-developers.com/showthread.php?t=1749426
unzip the file to get an ftf file and flash through flashtool.Use this guide on how to flash via flashtool:http://forum.xda-developers.com/showthread.php?p=19685019
2) You should root your phone(flashtool will be easier as you have already installed it) and follow this guide to unlock your bootloader : http://forum.xda-developers.com/showthread.php?p=19685019#post19685019
3) after you unlock you need to flash the kernel via flashtool.
two types of kernels
[a] stock based kernel for stock based roms: doomkernel v6,th kernel etc (its your choice).
doomkernel comes with both xrecovery and cwm preinstalled.
xrecovery- install stock based roms
cwm-install cm based roms
but you should check what recovery to use in rom thread
cm based kernels- for cyanogen(cm) roms. eg fxp kernel, kCernel etc.
check the rom thread what kernel to use.
choose your rom, and install recommended kernel via flashtool and install rom through recommended revovery
EDIT: next time ask questions in Q & A section
Thanks exactly what I needed, especially being so far behind in what has happened over time, starting late on phones is always fun! Yeah, the title and rules for other thread it seemed right, but obviously wasn't, then I went general and now moved to Q&A. So I guess I got two lessons out of this!
Again, thanks (meter updated!)
tschwenke said:
Thanks exactly what I needed, especially being so far behind in what has happened over time, starting late on phones is always fun! Yeah, the title and rules for other thread it seemed right, but obviously wasn't, then I went general and now moved to Q&A. So I guess I got two lessons out of this!
Again, thanks (meter updated!)
Click to expand...
Click to collapse
no problem.
heere to help you
post here if you have any other doubts
Pls help me to relock my bootloader on my x10, ive tried to unlock in some thread but I did a mistake, my signal bar is missing that openline for sim lost, technician repaired my phone to go back in open line sim, and flash it to stock 2.1-update1 x10a, build nr 2.1.1.A.0.6, baseband v 2.1.55, and kernel version 2.6.29 [email protected] #1 and now i cant flash to other firmware and it is to badly for not costumizable and rooting
my previous firmware is 2.3.9 feralab final..
i am newbie for an android phone and lack of knowledge..
im sorry for my english
FredCord said:
Pls help me to relock my bootloader on my x10, ive tried to unlock in some thread but I did a mistake, my signal bar is missing that openline for sim lost, technician repaired my phone to go back in open line sim, and flash it to stock 2.1-update1 x10a, build nr 2.1.1.A.0.6, baseband v 2.1.55, and kernel version 2.6.29 [email protected] #1 and now i cant flash to other firmware and it is to badly for not costumizable and rooting
my previous firmware is 2.3.9 feralab final..
i am newbie for an android phone and lack of knowledge..
im sorry for my english
Click to expand...
Click to collapse
This did not happen using my tutorial did it? anyway you could go and root and install custom roms when your done:
http://forum.xda-developers.com/showthread.php?t=1821750
i also encoutered that... before you proceed on any process make sure you disable your AV because some av detected the extracted file of flashtool as a virus and deleted some part of it and after flashing you will xperience some bug
bk1on1 said:
i also encoutered that... before you proceed on any process make sure you disable your AV because some av detected the extracted file of flashtool as a virus and deleted some part of it and after flashing you will xperience some bug
Click to expand...
Click to collapse
Mam/sir thank you for your help! Ive got a clue for me for your response I'd tried to install drivers in my flash tool 0.6.7.0 and i got it! now, can I have to make my phon into ICS? I am not sure if I got unlocked my bootloader sucsecful after my phone got a soft brick before
Hello I am trying to downgrade an Xperia X10i to Android 2.2 or 2.1 to use some cellphone network unlocking software. I am having a problem flashing a rom but I think it's because I need to flash a compatible baseband. I've searched XDA and there are a list of files but none of the links are working unfortunately - would anyone be able to link to baseband: 2.1.55 or 2.1.54 please for the X10i? I also need the 2.6.29 kernal then hopefully I'll be able to flash a 2.1/2/2 rom successfully.
Cheers.