Related
Hi guys,
At the moment i have SSPL.
I want to install HSPL3 - 2.08
but i cant unstall the sspl.
when i try to install hspl, i get error, BAD SPL VERSION
to install my sspl i used the folowing steps :
1. Remove SD (and remove Application Data and Program Files folders from it using SD card reader)
2. Remove HSPL with HSPL2_RUN.exe (flash SPL 1.66.0000 with HSPL2_RUN.exe)
3. PowerOff the phone
4. Boot to bootloader (VolDown+PowerOn) and when it shows "USB" flash stock ROM by running matching RUU_Leo_S_HTC_XXX_3.14.XXX_Radio_15.42.50.11U_2.15 .50.14_LEO_S_Ship.exe (get yours HERE or for Orange UK/FR HERE)
5. Hard Reset (when phone starts booting after step 4, remove the battery, insert it back press VolUp+VolDown and still holding both press PowerOn and follow the instructions)
6. Boot to homescreen.
7. Run SSPL_RUU.exe with Artemis v40 RUU_Signed_0409.nbh in the same folder - YOU HAVE TO BE ON HOME SCREEN, NOT BOOTLOADER (this took me 3 tries until succeded - yes - nerve wrecking, but works). If it doesn't work (hangs on black screen for more than 2min or stays at 0%) remove the battery and try again. If still doesn't work - try solutions in NOTE below.
8. Hard reset (instructions in step 5)
9. when on homescreen - softreset.
10. Insert SD
Any help?
you dont have sspl, 'sspl - soft secondary program loader' is a one shot version of 'hspl - hard/hacked secondary program loader'.
You have 'spl - secondary program loader' - stock spl.
If you followed those steps you now have spl 3.03 and so hspl will not work. You must downgrade your phone to an earlier rom/spl version. 1.66 for example. USB will be fine so long as its your correct stock rom, , any version except 3.14.
samsamuel said:
you dont have sspl, 'sspl - soft secondary program loader' is a one shot version of 'hspl - hard/hacked secondary program loader'.
You have 'spl - secondary program loader' - stock spl.
If you followed those steps you now have spl 3.03 and so hspl will not work. You must downgrade your phone to an earlier rom/spl version. 1.66 for example. USB will be fine so long as its your correct stock rom, , any version except 3.14.
Click to expand...
Click to collapse
how can i downgrade?
its not working
as i said, get your stock rom, any version, but it must be correct for your phone, and flash it usb is fine. that's it.
AAh ok thanks it worked
I flashed original 1.66 ROM
No w i was able to install HSPL
Thanks!!!
no worries.
Hmmmm, I have the 3.14 ROM with 3.03.000 SPL installed.
What I`m trying to do is Install NAND Android. But to do this I need HSPL 2.08.
Tried downloading one of the older stock roms (1.66) and then attemped to flash via SD and through the .exe file directly.
From the .exe file it boots to the tri color screen and then reaches the progress bar screen. However it sticks there and the errors out with a code : 294.
Through the SD method after the phone detects the .nbh file it comes back with a "28002 : Not allow" error message.
Have tried this with varoius types of Mem cards but no luck.
I then tried SSPL with 1.66 as the ROM and i got it to flash the ROM with no problems but the HSPL still sticks at 3.03. And thats expected since SSPL is like a one shot go at flashing a ROM different from your region.
Question : Since this isnt working, will a task 29 help in this case? From what I understand it formats the filesystem that holds the OS. By doing so, will I then be able to flash one of the older Roms so I can install HSPL 2.08?
Any help will be appreciated.
xcsi said:
Hmmmm, I have the 3.14 ROM with 3.03.000 SPL installed.
What I`m trying to do is Install NAND Android. But to do this I need HSPL 2.08.
Tried downloading one of the older stock roms (1.66) and then attemped to flash via SD and through the .exe file directly.
From the .exe file it boots to the tri color screen and then reaches the progress bar screen. However it sticks there and the errors out with a code : 294.
Through the SD method after the phone detects the .nbh file it comes back with a "28002 : Not allow" error message.
Have tried this with varoius types of Mem cards but no luck.
