Related
Dear all,
I am facing a problem here.
Had a hardware problem with the built in microphone and had to revert back to stock rom/splash screen/Original SPL in that order.
Had no problems reverting the ROM and the original screen back (just a couple of flashes), BUT when I tried to revert back the stock SPL here http://forum.xda-developers.com/attachment.php?attachmentid=110582&d=1220406410
I renamed the file to RAPHIMG.nbh, copied it to the root of the SD Card and entered bootloader mode and this is what it displays:
RAPH100
SPL-1.90.0000 (Which means a successful flash)
!!! AND THEN THIS !!!
"Upgrade ROM code error"
"Please try again"
This message is located in the last part of the green stripe in the tri color screen (bootloader)
It is then followed by the grey screen automatically which you are supposed to press volume key to start a flash process BUT it just HANGS at Loading...
unabling you to flash anything.
It's actually a friend's phone too so I guess you understand how hard it is....
Any help is appreciated
Thanks in advance
Possible image might be corrupt on sd card, grey screen is shown when it's trying to read sd, have you tried with sd removed? if you get to 2nd tricolor screen with sd removed i would use usb flash to restore it to working order..
Da_G said:
Possible image might be corrupt on sd card, grey screen is shown when it's trying to read sd, have you tried with sd removed? if you get to 2nd tricolor screen with sd removed i would use usb flash to restore it to working order..
Click to expand...
Click to collapse
Removed the SD and it stays at the tricolor screen with the spl version as mentioned in 1st post.
Also, displaying the Upgrade ROM code error, please try again message
The mode is currently serial
What can I do from here?
fireblade63 said:
Dear all,
I am facing a problem here.
Had a hardware problem with the built in microphone and had to revert back to stock rom/splash screen/Original SPL in that order.
Had no problems reverting the ROM and the original screen back (just a couple of flashes), BUT when I tried to revert back the stock SPL here http://forum.xda-developers.com/attachment.php?attachmentid=110582&d=1220406410
I renamed the file to RAPHIMG.nbh, copied it to the root of the SD Card and entered bootloader mode and this is what it displays:
RAPH100
SPL-1.90.0000 (Which means a successful flash)
!!! AND THEN THIS !!!
"Upgrade ROM code error"
"Please try again"
This message is located in the last part of the green stripe in the tri color screen (bootloader)
It is then followed by the grey screen automatically which you are supposed to press volume key to start a flash process BUT it just HANGS at Loading...
unabling you to flash anything.
It's actually a friend's phone too so I guess you understand how hard it is....
Any help is appreciated
Thanks in advance
Click to expand...
Click to collapse
You cannot flash an SPL from the bootloader. You need to use SSPL. The directions can be found in the HardSPL thread.
NotATreoFan said:
You cannot flash an SPL from the bootloader. You need to use SSPL. The directions can be found in the HardSPL thread.
Click to expand...
Click to collapse
Hey man, thx for stopping by..
If I understand correctly, SSPL runs through the device which is stuck at bootloader currently... or am I hopefully wrong??
If you're at the tricolor screen and it reads serial, that should be fine.. plug in usb and it should switch to usb.. then flash a stock carrier rom through usb.. that should get you up and running and you can then run sspl and flash your spl
Da_G said:
If you're at the tricolor screen and it reads serial, that should be fine.. plug in usb and it should switch to usb.. then flash a stock carrier rom through usb.. that should get you up and running and you can then run sspl and flash your spl
Click to expand...
Click to collapse
Keep in mind im currently on stock SPL, do u think flashing the stock ROM is ok?
That's exactly why i suggested stock ROM, stock SPL will only accept stock ROM's (it will overwrite the spl too so make sure the stock rom you are using is the right one)
dude....i hate to say this...butyou might be s.o.l. at this point. i did the same to my fuze not too long ago... tryingto flash anything to the phone just locks it up.i was lucky enough to bs my way through an att guy to get me a new one (was still under the 30 day warranty).
