Hello;
Sorry for my english is too poor.
I rebooted the phone and held the "Back" key to go into recovery mode again. But it did not go into recovery. Now i see only "Sony Ericsson" and it nothing else. In my x10 usb port doesn't work too, what should i do? Please help...
Remove batery for a few. Minutes then try again,
Sent from my X10 using XDA App
not work it
keep tapping the back button instead of just holding it down
thanks, but it still not work :/
Do you have xrecovery instaled on your device?
If you have try to push the down volume button wenn the device startet,
Sent from my X10 using XDA App
What do you mean? Recovery Mode xrecovery or Flash Mode. What are you planning? If nothing helps then you'll have to reflash your phone.
Sent from my X10 using XDA Premium App
USB port in x10i doesn't work, i have installed xrecovery, but x10i show only "sony ericsson" and nothing else...
Try to enter on xrecovery ,you must your device to turn on,and when sony ericsson appears just tap volume down button until you came in xrecovery,
Sent from my X10 using XDA App
Why volume down button?
Doesn't work :/
It's not important which key you press. Except the "middle" key. If you even can't enter the xrecovery menu then you probably have to reflash your phone.
Sent from my X10 using XDA Premium App
since when does your usb port not work, before or after this issue?
read this!
http://forum.xda-developers.com/showthread.php?t=859571,
before this
ovidius81 said:
read this!
http://forum.xda-developers.com/showthread.php?t=859571,
Click to expand...
Click to collapse
why?
my x10i is rooted, and have busybox..
do you have a custom rom or your original firmware from your provider?
original 2.1
du you have any warranty ?
i had the same issue with the usb port,an i bekome a neu device from my provider,if you can try another usb cable!or clean your port gently
i don't have warranty, i will pay for repair this :/
try to find a servicecenter that can replace the usb port,this is a known issue for device
Related
hello everyone
i srsly need help right now
i was using stock rooted rom 2.3 and i downloaded tripnmiui 2.2 latest version and i flashed it.. .. bt later i realized tht i shldnt hav flashed it through recovery and all..
and then after flashing it i rebooted my phone, after the SE logo it reboots again and again. thn i tried to RESTORE frm recovery bt i dnt knw wht happened that im unable to mount the sd card or even restore from it. i cnt even flash back to stock 2.3 via flashtool.
i dnt knw wt to do. please help ppl.
P.S im a noob
You were trying to use the 2.3 baseband on a non-2.3 rom. That's why it kept rebooting.
To fix it, just keep trying flashtool, PC Companion, or SEUS.
Sent from my X10i using XDA Premium App
Frosty666 said:
You were trying to use the 2.3 baseband on a non-2.3 rom. That's why it kept rebooting.
To fix it, just keep trying flashtool, PC Companion, or SEUS.
Sent from my X10i using XDA Premium App
Click to expand...
Click to collapse
im unable to Mount the SD card confused:
when i mount from recovery it says :
E: Can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0)
(device or resource busy)
Error mounting SDCARD: !
and yes its not even connecting to flash tool.
momerbk said:
and yes its not even connecting to flash tool.
Click to expand...
Click to collapse
Not even in flash mode? (Hold down back button when plugging in the usb)
Sent from my X10i using XDA Premium App
Frosty666 said:
Not even in flash mode? (Hold down back button when plugging in the usb)
Sent from my X10i using XDA Premium App
Click to expand...
Click to collapse
i know how to connect it my friend. whn i insert usb cable in the phone EVEN if im not holding the back button the led turns green.
other than that, when i connect in flash mode the flash tool doesn't detects the phone though the phone led is green
momerbk said:
i know how to connect it my friend. whn i insert usb cable in the phone EVEN if im not holding the back button the led turns green.
other than that, when i connect in flash mode the flash tool doesn't detects the phone though the phone led is green
Click to expand...
