DUMMIES, FOLLOW THIS STEPS TO INSTAL MIK_OS GINGERBREAD CYANOGENMOD 7 PORT:
FIRST OF ALL GO HERE AND READ MIK's POST and thank Mik for his work!!!!!!!!!!!!
READ THE CHANGELOGS AND THE KNOWN BUGS!!!!!
Let's suppose you have Froyo on your device and want to go Gingerbread:
- you need: root, custom recovery, and rom zip from here
- boot into recovery, go to backup/restore and do a backup. For your own privet safety, you could use TitaniumBackup before booting into recovery to backup your files and settings.
- while in custom recovery, go to wipe and perform all wipes. WIPE DATA AND CACHE IF YOU ARE UPGRADING FROM FROYO! Go to adb shell and make a /system wipe (mount /system in recovery; adb shell rm -rf /system/*), or copy this file on sd, and flash it via cusom recovery to automatically wipe your /system data
- after the wipe, put your rom on the sd card - get the beta2 here , and flash it from custom recovery.
- wait until it boots up and set the phone up. If you're stuck on LG logo it means you didn't performe the wipes corectly, mainly the system wipe.
- you will have no google apps after the install, so go here and get them, or manually download them from market
- you now have Mik_os unofficial CyanogenMod 7 2.3.3 on you phone. Install TitaniumBackup and perform a restore if you used this metod to backup your data as i described in the second step.
Now, if you have an older version of Mik's CM7:
-boot into recovery and flash the newer version just like that. It will update the one you have on your device, and no data will be lost.
GO AGAIN TO THE OFFICIAL DEV THREAD AND RE-READ THE BUGS AND CHANGELOGS. AND AGAIN... THANK MIK FOR HIS WORK!!!!!
If you have questions about Mik's port, go to the correct thread and ask them! This is not a developer thread, it is just for info, or for those of you who are new to xda and cannot post in dev threads.
AND AGAIN, THANK MIK FOR HIS WORK, AND BUY HIM A LOLLYPOP VIA PAYPAL.
I have tried your steps but could not install this ROM. It got stuck on the boot animation. An it wasn't CM7 animation. Tried few times but without any luck. Now i am back to my old rom. atleast i did not brick my phone but i will sure give it a another try
You are probabily stuck at the lg logo. You should try to wipe the system manually, by adb or flashing the zip I linked in the original post, in the third step. I had the same problem, but this solves it.
Sent from my LG-P500 using XDA App
Ruwin said:
You are probabily stuck at the lg logo. You should try to wipe the system manually, by adb or flashing the zip I linked in the original post, in the third step. I had the same problem, but this solves it.
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
I wasn't stuck on LG Logo. I had Megatron installed, it went through LG logo, then got stuck Megatron's Android Logo. Seems the rom was never installed properly and i have tried few times.
I have wiped everything, i have flashed from the zip you provided, and also i re-partitioned the sd card but it never worked
Did you got any errors when flashing cyanogen zip? From what you said, I think you shoul rewipe everything, part the sd 0 swap, ext 2 to ext3 and ext3 to ext 4. Make sure that you have the check for signed option in custom recovery.
Sent from my LG-P500 using XDA App
Ruwin said:
Did you got any errors when flashing cyanogen zip? From what you said, I think you shoul rewipe everything, part the sd 0 swap, ext 2 to ext3 and ext3 to ext 4. Make sure that you have the check for signed option in custom recovery.
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
I have done all of the above, may be the zip file got corrupted. Anyway, i will try again this weekend. thanks
How did you do the system wipe? You flashed the zip for wipeing or did you do it from adb shell?
I have another friend that flashed the /system wipe tool, and forgot to flash the actuall rom zip file, and had the exact simptomes as you described.
Sent from my LG-P500 using XDA App
Ruwin said:
How did you do the system wipe? You flashed the zip for wipeing or did you do it from adb shell?
I have another friend that flashed the /system wipe tool, and forgot to flash the actuall rom zip file, and had the exact simptomes as you described.
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
I used custom recovery, nandroid back up, then re-partition the sd card. then wiped the card, then usb toggle to copy 2 zips on to sd card. flashed debug system just in case and then flashed mik's rom. I don't know where did it go wrong.
Would have been great if someone made a step by step video and put that on youtube
Have you wiped cache/dalvink cache/android secure and the rest from the wipe menu?