Da_G said:
That's exactly why i suggested stock ROM, stock SPL will only accept stock ROM's (it will overwrite the spl too so make sure the stock rom you are using is the right one)
Click to expand...
Click to collapse
That's wt Im trying now, tried to flash 2 ROMs already and stops at 2% saying Invalid Vendor ID
I gess I'm using wrong shipped roms till now
fireblade63 said:
That's wt Im trying now, tried to flash 2 ROMs already and stops at 2% saying Invalid Vendor ID
I gess I'm using wrong shipped roms till now
Click to expand...
Click to collapse
I had the same problem as you and could not flash any rom, Always get Invalid vendor ID.
You need the right Stock Rom to flash and in my case in the middleeast, the Stock Rom is so far only available in at HTC.
I had to take the phone to HTC Service Center and they flashed the correct Stock Rom and charged me as they did it out of warranty.
Regards
fireblade63 said:
That's wt Im trying now, tried to flash 2 ROMs already and stops at 2% saying Invalid Vendor ID
I gess I'm using wrong shipped roms till now
Click to expand...
Click to collapse
Sorry about my last post... I misread your issue.
If you flashed the stock 1.90 SPL from the HardSPL thread, then you will need to ask Olipro (or cmonex) which WWE ROM it originated from. That ROM is the ONLY one your phone will accept.
The steps in reverting SPL for warranty / return state to always do the ROM first so that you do not run into this problem. I had the same issue when I was testing a US 3G Diamond I bought from Best Buy (to become acclimated to TF3D prior to the Fuze's release). I restored the SPL first, and then couldn't get Dutty's ROM off the phone, because I could not locate a downloadable version of the WWE ROM that phone came with. [Luckily, Best Buy Mobile's employees in KOP, PA aren't too clever, and I was able to convince them that the phone came that way. ]
NotATreoFan said:
Sorry about my last post... I misread your issue.
If you flashed the stock 1.90 SPL from the HardSPL thread, then you will need to ask Olipro (or cmonex) which WWE ROM it originated from. That ROM is the ONLY one your phone will accept.
The steps in reverting SPL for warranty / return state to always do the ROM first so that you do not run into this problem. I had the same issue when I was testing a US 3G Diamond I bought from Best Buy (to become acclimated to TF3D prior to the Fuze's release). I restored the SPL first, and then couldn't get Dutty's ROM off the phone, because I could not locate a downloadable version of the WWE ROM that phone came with. [Luckily, Best Buy Mobile's employees in KOP, PA aren't too clever, and I was able to convince them that the phone came that way. ]
Click to expand...
Click to collapse
Hmm, then I need to know from which ROM the SPL originated and then flash it.
Thing is, some of the shipped roms available at wiki are just nbh files..
I tried flashing with the wrapper exe and the RaphaelCustomRUU.exe and still all roms I've downloaded don't seem to work.
It's a RAPH100 untied to a network.
fireblade63 said:
Hmm, then I need to know from which ROM the SPL originated and then flash it.
Thing is, some of the shipped roms available at wiki are just nbh files..
I tried flashing with the wrapper exe and the RaphaelCustomRUU.exe and still all roms I've downloaded don't seem to work.
It's a RAPH100 untied to a network.
Click to expand...
Click to collapse
Post in the HardSPL thread asking which ROM the SPL originated from. Once you know that, you can download the appropriate ROM from the Wiki.
NotATreoFan said:
Sorry about my last post... I misread your issue.
If you flashed the stock 1.90 SPL from the HardSPL thread, then you will need to ask Olipro (or cmonex) which WWE ROM it originated from. That ROM is the ONLY one your phone will accept.
