Been using the clocksync app from market. Using it to auto correct the time drift issue I keep experiencing.
Every time you hit the windows button and open that menu bar, the clock is fine. As soon as you close it your clock stops 'ticking' until the menu is closed usually causing up to 3 seconds of time drift, over the course of a day my time usually half an hour out at least.
Download the app and try opening and closing the menu and test it for yourself
Why does this happen? I'm happy using this app to resync time every few hours if I have to, just reporting this bug like a good tester xD
Edit: I can confirm that most interaction with the ui pauses the clock. For example, closing a menu or sliding down the notification bar.
ryannathans said:
Been using the clocksync app from market. Using it to auto correct the time drift issue I keep experiencing.
Every time you hit the windows button and open that menu bar, the clock is fine. As soon as you close it your clock stops 'ticking' until the menu is closed usually causing up to 3 seconds of time drift, over the course of a day my time usually half an hour out at least.
Download the app and try opening and closing the menu and test it for yourself
Why does this happen? I'm happy using this app to resync time every few hours if I have to, just reporting this bug like a good tester xD
Click to expand...
Click to collapse
this was already known if you read the frx04 thread then you would know that everyone suggests you use clocksync because the clock is still bugged..
shatred said:
this was already known if you read the frx04 thread then you would know that everyone suggests you use clocksync because the clock is still bugged..
Click to expand...
Click to collapse
Actually, this is the first time I've seen someone suggest that they've found a concrete way of reproducing the problem.
However, this is certainly not the only source of clock drift, since I get clock drift when my phone is just sitting there doing nothing. Nonetheless, the fact that it's reproducible will hopefully be helpful to some dev in running down the problem.
the clock is always off, when its sleeping or idle even when you are using it the clock is ALWAYS off a couple ms and those ms increase every second. so bassicly after 15min in life the clock on your phone thinks it have only been 14 mins.
Use clock sync people! its free downloadable from the market and you can set it to auto set time every 30min, 1 hour, 2 hours etc. i prefer every 1 hour as that is very accurate
i did not read it good sorry*
manekineko said:
Actually, this is the first time I've seen someone suggest that they've found a concrete way of reproducing the problem.
However, this is certainly not the only source of clock drift, since I get clock drift when my phone is just sitting there doing nothing. Nonetheless, the fact that it's reproducible will hopefully be helpful to some dev in running down the problem.
Click to expand...
Click to collapse
I can confirm that menu open/close actions do cause clock drift. Not sure why ryannathan's menu takes so long to close. In my case, my menu closes a lot faster and the system clock loses only a few hundredths of a second each time (not a fixed amount, it is variable).
It's especially obvious when you are within ClockSync as the "offset" number increases in magnitude rapidly when you hit the menu button over and over again to repeatedly open/close it.
Edit: Looks like it doesn't help that we don't seem to have access to an RTC. I was curious to see how well the hardware clock was keeping in sync as compared to our system clock, but hwclock can't find an RTC to access.
Is there currently anyone working on this issue?
ryannathans said:
Is there currently anyone working on this issue?
Click to expand...
Click to collapse
i guess not, as most important things are worked on now like battery life, wake up, sleep and a stable running system.
shatred said:
i guess not, as most important things are worked on now like battery life, wake up, sleep and a stable running system.
Click to expand...
Click to collapse
I think it's unreasonable to expect work to "kick off" in less than a day. It is probably bumped up in priority thanks to a reproducible scenario, however, it's a pretty deep-down bug so the people most likely to have the skills to work it are the ones working on power management right now.
(e.g. I have barely any clue where to even start with something like this, so I'll be sticking with my GPS work for now.)
Updated first post to include information about most interections with ui. Check the edit.
Can someone confirm this?
Related
Sometimes you are away from a charger and want to conserve what you have left, or are trying to run a resource heavy app without glitches (satnav) or trying to get a big update/download faster.
I thought we could post tips that either help with speed of the device or with saving battery - particularly if you know of apps or settings that slow the running down or eat battery.
I know these are quite obvious but I'll list some anyway to get us started
Turn these off for extra speed and batt :
Wireless General
GPS (you can leave location by network on for most stuff like weather apps)
Wifi - turning it off while you're out and about saves lots o batt. I also keep network notification off completely unless I'm in a new location looking for a wifi fix.
Bluetooth - set for off and undiscoverable
Mobile network - Set it to 2G for a big boost in battery life (and I've found, if the 3G is rubbish - I know, obvious, but I recently spent 20 mins moaning of no signal at all to send a tx at a gig, then realised I could flick to 2G and was away!!)
Data Sync
Google - You can turn of Auto sync and just sync manually when you choose
Background Data - Turning this off gives a huge battery boost, but gmail won't arrive in real time, so if you're expecting important mail don't turn it off.
