Have anyone put Bionix-v 1.3.1 rom on there Telus Fascinates? I'm new to all this and don't want to brick my phone. So far Ive rooted it and installed Supercurio's Stock+Voodoo kernel. Ive seen that if there is any bootloader in the rom it will brick. Is there any in this rom?
Thanks
Put this in Captivate, you may get more answers.
Samsung Fascinate, Verizon
EB01 Superclean 2.4
Kenesis' TransMyst GBKB (EPIIIIIC)
Mob87's Honeycomb Theme
Stock Kernel
Any one knows whats the biggest difference between Darky's and Bionix?
Thanks!
00Droid00 said:
Have anyone put Bionix-v 1.3.1 rom on there Telus Fascinates? I'm new to all this and don't want to brick my phone. So far Ive rooted it and installed Supercurio's Stock+Voodoo kernel. Ive seen that if there is any bootloader in the rom it will brick. Is there any in this rom?
Thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=923712
this might help actually.
read carefully about sbl.bin & family (!) if you don't want to brick your phone
Hey.
I thought i could offer some insight, even though i'm pretty new to the scene myself.
I had flashed bionix 1.3.1 onto my telus fascinate as well, and it did not have a bootloader. You might want o to follow the link v260 posted and double check the zip file.
I did not keep it for too long since as i read elsewhere on the forums, bionix did not give me a working gps. I'm not sure if others experienced it, but i also noticed a bit of battery drain (with and without voodoo enabled).
Related
I am wanting to know if you can flash any froyo kernels on atriac v1 and also modems. Thanks for all the help to in advance. Also the Ka7 kernel is no good in my area any suggestions
You will be fine I was using overstock 1.5 til a few minutes ago now I'm using tiger's blood v2. As far as a modem you may want to try Kb1 a lot of people seem to have good things to say about that one but it all depends on where your at.
Any Vibrant froyo 2.2 kernel/modem will work with our 2.2.1 builds.
Yes, care has been taken to ensure maximum compatibility between our 2.2.1 releases and available vibrant kernels. Be sure to read the kernels install instructions prior to flashing too.
Sent from my Atriarc powered, EDT approved, Vibrant.
Hey guys, new here. I read a "how-to" and sucessfully rooted my Vibrant, im running ADW launcher and the honeycomb theme, and im loving it so far. But like i said im new here and was wondering if I can put JK6 on my vibrant?
im rooted and running 2.2 froyo JK2.
I planned on using ODIN, also there is so much info on this site im a bit overwhelmed.
Do you have any ROM suggestions? I dont know what I should try next.
open to suggestions, thanks!
Im using ka6 w/voodoo modem and its blazing fast for me here in orlando
Using Bionix V-1.3
oppss my bad, I had a typo.
I meant to say can I put Ka6 modem on my 2.2 rooted vibrant running JK2
I'm using Vibrant 2.9.1 with Overclock 2.2.1. Fast and works well. I just moved over from a BlackBerry a week ago so I love it.
GalaxySteve said:
oppss my bad, I had a typo.
I meant to say can I put Ka6 modem on my 2.2 rooted vibrant running JK2
Click to expand...
Click to collapse
Yes you can check the bible for modems.
http://forum.xda-developers.com/showthread.php?t=991267
another list of modems
http://forum.xda-developers.com/showthread.php?t=868774
As far as what rom to run I think you need to try a couple of them out. It's kinda a personal taste. I am running trigger 2.9.1
GalaxySteve said:
oppss my bad, I had a typo.
I meant to say can I put Ka6 modem on my 2.2 rooted vibrant running JK2
Click to expand...
Click to collapse
Yes, you can.
Sent from my SGH-T959 using XDA Premium App
GalaxySteve said:
oppss my bad, I had a typo.
I meant to say can I put Ka6 modem on my 2.2 rooted vibrant running JK2
Click to expand...
Click to collapse
Yes and you can find a cwm flashable one here and on team whiskey site...ill try to find a link for ya
http://board.teamwhiskey.com/viewtopic.php?f=3&t=1322
And nomadrider found you the links for here
Using Bionix V-1.3
I am running a stock 2.1-update1 TMO Vibrant.
I have previously run Obsidian and also some team whisky axura flavor, before going back to stock 2.2.
I had stock 2.2 until I tried to flash the newest overstock kernal last night and bricked my phone.
I had a stock 2.1 recovery laying around, so long story short I am now at 2.1 stock.
I would really like to flash the latest overstock along with a good ROM but am not sure if I should be doing it from 2.1 or if I should kies up to 2.2 and then start.
Also, this whole red CWMR thing has me thoroughly confused. Where is this mysticl red lockworkmod and how do I flash it?
I was thinking Bionix-X for my new rom, but would appreciatte some feedback or other suggestions from the community on what roms are 'best'.