Sent from my LG-P500 using XDA App
Ruwin said:
Have you wiped cache/dalvink cache/android secure and the rest from the wipe menu?
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
Yes, I think so. Don't worry about it for the moment. if it worked for you, it will work for me too. I may have missed something that i can't remember. I will give it a try again this weekend
Although if you could give me the Partition requirements. I know the swap should be zero. But how much should i use for ext2?
Ext partiton can be how big you want, it's where a2sd puts the files and other cache info. I use 512 mb, and works flawless.
I will make a video guide in the morning, and link it in the original post.
Sent from my LG-P500 using XDA App
Do I need to install that new recovery? Or is the one you posted a link to OK?
There is a new recovery that's been in the development forum for a few weeks that says it's for gingerbread.
thesmoth said:
Do I need to install that new recovery? Or is the one you posted a link to OK?
There is a new recovery that's been in the development forum for a few weeks that says it's for gingerbread.
Click to expand...
Click to collapse
The link i posted goes to another thread that explains some basic stuff. Including the recovery. But i didn't find any problems using different versions of custom recovery. So go for which one you like more, as long as it can backup your system
1. go in recovery mode
2. wipe everything
3. then go to others
4. mount/system
5. flash the system zip
6. flash the rom zip
7. reboot
it worked for me. hope it helps
Ruwin buddy, you will be happy to know that i am using Mik's rom. I still don't know what went wrong last time. If some thing that i had done differently, that would not upgrading ext3 to ext4.
Thanks buddy for the support and the tips
Thank you very much!!! Will try this today.
Is it possible to get the SMS widget back? The simple one from Market sucks...
Do I need to partition the SD-card?? The directions made no mention of this.
how to enable 3G mode only in this rom ?
Good work, very useful.
Related
Anybody got this recovery version... I want it...
Just update with rom manager if you have Root..
Sent from my wildfire
But i only get up v2.5.0.7??
Edited: Got it but why is not fully? As in I installed it then when I reboot is go back to cwm v2.5.0.1? Strange...
1. Open ROM Manager
2. Scroll all the way down to the experimental thing
3. Choose the latest. (3.x.x.x). it will download.
4. Scroll all the way to the top
5. choose reboot to recovery.
6. You will see an installing thing in recovery, after which you will have the new recovery
Edit: whoops sorry that doesnt work lol.
Just download the image from Jacobs thread here and then re-root with unrevoked, you need to select use different recovery from the menu.
But everybody makes sure sd-ext not works!!!
Ext is working fine here....
Sent from my HTC Wildfire using XDA App
Strange Jacob stated and I confirmed sd-ext format under cwr 3.0.0.5 gives error!
Sent from my HTC Wildfire using XDA App
Ok forget the error for now - how do you reroot with unrevoked when it does not work with new framework. I mean true you can do it if you flash the old stock rom and re root again but it seems to be too much effort for nothing.
alsgrigorjevs said:
Strange Jacob stated and I confirmed sd-ext format under cwr 3.0.0.5 gives error!
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
oh yeah sorry my bad it doesnt work
cant mount or format.
However, I`ve found a great solution. When want to perform clean install under CWR3, flash update from SD Card CWR latest version v3.0.0.6 and here it is. Sd-ext and dalvik cache work like a charm.
nhnt11 said:
oh yeah sorry my bad it doesnt work
cant mount or format.
Click to expand...
Click to collapse
Tried to install data2sd but only looping and moved the file from recovery to root worked but then the file are in the wrong place...will it work then?
I dont really understand why the img is in recovery if it should where in root.
I installed in recovery so it go there by itself.
anyone???
Nobody ho can tell me how to get this working?
What Rom did you try to install it on.
Might be worth starting again, flash Rom then the apps, then flash d2SD and only reboot at the end.
Oh and clear system, dalVik, battery and partion too
Dc
Sent from my X10i using XDA App
Check out the quadrant benchmark score guide in my signature. It'll help you out with data to sd. And like droid carp said. Your rom should be the one which supports it.
Cheers!
AdY
Sent from my Xperia X10 using xda premium app
CyanogenMod_6.1.2-Xtremes this is my rom and the best i had so far
I saw other install this a bit after instal rom so i tried but it will not work.but i dont want to change rom this is so good.
But i can back it up and se try if i got it working then.
