I'm running Team Whiskey's Bionix-v version 1.3.1, and I flashed the Dragon kernel. After doing so, I noticed that whenever I plugged my headphones in, WiFi calling would crash. WiFi calling would then be non-functional until I rebooted the phone, even after unplugging my headphones.
I flashed Overstock to see if it was just a problem with Dragon, and the same thing is still happening. I've tried re-flashing WiFi calling, but that didn't help. I could flash back to the kernel that comes with Bionix, but I like having features like BLN.
I'm a bit confused, so any help would be greatly appreciated!
Related
I am running the current leak of Froyo... if I bluetooth connect to my car audio system for hands free calling I lose all external sound when I disconnect. I have gone through all the audio settings with nothing appearing out of place. The first Froyo rom I tried redirected the ringer out the earpiece, the new leak kills it completely. All ideas welcome.... I will try anything. Thanks in advance!
Sent from my SGH-T959 using XDA App
I will take one more swing at this. Anyone?
Sent from my SGH-T959 using XDA App
Download this widget it will toggle the audio and should give you external sound let me know if this works worked for me
http://code.google.com/p/toggleheadset/
Onyx powered vibrant
Thanks for info, unfortunately it didn't fix the issue for me. Back to square one.
Sent from my SGH-T959 using XDA App
I'm having the same issue. each time I connect to my car's bluetooth audio and made a call, I'll lose the notification sounds. even calls won't ring.
currently had to resort to phone's speaker function, but that won't do.
am scouring the net for some answers, and will update if i found anything.
Samsung Galaxy S
How was there no reply to this? I have had the same issue on every samsung vibrant 2.2 rom, including custom roms. now i am having the same issue on my stock galaxy s 4G! Help?
Bump!
Running Nero on Galaxy S.
Same problem with Vibrant + Froyo 2.2
Sounds strikingly similar to my experience with my Samsung Vibrant running Froyo 2.2 + custom Axura 2.3.1.3 ROM.
After disconnecting any bluetooth device, in some cases the phone's speaker is completely muted (media/system/notification volumes all cranked to max) until I either reboot or make a voice call and enable speakerphone.
I've hunted high and low on the webternets for a solution and have come up dry.
I smell a bug.
Same problem Stock Vibrant 2.2
Bughound said:
After disconnecting any bluetooth device, in some cases the phone's speaker is completely muted (media/system/notification volumes all cranked to max) until I either reboot or make a voice call and enable speakerphone.
Click to expand...
Click to collapse
Thanks, I guess - at least I don't have to keep rebooting since the voice call/speakerphone workaround gets my sound back. This is a PITA.
I have the same issue in MIUI_Au since 1.10.x revisions (previous versions worked OK). I had exactly the same problem 6 months ago with Villain ROM and it was the reason I dumped it. It seems to be a CM7 issue...
Bughound said:
make a voice call and enable speakerphone.
Click to expand...
Click to collapse
Thanks for that...keeps me from having to reboot. And I'm even running (embarrassingly) the 2.2 update direct from Samsung. Need to finally take the time to root…
Hi, I seem to be having a problem with my phone and I can't seem to resolve it. Back speaker works perfectly while playing music, playing game and watching youtube videos. Also works fine when I set a ringtone and it plays a sample. But when I receive a call instead of the back speaker ringing it is the front one that ring, yes the earpiece. I was wondering if anyone has an idea how to fix this?
I'm currently using a default android ringtone.
Using the stock JK6 Rom with the JL1 Baseband and the Stock JK6 Kernel injected with Voodoo 5.X
I can't say for sure which of these flashing caused the problem since I flashed them all one after another unable to test and detect such problem.
Thanks.
Resolved! It's a behavior of the WiFi Calling App, guess I'll have to install another one.
Hey,
I had the stock 2.1 on my vibrant.
I upgraded a few days ago to Vibrant AOSP ish JK2 1.1 Official FROYO (http://forum.xda-developers.com/showthread.php?t=832532).
After the upgrade I had 3 issues:
1. I have an fm trasnmitter in my car, and I'm connecting the phone to it. Works for music but doesn't work for calls. It worked before, and my earphones also work.