The steps in reverting SPL for warranty / return state to always do the ROM first so that you do not run into this problem. I had the same issue when I was testing a US 3G Diamond I bought from Best Buy (to become acclimated to TF3D prior to the Fuze's release). I restored the SPL first, and then couldn't get Dutty's ROM off the phone, because I could not locate a downloadable version of the WWE ROM that phone came with. [Luckily, Best Buy Mobile's employees in KOP, PA aren't too clever, and I was able to convince them that the phone came that way. ]
Click to expand...
Click to collapse
SPL has nothing to do with the Invalid Vendor ID Error, It is the CID. In another word you can flash SPL 1.95 and still can not flash the AT Rom 1.95.502.5 because the CID is different.
Regards
ViperBJK's QMAT features GoldCard generator for current HTC devices that can force RUU to bypass CID check.
Do you know what is the CID of your device?
shafez said:
SPL has nothing to do with the Invalid Vendor ID Error, It is the CID. In another word you can flash SPL 1.95 and still can not flash the AT Rom 1.95.502.5 because the CID is different.
Regards
Click to expand...
Click to collapse
The CID is determind by the SPL.
Look up the error code posted... everything points to HardSPL. Back in my Wizard days, HardSPL did not exist, and we just did a CID unlocking. This is not the case with newer devices.
All ROMs are not created equal. Each WWE ROM checks for specific information within the SPL, and if it doesn't find what it's expecting, fail...
stepw said:
ViperBJK's QMAT features GoldCard generator for current HTC devices that can force RUU to bypass CID check.
Do you know what is the CID of your device?
Click to expand...
Click to collapse
I'm not sure
Where can I know that?
@NotATreoFan && Shafez,
I remember from TyTNII day when Shafez suggested extracting 3.29 and 28 SPLs from the newer shipped 6.1's for a better responsive device.
We could extract and build with htc rom tool if I remember the name of the tool correctly.
Do we have a tool as such compatible with TP? (agreeing with NotATreoFan here)
@Shafez,
Since you think it is not SPL and it is a CID issue, what can I do about it?
Sending it to SVC for repair out of warranty is an option but I'd like to leave it as my last.
Did they provide the ROM or they flashed it for you?
Were u able to make raw files out of it for future use or any1 else has it?
Thx guys and keep the help coming
fireblade63 said:
@NotATreoFan && Shafez,
I remember from TyTNII day when Shafez suggested extracting 3.29 and 28 SPLs from the newer shipped 6.1's for a better responsive device.
We could extract and build with htc rom tool if I remember the name of the tool correctly.
Do we have a tool as such compatible with TP? (agreeing with NotATreoFan here)
@Shafez,
Since you think it is not SPL and it is a CID issue, what can I do about it?
Sending it to SVC for repair out of warranty is an option but I'd like to leave it as my last.
Did they provide the ROM or they flashed it for you?
Were u able to make raw files out of it for future use or any1 else has it?
Thx guys and keep the help coming
Click to expand...
Click to collapse
Since you cannot get past the bootloader, your only option is to find the WWE ROM that matches the SPL you flashed. Even though the HTC ROM Tool "signs" the NBH file, it still won't fool the stock bootloader... if it did, we wouldn't need HardSPL.
Like the title says, im just stuck at bootloader and instead of booting to the white screen it just stays on bootloader and says "SERIAL".
Ive googled, youtubed, and searched here, and many have the same problem, but i have yet to seen a solution to this.
I have tried android and many custom roms, and now im back on original ROM and everything works great. BUT i have HSPL in my phone and i dont want it for now.
It is a very easy procedure in the guides and should not be a problem, but please how can i get my LEOIMG.nbh to boot from my memorycard?
It is formated FAT32, and i have tried redownload the stock rom and unpacked it with winrar several times, but the result is always the same.
Is there some way to go around this? I Just wanna boot from the memorycard and restore my phone.
FYI, the restore is just for warranty issues.. I just want to be able to go back just to be on the safe side..
Then after that i can try the cooked roms all days
Thanks!
What size is the microSD card? As there has been reports of problems flashing from 16GB cards.