I then tried SSPL with 1.66 as the ROM and i got it to flash the ROM with no problems but the HSPL still sticks at 3.03. And thats expected since SSPL is like a one shot go at flashing a ROM different from your region.
Question : Since this isnt working, will a task 29 help in this case? From what I understand it formats the filesystem that holds the OS. By doing so, will I then be able to flash one of the older Roms so I can install HSPL 2.08?
Any help will be appreciated.
Click to expand...
Click to collapse
i had similar issues, i used task29 that contains blank .nbh. you must have hspl 2.08 first to run this then install any custom ROM through PC or your branded ROM through SD card it should work or install Android then. i hope this helps.
here you go
http://forum.xda-developers.com/atta...0&d=1268260144
xcsi said:
Hmmmm, I have the 3.14 ROM with 3.03.000 SPL installed.
What I`m trying to do is Install NAND Android. But to do this I need HSPL 2.08.
Tried downloading one of the older stock roms (1.66) and then attemped to flash via SD and through the .exe file directly.
From the .exe file it boots to the tri color screen and then reaches the progress bar screen. However it sticks there and the errors out with a code : 294.
Through the SD method after the phone detects the .nbh file it comes back with a "28002 : Not allow" error message.
Have tried this with varoius types of Mem cards but no luck.
I then tried SSPL with 1.66 as the ROM and i got it to flash the ROM with no problems but the HSPL still sticks at 3.03. And thats expected since SSPL is like a one shot go at flashing a ROM different from your region.
Question : Since this isnt working, will a task 29 help in this case? From what I understand it formats the filesystem that holds the OS. By doing so, will I then be able to flash one of the older Roms so I can install HSPL 2.08?
Any help will be appreciated.
Click to expand...
Click to collapse
Is your phone branded (T-Mobile, Vodafone, O2, Orange, etc) and to what country?
If you are using a T-Mobile USA HD2, then you may try and flash the 2.08 TMOUS ROM.
Hey,
I want to do the exact same thing and I am locked on Orange? Is it possible to downgrade?
lhayati said:
Hey,
I want to do the exact same thing and I am locked on Orange? Is it possible to downgrade?
Click to expand...
Click to collapse
If you can find the previous stock ROM than yes. But it's a hard one to find (Orange UK)
Problem with spl3.03
Hello all. I trying today upgrade my htc leo to 3.14 rom but right now my htc is locked and I cant downgrade to any version . I trying to use all countries software for downgrade but allways I have information "NOT ALLOW"
My S/N is HT04YNW00034
Please help me.
dalisman said:
Hello all. I trying today upgrade my htc leo to 3.14 rom but right now my htc is locked and I cant downgrade to any version . I trying to use all countries software for downgrade but allways I have information "NOT ALLOWED"
My S/N is HT04YNW00034
Please help me.
Click to expand...
Click to collapse
Mate, do you want to upgrade or downgrade? You're statement is confusing
what do you mean "locked"?
As long as you flash the CORRECT STOCK ROM, you can upgrade or downgrade.
What you have to do first is find the CORRECT STOCK ROM".
you can't try all countries version, it is dangerous.
Go to htc website and select the country where your hd2 come from, and download the stock rom using your SN.
If you can't find the CORRECT STOCK ROM, the only alternative is using gold card method.
Good luck
I want to downgrade to version 1.66 but I cant beause always when I try to downgrade (using sdcard) I see information "not allow" . lock = Software update failed . please try again.
what is this gold card ?
dalisman said:
I want to downgrade to version 1.66 but I cant beause always when I try to downgrade (using sdcard) I see information "not allow" . lock = Software update failed . please try again.
what is this gold card ?
Click to expand...
Click to collapse
I think you haven't found th CORRECT STOCK ROM, that is why "not allow"
Gold card is a method to enable you to flash stock rom from other country (it is useful in a situation where you can't find the CORRECT STOCK ROM.
There is a thread for gold card, just using search button to find it out
Good luck
I allready check I think all countries because Im not sure from which country is my phone. and always on htc website I see information software is not for this S/N
dalisman said:
I allready check I think all countries because Im not sure from which country is my phone. and always on htc website I see information software is not for this S/N
Click to expand...