Yeah try backing it up and then start a fresh and see how it goes. So basically put all the rom stuff into the root of your SD, put the d2sd into your root,. clear caches, partitions, wipe Dalvik, wipe battery then install rom+apps then d2sd. Then reboot.
if youve moved the img from recovery, it sounds like youve done it the wrong way round. IIRC and someone will correct me, the img is just an picture of your back up. you can effectively delete your backed up roms by removing the image.
Dc
Link2sd
Apps2sd guide
SD partitioning
tried install 3 new roms but only loping all the time.....now last time loop for 1 hour i give up i have followd the guide and its not working
Try wolfbreaks Rom, works for AdY and me, install as wolf says, but install d 2SD after you've done the gapps install, then boot wait let it reinstall and let the choppy d2SD settle in,.
Failing that I can only suggest you check you do a repair through seus and start the process again.
Dc
Sent from my X10i using XDA App
Hi after spending a huge time I finally did it and got into recovery and made backup.
Of also made a titanium backup.
Obviously my mem card has backup folders should I save them?
How I mean is there any particular way?
After the answer to above then comes the next problem.
I just need to download the zip file of the custom rom and then just flash directly.
then one more thing
assuming that now I'm in a custom firmware and wanna switch back to the default is it easy?
How do I do the custom recovery? Of the default obviously.:-D
Thanks in advance.
Sent from my LG-P500 using XDA App
Really guys everybody says this and that can someone give at least a proper that gives method to get back to original.
Sent from my LG-P500 using XDA App
Since ur done with recovery n backup,make sure u have the thunderg Custom recovery,clockwork isn't supported my majority of the roms u find here
Save the backup files from the sdcard to ur PC to be safe
Next just download a custom rom that suits ur need,copy it ur sdcard,boot into the recovery with the 3 button combo and just flash the zip from there
All instruction can be found in individual rom threads
Now,going back to the stock rom,its simple and easy
Just download the LG original firware and flash it with KDZ Updater
No warranty will be void so just chill play arnd with ur phone....
Thanks dude +1 for you.
Sent from my LG-P500 using XDA App
And what about the titanium backup? Any use to store it?
I mean I thought that I could go back to the same state using all these and I mean the exact state as now.
if I have to flash with a new rom even if its default only then what it the use of back up that I just did if I won't be using it at all.?
Sent from my LG-P500 using XDA App
divyanshu308 said:
Hi after spending a huge time I finally did it and got into recovery and made backup.
Of also made a titanium backup.
Obviously my mem card has backup folders should I save them?
How I mean is there any particular way?
After the answer to above then comes the next problem.
I just need to download the zip file of the custom rom and then just flash directly.
then one more thing
assuming that now I'm in a custom firmware and wanna switch back to the default is it easy?
How do I do the custom recovery? Of the default obviously.:-D
Thanks in advance.
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
truely make a backup in recovery its worth mentioning which recovery u r using as thunderg 1.2.1 cannot restore so use 1.2 or lower-clockwork is better but it doesnt support installing all rom at this point of time but its better than thunderg.once u get support from all rom its worth installing clockwork.
now the main part
boot into recovery
make a backup of current rom and transfer it to pc
Wipe data/factory reset.
3. Wipe Cache.
4. Wipe sd-ext.
5. Format /system.
6.make partition swap 0 ,ext 512(convert ext 2 to ext 3 ,ext 3 to ext 4- class 4 sd card minimum required for ext4)
7.Select usb ms-toogle |copy the rom image to sd card
6. Intall zip from sd card.|Flash CM7.(if using cm7)
7. Reboot.
8. Done.
hope it was helpful.more tweaks and market zip is provided in differnt rom thread choose accordingly whatever u need.
ENJOY
if u get a bootloop just flash the zip file provided in mik rom for bootloop and then wipe again and flash the rom
AS FAR AS TITANIUM BACKUP IS CONCERNED ONCE U INSTALL THAT IN UR NEW ROM U GET TO RESTORE ALL APLLICATION U HAVE BACKUP EARLIER.JUST MAKE SURE U HAVE SAVED THE BACKUP FILE IN PC AND TRANSFER IT BACK AGAIN.AND IF U WANT TO GET BACK TO ORIGINAL JUST RESTORE THE BACKUP U CREATED EARLIER BEFORE FLASHING NEW ROM.