While in bootloader mode, you can plug in the microUSB and the 'Serial' should be replaced by 'USB'. This means that you can run the flashing from the computer (just ignore the requirement for ActiveSync).
Thanks for the quick reply!
I have a 8 GB memorycard.
Just before i read your post i inserted the usbcable and the screen on my htc says "USB".
But how do i uninstall HSPL from my PC in usbmode? Use customRUU and place LEOIMG.nbh in that folder?
If you install either the HTC Stock or your mobile provider's ROM (what ever you need for warranty requirements), they will flash your phone with SPL, ROM and RADIO.
These ROMs are avaiable from your mobile provider's website or via a link in the ROM Section.
Sounds great!
So i just run the original .exe file from my PC when my HTC HD2 is in bootloader screen in USB-mode, correct?
I have alreade flashed with original rom from PC when my phone was online. But then the HSPL did not go away even though my original rom was installed.
I could use alittle help too
when i try to update it stops at 4% tried to flash other energy roms with the same issue. don't know what todo to get past 4%
fred_up said:
If you install either the HTC Stock or your mobile provider's ROM (what ever you need for warranty requirements), they will flash your phone with SPL, ROM and RADIO.
These ROMs are avaiable from your mobile provider's website or via a link in the ROM Section.
Click to expand...
Click to collapse
won't flash the spl over usb whilst hspl is installed.
H4z3 said:
Sounds great!
So i just run the original .exe file from my PC when my HTC HD2 is in bootloader screen in USB-mode, correct?
I have alreade flashed with original rom from PC when my phone was online. But then the HSPL did not go away even though my original rom was installed.
Click to expand...
Click to collapse
use the hspl.exe program to remove hspl just like you used it to apply it. just choose a stock spl instead of the hspl.
example, regular hd2, wants to go back to o2 stock everything.
run hspl2, choose 1.66.0000
run the o2 1.72.exe rom over usb.
all done.
if the rom doesn't flash its not the correct stock rom.
samsamuel said:
use the hspl.exe program to remove hspl just like you used it to apply it. just choose a stock spl instead of the hspl.
example, regular hd2, wants to go back to o2 stock everything.
run hspl2, choose 1.66.0000
run the o2 1.72.exe rom over usb.
all done.
if the rom doesn't flash its not the correct stock rom.
Click to expand...
Click to collapse
At first i used HSPL 3 to install 2.08.0000 HSPL.
But if i run that file again i only have the choice 2.08.0000.
I downloaded a previous version of HSPL, and there i could choose SPL 1.42.0000 wich was my original SPL version before the flash.
Is this a correct way to do this?
I am asking again because even though i now am at the original ROM and Original SPL version the Radio and Protokoll-version differs from the versions when i bought the telephone.
radio and protocol doesn't matter. yes you've done it right. so long as its a stock rom and the spl ends 0000 then it's fine.
Ok thanks!
Then everything is ok now and i am very happy for that, so thanks for all answers!
I can also add that i took my original SD-card (2GB) and put the LEOIMG.nbh on it.
The bootsequence then started ok when holding down volumebutton and power on.
But the result was exactly the same as it was when flashing to stock SPL with HSPL2 utility.
So the booting-problem was memorycard related.. So it seems that even some 8 gb memorymodules have problems.
Just thought you should know.
hi all
Is there a way to break hspl 3.03.0000 there?
Break HSPL? Be more specific.
bricked my leo2??
hello, happy new year for every one
i have the 3 color screens after flashing my leo with the last official rom by sd card.... the spl is 3.03... so i can't flash with 2.08 hspl .... and i have the message rom update error....
i would like to know if i can repair my leo with a hspl 3.03... and if exist....
thanks
ligan35 said:
hello, happy new year for every one
i have the 3 color screens after flashing my leo with the last official rom by sd card.... the spl is 3.03... so i can't flash with 2.08 hspl .... and i have the message rom update error....
i would like to know if i can repair my leo with a hspl 3.03... and if exist....
thanks
Click to expand...