Click to collapse
Install the x10 adb drivers and use flashtool should be good to go
Sent from my X10 using XDA Premium App
Sorry if I sound patronizing or rude or anything, but have you used flashtool before? You open it up, hit flash, choose your firmware, hit ok, when a box comes up about connecting in flash mode, you plug the phone whilst holding the back button. It should start flashing automatically.
With regards to the phone going into flash mode (green led) whenever you plug it in, mine used to do that until I flashed gingerbread on it. Its normal I think, but you should still hit back if you want to get into flash mode.
Sent from my X10i using XDA Premium App
shahkam said:
Install the x10 adb drivers and use flashtool should be good to go
Sent from my X10 using XDA Premium App
Click to expand...
Click to collapse
il try that now and let u know
thanks
Frosty666 said:
Sorry if I sound patronizing or rude or anything, but have you used flashtool before? You open it up, hit flash, choose your firmware, hit ok, when a box comes up about connecting in flash mode, you plug the phone whilst holding the back button. It should start flashing automatically.
With regards to the phone going into flash mode (green led) whenever you plug it in, mine used to do that until I flashed gingerbread on it. Its normal I think, but you should still hit back if you want to get into flash mode.
Sent from my X10i using XDA Premium App
Click to expand...
Click to collapse
no no not at all my friend. and i did still press the *back* button.
Frosty666 said:
Sorry if I sound patronizing or rude or anything, but have you used flashtool before? You open it up, hit flash, choose your firmware, hit ok, when a box comes up about connecting in flash mode, you plug the phone whilst holding the back button. It should start flashing automatically.
With regards to the phone going into flash mode (green led) whenever you plug it in, mine used to do that until I flashed gingerbread on it. Its normal I think, but you should still hit back if you want to get into flash mode.
Sent from my X10i using XDA Premium App
Click to expand...
Click to collapse
shahkam said:
Install the x10 adb drivers and use flashtool should be good to go
Sent from my X10 using XDA Premium App
Click to expand...
Click to collapse
okay now i am able to connect in flash mode and its getting detected, i reinstalled the drivers.
not the prob is when i try to flash it with the stock 2.3 rom OR even with baseband .52 i get this :
21/012/2011 06:12:29 - INFO - Preparing files for flashing
21/012/2011 06:12:33 - INFO - Searching Xperia....
21/012/2011 06:12:33 - INFO - Found at USB\VID_0FCE&PID_ADDE\5&1F2FC82A&0&1
21/012/2011 06:12:33 - INFO - Start Flashing
21/012/2011 06:12:46 - INFO -
21/012/2011 06:12:46 - ERROR - Error flashing. Aborted
21/012/2011 06:12:46 - INFO - Now unplug the device and power it on
21/012/2011 06:12:46 - INFO - Then go to application settings
21/012/2011 06:12:46 - INFO - turn on Unknown Sources and Debugging
EDIT
Okay so guys, i finally managed to flash the bb .52 THANKS A LOT love xda and its members *no homo*
Hi mates
My X10 hang on Sony Ericsson logo and not boot into system.
Now i want to flash a kernel or fw with FlashTool but it say turn on debugging mode, but i cant boot into system and turn it on!!!
help me PLEAAAAAAAASE
I'm a noob and this happened to me also,maybe someone is more advanced on this will chime in
..what I did was, bought a service from fast GSM.
Sent from my X10i using xda premium
arash64a said:
Hi mates
My X10 hang on Sony Ericsson logo and not boot into system.
Now i want to flash a kernel or fw with FlashTool but it say turn on debugging mode, but i cant boot into system and turn it on!!!
help me PLEAAAAAAAASE
Click to expand...
Click to collapse
have you xrecovery 0.3? the new one, maybe do a factory reset and wipe all the things and try it again. if that even not work try wipe dalvik cach and fix permissions
my phone dont enter the XRecovery !!!
what can i do ?
no any other way to install new kernel for add Xrecovery with FlashTool ?