On the sync option, if you know contacts and calendar are not changing that often you can uncheck these and sync manually every now and then
Apps that use Data Sync
Weather - check how often the app refreshes and set it to a longer time - some weather apps are by default set to refresh every 30 mins and this might not be needed most of the time.
Twitter and Facebook widgets and apps - again check the refresh periods, also notifications will Use batt more than no notifications.
Same probably applies for Exchange Sync but I don't use it.
Sound/Display - these things will save batt when you need it.
I think having Ring AND vibe will be more batt intensive, so maybe knock off the vibrate when you want to save battery
Keep Brightness low and lower screen timeout.
Turn off Auto rotation and animations and Notification Flash
Turning keypad tones off etc will save a bit too. It all adds up.
Turning Off TouchFLO
When running CoPilot, it helps to turn off wifi and some have reported that if you can toggle the Sense UI to the ordinary Android 3 screen home this helps too (Tho I've personally not had problems) To turn off Sense UI or Touchflo 7Screen home, you need to first go to settings-applications-manage applications and look for TouchFLO then clear defaults. After this, when you go to home, you'll be offered a choice of home or TouchFlo. To toggle back to Touchflo, press the home button again. To return it to default, just check the Use by default for this action, and then make your choice.
Post anything you've found to help or hinder speed, or to drain or boost battery life
Ta Dayzee xx
Is there a widget to switch from 3G to 2G?
no, that is not a setting that can be done on a widget. all the ones that are around and claim to do it just jump you straight into mobile settings so you can toggle it yourself in two clicks instead of four....
But there is the Mobile Network one - HTC built in - when that is turned off, you can still get calls, and send txts. I use this toggle to do that - also can you not set a shortcut to do 3g to 2g only using bettercut? I'm sure you can, because you have that option in settings and bettercut can make a shortcut to any settings toggle.
Dayzee
Edit - Bettercut doesn't work with Hero Well, certainly not for creating and adding a shortcut to a system setting - will let the devs know...
Is it my imagination or does having the people widget on a home screen makes the device a little sluggish?
Is anyone else using touchdown? Not sure if that is slowing my device down and using battery a lot too?
Toggle Settings is a good app for controlling Daisys suggestions above, taskiller or Advanced Task Manager are essential for closing unwanted apps.
Couple of notes about apps that close stuff down like Taskiller and Task Manager - they can slow your fone down immediately after an end all, as the apps that need to run like TouchFlo have to restart - which they do, all by themselves - but it makes the fone prone to laggyness and force closing if you try to open stuff straight after.
If you get one that allows exclusions (I know advanced Task Manager does but dunno on others) then exclude TouchFLO and you'll get less proba after close all.
Also there were reports that one of the Taskiller apps messed with the long press home functions. Not sure on this tho...
Dayzee said:
If you get one that allows exclusions (I know advanced Task Manager does but dunno on others) then exclude TouchFLO and you'll get less proba after close all.
Click to expand...
Click to collapse
With Taskkiller you also have the option to exclude programs. It also has a widget you can tap to close all (except the ignored programs) The free version only allows two apps to be ignored. Exclude TouchFlo is a good suggestion.
Ce said:
With Taskkiller you also have the option to exclude programs. It also has a widget you can tap to close all (except the ignored programs) The free version only allows two apps to be ignored. Exclude TouchFlo is a good suggestion.
Click to expand...
Click to collapse
Try TaskPanel, it's free and doesn't seem to have any restrictions in its exclude list. You can also add a memory threshold when TaskPanel should automatically kill applications (configured through a separate list). And finally, it registers itself as an ongoing task and starts up automatically.
TaskPanel ist great... Thanks for that Tip. Have it running in the Background and now it Kills processes that are not in my Exclude List everytime the RAM goes below 50Meg.
My Hero is now (almost) Lag-Free.
Full charge at 7am and at 5pm, battery still at 94%.
How?
Turn off background data.
jhericurls said:
Full charge at 7am and at 5pm, battery still at 94%.
How?
Turn off background data.
Click to expand...
Click to collapse
Background data? As in what? Mobile network?
jhericurls said:
Full charge at 7am and at 5pm, battery still at 94%.
How?
Turn off background data.
Click to expand...
Click to collapse
Surely that disables all the sync services etc which is really what the phone is all about!
Also the Market won't work unless background data is enabled... It will save battery but a said, many services won't work unless you update manually.
I switched this off when in France so I didn't eat up my roaming data bundle.
The Jones said:
Is it my imagination or does having the people widget on a home screen makes the device a little sluggish?
Is anyone else using touchdown? Not sure if that is slowing my device down and using battery a lot too?
Click to expand...
