hello everybody,
i'm using foliomod 1.4, but i encountered some wifi problems. so yesterday i tried the V1.3+ old wifi driver (1.0 release), but the situation didn't got any better.
my question is, how can i restore the original driver from foliomod 1.4?
is it possible without total reinstall of the foliomod?
thanks
I have same problem, I reflash 4-5 times FolioMod1.4 and FolioNotion but no luck.
Jon2555 said:
I have same problem, I reflash 4-5 times FolioMod1.4 and FolioNotion but no luck.
Click to expand...
Click to collapse
euhm no, my question is not the same. i want to restore the 1.4 driver again, WITHOUT reflashing the whole foliomod 1.4. (if it is possible)
hessel128 said:
euhm no, my question is not the same. i want to restore the 1.4 driver again, WITHOUT reflashing the whole foliomod 1.4. (if it is possible)
Click to expand...
Click to collapse
What's the matter? Reflash Foliomod 1.4, it doesn't wipe data partition. You don't lose anything.
Topogigi said:
What's the matter? Reflash Foliomod 1.4, it doesn't wipe data partition. You don't lose anything.
Click to expand...
Click to collapse
thanks for your answer, i hadn't thought about that. but with the total rom, it was said to wipe before and after. and there probably comes some stuff with it again that i don't want. of-course i can uninstall that, or apply my settings again.
haha, but i wanted the easy way, only the wifi driver from 1.4 and not the total rom. the problems keeps coming on the folio, so i guess i have to reflash foliomod for the wifi driver only.
(or does someone still have the 1.4 wifi driver stand alone?)
Related
In the past couple weeks, my thunderbolt will not charge pass 86% percent. If anybody have any solutions, it will be greatly appriciated.
asmk20 said:
In the past couple weeks, my thunderbolt will not charge pass 86% percent. If anybody have any solutions, it will be greatly appriciated.
Click to expand...
Click to collapse
recalibrate your battery by clearing the battery stats?
Please let me know if you find a solution, mine is doing the same...
tried rooting and wiping the battery cal, but no luck...
tried different batteries and chargers, still no luck....
thanx
Danny
What kernel are you on and what ROM?
Most if not all of the time, your charging issues are kernel related.
Sent from my Synergized Thunderbolt via XDA Premium App
im running complete stock (as far as I know)
2.2.1
baseband 1.39.00.0627
kernel 2.6.32.21
build 1.70.605.0
thanx
Danny
inferno1 said:
im running complete stock (as far as I know)
2.2.1
baseband 1.39.00.0627
kernel 2.6.32.21
build 1.70.605.0
thanx
Danny
Click to expand...
Click to collapse
Wow! You need an updated kernel!!! That's from March or April.
Flash Synergy and the MR3.25 Radio.
Synergy: http://androidfilehost.com/XxXViRuSXxX/roms/synergy/thunderbolt/
MR3.25 Radio: http://devious-intentions.info/modules.php?name=Downloads&cid=22
For the radio, scroll to the bottom and find 3.25 Radio and click the download button in the bottom right.
Put the radio on the root of your SD Card and rename it to PG05IMG.
Flash the radio, then boot into recovery. Wipe fully!! Then flash Synergy.
Thank me later!
I'm running burnth3ory with the kernel that came with it, on 802 radio. It happens on other Tom's, kernals, and radios. I tried wiping battery stats and it doesn't solve the issue.
CanesDrew said:
Wow! You need an updated kernel!!! That's from March or April.
Flash Synergy and the MR3.25 Radio.
Synergy: http://androidfilehost.com/XxXViRuSXxX/roms/synergy/thunderbolt/
MR3.25 Radio: http://devious-intentions.info/modules.php?name=Downloads&cid=22
For the radio, scroll to the bottom and find 3.25 Radio and click the download button in the bottom right.
Put the radio on the root of your SD Card and rename it to PG05IMG.
Flash the radio, then boot into recovery. Wipe fully!! Then flash Synergy.
Thank me later!
Click to expand...
Click to collapse
Thanx for the response, but isnt the kernel Im on the stock one?
Back when I used sense based gingerbread I know it would take forever for it to charge at some spots. However, I would think that would have been solved with the newer leaked sources.