Click to collapse
Is it branded phone (telstra, Tmobile, orange, etc)? if yes, you should go to their website instead of htc website.
However, if you still fails, then the only alternative is using gold card method.
I never experience for this though I read it many times, so I would suggest you to search the forum. There is a thread title [GOLD CARD], just use search button.
Good luck
hello
I read about gold card and I understand everything, but my problem is :
my htc is detected by system but not detected by active sync
and I cant make gold card
dalisman said:
hello
I read about gold card and I understand everything, but my problem is :
my htc is detected by system but not detected by active sync
and I cant make gold card
Click to expand...
Click to collapse
I would suggest you to post this at the gold card thread, mate
Maybe there's someone can answer that.
Good luck
Howdy all,
Had ANdroid on the HD2 and wanting to revert back to the original ROM.
Have downloaded a stock rom (3.14 WWE) and have used task 29 to clean up the phone.
Trying to install the rom gives an error: 209: Invalid Vendor ID.
THe phone shows it get to 1% and then reset itself.
I have tried 1.32 Radio, 1.66 and 2.08, all giving the same result (Except for 2.08 wouldnt even get to 1%)
Completely stuck here...
Any help would be great.
Also, read about flashing from SD, but because i've used task 29 the phone has no ROM to boot to. Plus I couldnt figure out how to extract the RUU_signed.nbh from the original .exe
Maybe i've done something wrong?
Any help would be great.
Cheers
Oky, lets start with the beginning.
Error: 209: (Invalid Vendor ID) means that the stock ROM you are try to install isn't the right one. Probably you have a branded device; ore you need to install a otter aria Rom.
Secondly Stock ROM 3.14 isn't compatible with HSPL; so you need to remove it (use HSPL2_RUN.exe to remove HSPL and select SPL 1.66 instead.)
PS, you don't need to install separately a Radio version. Ons you have install Stock Rom 3.14 you will have automatic Radio 2.15.50.14
The important thing is to install a correct stock ROM who match with your device. (witch was your official ROM version?)
kurt-willems said:
Oky, lets start with the beginning.
Error: 209: (Invalid Vendor ID) means that the stock ROM you are try to install isn't the right one. Probably you have a branded device; ore you need to install a otter aria Rom.
Secondly Stock ROM 3.14 isn't compatible with HSPL; so you need to remove it (use HSPL2_RUN.exe to remove HSPL and select SPL 1.66 instead.)
PS, you don't need to install separately a Radio version. Ons you have install Stock Rom 3.14 you will have automatic Radio 2.15.50.14
The important thing is to install a correct stock ROM who match with your device. (witch was your official ROM version?)
Click to expand...
Click to collapse
Sorry i meant SPL.....
Bought the phone from Mobicity and it was imported from Thailand originally....I have previously installed this exact same ROM i am trying to install now....
but after putting Andriod on the device...trying to revert it back is proving impossible.....
I am giving the phone to a friend and thats why i want a stock ROM back on it.....
ftosam said:
Sorry i meant SPL.....
Bought the phone from Mobicity and it was imported from Thailand originally....I have previously installed this exact same ROM i am trying to install now....
but after putting Andriod on the device...trying to revert it back is proving impossible.....
I am giving the phone to a friend and thats why i want a stock ROM back on it.....
Click to expand...
Click to collapse
Stock ROM 3.14 WWE (3.14.413.2) can't be install on a Thailand Rom version !?
Secondly Task 29 isn't compatible with SPL 3.03 neater.
Thirdly I don't see way you need to revers back to a stock ROM (because you mention that Android was the reason (Android isn't install on your device, but on SD. So it don't change your internal ROM))
Okay; what you can try to do is flashing over SD.
but you need to use a original stock ROM and not the WWE (3.14.413.2) you need the version of Thailand (if this was your original!?) (Asia_WWE_3.14.707.3)
- Download your original stock ROM
- Use WinZip to extract it; and extract the RUU_signed.nbh file
- Rename the .nbh file to "leoimg.nbh" place it on a SD (take a 2GB SD) who was been format (FAT32)
- Shut Down your device, enter your SD, hold volume down button, and shortly press on the power button.