Click to collapse
Ive also noticed this also with the people widget after i removed it as well as the Clock # 8 it severely reduced the lagginess of my Hero
Hi Dayzee & co.,
If you're looking for a good way to save battery power without having to turn wifi on and off manually, check out "Y5 battery saver"
Y5 - Battery Saver is an AndroidTM application which saves your battery by turning the Wifi off in locations where you have never been connected before. The application turns Wifi back on when you are back to known location. It will remember the locations automatically. All you have to do is turn the Wifi on and connect to the known Wifi network for the first time
Really cool, and works like a charm. Ok, you need to have your GPS turned on, but at least that one is useful everywhere you are (except inside buildings, fair enough)... whereas wifi isn't. Furthermore, wifi uses up more battery than GPS.
Concerning Advanced Task Killer (awesome!), you might want to check out this thread if you're sick of having to restart your phone each time you have to sync. In a few words: always put HTC sync in the Ignore list of the program. Unchecking it won't do.
Cheers!
Stop using Peep (set it all to manual update), remove the widget and start using Twidroid.
As well as a huge reduction in battery draw, you'll find your Hero is far more responsive than is ever was before.
The last few days my Hero has not been sluggish and the battery life has increased dramatically. Set to 30 mins update just like Peep was.
Here's my tip, that works really well, for me. I've tried a myriad of task managers, but finally settled for TaskPanel. It doesn't really matter what you use, I suppose, but I found it to be one of the clearest. Furthermore, advanced task killer's and taskillers "kill all" commands seemed to randomly kill the TouchFlo process as well, even though it was "ignored"...
I've come to the conclusion that cpu load rarely is a problem on this phone (in terms of finding a reason to possible lag), unless you are watching videos (which you probably won't, since it appears to be impossible to encode videos so they don't at least slow down a bit every five seconds) or listening to music.
Instead it's the amount of memory you have free for apps to use. I have no idea why, since I also live by the credo "memory free is memory wasted", so ideally my phone would have 5 megs of ram free and everything would work great. Now for some reason, my Hero desktop starts to lag substantially (as well as other gui-elements, such as long scrolling lists) whenever my memory goes below 40 megs.
I always hated the "favourite people" widget by Htc, so I closed it day one. Maybe that's why my htc experience has been pretty positive. I also closed the desktop widgets for SMS-messages and Mail, since they can't show MMS:es or HTML-mail and since they are both ridiculously slow at flicking from one message to the next. I also threw away the novelty clocks by Htc, since they animate too often and that slows down the interface while they are moving. Instead I opted for the iPhone-like clock "digital clock widget". Just don't force kill it, since it will stop updating and you will be stuck with a beautiful clock that shows the right time once every day.
So basically, my formula for a fluid hero experience is:
* Check your free memory with TaskPanel every now and then. If it goes below 50, prepare for slowdown. If it goes below 40, go on a killingspree.
* Register TaskPanel as an "ongoing service", so it shows up in your notification drawer. Now, if you can see your notification drawer (which you can't in the browser), then instead of clicking home to close stuff, open TaskPanel (or whatever) and kill the app you are about to stop using.
* With multitasking comes responsibility. Odds are, if you ever owned an iPhone, this is something you were *****in and moanin about. "Gimme multitasking, gimme!". Well now you've got it and so, learn to use it. Everything that is slow, badly programmed or a resource hog has gotta go, unless you really really need it. Beautiful clock animating slowly? Too bad! Ditch it.
Somebody said Android wold be very good at managing resources by itself and that sounds reasonable. However, I read numerous comments about people finding this to not be the case. Maybe in version 2.0. But for now I'm stuck killing of processes myself. It works for me and makes my UI snappy. And I can keep 3-5 apps running at the same time (that are my own choices, not mandatory apps that come with the UI) without problem. I regularly have babbler, androidirc, taskpanel, market, ebuddy, redditisfun running at the same time without problem. Just kill off apps you are not going to use for a long time.
Ok, sorry to be rambling, but this is my take on the situation. It might get resolved with the Hero update or with the 2.0 version of Android. Don't know, but until then, we need some tools and wild speculation won't solve anything. If you made it through the whole message, I would appreciate your comments - especially any positive experiences you have from "letting Android do its own cleaning". It sounds a little fishy that it would be bad a first, but after about a week, things will get really snappy? What if I boot my phone? Will I have to wait a week again for things to become fast?
-JJ
Speed and battery boosting Tips
Dayzee said:
Sometimes you are away from a charger and want to conserve what you have left, or are trying to run a resource heavy app without glitches (satnav) or trying to get a big update/download faster.
I thought we could post tips that either help with speed of the device or with saving battery - particularly if you know of apps or settings that slow the running down or eat battery.
I know these are quite obvious but I'll list some anyway to get us started
Turn these off for extra speed and batt :
Wireless General
GPS (you can leave location by network on for most stuff like weather apps)
Wifi - turning it off while you're out and about saves lots o batt. I also keep network notification off completely unless I'm in a new location looking for a wifi fix.
Bluetooth - set for off and undiscoverable
Mobile network - Set it to 2G for a big boost in battery life (and I've found, if the 3G is rubbish - I know, obvious, but I recently spent 20 mins moaning of no signal at all to send a tx at a gig, then realised I could flick to 2G and was away!!)