If you're using a AOSP/CM7 based ROM, I'd gather it's the ROM or something was messed up when you installed it somehow. I'd try reinstalling and totally wiping all of the internal storage (system, data, etc). And do it from recovery, not rom manager. If it still doesn't work, I would ask the developer of your ROM about it.
yareally said:
Back when I used sense based gingerbread I know it would take forever for it to charge at some spots. However, I would think that would have been solved with the newer leaked sources.
If you're using a AOSP/CM7 based ROM, I'd gather it's the ROM or something was messed up when you installed it somehow. I'd try reinstalling and totally wiping all of the internal storage (system, data, etc). And do it from recovery, not rom manager. If it still doesn't work, I would ask the developer of your ROM about it.
Click to expand...
Click to collapse
Any slow charge issues are kernel related. Especially if he's tried other batteries and getting the same result.
Flash a new kernel or new ROM/kernel combo and you'll be good. I promise.
Tried flashing many different rom and kernel combinations these past few weeks with no luck.
fingers crossed that when we get 2.3 it may magically fix the issue
i tried installing CM7 alpha 3.5. first install went okay fully. went to reboot and boot up and after i clkick cyanogenmod in the dual boot loader, it will display cyanogen icon and load for about 8 - 10 seconds then restart. keeps going in that order. tried erase/wipe all, dalvik, cache, etc... i am not sure what hapopened. does anyone have any ideas for me?
thanks in advance!
Bad zip?
Are you coming from a earlier version of cm7?
Or is it a first time flash for the touchpad?
Bear gri11z said:
Bad zip?
Are you coming from a earlier version of cm7?
Or is it a first time flash for the touchpad?
Click to expand...
Click to collapse
coming from alpha 3. not first time flashing. havent had problems before. tried redownloading the zip 2x
i had the same issue with miui. took me a day to figure it out, as there are few posts on this. you must "wipe sd" in cm recovery before installing the rom. do a backup first. it doesnt touch the webos area.
-ben
bensdeals said:
i had the same issue with miui. took me a day to figure it out, as there are few posts on this. you must "wipe sd" in cm recovery before installing the rom. do a backup first. it doesnt touch the webos area.
-ben
Click to expand...
Click to collapse
tried to do clockwork recovery. finished backing up boot, then went to back up system and restarted.
how do you wipe sd? do you mean partition it?
A sort of solution
I upgraded from 3 to 3.5 as well and I got in to a bootloop as well do I downgrade then re-upgrade or what, any help would be great.
EDIT: After posting this I reinstalled 3.5 and it's working but i'm never going to turn off android again at least until ICS
KJSOARES2 said:
I upgraded from 3 to 3.5 as well and I got in to a bootloop as well do I downgrade then re-upgrade or what, any help would be great.
EDIT: After posting this I reinstalled 3.5 and it's working but i'm never going to turn off android again at least until ICS
Click to expand...
Click to collapse
did you perform any other steps? you just installed 3.5? nothing special?
edit: i tried reinstalling 3.5. i tried redownloading it ot make sure it wasnt corrupt. nothing happened. it reboots during the installing system partition.
I wiped the cache and dalvik other than that I did nothing special, then I just re-installed it and it's working so far.
I installed PSX4Droid 3.0.5 on my X10 and configured it. Then I loaded the Digimon World 2003 ROM.
After successfully playing the game for ~40min. I decided to install the 3.0.6 version, but then the game wouldn't load and I started getting WLODs.
I tried going back to the previous version of the app but the problem persisted.
I even went to xRecovery to make a Restore and then installed the app again, but I still get those damn WLODs every time I try to load the ROM -.-
Does anyone know what might be causing this and how to solve it?
AX10i said:
I installed PSX4Droid 3.0.5 on my X10 and configured it. Then I loaded the Digimon World 2003 ROM.
After successfully playing the game for ~40min. I decided to install the 3.0.6 version, but then the game wouldn't load and I started getting WLODs.
I tried going back to the previous version of the app but the problem persisted.
I even went to xRecovery to make a Restore and then installed the app again, but I still get those damn WLODs every time I try to load the ROM -.-
Does anyone know what might be causing this and how to solve it?
Click to expand...
Click to collapse
Which kernel are you on?
Any overclock/undervolt?
Also which governor do you use?
