I'm getting annoyed enough that I'm trying to do this myself, but need some help. Trying to follow instructions found here, I've so far gotten the headset button back to performing MEDIA_PLAY_PAUSE (super happy about that).
I don't know how to do a double press or also make it answer a call. Am I at the end of what can be done through this kind of modification?
Related
Hi,
I am new to this site...
I have a Cingular 8525 which is a recent upgrade from a Cingular 8125. I installed MSVC 1.5 on my phone and then installed the upgrade to MSVC 1.6.
I just purchased a Jawbone BT headset, and basic linking/use is fine.
However, I was under the impression that I would be able to use voice to dial through the headset. This doesn't seem to be the case.
After doing some searching here I have come across a reference to a '09f fix' or '09f tweak' several times, but I can't seem to find any more information about this.
Can someone point me to more information / access to this '09f' fix or tweak?
Thanks,
Rob
rob_milton said:
Hi,
I am new to this site...
I have a Cingular 8525 which is a recent upgrade from a Cingular 8125. I installed MSVC 1.5 on my phone and then installed the upgrade to MSVC 1.6.
I just purchased a Jawbone BT headset, and basic linking/use is fine.
However, I was under the impression that I would be able to use voice to dial through the headset. This doesn't seem to be the case.
After doing some searching here I have come across a reference to a '09f fix' or '09f tweak' several times, but I can't seem to find any more information about this.
Can someone point me to more information / access to this '09f' fix or tweak?
Thanks,
Rob
Click to expand...
Click to collapse
Hey Since you're new I'll provide a link. It should be located somwhere on this page in this thread. BT Voice Command something or other
http://forum.xda-developers.com/showthread.php?t=283412&page=32
Give a man a fish and he eats for a day. BUT!!! Give a man a fishing pole and he eats for the rest of his life.
Check out this wiki. You can find just about everything you are looking for here.
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
When you get everything all hooked up join us in the Jawbone thread. I'd like to hear your experience with it. I'm gonna test mine today with the sunroof back and drivers window down doin 80+...see if they can hear me now!
X
p.s. IF you have issues getting it to work there are some great tips in that entire thread. It's great reading...especially when you get it to work in the end. BOO YA!
Xultar,
Thank you for the response...
I am finding it interesting to read through all the information on this site. I had already spent a lot of time in the WIKI that you referenced.
I guess I'm just dense, but I still can't find the file 0.9f (.cab ?). The thread you referenced says download it. But it doesn't say where? I can't seem to find it anywhere on this site or by Googling...
Can you point me in the right direction?
Thanks,
Rob
Ok... I finally found the 0.9f cab...
The instructions say to 'run' it. I don't know how to 'run' the cab file?? I unzipped the zip file I downloaded. What do I do with the cab file?
Thanks,
Rob
Hmmmm....
Ok.. found you can just copy cab file to phone and double click...
I've gone through the steps detailed in the thread you referenced, but no luck...
When I push the button on the headset a dialog pops up on the phone asking if I want to run BTVoiceCommand. The phone locks up at this point...
Any thoughts?
rob_milton said:
Hmmmm....
Ok.. found you can just copy cab file to phone and double click...
I've gone through the steps detailed in the thread you referenced, but no luck...
When I push the button on the headset a dialog pops up on the phone asking if I want to run BTVoiceCommand. The phone locks up at this point...
Any thoughts?
Click to expand...
Click to collapse
There should be an icon in your program menu for BT Voice command config
enable it I sent my VC duration to 20. In the bottom left corner it should say version 0.0f
Thanks for the time and assistance...
I did have the program enabled, and the version said 0.9f. However, when I would push the button on the headset to activate VC the following happened: VC would activate (I'd see the icon and hear a tone in the headset). But then a warning dialog would appear that asked if I wanted to run BTVoiceCommand.exe. At this point the phone would lock up. The dialog offered 'Yes' and 'No' buttons, but I couldn't click either. No function on the phone would work at this point.
I'm sure I'll come back to this in the future. But I tested the Jawbone, and I've decided to take it back. It is fantastic at general noise reduction. But it is TERRIBLE at handling wind noise. I drive a Jeep with the top down. I need to find a device that specializes in handling wind noise.
Thanks again for you help...
rob_milton said:
Thanks for the time and assistance...
I did have the program enabled, and the version said 0.9f. However, when I would push the button on the headset to activate VC the following happened: VC would activate (I'd see the icon and hear a tone in the headset). But then a warning dialog would appear that asked if I wanted to run BTVoiceCommand.exe. At this point the phone would lock up. The dialog offered 'Yes' and 'No' buttons, but I couldn't click either. No function on the phone would work at this point.
I'm sure I'll come back to this in the future. But I tested the Jawbone, and I've decided to take it back. It is fantastic at general noise reduction. But it is TERRIBLE at handling wind noise. I drive a Jeep with the top down. I need to find a device that specializes in handling wind noise.
Thanks again for you help...
Click to expand...
Click to collapse
Actually no headset can handle wind noise very well.
About MS VC 16 and 0.9f...A hard reset may be necessary but if you want it to work...and it does a hard reset is worth it. For what it is worth 0.9f works in general with all BT headsets.
Good luck
X
I can say that it works great with the SE DS970
Well, today my girlfriend found out that she can play Words with Friends on her Samsung Fascinate. Only, she had AdFree for Android installed, and it was causing numerous errors. So she did what any person of average intelligence would do: She googled an answer.
http://neallambert.com/?p=5
The gist of the issue is, when instructed to make sure her screen matched the screenshot exactly, of course she didn't. She dd'd two extra lines. Since then, she's not been able to search or go home.
