Hello,i need help.
Today i decided to install FolioMod 1.4 on my Folio.
but i did these steps:
1. At Toshiba power-on screen, Press Power, then press VOL+
Now press VOL+ button to enter factoryreset/firmware update
Press VOL- to enter firmware update
Press VOL+ to confirm you want to do it.
Insert SDcard into folio 100
Press the HOME key , when you see the "!" screen
Choose "install SDCARD:update.zip", and await status onscreen.
But instead "install" have i "apply"
and when i select "apply SDCARD:update.zip"
that wrtites
...
...
7. installing MISC:...
and then nothing...
when i repeated and use an other instructions,ocours the same mistake
knows anybody what's wrong? thanks
Hello,
What version of stock rom do you have?
Did you try go to a recovery menu with already inserted sd card?
Regards,
headblow
i've ...2.2.5.0131 ,i've updated before i read some post about that update :-(.
And yes.i've tried every instructions what i found and too tried it with inserted with SD card.
Now i read some article,then i must re-write recovery image,is it right?
And if is,how can i do it?
Now you have the answer, you can't install foliomod this way on 2.2.5.0131.
In order to get foliomod on this version, you need to do following things,
Look here:
http://forum.xda-developers.com/showthread.php?t=961826
You may also use this links:
http://www.addictivetips.com/mobile/how-to-root-toshiba-folio-100-android-tablet/ (It may helps you root folio)
http://www.addictivetips.com/mobile/what-is-adb-and-how-to-install-it-android/ (It may helps you to install ADB)
http://www.addictivetips.com/mobile/enable-adb-usb-drivers-for-nvidia-tegra-based-android-tablets/ (It may helps you to configure ADB to work with folio)
It's very simple but it will take some time to do all necessary things.
Regards,
headblow
hey,thats what i was looking for!
Thanks a lot!
today i will try this! thanks
Niiice!
i've got it...
it was long but now i did it!
thanks a lot
Related
if someone has to make a list of what to do?
riccabeca said:
if someone has to make a list of what to do?[/QUOT]
1- you need a file called smart.upr at the root of your tf card
2- turn your phone completly off
3- hold the green and red button and press power
4- the phone should go into tf update mode and you should see a green progress bar.
5- when completed (depending on wich rom version you installed) press action button, power button or reset button to restart your phone.
*Make sure you have the right smart.upr file...the t4242+ one.
Hope this helps
Joe
Click to expand...
Click to collapse
i did what they asked, but the mobile enters the module update, only bar appears update more it does not advance. what do I do? what is the problem?
Need to format the root of htc?
One week ago i bought my first smartphone, Samsung I9001, i had no ideea what to do with it, so when i connected it to my laptop via Kies it asked me if i want to upgrade my firmware. I did it and at 3% stoped working. So i searched the web for solutions, i found that Odin program, and i installed android 2.3.6. I was really happy that i solved the problem, but then i found out that my warranty could be lost because i rooted my phone, and it apears also in Menu-About Phone-Kernel Version. So now i dont know how to unroot it, and install an official firmware, and what version of the firmware do i need, to have my warranty back. Please i need some help!
From this thread http://forum.xda-developers.com/showthread.php?t=1253707
To UNROOT
Put UnRoot-i9001-Signed.zip into internal sdcard
Reboot into Recovery mode
Use Volume buttons to choose apply update from sdcard in Recovery Menu.
Press Home button to submit.
Use Volume buttons to choose UnRoot-i9001-Signed.zip on sdcard
Press Home button to start update.
1 second and Root is gone.
Choose reboot system now and press Home button to reboot your phone.
And about your rom, do you have a cooked rom or a stock one?
salemsnake said:
From this thread http://forum.xda-developers.com/showthread.php?t=1253707
To UNROOT
Put UnRoot-i9001-Signed.zip into internal sdcard
Reboot into Recovery mode
Use Volume buttons to choose apply update from sdcard in Recovery Menu.
Press Home button to submit.
Use Volume buttons to choose UnRoot-i9001-Signed.zip on sdcard
Press Home button to start update.
1 second and Root is gone.
Choose reboot system now and press Home button to reboot your phone.
And about your rom, do you have a cooked rom or a stock one?
Click to expand...
Click to collapse
Thank you a lot! I will try that as soon as possible.
And about my rom, i don't know if it's cooked or stock, but i have the filename, is GT-I9001_VDH_I9001XXKPS_I9001OXXKP5_I9001XXKPG .
And i was hoping if you can tell me what rom to install, so i can be able to use my warranty. Or if i will do what you wrote, i won't need to install another rom? Thanks!
i successfully entered in recovery mode, unrooted my phone, but in menu/about phone the kernel version still says [email protected] so i am worried if i take it to service, the wont fix my phone, because my warranty will not be available. so can someone tell me if this is true. my phone doesn't vibrate anymore since i rooted it.
please someone help me
Thanks, just what I needed.
helped me 2, i needed to send it to warranty, just couldn't send it rooted.