WLOD indicates kernel panic.
DoomKernel 4b
No overclock, nor undervolt.
I use smartass v2.
Sent from my X10i
AX10i said:
DoomKernel 4b
No overclock, nor undervolt.
I use smartass v2.
Sent from my X10i
Click to expand...
Click to collapse
Try another governor, like ondemand or interactive. You could also briefly go back to stock kernel just to check if the problem is solved!
Did all that but still it didn't solve the problem. :/
It was working fine at first. I don't get what went wrong :s
Sent from my X10i
AX10i said:
Did all that but still it didn't solve the problem. :/
It was working fine at first. I don't get what went wrong :s
Sent from my X10i
Click to expand...
Click to collapse
Even going back to stock kernel didn't solve it?
No. And I even went to stock firmware.
Sent from my X10i
Have you tried wipe its data?
(only by this app)
Or even if it doesnt affect it, dalvik-cache. Because it seems to be related with some new configuration.
Yes, I wiped its data as well as dalvik-cache.
Sent from my X10i
Hmmm... Very strange - i cant understand it.
If cache and dalvik is wiped, it is almost as factory reset (have you tried factory reset?).
Last thing you could do is repair via SEUS. If it doesnt help, it means, that your hardware is damaged (possible not caused by software).
Or optionally, enable USB debug and run logcat from your computer -> cause WLOD and post here log.
Are u tried another bios file?
Sent from my xperia "z10i"
Yes, I did try replacing the BIOS file as well as the game .bin & .cue files.
Earlier I deleted the data again and ran it without configuring. Surprisingly, it worked. Then, while in-game, I went to the Settings and configured it. When I got out of the Settings it was still working and I kept on playing with my configurations. I saved the game state, exited the app and ran it again. It was still working.
Then I rebooted my X10, but when I tried running the game again... WLOD -.-
Sent from my X10I
HeliumX10 said:
Or optionally, enable USB debug and run logcat from your computer -> cause WLOD and post here log.
Click to expand...
Click to collapse
It's attached.
I'm sorry if it's longer than it should be, but I didn't want to risk deleting important lines.
Hello,
i have a problem with my wifi.
i 've just put version 2.3.7 and my wifi doesnt show me
the available networks.i cant find any solutions.
please help!
im facing a similar case which the wifi signal disappear after 24hours i install/recover back to the normal state.
i set a backup point just before everything went wrong, and whenever the wifi signal disappear after 24hours, il go back to CWM and recover the previous state again and again.
initially i can go online with wifi, signal detection is ok. after 24hours, the signal disappear and i cannot detect any wifi anymore. restarting the unit, clearing cache does not cure. i even tried the method given by SpitFire-ZX this, yet the is no option for selecting NO and YES in step (6). the system jump directly to a reboot and log in like usual.
anyone?
Reinstall the rom, with wiping data/factory reset, and wiping dalvik cache.
Mrakoris/ said:
Reinstall the rom, with wiping data/factory reset, and wiping dalvik cache.
Click to expand...
Click to collapse
done that, in vain.
siuyilee said:
done that, in vain.
Click to expand...
Click to collapse
Restore your phone to stock 2.1, root, flash kernel, install the rom, оbserving instructions and vuala-no problems at all
Mrakoris/ said:
Restore your phone to stock 2.1, root, flash kernel, install the rom, оbserving instructions and vuala-no problems at all
Click to expand...
Click to collapse
means that i redo everything from scratch? thanks.
siuyilee said:
means that i redo everything from scratch? thanks.
Click to expand...
Click to collapse
Yes, install miniCM7 from zero
I think your router may be involved here..Because the given ip usually expires in 24 hours,
I had the same problem with all, and i mean ALL 2.3.7 roms
Whats worse, my wifi would disconnect every 20~30 secs. : /
So then i reserved an IP for my mobile onto my router..and viola! wroks pufect!!
Do check out how to reserve your phone onto your router, I strongly think that maybe your problem!!
speedsys said:
I think your router may be involved here..Because the given ip usually expires in 24 hours,
I had the same problem with all, and i mean ALL 2.3.7 roms
Whats worse, my wifi would disconnect every 20~30 secs. : /
So then i reserved an IP for my mobile onto my router..and viola! wroks pufect!!