My Status:
1.My phone hang on Sony Ericsson logo
2.My phone cant enter in Xrecovery mode.
3.I cant install new kernel with Flashtool bcoz debugging mode is off.
I had the same problem. I made a thread about it and the solution is on the second page. http://forum.xda-developers.com/showthread.php?t=1340161
Basically you got a boot loop and will need to flash a new stock rom and root it again and then put your custom roms if you want.
The solution goes until unlocking a bootloader. If you don't need this, don't do it.
- Captain Scrat
put into flash mode and flash rom with flashtool?
Sent from my SO-01C using xda premium
arash64a said:
my phone dont enter the XRecovery !!!
what can i do ?
no any other way to install new kernel for add Xrecovery with FlashTool ?
My Status:
1.My phone hang on Sony Ericsson logo
2.My phone cant enter in Xrecovery mode.
3.I cant install new kernel with Flashtool bcoz debugging mode is off.
Click to expand...
Click to collapse
Alright, one thing is what you can do is.
use pc companion and going back to the original Android 2.3
and start all over again.
PC companion asks you to drag down USB,how do you do that,if you are stuck in the start up screen?
Sent from my X10i using xda premium
pheel said:
put into flash mode and flash rom with flashtool?
Sent from my SO-01C using xda premium
Click to expand...
Click to collapse
But to flash new rom you have drag down USB,right?
Sent from my X10i using xda premium
z28tovette said:
But to flash new rom you have drag down USB,right?
Sent from my X10i using xda premium
Click to expand...
Click to collapse
No... Just turn off your phone and take out the battery and unplug the USB.
Now hold the back button and put the battery in, it will boot in recovery mode, the green led on the top will light up.
Here you need to plug in the USB quick and flash the stock rom with the flashtool (I suggest having it already selected and the mouse on the button FLASH for quicker use, because the phone does not stay in recovery mode for long, at least mine didnt,)
scrat55 said:
No... Just turn off your phone and take out the battery and unplug the USB.
Now hold the back button and put the battery in, it will boot in recovery mode, the green led on the top will light up.
Here you need to plug in the USB quick and flash the stock rom with the flashtool (I suggest having it already selected and the mouse on the button FLASH for quicker use, because the phone does not stay in recovery mode for long, at least mine didnt,)
Click to expand...
Click to collapse
yes indeed if that dont work try se pc suite.
scrat55 said:
No... Just turn off your phone and take out the battery and unplug the USB.
Now hold the back button and put the battery in, it will boot in recovery mode, the green led on the top will light up.
Here you need to plug in the USB quick and flash the stock rom with the flashtool (I suggest having it already selected and the mouse on the button FLASH for quicker use, because the phone does not stay in recovery mode for long, at least mine didnt,)
Click to expand...
Click to collapse
You are awesome,where were you when this happened to me lol.
Sent from my X10i using xda premium
z28tovette said:
You are awesome,where were you when this happened to me lol.
Sent from my X10i using xda premium
Click to expand...
Click to collapse
Hehe glad to help. I was freaking out when it did happen to me and spent like 1hour doing searches to find how to unloop it. lol
- Captain Scrat
Hi, can anyone tell me which rom is compatible with both stock and nAa kernel? I wanted to revert back to android 2.1
Sent from my E10i using XDA
revert back to stock 2.1? try use SEUS, it will detect you'll have updated software and you choose install.
There's only an exit button on seus
Sent from my E10i using XDA
lthy31 said:
There's only an exit button on seus
Sent from my E10i using XDA
Click to expand...
Click to collapse
last day i use SEUS to revert my x10mp,there's exit and install button. but somewhere in xda they say there's also repair button. did you enter the flash mode correctly?
If you put your phone in flashmode then SEUS will let you do a "repair". To do that, turn off the phone, hold the back key then without releasing connect the USB, keep holding the back key. SEUS will notice the phone and ask if you want to repair it.
lthy31 said:
There's only an exit button on seus
Sent from my E10i using XDA
Click to expand...