- follow the instructions on your screen.
But like mention early'r you need to use the right stock ROM version!
kurt-willems said:
Stock ROM 3.14 WWE (3.14.413.2) can't be install on a Thailand Rom version !?
Secondly Task 29 isn't compatible with SPL 3.03 neater.
Thirdly I don't see way you need to revers back to a stock ROM (because you mention that Android was the reason (Android isn't install on your device, but on SD. So it don't change your internal ROM))
Okay; what you can try to do is flashing over SD.
but you need to use a original stock ROM and not the WWE (3.14.413.2) you need the version of Thailand (if this was your original!?) (Asia_WWE_3.14.707.3)
- Download your original stock ROM
- Use WinZip to extract it; and extract the RUU_signed.nbh file
- Rename the .nbh file to "leoimg.nbh" place it on a SD (take a 2GB SD) who was been format (FAT32)
- Shut Down your device, enter your SD, hold volume down button, and shortly press on the power button.
- follow the instructions on your screen.
But like mention early'r you need to use the right stock ROM version!
Click to expand...
Click to collapse
Thanks! that worked, but now it is stuck in Taiwanese ? is there a way to change it to english, as when i purchased the phone it was all in english?
ftosam said:
Thanks! that worked, but now it is stuck in Taiwanese ? is there a way to change it to english, as when i purchased the phone it was all in english?
Click to expand...
Click to collapse
Based on the fact that stock ROM 3.14 use SPL 3.03 who isn't compatible with HSPL you can't change your stock ROM version by using HSPL.
But if you used the GoldCard technique you can install a otter stock ROM version.
kurt-willems said:
Based on the fact that stock ROM 3.14 use SPL 3.03 who isn't compatible with HSPL you can't change your stock ROM version by using HSPL.
But if you used the GoldCard technique you can install a otter stock ROM version.
Click to expand...
Click to collapse
HSPL is not on my phone, only SPL 1.66 ...... I had to flash using USB as SD card way would not work .....
There must be a way of doing this only because when i received my phone it was in english so i really dont understand,,,,i just want a stock ROM in english.....
ftosam said:
HSPL is not on my phone, only SPL 1.66 ...... I had to flash using USB as SD card way would not work .....
There must be a way of doing this only because when i received my phone it was in english so i really dont understand,,,,i just want a stock ROM in english.....
Click to expand...
Click to collapse
Sorry sir, I can't follow you
You mentioned to have install Stock rom 3.14 correctly; but now you mention to have "SPL 1.66"
If you have install stock ROM 3.14 correctly like mention before you will have SPL 3.03!
And like I mention before if you will install latest stock ROM 3.14 WWE (3.14.413.2) on your Taiwanese device (x.XX.707.x) you need to use the GoldCard technique!
We dont have spl 3 could that be why the other ROMs woulnt work?
How do i get Spl 3?
ftosam said:
We dont have spl 3 could that be why the other ROMs woulnt work?
How do i get Spl 3?
Click to expand...
Click to collapse
When you install stock ROM 3.14 correctly it will upgrade automatically your SPL version to 3.03!
But it seems fore one ore a other reason it didn't do it correctly.
Connect your device by active sync, and run "RUU_Leo_S_hTC_Asia_WWE_3.14.707.3" as administrator, to install it again.
I don't know from where you get the original stock ROM; but to be sure download it again: RUU_Leo_S_hTC_Asia_WWE_3.14.707.3
I have no idea why it is still not working getting the same error as before, the only ROM that will install is the one that is not in english
I wont work it still gives me the same error as before invalid vendor .....
I dont know how to fix this i just want a stock ROM in english....
ftosam said:
I wont work it still gives me the same error as before invalid vendor .....
I dont know how to fix this i just want a stock ROM in english....
Click to expand...
Click to collapse
ftosam said:
I have no idea why it is still not working getting the same error as before, the only ROM that will install is the one that is not in english
Click to expand...
Click to collapse
Sir did you listen/follow my previous instructions!!!???