Do check out how to reserve your phone onto your router, I strongly think that maybe your problem!!
Click to expand...
Click to collapse
i sold my u20i, yet i think the new owner will be reading this one day. thanks for the tips~
Mrakoris/ said:
Reinstall the rom, with wiping data/factory reset, and wiping dalvik cache.
Click to expand...
Click to collapse
I did all this and after 3-4 days my wifi is "disconnected" as it says...pfff i cant find a solution....
My wifi is not turning on?? I don't know what caused the problem but I think this happened after i installed ICS theme.
I have S-Off, the leaked May Hboot, an ICS ROM (Nils' Business ICS 3.4 S-off version), but the ICS radios simply do not work.
Today I tried them and had barely functioning cell reception, crap battery life, and only 1x data.
Then I flashed the OTA GB radios, and everything was perfect. Lightening fast 4g, killer cell reception, and great battery.
Why?
Thanks for any help you can provide.
The Beeb
Try this one. There are a couple floating around that may have problems but this one works for me
ICS Latest Radio
Just remove everything in the name before the PH and flash in bootloader (I know, you know this but others may not)
May also want to match the kernel
Thanx, Nils. I'll try it after work today.
BTW, I'm on your new kernel release, and it's running great.
BBEgo said:
Thanx, Nils. I'll try it after work today.
BTW, I'm on your new kernel release, and it's running great.
Click to expand...
Click to collapse
Pretty sure you were so let me know how you make out.
If it ain't broke don't fix it. There are people who would kill for "Lightening fast 4g, killer cell reception, and great battery. "
Kane5581 said:
If it ain't broke don't fix it. There are people who would kill for "Lightening fast 4g, killer cell reception, and great battery. "
Click to expand...
Click to collapse
What you say makes perfect sense, and I even agree with you.
There's just this tiny voice in the back of my head that keeps shouting "Yeah, but WHY?!?"
After updating radios, may need to have stock recovery installed and do a factory reset in hboot, then reflash recovery, rom, & kernel.
Snuzzo said:
After updating radios, may need to have stock recovery installed and do a factory reset in hboot, then reflash recovery, rom, & kernel.
Click to expand...
Click to collapse
Are you asking or telling?
i flashed the latest radio while on my latest ROM with the latest leaked kernel with not problems.
NilsP said:
Are you asking or telling?
i flashed the latest radio while on my latest ROM with the latest leaked kernel with not problems.
Click to expand...
Click to collapse
Just mentioning is all. I had issues myself with data+voice until doing the above. Now I have spot on 4g and calls are crystal.
EDIT:
That was with the older leak, same radios.
Snuzzo said:
After updating radios, may need to have stock recovery installed and do a factory reset in hboot, then reflash recovery, rom, & kernel.
Click to expand...
Click to collapse
+1 you probably NEED to do this.. I know I always do..
In superchilpil's firmware thread he does say to wipe and reinstall or you'll have 4g problems.
http://forum.xda-developers.com/showthread.php?t=1614366
"YOU MUST FACTORY RESET IN THE BOOTLOADER TO FIX DATA ISSUES"
Actually it was Snuzzo who informed me that I need to do that after not reading all the words on the flashing instructions. You know figured I would just skip that part well thats fine if you want your data dropping in and out, no 4G and just general ****tyness..
I did a wipe/factory reset in bootloader, and then restored a CWM Backup of Nils' ROM.
When that didn't work, I did it again and wiped everything and started over with a fresh install... No joy.
Snuzzo said:
After updating radios, may need to have stock recovery installed and do a factory reset in hboot, then reflash recovery, rom, & kernel.
Click to expand...
Click to collapse
I skipped the recovery step... That's gotta be the problem.
BBEgo said:
I did a wipe/factory reset in bootloader, and then restored a CWM Backup of Nils' ROM.
When that didn't work, I did it again and wiped everything and started over with a fresh install... No joy.
Click to expand...
Click to collapse
You have to have the stock recovery in order to factory reset in the bootloader. If you have a custom recovery such as cwm or ra it won't do the reset needed for the radio to work correctly.
Flash stock recovery
Factory reset
Boot to make sure radios work right
Fastboot install custom recovery
Restore backup
Sent from my ADR6425LVW using Tapatalk 2