Data Sync
Google - You can turn of Auto sync and just sync manually when you choose
Background Data - Turning this off gives a huge battery boost, but gmail won't arrive in real time, so if you're expecting important mail don't turn it off.
On the sync option, if you know contacts and calendar are not changing that often you can uncheck these and sync manually every now and then
Apps that use Data Sync
Weather - check how often the app refreshes and set it to a longer time - some weather apps are by default set to refresh every 30 mins and this might not be needed most of the time.
Twitter and Facebook widgets and apps - again check the refresh periods, also notifications will Use batt more than no notifications.
Same probably applies for Exchange Sync but I don't use it.
Sound/Display - these things will save batt when you need it.
I think having Ring AND vibe will be more batt intensive, so maybe knock off the vibrate when you want to save battery
Keep Brightness low and lower screen timeout.
Turn off Auto rotation and animations and Notification Flash
Turning keypad tones off etc will save a bit too. It all adds up.
Turning Off TouchFLO
When running CoPilot, it helps to turn off wifi and some have reported that if you can toggle the Sense UI to the ordinary Android 3 screen home this helps too (Tho I've personally not had problems) To turn off Sense UI or Touchflo 7Screen home, you need to first go to settings-applications-manage applications and look for TouchFLO then clear defaults. After this, when you go to home, you'll be offered a choice of home or TouchFlo. To toggle back to Touchflo, press the home button again. To return it to default, just check the Use by default for this action, and then make your choice.
Post anything you've found to help or hinder speed, or to drain or boost battery life
Ta Dayzee xx
Click to expand...
Click to collapse
turning off allmost every things,then what reson to have a smart phone and spend 600$ for the device better, turn off your hero and keep in the pocket and turn it back on to use...keep in pocket with power off till next use.this is not the sulution .turning off everythings ........rether go with motorola razer v3.
I still don't see the point of using task managers and killing tasks. I just let the OS manage everything for me.
My Hero run very well indeed since I worked out that Peep was a real battery and resource hog.
I've just been for a 4 mile walk and used My Tracks to track the walk, Twidroid, Browser hot linked from tweets in Twidroid, answered a phone call and responded to a number of texts.
Looked at My Tracks a number of times to see what it was doing and to look at the satellite map. I like to point out things on the phone screen to the kids that they can see in real life - geeky but they think its cool.
Kept checking on how fast we were walking etc...
So screen was active quite a bit.
All over the space of 1hr 15mins with the GPS running all the time.
Hero never lagged once, battery used was around 10% (at a guess, maybe 12%).
Overall very impressed.
First of all i would like to thank all you chef's for the great menu you provide
Tastes are incredibly smooth and you use fresh ingredients all the time
What else could i ask?
On the second thought i can ask something
I have become irritating asking the same question in differnet roms
Maybe it is a problem in my touch pro
Why does my clock lose synchronisation?
One moment all ok and suddenly time stays stuck...
I repair it and all is good again
But suddenly this happens again
An one more thing
In some roms while i use gmt+2 athens it changes it by itself in [email protected]@#@ something i cannot remember
Thank you for the time you took reading it and for the time you take making these great roms
p.s
Maybe there are more with the same problem
If there are please state it to see that i am not alone in this cruel world
Me too
I am also facing the same issue nowadays. I am using RRE23016v3Manila ROM version. This is a new issue i got after flashing this.
wrong clock too
I have the same problem too with the clock..and all the appointments'time becoming error too..
This issue is solved in Manila 2.1. You can also fix it with this.
Ok with time zone
But i do not lose 1 hour
I lose 20 minutes for example
it is not a timezone problem
I saw this answered by deksels in another thread. Here is deksels answer:
Originally Posted by deksels View Post
Please take a look at Start --> Settings --> Sounds & Notifications and then under missed calls or text messages you can find flash for ... in time
Clock gets out of sync
Like others here, I face the same problem. At a certain moment I will loose sync of time. The amount the clock is off varies per event.
It is not a DST issue, but something else.
It seems that it occurs randomly, but mostly after an event (alarm or reminder) occured.
Any one any suggestion what is happening here?
Although it is claimed that the issue has been solved with Manila 2.1, it is still occurring sporadically. The only way to fix it is to set the clock right in Settings -> Clock & Alarms. Just do not touch the big clock in TF3D ;-)
Cheers...
and when i touch it when i talk on phone???
lol that's what i thought it was the problem
Wrong clock
i also experienced the same problem...it's not about timezone or manila.i use energy rom 3.0...it's so irritating when you realize you are late for something important as the clock stuck at certain time..maybe i should buy a watch someday
baang43 said:
i also experienced the same problem...it's not about timezone or manila.i use energy rom 3.0...it's so irritating when you realize you are late for something important as the clock stuck at certain time..maybe i should buy a watch someday
Click to expand...