U CAN CHECK OUT THE THREAD IT MENTION A LOT OF THINGS ABOUT CLOCKWORK AND A2SD AND STUFF http://forum.xda-developers.com/showthread.php?t=1038338
shhbz said:
truely make a backup in recovery its worth mentioning which recovery u r using as thunderg 1.2.1 cannot restore so use 1.2 or lower-clockwork is better but it doesnt support installing all rom at this point of time but its better than thunderg.once u get support from all rom its worth installing clockwork.
now the main part
boot into recovery
make a backup of current rom and transfer it to pc
Wipe data/factory reset.
3. Wipe Cache.
4. Wipe sd-ext.
5. Format /system.
6.make partition swap 0 ,ext 512(convert ext 2 to ext 3 ,ext 3 to ext 4- class 4 sd card minimum required for ext4)
7.Select usb ms-toogle |copy the rom image to sd card
6. Intall zip from sd card.|Flash CM7.(if using cm7)
7. Reboot.
8. Done.
hope it was helpful.more tweaks and market zip is provided in differnt rom thread choose accordingly whatever u need.
ENJOY
if u get a bootloop just flash the zip file provided in mik rom for bootloop and then wipe again and flash the rom
AS FAR AS TITANIUM BACKUP IS CONCERNED ONCE U INSTALL THAT IN UR NEW ROM U GET TO RESTORE ALL APLLICATION U HAVE BACKUP EARLIER.JUST MAKE SURE U HAVE SAVED THE BACKUP FILE IN PC AND TRANSFER IT BACK AGAIN.AND IF U WANT TO GET BACK TO ORIGINAL JUST RESTORE THE BACKUP U CREATED EARLIER BEFORE FLASHING NEW ROM.
U CAN CHECK OUT THE THREAD IT MENTION A LOT OF THINGS ABOUT CLOCKWORK AND A2SD AND STUFF http://forum.xda-developers.com/showthread.php?t=1038338
Click to expand...
Click to collapse
i'm sorry to say as that as it did took a lot of time for me to finally got to recovery i cant remember which one i used.
I guess it was the one from android forums . com.
shhbz said:
truely make a backup in recovery its worth mentioning which recovery u r using as thunderg 1.2.1 cannot restore so use 1.2 or lower-clockwork is better but it doesnt support installing all rom at this point of time but its better than thunderg.once u get support from all rom its worth installing clockwork.
now the main part
boot into recovery
make a backup of current rom and transfer it to pc
Wipe data/factory reset.
3. Wipe Cache.
4. Wipe sd-ext.
5. Format /system.
6.make partition swap 0 ,ext 512(convert ext 2 to ext 3 ,ext 3 to ext 4- class 4 sd card minimum required for ext4)
7.Select usb ms-toogle |copy the rom image to sd card
6. Intall zip from sd card.|Flash CM7.(if using cm7)
7. Reboot.
8. Done.
hope it was helpful.more tweaks and market zip is provided in differnt rom thread choose accordingly whatever u need.
ENJOY
if u get a bootloop just flash the zip file provided in mik rom for bootloop and then wipe again and flash the rom
AS FAR AS TITANIUM BACKUP IS CONCERNED ONCE U INSTALL THAT IN UR NEW ROM U GET TO RESTORE ALL APLLICATION U HAVE BACKUP EARLIER.JUST MAKE SURE U HAVE SAVED THE BACKUP FILE IN PC AND TRANSFER IT BACK AGAIN.AND IF U WANT TO GET BACK TO ORIGINAL JUST RESTORE THE BACKUP U CREATED EARLIER BEFORE FLASHING NEW ROM.
U CAN CHECK OUT THE THREAD IT MENTION A LOT OF THINGS ABOUT CLOCKWORK AND A2SD AND STUFF http://forum.xda-developers.com/showthread.php?t=1038338
Click to expand...
Click to collapse
Can u tell me what is the difference between both the recovery? Why is clockwork worth it? And does it support CM7?
divyanshu308 said:
i'm sorry to say as that as it did took a lot of time for me to finally got to recovery i cant remember which one i used.
I guess it was the one from android forums . com.
Click to expand...
Click to collapse
just chk the file name u have in ur pc and u will come to know as 1.2.1 will land u in problem later
sweettaniyaa said:
Can u tell me what is the difference between both the recovery? Why is clockwork worth it? And does it support CM7?
Click to expand...
Click to collapse
thunderg recovery is the old preocess of flashing file which sometimes leads to bootloop or unsupportive to some tweaks and add on as it is unable to run the scrip porperly hence clockwork is considered better which handles everything smoothly as it the latest way of flashing zip and files.