Click to collapse
Install the old 1.72 etc ROM through SD card and it will replace the SPL then you can put HSPL 2.08 for your desired Custom ROM. I hope this helps.?
Yup its simple go to shippedroms.com ... get ur stock rom... flash it... and ya then flash the hspl and radio
Sent from my HTC HD2 using XDA App
Hmmmm, I have the 3.14 ROM with 3.03.000 SPL installed.
What I`m trying to do is Install NAND Android. But to do this I need HSPL 2.08.
Tried downloading one of the older stock roms and then attemped to flash via SD and through the .exe file directly.
From the .exe file it boots to the tri color screen and then reaches the progress bar screen. However it sticks there and the errors out with a code : 262.
Through the SD method after the phone detects the .nbh file it comes back with a "28002 : Not allow" error message.
Have tried this with varoius types of Mem cards but no luck.
Is it actually possible to downgrade a 3.03 SSPL?? I read in some forums here that it isnt.
Question : Since this isnt working, will a task 29 help in this case? From what I understand it formats the filesystem that holds the OS. By doing so, will I then be able to flash one of the older Roms so I can install HSPL 2.08?
xcsi said:
Hmmmm, I have the 3.14 ROM with 3.03.000 SPL installed.
What I`m trying to do is Install NAND Android. But to do this I need HSPL 2.08.
Tried downloading one of the older stock roms and then attemped to flash via SD and through the .exe file directly.
From the .exe file it boots to the tri color screen and then reaches the progress bar screen. However it sticks there and the errors out with a code : 262.
Through the SD method after the phone detects the .nbh file it comes back with a "28002 : Not allow" error message.
Have tried this with varoius types of Mem cards but no luck.
Is it actually possible to downgrade a 3.03 SSPL?? I read in some forums here that it isnt.
Question : Since this isnt working, will a task 29 help in this case? From what I understand it formats the filesystem that holds the OS. By doing so, will I then be able to flash one of the older Roms so I can install HSPL 2.08?
Click to expand...
Click to collapse
Task 29 will not work with SPL 3.03.
You need to go to HTC's website and use your phone's serial number to download an older version of the ROM - you will only be allowed to download ROMs which are allowed for your phone. You cannot download a HTC stock ROM if your phone is restricted to a branded (phone operator's) ROM. You should be able to get a 1.66 or 1.72 or 2.08 or 2.10 ROM (dependant upon branding and country).
Put the phone into BootLoader mode, then connect to your computer and run the downloaded file.
it works!!!
download old original rom like 1.48.479.1_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
flash it via activesync/ win mobile center(win7)
it will downgrade 3.03.0000 to spl 1.42.0000
Thanks a lot for info!
Hey any clue how downgrading from a indian rom would be possible?
sudeep6258 said:
Hey any clue how downgrading from a indian rom would be possible?
Click to expand...
Click to collapse
Install the 1.47 stock rom
Thank you all
My problem was solved with downgrade
cotulla's but please fix the problem with hacking.
dacochir said:
Thank you all
My problem was solved with downgrade
cotulla's but please fix the problem with hacking.
Click to expand...
Click to collapse
lol, nice timing, its already solved. HSPL4 was released a few days ago, see link in my sig. Works with spl 3.03.0000
samsamuel said:
lol, nice timing, its already solved. HSPL4 was released a few days ago, see link in my sig. Works with spl 3.03.0000
Click to expand...
Click to collapse
Thanks for this message!
I just received my device back from repair, worried about the 3.03.0000
Awesome i don't have to worry about that anymore
How can I get more device space on a cooked rom. Regular stock rom has over 600 mb of device space and cooked roms only have about 40 mb of rom. How can I create more space. I keep getting phone running low on stoaage message on every cooked rom I put on my phone.
Thnaks for your help.
that is kinda strange, as i have the opposite.
task 29 before installing new rom?
what roms have you tried? energy always seems good.