Click to collapse
I'm having a similar issue and it's using 6.5 without Manila. The clock appears to stick and when I "tab" the power button to turn on the display, only then does it suddenly try to update the time on the display and it usually 1 - 2 minutes behind or forward on the Titantium/CHome Clock app than the "Top Bar" clock. This also causes issues when an alarm is set and goes off. Dismissing the alarm will sometimes cause the time to suddenly reverse one minute so the next minute, the alarm sounds again. This morning, it looped 3 times!
I just got my note and coming from the atrix with a notification light, I'm pretty let down this doesn't have one.
Does anyone know of an app or mod that can perhaps light up the soft keys instead? I know you can for the nexus S
erick161 said:
I just got my note and coming from the atrix with a notification light, I'm pretty let down this doesn't have one.
Does anyone know of an app or mod that can perhaps light up the soft keys instead? I know you can for the nexus S
Click to expand...
Click to collapse
get one of the custom roms in the dev section, then use BLN control app.
kaishi00 said:
get one of the custom roms in the dev section, then use BLN control app.
Click to expand...
Click to collapse
Well I just got the phone today, so I wanna do quite a bit of research before I go flashing this phone. I'm wondering if there's a more simple workaround
erick161 said:
Well I just got the phone today, so I wanna do quite a bit of research before I go flashing this phone. I'm wondering if there's a more simple workaround
Click to expand...
Click to collapse
Not without a custom rom. just mess around with the phone for a week or two to get a baseline feel for it then go custom and enjoy!
erick161 said:
Well I just got the phone today, so I wanna do quite a bit of research before I go flashing this phone. I'm wondering if there's a more simple workaround
Click to expand...
Click to collapse
you can use the NoLED app from the market but beware that you need to test and configure it to best liking, cause even though it might look like the screen is off is not, it puts dots in the screen as notification, so for the time being before you decide to flash a custom rom, give it a try, I used it for a bit but noticed that if I had a notification on for a long time it killed my battery significantly.
RoloRacer on Galaxy Note!
roloracer said:
you can use the NoLED app from the market but beware that you need to test and configure it to best liking, cause even though it might look like the screen is off is not, it puts dots in the screen as notification, so for the time being before you decide to flash a custom rom, give it a try, I used it for a bit but noticed that if I had a notification on for a long time it killed my battery significantly.
RoloRacer on Galaxy Note!
Click to expand...
Click to collapse
This. I would get emails in the middle of the night, triggered the NoLED icon and keep my screen on all night. I would go to bed with 90+% and it would drain to about 30% in a few hours. Thank god it had the schedule function so you can disable it when you don't plan on caring about a notification.
Missed Message Flasher, which works for a dozen or two apps and general notifications. For Calendar notifications only I've switched over to Calendar Snooze because it gives more options for vibration, plus adds many options to snooze that the stock Calendar doesn't. I still use MMF for text and some other notifications.
Thanks to all the quick replies. I might try MMF, but will probably just end up rooting/flashing. I cant help myself lol. This note needs ICS...badly
NoLED has worked fine for me for well over a year now. I think the propblem people are encountering is not that their screen is on, it's that their phone is not able to enter deep sleep mode. The technology behind the screen is what allows this app to work without zapping the battery within an hour. Also most people charge at night so this is not an issue. Also noLED has a widget that makes turning the feature on and off a simple task. My phone lasted over 24 hours with no charging and had the noLED notification on at night so there may be more at work for those having issues with it, as I said I only saw it prevented deep sleep but did not trigger "screen on" time in stats as only a few pixels were actually on. I do only use the dots, not the big icons.
Unfortunatly, noLED would be your best bet at this time, IMO. BLN support is sketchy at best. Just make sure you have noLED setup so that it won't keep the screen on for hours on end and your fine. I tried to get BLN support working for the longest time, it was flakey at best on some roms, and all out didn't work with ohters that claimed to have support for it. And with ICS coming out today ( or so they say, look in the dev section for the posts ), BLN support won't exist anyway for a bit
Check out this video. http://www.youtube.com/watch?v=yryzWJ0p_cE
BLN control seems to work best for me. Bought the pro version so I could have even more control over the keys
Hi all,
When I charge my HP TP running CM9 nightly, a clock screen is displayed automatically. I note that after my screen time out period of five minutes, the screen does power off, however when I wake up in the morning the screen is on displaying the clock screen - I guess email or some other notifications turn the screen back on.
Basically, can I change the behaviour so that when I put the TP onto the Touchstone, nothing special happens and this clock isn't displayed? I have an app that switches the screen off when the case is closed, and essentially this charging behaviour is interfering with this. I don't want the TP clock blazing away lighting the screen up all night.
Thanks,
Andy
Wow some refuse to do any work on their own....