You can't install a WWE stock ROM (3.14.413.2) on your Taiwanese device (x.XX.707.x) you need to use the GoldCard!!!
It didnt work, it still gives error and i tried the goldcard way but it doesn't load anything i quickly flashes a screen that says loading and then it goes back to the boot loader and just stays there.....
ftosam said:
It didnt work, it still gives error and i tried the goldcard way but it doesn't load anything i quickly flashes a screen that says loading and then it goes back to the boot loader and just stays there.....
Click to expand...
Click to collapse
I have the impression that you are doing something that's isn't correct.
Lot of peoples who I know have used the Goldcard technique; and all without issues.
Ended up getting the goldcard to work (Used a different SD Card)....
However it STILL comes up with the same error. (If I try flashing wwe Asia from the sd card, it says " Not Allowed")
We have previously used all sorts or ROMs on this phone... but the same ROMs now seem to be giving this Vendor Error... It just doesnt make sense...
hi all
Is there a way to break hspl 3.03.0000 there?
Break HSPL? Be more specific.
bricked my leo2??
hello, happy new year for every one
i have the 3 color screens after flashing my leo with the last official rom by sd card.... the spl is 3.03... so i can't flash with 2.08 hspl .... and i have the message rom update error....
i would like to know if i can repair my leo with a hspl 3.03... and if exist....
thanks
ligan35 said:
hello, happy new year for every one
i have the 3 color screens after flashing my leo with the last official rom by sd card.... the spl is 3.03... so i can't flash with 2.08 hspl .... and i have the message rom update error....
i would like to know if i can repair my leo with a hspl 3.03... and if exist....
thanks
Click to expand...
Click to collapse
Install the old 1.72 etc ROM through SD card and it will replace the SPL then you can put HSPL 2.08 for your desired Custom ROM. I hope this helps.?
Yup its simple go to shippedroms.com ... get ur stock rom... flash it... and ya then flash the hspl and radio
Sent from my HTC HD2 using XDA App
Hmmmm, I have the 3.14 ROM with 3.03.000 SPL installed.
What I`m trying to do is Install NAND Android. But to do this I need HSPL 2.08.
Tried downloading one of the older stock roms and then attemped to flash via SD and through the .exe file directly.
From the .exe file it boots to the tri color screen and then reaches the progress bar screen. However it sticks there and the errors out with a code : 262.
Through the SD method after the phone detects the .nbh file it comes back with a "28002 : Not allow" error message.
Have tried this with varoius types of Mem cards but no luck.
Is it actually possible to downgrade a 3.03 SSPL?? I read in some forums here that it isnt.
Question : Since this isnt working, will a task 29 help in this case? From what I understand it formats the filesystem that holds the OS. By doing so, will I then be able to flash one of the older Roms so I can install HSPL 2.08?
xcsi said:
Hmmmm, I have the 3.14 ROM with 3.03.000 SPL installed.
What I`m trying to do is Install NAND Android. But to do this I need HSPL 2.08.
Tried downloading one of the older stock roms and then attemped to flash via SD and through the .exe file directly.
From the .exe file it boots to the tri color screen and then reaches the progress bar screen. However it sticks there and the errors out with a code : 262.
Through the SD method after the phone detects the .nbh file it comes back with a "28002 : Not allow" error message.
Have tried this with varoius types of Mem cards but no luck.
Is it actually possible to downgrade a 3.03 SSPL?? I read in some forums here that it isnt.
Question : Since this isnt working, will a task 29 help in this case? From what I understand it formats the filesystem that holds the OS. By doing so, will I then be able to flash one of the older Roms so I can install HSPL 2.08?
Click to expand...
Click to collapse
Task 29 will not work with SPL 3.03.
You need to go to HTC's website and use your phone's serial number to download an older version of the ROM - you will only be allowed to download ROMs which are allowed for your phone. You cannot download a HTC stock ROM if your phone is restricted to a branded (phone operator's) ROM. You should be able to get a 1.66 or 1.72 or 2.08 or 2.10 ROM (dependant upon branding and country).