First off, sorry if this is in the wrong section, didnt quite feel like it belonged in the development forum.
Now to the problem. I downloaded a root thing for gsm. Read the instructions and went oops thats for gsm. I cant post links because I am a new member but if you search for thread "ICS 4.0.4 upgrade guide - "not so permanent now"" on here you will find the page/instructions/link. Went on searching. However having way too many windows open on my little laptop screen with a touch pad thats too sensitive i accidentally somehow clicked on something in that folder because I am an idiot and left the window open. Lesson learned...close/delete **** that doesnt apply to my phone. I think i clicked either Rootexplorer.apk or whatever was on top or below (fastboot or step 1 - flash 403) it since that is where my mouse was approx when something popped up and my phone did something (lesson 2, dont leave phone plugged in to computer)
I have been searching furiously and have all but given up and am ready to go out and buy a new phone tomorrow...ouch...
I am hoping that somebody here might know of something. My phone was freshly updated to 4.04 before it happened. Please try to keep the flaming to a minimum but understandably i deserve some of it but im feeling pretty miserable as it is already. Thanks in advance for any help you guys may provide.
I'm no expert, but I would think of you can still get into fastboot you can saved your phone. I'm droidrzr.com there's plenty of people that use fastboot to go from one ics leak to another. Maybe you can do something like that. I don't know razrs all that well. Sorry if this was a useless post.....
Sent from my DROID RAZR
Google "matts razr utility 1.7"
Download and run.
Make sure your phone is connected to your PC and in ap fastboot mode,
Select option 1
Follow directions from there.
also, make sure you have .211.xt912.en.us on the root of your EXTERNAL SD card before you start the utility.
This should at least get you on the stock cdma ics.
EDIT:
Download
Verizon, 6.16.211.en.US
Unzip the file, copy the 2 files to Root of your EXTERNAL SDCARD
Follow this: droidforums.net/forum/droid-razr/213197-offical-ota-zip-installation-guide-droid-razr-razr-maxx.html
Copied from there:
1. Download the official OTA "Blur_Version.6.12.181.XT912.Verizon.en.US.zip " file from above.
2. Place the file downloaded in step one into the ROOT of your EXTERNAL SD card. (DO NOT UNZIP THE FILE)
3. Turn off phone.
4. Go into recovery by pressing and holding the Volume Up (+), Volume Down (-), and Power button all three at the same time. (Press and hold all physical buttons.)
5. The menu will come up and select "Recovery".(Volume Down key to go down and Volume Up key to SELECT/ENTER Recovery.)
*The Android and Exclamation mark logos will come up*
6. Press both Volume Up (+) and the Volume Down (-) buttons at the same time. Release.
7. With the Volume Down (-) button go down to "Wipe CACHE partition" and press the Power button to select it. DO THIS TWICE (Don't worry your data will not get erased by wiping the cache.) (Thanks smmfc)
8. With the Volume Down (-) button go down to "Apply Update from SDCard" and press the Power button to select it.
9. Volume Down (-) go to the “Blur_Version.6.12.173.XT912.Verizon.en.US.zi p” and select it with the Power button. (This is the one we put in the External SD in Step 2.)
10. It will take a while to upgrade, mine isn't even done yet and I started it when I started to write Step 1
11. Once it is done, go to "Reboot system now."
12. Official ICS, Enjoy!!! =D
Once it's your first time starting ICS, it WILL take a while to load up, it is normal, it will also be "Optimizing applications" at first start up.
-----------------------------------------
Just extract the blur version zip and place it on the root of external SD, then run utility
All of this can be done from your PC if you have a card reader.
Don't thank me, thank matt for his awesome utility if it works.
Sent from my DROID RAZR using xda premium
Well I couldnt live without a phone, normally I would painful as it would be. But got a new job offer and I need to be in contact with the world so I went and got a new one this morning. But hopefully if anybody else is as silly as me then this thread will be here for them to save their phones.
Has anybody found a link to any custom or stock firmware for this tablet?
I have a small annoying issue that I am sure could be fixed with a flash, the back button randomly stops working until I reboot.
The baby Einstein on their 800 number thought a factory reset would fix it, then that using the software button was a good enough solution and had no clue about tablets in general. Through Support e-mail they were heading towards wanting me to ship the tablet back rather than supply a link to firmware. I explained to them it doesn't appear to be hardware related as it is random, and reboot fixes it.
im looking for the same firmware man, i have mine bricked :S
How to Flash Zeki TB782B, TB1082B Rom with Livesuit (UnBrick)
gmrastaman said:
im looking for the same firmware man, i have mine bricked :S
Click to expand...