If you want to shut the screen down all you have to do is hit the power button and the screen shuts down
As far as the Desk Clock app... You simply go into app manager and clear the defaults for it
Sent from my GT-I9100 using Tapatalk 2
Thank you for your reply - unfortunately the option to clear defaults for the clock is greyed out.
cdzo72 said:
Wow some refuse to do any work on their own....
Click to expand...
Click to collapse
I'm puzzled by your sarcasm - no, I can't figure this out by myself as I can't identify the configurable part of android that triggers this clock front end. I had Googled it but I can't find a suitable answer there either. Whilst I can shut the screen off with the power button, as per my original post when I wake up in the morning the screen has come back on.
Cheers!
Andysan said:
Thank you for your reply - unfortunately the option to clear defaults for the clock is greyed out.
I'm puzzled by your sarcasm - no, I can't figure this out by myself as I can't identify the configurable part of android that triggers this clock front end. I had Googled it but I can't find a suitable answer there either. Whilst I can shut the screen off with the power button, as per my original post when I wake up in the morning the screen has come back on.
Cheers!
Click to expand...
Click to collapse
Then you have something installed waking your TP that we have no way of troubleshooting without some type of log.... when you shut the screen down there is no reason for Android to turn it back on unless YOU have EXPLICITLY given an app YOU installed permission to do so. As far as the clock... when you set the TP on the Touchstone one of two things happens... a dialog box comes up with the apps that can by default be activated when placed on Touchstone OR YOU HAVE designated a default app to do this....
Now if YOU can't remember which app YOU ALLOWED to run then you have one of two choices.... go through all the apps in app manager clearing all defaults OR wipe all data and start from scratch and pay attention to what you press this time
Sent from my cm_tenderloin using Tapatalk 2
0
cdzo72 said:
Then you have something installed waking your TP that we have no way of troubleshooting without some type of log.... when you shut the screen down there is no reason for Android to turn it back on unless YOU have EXPLICITLY given an app YOU installed permission to do so. As far as the clock... when you set the TP on the Touchstone one of two things happens... a dialog box comes up with the apps that can by default be activated when placed on Touchstone OR YOU HAVE designated a default app to do this....
Now if YOU can't remember which app YOU ALLOWED to run then you have one of two choices.... go through all the apps in app manager clearing all defaults OR wipe all data and start from scratch and pay attention to what you press this time
Sent from my cm_tenderloin using Tapatalk 2
Click to expand...
Click to collapse
Thank you for your reply, but unfortunately you are wrong.
I only have the clock app installed that triggers when the device docks - no other apps respond to this event, therefore when I dock the device I don't get presented with the option/choice, it just displays the clock as there is no alternative. I've found the best solution to be to install 'Screen Off ' from the market. This has an option to act on the dock event, and now when I put the device on the dock I get given the choice as to whether to show the clock or to power off the screen. This works pretty much perfectly, and without the clock showing the screen stays off, instead of coming back on randomly after I shut it off - therefore, I don't think that the clock was coming back on before due to notifications from apps/emails, but be cause the clock app itself was triggering - possibly when the device reaches full charge or something and temporarily disconnects from the dock or something, I don't know. In summary, you need more than one app installed that is coded to respond to the dock event, otherwise when you dock the device android just defaults to the dock event and powers the screen back on periodically. I have never explicitly enabled this behaviour, and without installing another app it seemingly cannot be changed or disabled.
I thank you for taking the time to reply to my post, but I think you should learn something from this thread - just because a problem may seem to be user error doesn't necessarily mean that it is - your post is completely wrong which is fine as I appreciate that you are just trying to help, but by getting all aggressive over it you've just ended up looking a little stupid. The forums should be all about helping people, not ridiculing them - hopefully this post will serve to help anyone out with a similar predicament.
Cheers.
Ignore cdzo72 - he's one of the most sarcastic members of this forum. He seems to have a hate on for anyone who has an issue with anything, and can't solve it for themselves. You get used to him, and ignoring him.
I'm glad you found your solution.
Thanks for posting that man, beginning to think it was just me. Guess every forum has one - hopefully if anyone else comes across this thread it might solve their problem too.
Andysan said:
Thanks for posting that man, beginning to think it was just me. Guess every forum has one - hopefully if anyone else comes across this thread it might solve their problem too.
Click to expand...
Click to collapse
Yeah maybe they'll miraculously use the much talked about but seldom known to noobs SEARCH fumction
Sent from my cm_tenderloin using Tapatalk 2
cdzo72 said:
Yeah maybe they'll miraculously use the much talked about but seldom known to noobs SEARCH fumction
Sent from my cm_tenderloin using Tapatalk 2
Click to expand...
Click to collapse
Er...dude, if your implying i didnt use the search beore psting then please show me where the pre-existing thread with my issue and resolution clearly described is. If not, well I'm not gonna sit up and play forum wars with you all night, I've got work in the morning.
Saw this post and was excited as I was looking for this same thing. Too bad someone had to ruin this post. Is it just the touchpad forum? Don't seem to encounter this on the other xda forums.