Thanks for any assistance, I appreciatte all info.
baywatch said:
I am running a stock 2.1-update1 TMO Vibrant.
I have previously run Obsidian and also some team whisky axura flavor, before going back to stock 2.2.
I had stock 2.2 until I tried to flash the newest overstock kernal last night and bricked my phone.
I had a stock 2.1 recovery laying around, so long story short I am now at 2.1 stock.
I would really like to flash the latest overstock along with a good ROM but am not sure if I should be doing it from 2.1 or if I should kies up to 2.2 and then start.
Also, this whole red CWMR thing has me thoroughly confused. Where is this mysticl red lockworkmod and how do I flash it?
I was thinking Bionix-X for my new rom, but would appreciatte some feedback or other suggestions from the community on what roms are 'best'.
Thanks for any assistance, I appreciatte all info.
Click to expand...
Click to collapse
Hi, ok...lets clear some stuff first:
1. The red CWM Recovery means its a VooDoo injected kernel....almost all custom ROMs and kernels have VooDoo in it so it will be red.
2. The easiest way is to upgrade to a 2.2 ROM and get the Overstock kernel is to go back to stock 2.1 (which i see you've done already) re-root....DL ROM Manager and flash CWM recovery (which will be green at first), then DL the 2.2 ROM you want, like Bionix-V 1.3.1 and put it on your sd card and flash it.....like i said almost all custom ROMs come with a red VooDoo CWM recovery....so after you flash it....it'll be red....then you can continue to flash Overstock..
Thank you for such a concise (and quick!) response, greatly appreciatted.
Or just flash malice which comes with overstock
Sent from my GT-I9000 using XDA Premium App
Good evening all. I am wanting to go from Dark Revenge (Non-Voodoo) to Kaos V7. Anything I need to know before hand? I tried to sift through he Kaos thread for clues but couldn't find anything.
Any help would be appreciated.
I cant imagine why you would be on nonvoodoo, but for kaos v7 you must be on a voodoo kernel prior to flashing. However, with Jt's CM7 you do not need a voodoo kernel.
current setup:
bionix-V 1.3.1
Bali-X 1.2GHZ
KB5 modem
this ROM and kernel are freshly flashed after odining back to JFD. phone currently runs smooth. no problems. havent done anything else.
problem is i NEEEED a 4 tab lock screen. and im having trouble understanding all the KB1/KB5/ deodexed stuff.
my baseband version is KB5 (since flashing KB5 modem) but my ROM is still based on KB1? see, i dont really know what this means or have any idea what im talking about there...
but i know that this mod requires "KB5" and when i flash it, my phone freezes during the install.
now this is expected. someone else in the thread had the same issue bionix-v 1.3.1 and they were told to "make sure" their rom is compatible (cuz bionix-v 1.3.1 is not)
i dont know how to "make sure". And i could just flash another rom that someone else has used with that mod, or i could use a rom that comes with a 4 tab lock screen like Toxic Crazy8... but i am particular about a few other things:
- i really like the speed of bionix-v 1.3.1
- i like the gingerbread theme with bionix-v 1.3.1 and the launcher (im not using the version that comes w/ touchwiz)
- i like the option to overclock (which is why i changed kernels from the one that comes with bionix-v 1.3.1)
- i definitely need BLN support (which is another reason im changed to Bali-X 1.2GHz)
- i did not like Toxic Crazy8 or any of their themes for it and for some reason my cpu would not drop below 800MHz. i also did not like using CM7, found it slow for some reason.
so how can i have the things i like AND have a 4 tab lockscreen?
ps- i sure wouldnt mind using the new ice cream sandwich theme or something with a lot of blue
You flashed back to stock giving you eclair 2.1, this rom/addon is froyo. check your firmware under settings, about phone, are you eclair or froyo? whitehawx has a deodexed 2.2 kb5 stock rom in the dev setion.
i have 2.2 (froyo) becuz i have bionix. but nothing said anything about KB5 until i flashed the KB5 modem. and of course nothing says anything about deodexed
i'd hate to have to load a stock ROM with all the bloat and no fancy tweaks or themes or anything...
could i still use a kernel like bali-x? (i guess i can ask that question over in that thread...)
it seems that a number of mods and themes and whatnot require a deodexed ROM but i dont see many mentions of deodexing in the descriptions of the popular ROMs...
I believe whitehawkx lockscreen addon was for biwinning. bionix is a team whiskey pre deodexed build. check the ops I may be wrong but if you want the lockscreens, bi winning is a good build.
Sugartibbs said:
if you want the lockscreens, bi winning is a good build.
Click to expand...
Click to collapse
cool, im gonna check that one out. thanx
Update: OMG greatest ROM ever! thank you so much for the recommendation! i was getting so tired of playing around with different ROMs but i hadnt tried this one yet. EVERYTHING i want