Click to collapse
There is already a different thread on here with the information, but here is how I have personally done it......
Zeki TB782B/TB1082B is using the Allwinner Chip A10.
I search in the web and found the Rom flash steps
Flash Tool LivesuitPack
http://hotfile.com/dl/136803097/cffe...ivers.rar.html
The flash ROM Demo video
http://www.youtube.com/watch?v=238RR-WvhrQ
You can get the Rom at below link
http://depositfiles.com/files/u7ew46yzm
FID HN TB1082B ROM
http://depositfiles.com/files/ay9hhvpyf
FID CF TB782B ROM
http://depositfiles.com/files/0wopipacg
FID BN TB1082B ROM
http://depositfiles.com/files/4uoxkwjc4
FIB BN TB782B ROM
1.Required files: Upgrade tool (Livesuit.exe)
2. Make sure your tablet is fully charged
3. Backup your data, device will be formatted during upgrade
4. The driver and upgrade software work for both Windows XP and Windows 7.
Upgrade Steps:
1. Unzip the upgrade tool and USB drive to your hard drive (recommend to put it in C:\ ).
Double-click the LiveSuitPack_v1.07.exe file, it will automatically install the driver files. Click “OK” to complete the driver installation.
2. Open Livesuit.exe
Double-click to open the upgrade tool LiveSuit.exe
3. Select the firmware
Click “No” to not choose the user upgrade wizard, and click the “Select Firmware” button (the first button from the left) to select the firmware .img file.
4. Turn off your tablet
Make sure the tablet is powered off (Turn it on, press the power button for more than 8 seconds to force power off)
5. Press the key combination to start it in the upgrade mode
a. Press and hold down the “Vol +”, button on TB782B,TB892B or “Home” button on TB1082B
b. Connect the USB cable to tablet and computer
c. After connecting the USB cable, press the power button 6 times quickly (you should get a popup window if done correctly, if not repeat step 5 from beginning)
d. DON’T release the “Vol+” button till the LiveSuit window pops up
e. You can now release the “Vol+” button
(Note: If you install the driver at this time the pop-up dialog box, the path to point to installation directory UsbDriver Livesuit folder, click Next to complete the driver installation prompts).
You should see Livesuit window pops up; otherwise, you didn’t do it correctly, you have to repeat step 4 and 5.
6. Select the format to force upgrade
Livesuit prompt “force format”, click “Yes” (Y). All of the original apps installed will be removed.
We highly recommend mandatory format! ! ! Otherwise the update is not complete and may brick! ! !
7. Upgrade begins
Pop-up “OK to force format” dialog box, select “Yes”, the upgrade begins:
8. The upgrade is complete
Firmware download process lasted about three and a half minutes or so, please wait until the prompt “upgrade successful.”
9. Automatic restart
After the upgrade is complete, your tablet will automatically restart, then you can unplug the USB cable.
Slow start-up time machine for the first time, please be patient.
If the machine does not restart automatically, press and hold the Power button for 8-10 seconds or more to ensure the power switch off, then press the Power button 3 seconds or more to turn on your tablet.
10. Congratulations! You have flashed the firmware.
you can get the Google Play at below link
http://forum.xda-developers.com/show....php?t=1621831
ROM for Zeki TB753b
Do you happen to have the Rom for the TB753b (JB 4.1.1)? I have soft bricked my mom's tablet, and need the rom so I can flash it, and hopefully get her tablet back in working order.
Zeki TBD753B stock rom
I am generally good at finding stuff, but I too can not find the stock rom for the tbd753b 7" zeki tab. Any help would be much appreciated. Thank You
need build.prop
i need the original build.prop to flash to my messed up TB753B. does anyone got it??!!??
dragonfriend0013 said:
i need the original build.prop to flash to my messed up TB753B. does anyone got it??!!??
Click to expand...
Click to collapse
Do you still need the build.prop.original?
Sent from my TBD753B using Tapatalk 4
Got it working
vindicato said:
Do you still need the build.prop.original?
Sent from my TBD753B using Tapatalk 4
Click to expand...
Click to collapse
I was finally able to get access to it through ADB and reset the permissions on the file. all is good now. I do still have problems with the screen "double tapping" though and have not figured out how to fix it. Does yours do the same thing.
The only problem I seem to have is that top left hand corner. Sometimes you have to tap that location a couple of times if that's what you mean
Sent from my TBD753B using Tapatalk 4
---------- Post added at 06:42 PM ---------- Previous post was at 06:37 PM ----------
That and updating my Super su binary...
Sent from my TBD753B using Tapatalk 4
please give the firmware for tb753b
please give the firmware for tb753b. for Livesuit.exe
ROM for TAB ZEKI tbdc1093b
any have de rom for this tab? ZEKI tbdc1093b
fallen links , FID: BN TB782B
Can someone help me? I need this rom , my tablet is brick
Zeki TB782B/TB1082B is using the Allwinner Chip A10.