2. Couldn't get to recovery mod through rom manager.
3. the GPS is still not working.
It's funny that I currently more upset about issue 1, because I already accepted the fact that my GPS will never work + I think I'll stick to this rom in case I'll find a way to make the audio out work for phone calls.
Do you have any suggestions?
Thank you.
Try reflashing the rom. Go back to stock again, and repeat the whole process.
+1 to dj's idea
I have CM7 Trigger Redux build 13 with glitch kernal installed. For awhile now I've routed my audio to my car with an audio cable to listen to pandora. Since I've put this new rom and kernal on, I've noticed that there seems to be intermittent crackle with the audio which seems to only occur when the audio outputted through the cable. I've downloaded voodoo control app and played with the settings but nothing seems to be working to remove the crackle. Is there anyone else facing the same issue and is there a fix? Thanks
I have this same problem too, but I use a headset. Its only when I use a custom kernel (I believe) that I will get this problem. Since you installed Trigger CM7, he has a custom kernel in place, I suggest switching to CM7 nightlies to try the stock kernel.
Thats too bad, I really liked this rom. Would it be possible to simply flash the stock CM7 kernel on Trigger CM7?
hzm i just flashed my phone with this one and I haven't tested in my car yet. I'll do that and report to you guys soon.
jonno92 said:
Hi everyone,
I've been running CheckROM v6 since its release and loving it. However, I'm having some issues currently with sound.
Everything was working until I changed my kernel and modem in the Kitchen. I changed to NEAK kernel and XXKI4 modem, and my sound started to play up. It didn't seem as loud as normal, and sometimes my alarm would go off but no sound would play (Alarm Clock Xtreme Paid version and free version). Also, when I open Zedge ringtones, when I am 'previewing' the ringtones no sound plays at all. I tried changing my modem and kernel (changed to Redpill + XXKI1) and there's no change.
My phone still rings and my message and Facebook notification tones work, as does my bootanimation sounds. Seems like the System sounds aren't working or something?
Any ideas?
Cheers!
UPDATE: I've downloaded Volume Control app and turned up the system and alarm volumes - and it's still not working!
Click to expand...
Click to collapse
ozzyita said:
Make a call with speaker phone on that should sort it out
Click to expand...
Click to collapse
This definitely fixed my problem instantly! However, I keep getting the issue sometimes, which is annoying because sound in some apps don't work, and my alarm doesn't go off some mornings!
I've tried different kernels and different modems and I keep running into the problem sometimes. Also, my phone lags ALOT when I'm switching between phone/speakerphone/bluetooth headset. I miss out on about 10 seconds of the conversation when I get out of my car and change from bluetooth to speaker. I'm guessing this is a related problem so was wondering if you had suggestions on how to fix it permanently?
I use my phone for business purposes so I don't want to lost 10 seconds of conversation when switching from bluetooth to speakerphone
Any help would be much appreciated!
Cheers
I think it would be better if you do Factory reset but before doing that just don't forget to BACKUP your Contacts and other valuable apps...
Hope This helps..
Hmmm I'd prefer not to if there's an easy fix for the bluetooth issue. I can switch between phone and speakerphone easily, but when I turn bluetooth on then it always stuffs up.
I think it's ever since I flashed the 'Fully Modded Phone' mod, which I've now flashed over with a different Phone mod but the issue is there still...
Anyone else have any ideas? I've reinstalled the Phone apk from the original CheckROM v6 install and I'm still getting the same issues.
Noone else is having this problem?
I'm having a similar issue...
Upgraded from checkrom v4 to v6 previously and had various issues so went back.
This time though I did a full wipe first and now v6 works fine.... except when using it in the car with my Parrot MKI9200 bluetooth car kit.
Now whenever I answer a call there's about a 2-3 second lag before the sound cuts in. Making calls works ok but there's still a lag between dialing and the phone display/audio catching up.
I'm sure if I go back to v4 again it'll be fine as that was one of the issues I had before.
I've deleted / readded the pairing etc but no effect.
Any ideas?
hmm anyone found a fix for this yet?
??