Click to collapse
he say repair button, but i found install button.
lisiano256 said:
If you put your phone in flashmode then SEUS will let you do a "repair". To do that, turn off the phone, hold the back key then without releasing connect the USB, keep holding the back key. SEUS will notice the phone and ask if you want to repair it.
Click to expand...
Click to collapse
Can't there is just an exit button, is it because of face problem?
Sent from my E10i using XDA
I don't think it exists a stock rom that could run with Nan kernel. You have to use SEUS as written previously. Pay attention to the led light it should be steady green when you start in flash mode (back button pressed insert the USB cable) it should recognize your device as E10i than choose repair.
Sent from my DESIRE HD using XDA
Already said that seus just have an exit button
Sent from my E10i using XDA
i recently flash the ginger dx rom, but when i hit the reboot option on the recovery after flashing it, the phone won't start :S it keeps showing me an screen after the letter "sony ericsson" where only shows four distortioned orange androids, and after that the phone reboot itself and never start, is it brick or what? what can i do?? please help me! i don't have the bootloader unlock, and that rom says it work with the stock kernel, so i don't know whats going on
sorry, the problem was that i flash an x8 rom on my x10 mini pro :S i didn't see that when i was doing that :O..is the phone bricked? what can i do then?
try going to flash mode. mount your sd card copy the right rom and flash the right one.
demoniacs said:
try going to flash mode. mount your sd card copy the right rom and flash the right one.
Click to expand...
Click to collapse
but the problem is that i can't can enter recovery, or flash mode is other way? how can i enter flash mode?..because went i turn on the phone, and the letter sony ericsson appears, you suppose to hit the back key repeaditly, but nothing happens when i do that, it just appears the orange android i mentioned before
oh and sorry for the english XD
When you turn on the phone hold the back button
Sent from my U20i using XDA
Connect the phone on the PC when. You connect it press the power the home and the back buttons the same time when the phone is rebooting release the power and the home buttons but still pressing the back button and you can enter in the flash mode and use the flash tool to get your phone normally
Sent from my E10i using xda premium
I know, I know that this question has been always on the forums but mine is different. It really won't open!
Tried the hard reset thing, nope it doesn't work at any combo.
Flashtool? Nope it won't work. PC never detected it. Pressing the volume up / down button won't work so is the camera and the power before plugging, during, and after the USB.
I don't know what else to do!! :
I need your help experts And no, I don't want to send it to repair centers
zx12cv34 said:
I know, I know that this question has been always on the forums but mine is different. It really won't open!
Tried the hard reset thing, nope it doesn't work at any combo.
Flashtool? Nope it won't work. PC never detected it. Pressing the volume up / down button won't work so is the camera and the power before plugging, during, and after the USB.
I don't know what else to do!! :
I need your help experts And no, I don't want to send it to repair centers
Click to expand...
Click to collapse
Hard power off works??
Sent from my Galaxy Nexus using xda app-developers app
Sherwinnn said:
Hard power off works??
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
hard power off not working as well as PC Companion / SUS / flashtool unable to detect it.
when you try to plug it in the red LED works
EDIT: while plugging it in, the red LED disappears instead of turning into color green (fully charged)
Try to leave it on and connected with flashtool and watch the flashtool window. It helped me once when I messed flashing. Flashtool it detectrd after one or two minutes and I flashed stock tft.
Sent from my MT27i using xda app-developers app
matood said:
Try to leave it on and connected with flashtool and watch the flashtool window. It helped me once when I messed flashing. Flashtool it detectrd after one or two minutes and I flashed stock tft.
Sent from my MT27i using xda app-developers app
Click to expand...
Click to collapse
but it's working great before it. it just turned out to be like that when I was changing the sim card.
tried flashtool but i can't connect the phone. i'm in the part where you have to press the back button (volume - or +) when connecting it.