I search in the web and found the Rom flash steps
Flash Tool LivesuitPack
http://hotfile.com/dl/136803097/cffe...ivers.rar.html
The flash ROM Demo video
http://www.youtube.com/watch?v=238RR-WvhrQ
You can get the Rom at below link
http://depositfiles.com/files/u7ew46yzm
FID HN TB1082B ROM
http://depositfiles.com/files/ay9hhvpyf
FID CF TB782B ROM
http://depositfiles.com/files/0wopipacg
FID BN TB1082B ROM
http://depositfiles.com/files/4uoxkwjc4
FIB BN TB782B ROM
1.Required files: Upgrade tool (Livesuit.exe)
2. Make sure your tablet is fully charged
3. Backup your data, device will be formatted during upgrade
4. The driver and upgrade software work for both Windows XP and Windows 7.
Upgrade Steps:
1. Unzip the upgrade tool and USB drive to your hard drive (recommend to put it in C:\ ).
Double-click the LiveSuitPack_v1.07.exe file, it will automatically install the driver files. Click “OK” to complete the driver installation.
2. Open Livesuit.exe
Double-click to open the upgrade tool LiveSuit.exe
3. Select the firmware
Click “No” to not choose the user upgrade wizard, and click the “Select Firmware” button (the first button from the left) to select the firmware .img file.
4. Turn off your tablet
Make sure the tablet is powered off (Turn it on, press the power button for more than 8 seconds to force power off)
5. Press the key combination to start it in the upgrade mode
a. Press and hold down the “Vol +”, button on TB782B,TB892B or “Home” button on TB1082B
b. Connect the USB cable to tablet and computer
c. After connecting the USB cable, press the power button 6 times quickly (you should get a popup window if done correctly, if not repeat step 5 from beginning)
d. DON’T release the “Vol+” button till the LiveSuit window pops up
e. You can now release the “Vol+” button
(Note: If you install the driver at this time the pop-up dialog box, the path to point to installation directory UsbDriver Livesuit folder, click Next to complete the driver installation prompts).
You should see Livesuit window pops up; otherwise, you didn’t do it correctly, you have to repeat step 4 and 5.
6. Select the format to force upgrade
Livesuit prompt “force format”, click “Yes” (Y). All of the original apps installed will be removed.
We highly recommend mandatory format! ! ! Otherwise the update is not complete and may brick! ! !
7. Upgrade begins
Pop-up “OK to force format” dialog box, select “Yes”, the upgrade begins:
8. The upgrade is complete
Firmware download process lasted about three and a half minutes or so, please wait until the prompt “upgrade successful.”
9. Automatic restart
After the upgrade is complete, your tablet will automatically restart, then you can unplug the USB cable.
Slow start-up time machine for the first time, please be patient.
If the machine does not restart automatically, press and hold the Power button for 8-10 seconds or more to ensure the power switch off, then press the Power button 3 seconds or more to turn on your tablet.
10. Congratulations! You have flashed the firmware.
you can get the Google Play at below link
http://forum.xda-developers.com/show....php?t=1621831[/QUOTE]
Hi first of all just want to thanks for this forum though I know it's wrong forum I think but I can't post under Android Development. Anyway thanks again for this forum again, I was able to root my Xperia P because of this site. Just want to clarify and ask some things about this one:
-In my first attempt rooting my phone, I experienced that my phone display is not normal like it's blurry. Anyone experienced that? Then I re-root my phone again but this time I chose Superuser, in my first attempt I chose SuperSU. After that, everything went fine, display is now okay then I download and installed SuperSU (granting permission with Superuser). Having those two at the same time is okay? Though I really don't know what are these two are for.
-Then after that, I proceed in CWM Recovery. At first I'm having trouble with accessing the recovery then finally I was able to access it. Then as per guide, I chose "Backup" then I just wait after that the Backup Completed then I'm just curious what is "Choose Backup Format" so I click it then it freeze. Anyone experienced freezing in CWM Recovery? And what is "Choose Backup Format"? And fortunately, I was able to reset my phone by pressing "Volume Up + Power Button". I saw it here too in this forum, to quote:
dushyanth o korner said:
Hi, If your phone is hard bricked you can update the firmware through the flash tool.first you download the latest the firmware and put your phone into fastboot mode( press up+power) and connect the usb to the phone from your pc.and you can see the blue colour led blinks. then press the flash iconin the flash tool and select fastboot mode and flash the firmware.
Click to expand...
Click to collapse
Just want to ask as well is there any list out here about some combination button? Like this one, "Volume Up + Power" is a fastboot mode.
Thanks!