Sounds as though you have HSPL and a 3.14 based ROM.
I have tried using Enegry Dinik of Glass rom and it give me that message also. How do I perform task 29.
Hey I have HSPL and yes it's a 3.14 Rom. what should I do to get more space.
Thanks
kasualnupe2 said:
Hey I have HSPL and yes it's a 3.14 Rom. what should I do to get more space.
Thanks
Click to expand...
Click to collapse
Get start to remove HSPL: Use HSPL_RUU.exe and select a spl value.
And reinstall Stock ROM 3.14
Stock ROM 3.14 isn't compatible with HSPL!
should I try to put an older rom instead of 3.14. Is there a video on how to put new rom on sd card or how to remove hspl.
kasualnupe2 said:
should I try to put an older rom instead of 3.14. Is there a video on how to put new rom on sd card or how to remove hspl.
Click to expand...
Click to collapse
There are two ways to do it:
A)Over ActiveSync
1) Download HSPL2_RUN.exe
2 Connect your device to your PC
3) Run HSPL2_RUN.exe and set your SPL value to SPL 1.66.
2. Soft reset your device after you have done that.
3) Download with your S/N from the HTC webpage your ROM version 3.14
4) After downloading this to your PC, connect device to PC and be awair that it is well connect over ActiveSync or WMC
5) Run the RUU_Leo_xxx_x.XX.xxx.x_Radio_xx.xx.xx.xU_x.xx.xx.x_LEO_Ship file from your PC as administrator.
6) Follow the steps on your screen
Click to expand...
Click to collapse
Or
B)Over SD card
1) Download the correct Stock ROM from the HTC Webpage by using your S/N. (you will get a RUU_Leo_xxx_x.XX.xxx.x_Radio_xx.xx.xx.xU_x.xx.xx.x_LEO_Ship file.)
2) Right click on the RUU_Leo_xxx_x.XX.xxx.x_Radio_xx.xx.xx.xU_x.xx.xx.x_LEO_Ship file and select extract with 7Zip/WinZip
3) Prepared your SD-card (use a 2 or 4GB SD no bigger) and format it by FAT32
4)Take the "RUU_signed.nbh" from it and copy it to SD card.
5) Rename the "RUU_signed.nbh" to "leoimg.nbh"
6) Reset the device while pressing the volume down button
7) Follow the instructions mention on your device screen
Click to expand...
Click to collapse
Thanks alot for the videos. So, when I want to put another custom rom. Should I use 3.14 Rom or something older, so I don't have this problem anymore. Or could I hardspl and boot android with tm us stock rom. I really like android and trying to get up to putting nand android on my phone.
Thanks for all you guys help.
I can't get hardspl to run it keeps giving me an error. So, I can unistall hspl 2.08hspl. I can't do the SD card because my sd card is 16gb. So, do you know what I can do.
Thanks
kasualnupe2 said:
I can't get hardspl to run it keeps giving me an error. So, I can unistall hspl 2.08hspl. I can't do the SD card because my sd card is 16gb. So, do you know what I can do.
Thanks
Click to expand...
Click to collapse
are you running it as an administrator (right click, run as administrator). if you got hspl on your phone via activesync, you should be able to get it off.
You cannot run HSPL on a 3.14 ROM as the SPL is 3.03.
First find an older version of your ROM - go to the HTC website and download a 2.10 ROM using your phone's serial number (this should guarantee that you are using a correct ROM for your phone). Flash the phone with that ROM. Now the SPL will no longer be 3.03.
Run HSPL3 and select 2.08.HSPL.
Make sure that the RADIO is 2.08.50.xx or higher with a .50 (it should be mentioned in the ROM download name as like 2.08.50.14)
Now go to the NAND Andriod section, pick a ROM and carefully read the instructions.
Does anyone know why I am recieving a Write Flash Error
kasualnupe2 said:
Does anyone know why I am recieving a Write Flash Error
Click to expand...