Dont try flash, just turn on, eg hatd reset (volume up+power on/off button) and let it connected, dont try go to cwm. Just let it lets say boot, I know, screem is dark but after while youll see in flashtool main window that phone is detected, it took me one or two mins to get it. Then you can try fastboot and flash correct kernel. And try to remove the SIM card or insert the old one.
Sent from my MT27i using xda app-developers app
matood said:
Dont try flash, just turn on, eg hatd reset (volume up+power on/off button) and let it connected, dont try go to cwm. Just let it lets say boot, I know, screem is dark but after while youll see in flashtool main window that phone is detected, it took me one or two mins to get it. Then you can try fastboot and flash correct kernel. And try to remove the SIM card or insert the old one.
Sent from my MT27i using xda app-developers app
Click to expand...
Click to collapse
it really won't turn on no matter what I try and no, the screen isn't the problem. there's not even a backlight
Give proper details!!!
Rom,
kernel,
where able to connect to PC suite before this problem ,
How did it happen?
And what is happening like boot lap or stuck on boot screen , not turning on???
What exactly is the problem ???
Let me tell u one thing about what you said in ur post about hard reset any combination of keys didn't work... you know y didn't they?? Cause their ain't none ... No combination keys are available for hard reset cause it ain't symbian Nokia
Sent from my Xperia Sola using xda premium
seems a hardware problem then ...
When you reset, power on/off button+volume up, does it vibrates I think 3 times?
Sent from my MT27i using xda app-developers app
soulhackereborn said:
Give proper details!!!
Rom,
kernel,
where able to connect to PC suite before this problem ,
How did it happen?
And what is happening like boot lap or stuck on boot screen , not turning on???
What exactly is the problem ???
Let me tell u one thing about what you said in ur post about hard reset any combination of keys didn't work... you know y didn't they?? Cause their ain't none ... No combination keys are available for hard reset cause it ain't symbian Nokia
Sent from my Xperia Sola using xda premium
Click to expand...
Click to collapse
hard reset combos: power + vol up / power + vol down / vol up + vol down / power + vol up + vol down. I've tried them all. not a newbie here so don't treat me like one please
rom + kernel = pure blood sola v2. i don't think it's the rom's fault tho since my sister has the same rom and her's works like a charm. the rom has been in the phone for more than 2 months without any problems (my phone's). files are accessible and photos are transferable.
How did the problem arise? everything was working great till i changed the sim card. then poof! it won't work anymore. to be honest it wasn't my phone. i'm just trying to fix it
not turning on. no power. no backlights meaning its not the display problem. when you plug it in via usb / wall charger there's a red LED but after an hour it disappears.
really need your help guys
could work
I have a Xperia U and triying to port JB to it I briked two or three times.
I hold power botom and it vibrate and doesnt happen anything ok.?¿
The possible solution could be this(for my works)
Charge the phone like 1 hour for my doesnt charge with the animation but its for security.
With the nest steps you are going to lose all CWM and tweaks and apks but personal data still there.
You have two options:
Flash a new rom with flashtool, but when you pluged with volum - you hold it for allmost all process becose for my i conect to PC and its goes quikly so i cant do annything.
If the phone is not recognised by Flashtool:
You have to repair it with PC Companion or Bridge for Mac, and also the same hold volum - almost all process.
For my it works, tell my if for you works:cyclops::cyclops::cyclops:
matood said:
When you reset, power on/off button+volume up, does it vibrates I think 3 times?
Sent from my MT27i using xda app-developers app
Click to expand...
Click to collapse
hay i have the same problem and yes it dose so what to do ???
Same problem here..
Anyone?
--EDIT
Problem solved
i have encounter the same problem but i after i read this post, i revive again my phone, by just flashing the original kernel using flashtool and hold the fastboot key or the volume up key until the flashing was finished,