Put the phone into BootLoader mode, then connect to your computer and run the downloaded file.
it works!!!
download old original rom like 1.48.479.1_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
flash it via activesync/ win mobile center(win7)
it will downgrade 3.03.0000 to spl 1.42.0000
Thanks a lot for info!
Hey any clue how downgrading from a indian rom would be possible?
sudeep6258 said:
Hey any clue how downgrading from a indian rom would be possible?
Click to expand...
Click to collapse
Install the 1.47 stock rom
Thank you all
My problem was solved with downgrade
cotulla's but please fix the problem with hacking.
dacochir said:
Thank you all
My problem was solved with downgrade
cotulla's but please fix the problem with hacking.
Click to expand...
Click to collapse
lol, nice timing, its already solved. HSPL4 was released a few days ago, see link in my sig. Works with spl 3.03.0000
samsamuel said:
lol, nice timing, its already solved. HSPL4 was released a few days ago, see link in my sig. Works with spl 3.03.0000
Click to expand...
Click to collapse
Thanks for this message!
I just received my device back from repair, worried about the 3.03.0000
Awesome i don't have to worry about that anymore
Help me please and fast .. am in need .. i tied to uninstaller the HSPL everything done step by step.. but just after the black screen with the warning sine i get an error saying not allowed and the auto restart to Bootloader witch says Upgrade ROM code error Please try again... What now ?
isark said:
Help me please and fast .. am in need .. i tied to uninstaller the HSPL everything done step by step.. but just after the black screen with the warning sine i get an error saying not allowed and the auto restart to Bootloader witch says Upgrade ROM code error Please try again... What now ?
Click to expand...
Click to collapse
Try to flash orginal stock rom it will overwrite your spl to the original.
nbee said:
Try to flash orginal stock rom it will overwrite your spl to the original.
Click to expand...
Click to collapse
Yes a Official ROM will revert SPL but it will only do this if you flash it via SD card it will not revert HSPL if you flash it via USB.
T-Macgnolia said:
Yes a Official ROM will revert SPL but it will only do this if you flash it via SD card it will not revert HSPL if you flash it via USB.
Click to expand...
Click to collapse
Dear T-macgnolia,
A have flashed my device via USB under bootloader mode and I got the original spl back.
-------------------
isark, if you choose reverting OSPL via SD method, make sure that you have formated your SD card as FAT32.
Regards,
N
nbee said:
Dear T-macgnolia,
A have flashed my device via USB under bootloader mode and I got the original spl back.
Click to expand...
Click to collapse
I am not trying to discredit you nbee but educate you. if you flashed a official ROM via USB and had SPL and not HSPL then you must have never had HSPL in the first place as that is one of the reasons for having HSPL. HSPL stands for Hard Secondary Program Loader. The Hard means that it will not get overwritten with SPL (Secondary Program Loader) when flashing, and I quote this straight from the HSPL thread.
- This HSPL will not get overwritten when flashing a full NBH with SPL via RUU.
Click to expand...
Click to collapse
Hear is a link to the thread if you want to visit it. Also visit my guide I have linked in my sig to get a more complete understanding of SPL and HSPL. The reason why flashing via SD card does overwrite HSPL is you are not using a ROM update utility(RUU) you are using the HD2 itself to flash the ROM and HD2 is only programed to flash everything included in the .nbh file. When you use the ROM update utility it checks your phone first to see what set parameters/protocols matches you HD2 then flashes only what checks out and matches these parameters/protocols. Hope this helps you underrstand why I said to flash via SD card.
Cheers
T-Macgnolia said:
I am not trying to discredit you nbee but educate you. if you flashed a official ROM via USB and had SPL and not HSPL then you must have never had HSPL in the first place as that is one of the reasons for having HSPL. HSPL stands for Hard Secondary Program Loader. The Hard means that it will not get overwritten with SPL (Secondary Program Loader) when flashing, and I quote this straight from the HSPL thread.