Sent from my Galaxy Nexus using xda premium
Andysan said:
Thank you for your reply - unfortunately the option to clear defaults for the clock is greyed out.
I'm puzzled by your sarcasm - no, I can't figure this out by myself as I can't identify the configurable part of android that triggers this clock front end. I had Googled it but I can't find a suitable answer there either. Whilst I can shut the screen off with the power button, as per my original post when I wake up in the morning the screen has come back on.
Cheers!
Click to expand...
Click to collapse
The clock app doesn't trigger itself. Mine charges all night and never turns back on. That said, it is almost impossible to move the pad while it's on the TS without charge disconnecting and reconnecting. And that will trigger the clock app. So, if you have the TS on an unstable surface that allows ir to be inadvertently "jiggled", that could cause the clock to turn back on.
T-Keith said:
Saw this post and was excited as I was looking for this same thing. Too bad someone had to ruin this post. Is it just the touchpad forum? Don't seem to encounter this on the other xda forums.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Hey Man,
I don't know if it affects other devices to be honest. On my phone the clock app is configurable, but on my Cyanogenmod9 HP TP tablet it isn't something that you can change the behaviour of (if you tap the stock 'Clock' app it just locks the screen and displays a clock, you cant set any options like on my SGSII). I don't know if this is a feature of tablet OS'es in general, or just the CM iteration of Ice Cream Sandwich.
Either way, the 'Screen Off' app references working with a number of docks (blurb specifically references Sony ones) so I'd give it a shot and hopefully it will work for you.
I had that problem too, it was very annoying. I installed dock no op from the market and it finally stopped waking me up. That seems like the only option since cm9 doesn't let you set the dock behavior.
Hi all, apologies if this has been answered else where.
Currently running a Lenovo S20-30 Win 10 dual boot with the latest Beta release. Surprisingly really enjoying it. The only real issue I am having is it waking after it goes to sleep. Mouse and cursor frozen and wont fully wake unless a reboot.
Is anyone else having similar issues and have a possible solution?
Thanks and appreciate the help.
Sent from my 20421 using Tapatalk
Yes and no solution as off now..
Sent from my SM-N920T using Tapatalk
My lenovo T500 reboots when it goes to sleep under Remix. My current "fix" is running a "stay alive" app I purchased for $2 (the free ones had too many ads or not enough functionality) that will dim the screen but not let it sleep if it has wall power or a good charge. I am also surprised how much I am enjoying it; the T500 is a screaming machine with Remix. It was barely adequate for web and RDP under Windows. I am getting incredibly good performance in Netflix, TWC TV app, Chrome, Dolphin and Microsoft RDP under Remix.
arbarnhart said:
My lenovo T500 reboots when it goes to sleep under Remix. My current "fix" is running a "stay alive" app I purchased for $2 (the free ones had too many ads or not enough functionality) that will dim the screen but not let it sleep if it has wall power or a good charge. I am also surprised how much I am enjoying it; the T500 is a screaming machine with Remix. It was barely adequate for web and RDP under Windows. I am getting incredibly good performance in Netflix, TWC TV app, Chrome, Dolphin and Microsoft RDP under Remix.
Click to expand...
Click to collapse
Can you share link to app?..
egren58 said:
Can you share link to app?..
Click to expand...
Click to collapse
To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!
so...
details?id=com.synetics.stay.alive
you have to figure out the rest.
I made sure it worked at least somewhat before contributing to get the additional features. I am really hopeful that a later beta or some other app will give me more control. My notebook has a screen off mode that is better than just dimming but isn't sleep. I wish I could get it to use that. The dimming that the Stay Alive app does was enough that the screen would not keep me up at night but there is enough of a glow to know it is on. But it makes Remix more usable now.
I had this issue too. I noticed if you tap the power button once, the screen comes back on but the mouse won't still work sometimes. If you just tap the power button a 2nd time after the screens on, it would start working again. But I did have trouble w/ wifi coming back on after sleep. I had to toggle it off/on. Let me know if the double tap of the power button fixes it for you too?
BTW, I just added another little app - LockScreen (a free one). That way I can easily lock the screen if I walk away for a few minutes, have it dim but not sleep and reboot.
Tapping the power button again works for me to.
Tap, double tap not working here. Shame. Hopefully a fix soon.
Sent from my 20421 using Tapatalk
Another update on my sleep issue and workaround...