Click to collapse
Maybe you used a wrong stock ROM??
I can't find them on HTC website. I tried looking from hd2 phone cateogory but I can't find any.
kasualnupe2 said:
I can't find them on HTC website. I tried looking from hd2 phone cateogory but I can't find any.
Click to expand...
Click to collapse
Can you communicate your S/N, I will look for you.
S/n - sh05cpr04279
thanks
kasualnupe2 said:
S/n - sh05cpr04279
thanks
Click to expand...
Click to collapse
Based on your S/N you have a branded device ore a device aria who isn't updated yet.
Pleas use GoldCard Technique for installing a stock ROM 3.14 read more about it
thanks I will try it
kasualnupe2 said:
thanks I will try it
Click to expand...
Click to collapse
You're welcome sir.
I own a new HD2....and now i think i bricked it.
I installed HSPL3 on my device and then MAGLDR113 but after reboot nothing happened just white screen and green htc logo
I tried to uninstall HSPL according to manual stated in you tube but loading got lost just after a blink.
My phone is showing this info in bootloader....
PB81100 SS-BC
SPL-2.08.HSPL 8G XE
0x05
CotullsHSPL 0x50
PLeaseeeeeeee help me out.....i beg all
look at my post sounds like mine
check out post 9 in this thread sounds like mine http://forum.xda-developers.com/showthread.php?t=961001
not sure if you are tmous tho you may want to start with your shipped or test masd 2.02 rom
As far I can remember, all tutorials said that hspl can be just "uninstalled".
The only way to get rid of hspl (and maglr at once) is to flash original rom
BUT FROM SD CARD.
Tutorial how to do that is in the "sticky" (third sticky in this subforum) section.
or better still, finish the process you started. . . apply a rom.
you cant just "apply hspl, apply magldr" and then stop, you gotta enter magldr and flash a wp7/android rom.
also, if you still have the original radio that shipped with your phone, it wont be high enough version to work.
enter bootloader and flash something like radio 2.11.50.x or higher.
This is not an error or fault at all, just plain user failure.
Did you try to flash stock rom? If activesync is not allowing it, then you can try it booting your phone in boot loader mode. But make sure you flash stock rom only.
Alternately you can flash via sd as mentioned by "rtomakov"
Thanks
jeetu1981 said:
Did you try to flash stock rom? If activesync is not allowing it, then you can try it booting your phone in boot loader mode. But make sure you flash stock rom only.
Alternately you can flash via sd as mentioned by "rtomakov"
Thanks
Click to expand...
Click to collapse
Flashing stock rom via usb wont remove hspl!
so dear, you need to know this first...magldr will install in rom replacing your wm6.5......so after you do that you need a nand android build or wp7 to use with magldr or if you want wm 6.5, no need to remove hspl, just reflash the stock 1.48 wwe rom for india...search for that in the forum...this will replace the magldr..........just be sure not to flash the new stock 3.14 wwe rom over hspl..it will produce incompatibilities like small memory....if you want 3.14 rom, first flash stock 1.48 wwe, and then using hspl, uninstall hspl (select 1.42spl )...then install 3.14 wwe rom (be sure to flash india specific roms)
rtomakov said:
Flashing stock rom via usb wont remove hspl!
Click to expand...
Click to collapse
Right, but it will atleast flash a stock ROM, HSPL can be removed later
Thank u ol for helping me out.
Pblm solved I installed new 3.14 rom as it olso upgraded my radio and magldr run after boot successfully.
Now I m using windows7
parkarintl said:
Thank u ol for helping me out.
Pblm solved I installed new 3.14 rom as it olso upgraded my radio and magldr run after boot successfully.
Now I m using windows7
Click to expand...
Click to collapse
That's good to hear. WP7? I flashed it yesterday and then switched back to WM in just 15 minutes, not my cup of tea.
Thanks