Hear is a link to the thread if you want to visit it. Also visit my guide I have linked in my sig to get a more complete understanding of SPL and HSPL. The reason why flashing via SD card does overwrite HSPL is you are not using a ROM update utility(RUU) you are using the HD2 itself to flash the ROM and HD2 is only programed to flash everything included in the .nbh file. When you use the ROM update utility it checks your phone first to see what set parameters/protocols matches you HD2 then flashes only what checks out and matches these parameters/protocols. Hope this helps you underrstand why I said to flash via SD card.
Cheers
Click to expand...
Click to collapse
Hi T-Macgnolia,
You are absolutely right, and really sorry for misunderstanding some basic facts. I have flashed more than one ROMs during last weeks. I tried to call back my remembrances, and I get in the swing of that I have re flashed original ROM with one another original ones. So in fact OSPL was rewritten with an OSPL.
My fault.
Dear isark, the right choose is SD flash as Hi T-Macgnolia said
Have a nice day and thanks for clarifying my mistakes
i have install NexusHD2-ICS-CM9-HWA_V2.7 and worked perfect and i wanna to get back to win6.5 mobile and get it back my phone is htc hd2 512 ROM ( noooooooooot t-mobile ) i download the official ROM from htc.com install it or there is some things to do ????? plz help me fast :good:
No, you just install it.
option 1 (assuming you downloaded the 3.14 rom)
enter bootloader
flash rom from usb
reboot
enter bootloader
run hspl4
choose 3.03.hspl
reboot
done
option 2
extract ruu_signed.nbh from inside the yourdownloadedrom.exe
rename it to leoimg.nbh
copy it to root of your sd card (sd card 4gb or smaller, 2gb is preffered)
enter bootloader, it should start to flash automatically.
done
---------- Post added at 03:01 PM ---------- Previous post was at 03:00 PM ----------
Spaqin said:
No, you just install it.
Click to expand...
Click to collapse
assuming he doesnt want to remove hspl, that is, if he did 'just install it' and sent it back to htc, they wouldn't honour any warranty since hspl would still be there.
Also, he's just had android installed, so chances are the spl is 2.08.hspl, , , if he installed a 3.14 rom and didnt change teh spl, it wouldn't work, since 3.14 roms dont work on any spl except 3.03.xxxx (for regular hd2, , tmous seems to be able to handle 3.14 roms on non 3.03 spls)
ty aallllllll
HI Guys, I am also looking to install the standard rom back onto my phone as I want to make a claim under my insurance (o2)
The only problem I have is my touch screen has stopped responding (after I spilt petrol on the phone), is it possable to get the phone back to factory rom and radio without the screen working?
Thanks
Gary T
see the link 'Various radios, stock roms and tools HERE' in my sig, the o2 3.14 rom is in there.
either
..
open that exe file with a zip program (change teh extension from .exe to .zip will also work) inside get ruu_signed.nbh, rename it to leoimg.nbh and put on your sd card, reboot into bootloader and it will flash, , thats it.
or
...
into bootloader, connect usb, , when serial changes to usb on teh screen, run that .exe file. when its finished, go back into bootloader, connect usb, and run hspl4, and select 3.03.0000, done.
Hello. I'll use the thread to ask a simple question. I bought HD2 and it currently has Android ICS. I don't want to brick my phone in day 1 so to flash it back to WM6.5 I have to follow this guide, right ? http://www.youtube.com/watch?v=X--T--kvE24
The only thing that worries me is that I have spl-2.08.hspl not the 1.42 stated in the video, is that a problem ? I will use dutty's rom kitchen. Thanks.
EmZvr said:
Hello. I'll use the thread to ask a simple question. I bought HD2 and it currently has Android ICS. I don't want to brick my phone in day 1 so to flash it back to WM6.5 I have to follow this guide, right ? http://www.youtube.com/watch?v=X--T--kvE24
The only thing that worries me is that I have spl-2.08.hspl not the 1.42 stated in the video, is that a problem ? I will use dutty's rom kitchen. Thanks.
Click to expand...
Click to collapse
if you flashed over USB, then hspl isn't replaced, which is why it is still on 2.08,hspl.
Its perfectly fine, assuming you arent wanting to send it for warranty. if you do want to go back to 1.42 then use HSPL2.exe and set 1.42.0000