I don't know how things changed; I may have tripped a setting or something but using the LockScreen app was putting it to sleep and triggering the reboot instead of giving the Stay Alive app a chance to catch it, so I quit using the LockScreen and just let it time out and then the Stay Alive app would dim the screen and keep it from timing out. So no reboot, but unfortunately no lock screen; I wanted it to lock. Poked around some more and found an app listed as Hidden Settings for Galaxy but it isn't really Galaxy specific. One of the the things it does is let you set up and enable Daydream mode. It turns out Daydream doesn't work properly on Remix, but it fails in a good way. If you select the clock (or anything else, but stay away from full screen stuff as sometimes that will stay in the way for several seconds) and set it for both docked and charging, then when the screen timeout is reached the clock will show for a couple of seconds and then it will go to the lock screen (assuming you enabled, I guess), not go to sleep and Stay Alive dims the screen. Clunky and convoluted, but it ends up doing exactly what I wanted.
ETA - One other little nit - After it dims on the lock screen, focus is set to the text box and you just have to start typing the password to get the screen to brighten and unlock. Clicking does not cause the screen to brighten, which worried me at first (thought it was hung).
arbarnhart said:
My lenovo T500 reboots when it goes to sleep under Remix. My current "fix" is running a "stay alive" app I purchased for $2 (the free ones had too many ads or not enough functionality) that will dim the screen but not let it sleep if it has wall power or a good charge. I am also surprised how much I am enjoying it; the T500 is a screaming machine with Remix. It was barely adequate for web and RDP under Windows. I am getting incredibly good performance in Netflix, TWC TV app, Chrome, Dolphin and Microsoft RDP under Remix.
Click to expand...
Click to collapse
Thanks, Stay Alive works. Be interesting to see what it does to battery life. Hopefully a fix will come.
Sent from my 20421 using Tapatalk
Scooterss said:
Thanks, Stay Alive works. Be interesting to see what it does to battery life. Hopefully a fix will come.
Click to expand...
Click to collapse
Just be careful poking around at settings; I did something to make mine have issues with being locked after I had it working. More tweaks got it okay(ish) again. This is not a good solution for battery use; I don't think there really is one if standby doesn't work. Android/Remix doesn't seem to offer levels of powering off. What I would like to do is power off the screen, spin down the disk but leave the processor and wifi powered.
arbarnhart said:
Just be careful poking around at settings; I did something to make mine have issues with being locked after I had it working. More tweaks got it okay(ish) again. This is not a good solution for battery use; I don't think there really is one if standby doesn't work. Android/Remix doesn't seem to offer levels of powering off. What I would like to do is power off the screen, spin down the disk but leave the processor and wifi powered.
Click to expand...
Click to collapse
Yep going back to sleep again and not waking up properly with SA. Think will give up until a fix.
Sent from my SM-N9005 using Tapatalk
Mine is only doing that now on battery and it is usually on wall power. As I use it on battery so rarely, the simple answer is to just set the screen timeout higher when I do. On an older notebook like mine, a battery gives you freedom to move around the house/office with the machine running and maybe run without plugging in for two or three hours. It's my semi-lightweight UPS.
Anyway, I am not giving up. This is the only thing not working perfectly for me. My camera, mic, bluetooth, mouse and wifi all work fine. I stream videos in Youtube, Netflix, TWC TV, Amazon, FB and browsers with good sound and picture; no lag. I connect to work with Microsoft RDP and have less lag than using RDP in Windows. Yesterday I booted over to Windows to increase the size of my data.img (and had no trouble with that) and that definitely hardened my resolve. It is hard to believe I was putting up with that kind of speed just a few days ago. Now that I know I don't have to it seems worse.
After more research, I am back again with what I think is the final answer. I should and likely will write an app to undo this if my battery gets really low, but all you have to do if you never want your machine to go into sleep mode is press Alt-F1 to get the console and then do something like this:
# echo nosleeptilbrooklyn >/sys/power/wake_lock
And then Alt-F7 to get back. I did that as a test, unplugged from the charger and let it sit about 10 minutes with display timeout at 5 minutes. 5 minutes in the screen went dark. That used to be followed by a reboot about 5 seconds later. It did not reboot. When I woke it, it did initially show the main screen and then blanked it and brought up the password screen. For some reason I had to click before I could type (usually don't have to). Anyway, the above "fix" worked. To undo it, I need to just do this:
# echo nosleeptilbrooklyn >/sys/power/wake_unlock
There is a programmatic interface to do pretty much the same thing but with more options and I am thinking I may write something to use that to set the lock and then check the battery on a timer and unlock if it falls below 20% or some other setting.
EDIT TO ADD - A little more poking around yielded info that pretty much all manufacturers have had battery protection for several years now and will not let the battery run down into the kill zone even if the OS is frozen or even if it actively tries to stay alive. I would still advice checking your BIOS and/or doing some research on your particular system but it is likely safe to just leave it locked if you only want it shut down, hibernate or go into standby when you specifically choose that interactively.
Wake up from sleep using alarm manager is not working in Remix OS
Dear All,
I am working on project where I am able to put PC on sleep using alarm manager with wake lock but it is not waking up.
In remix OS 3.0.206 on intel machine.
Seek some ones support.
just close the lid of laptop if u r using lappy when u r not using lappy it will get locked never goes hangs