When pressing the Search or the Home Softkey, it provides the haptic feedback and blinks the light, but nothing happens.
Also, I installed Galaxy Tuner as a workaround until I discovered a way to fix it (or enlisted the help of those of you here that are far more savvy than myself), and mapping the touch gestures to home and search, the same thing happens. Meaning, when the specified gesture for home is executed, it will provide the haptic feedback, but nothing else happens. So it registers the command, but it is not completed.
If you have any ideas how to fix this, or can just point me in the right direction, it would be greatly appreciated. Thanks in advance for your help!
Flash THIS FILE via CWM and it should reset melfastouchkey settings.
good day.
Hey Chopper, Thanks for the response. I did flash the download, but it was still exhibiting the same symptoms. In the end, I just did a wipe/reinstall.
Searched the forum but have had no luck finding this issue, but of course on searching using the touchpad so its not as easy as on a pc, so I nigh have just ran out of patients.
Anyways, is anyone's Touchpad constantly locking down while it sits idle? Basically the screen would be off but when I get back to it it doesn't respond to any of the buttons, only way to get it going is through the hard reset (top and home button). Am I missing some directions? Is there a special combination needed to activate the button control or is it really locking up?
Just to clarify, the touchpad could be sitting completely stationary and idle, and it still won't respond if I try to get it going. Also it seems to be at random, doesn't depend on a certain amount of time.
thanks for any input or link to another thread, I really want to give the touchpad a chance.
This is not typical behavior. I think I remember reading that this happening to someone else. I believe the suggestion was to use home button + volume up to wake it up. Or maybe it was power button + volume up? Sorry, I don't remember the exact combo, give'em both a try and see what you.
Thank you for the advice, however it was to no vial. No combination except for the hard reset returned a result.
Does anyone else have any suggestions?
have you reimaged through? I'd give that a go since you seem to be having so many issues.
Re-imaging using built in "reset" or a third party software? and if some other software what would be recommended?
I had this, it was the overclocking...usually happened when I had my email open.
I originally had f15c, switched to warthog and all was good.
cccpms6 said:
Re-imaging using built in "reset" or a third party software? and if some other software what would be recommended?
Click to expand...
Click to collapse
WebOSDoctor.
Hey guys, I'm having this issue with my stock Razr Maxx, where the ringtone volume turns down (close to silent) and I don't even know it unless I receive a call and there isn't any noise around (or else I totally miss the call).
I understand this is probably a well known bug, but I would just like to know if there's anything triggering it, so I know how to avoid this. I'm using a bluetooth headset every day, at work, but I haven't figured out a pattern yet, or even if the bluetooth headset is causing this.
Help? Please?
teomor said:
Hey guys, I'm having this issue with my stock Razr Maxx, where the ringtone volume turns down (close to silent) and I don't even know it unless I receive a call and there isn't any noise around (or else I totally miss the call).
I understand this is probably a well known bug, but I would just like to know if there's anything triggering it, so I know how to avoid this. I'm using a bluetooth headset every day, at work, but I haven't figured out a pattern yet, or even if the bluetooth headset is causing this.
Help? Please?
Click to expand...
Click to collapse
Looks like your bluetooth headset may be changing the volume without your consent.
Try to plug it off at least for a day and see if the problem happens
It looks like it wasn't the bluetooth headset.
During the weekend I haven't used it and this morning the volume was all the way down...
I have disabled the 'increasing volume' setting from my alarm and see if that helps, as I realized I always snooze or stop the alarm while it's still barely audible.
=P
I'm used to have three different alarms. I don't like snooze...i prefer to sleep more ten minutes and have a different alarm. Since i'm sleepy when i look the alarm i tend to cancel it instead of snooze also
Some time ago i had a similar problem with my XT910. After taking it to a authorized local service my volume up key wasn't working anymore ; they fixed it somehow.
Why don't you try to install an custom rom or reflash your actual rom ? It would tell us if your problem is hardware or software (if the problem persists with another rom surely its a hardware thing - i don't think kernel is related to this).
I will be flashing the official JB when it comes out, hopefully soon. I've got the "MERetail.en.06" software version now and I understand this is the Middle East version, which will not get the JB OTA update, so I will have to flash another ROM anyway. I'm willing to wait for it to come out first.
I'm new to this forum. Please let me know if I am doing something wrong. On my Ulefone power armor 13 phone, the volume from the handset was very low. I opened engineer mode by dialing *#*#3646633#*#*. I changed the sound levels. But I didn't know exactly which setting I changed. That's why I need default settings right now. I can't reset my phone because it has too much data and I'm not in a position to back it up yet. I need someone using this phone to share all sound levels as screenshots or text. Thank you in advance.
Hey, I have the same issue of quiet headset. I have to keep saying "WHAT? Can you please repeat" Loool it's not that often, but happens sometimes. I had it with my Doogee S90 too. But I don't remember how I fixed it lol.
What screen you wanna see I will be happy to share.
Btw, I think the right thing would be using Viper Magisk module. But, I haven't tried it myself.
This is the Audio and voice settings.
Yes, that's what I'm talking about. But I need all the settings. For example, if we take the first picture you took, I need all the settings after clicking the "system" tab. And the same things need to be done for the other tab "bt a2dp". I want something very challenging but I really need it. Because my headset was too low. I increased all the levels as I don't know which setting fixed it. Now headset is fine. But this time other audio-requiring things like audio recording and video recording got worse. I am on a business trip. That's why I haven't taken the phone with me right now. If I solve this problem, I will start using it again. It has incredible battery performance and that's what I really need. Thanks again for your help.