But i would suggest to use thunderg as for now as all rom developed here are not suppoting clockwork so once it gets updated u can flash the clockworkmode and yeah finally it does support cm7.
i just hope that clockwork gets some updates like it is in hd2 forum solving some minor issue
Clockworkmod doesnt support many ROMs because the ROMs are using the old Amend scripts. Even google has stopped supporting Amend from Android 1.6.
If you want the old roms to work with clockworkmod, you can use the amed to edify tool to make it compatible with clockworkmod.
rforums said:
Clockworkmod doesnt support many ROMs because the ROMs are using the old Amend scripts. Even google has stopped supporting Amend from Android 1.6.
If you want the old roms to work with clockworkmod, you can use the amed to edify tool to make it compatible with clockworkmod.
Click to expand...
Click to collapse
So r u saying that all the new ROMS will be compatible with Clockworkmod?
just successfully installed custom recovery, can i now delete the img and flash_image from my sd root?, and also the zip file used in flashing new kernel can i delete that as well?
hi i used thunderg recovery 1.1.
i asked a question about how to recovery with 1.2.
basically when i follow the lin k with 1.2 it ends up with recovery image only.
there is no flash iamge attached with it.
so should i use the flash image of 1.1 to do recovery again.?
or what?
anybody here knows the answer ??
divyanshu308 said:
hi i used thunderg recovery 1.1.
i asked a question about how to recovery with 1.2.
basically when i follow the lin k with 1.2 it ends up with recovery image only.
there is no flash iamge attached with it.
so should i use the flash image of 1.1 to do recovery again.?
or what?
anybody here knows the answer ??
Click to expand...
Click to collapse
Yes.you need to use the same flash image file to install v1.2 or v1.2.1.
I suggest that you follow the instructions given in the following thread -
[HOWTO] Rooting, Installing -Android SDK, Custom Recovery, Custom ROM's
http://forum.xda-developers.com/showthread.php?t=1007244
divyanshu308 said:
hi i used thunderg recovery 1.1.
i asked a question about how to recovery with 1.2.
basically when i follow the lin k with 1.2 it ends up with recovery image only.
there is no flash iamge attached with it.
so should i use the flash image of 1.1 to do recovery again.?
or what?
anybody here knows the answer ??
Click to expand...
Click to collapse
just place 1.1 with 1.2 in ur sd card along with the same flash image
http://forum.xda-developers.com/showthread.php?t=1038338
this might help u to use adb properly
Thanks
Sent from my LG-P500 using XDA App
I would like to install the CM7.1 Stable that just came out. I've read the cyanogenmodwiki instructions and the instructions here, but I find both to to be confusing and conflicting with each other. I also watched the mobiletechvideo.com installation youtube.
I am wondering if the following would work.
From JFD Stock 2.1 root the phone and download Rom Manager.
In Rom Manager Flash Vibrant MTD (not Galaxy S Vibrant) Clockworkmod Recovery
Boot into recovery.
Wipe/format and fix permissions
Flash Cyanogenmod 7.1 stable +gapps
Reboot.
I am confused though, in the cmwiki instructions it says to format - but if I format everything won't the cm7.1 zip file on the internal SD also be destroyed?
Thanks in advance.
No, that would be a good method. It will still be on your sd, weeping doesn't format your card. (formatting your card would, different things).
Technically, you could Odin to jfd, take the cm7.1 download and my option b update.zip (noob guide) and that's all you need... Move those 2 to your internal.
Odin
Let it boot
Hold in both volumes + power
At Vibrant screen (booting) release
Now in stock recovery, reinstall packages
Now in cwr, flash 7.1
Reboot
done.
Sent from my SGH-T959V using XDA App
so no need to worry about the whole RFS vs YAFFS conundrum?
What issue? Even the main man himself (atinm) gives you both install methods.. The steps above are tested and work, much faster also. You could be booting 7.1 in under 10 minutes.
Looks like a nightly is already out too. I'd go stable.
http://download.cyanogenmod.com/?device=vibrantmtd
Sent from my SGH-T959V using XDA App
Hi, I tried installing CM7 via the CWM/zip method, which appeared to succeed by actually resulted in a boot loop. Found a couple of messages from people with the same problems but no solution.
So. Does anyone have one of the CM7 ROMs in tar image format?
Timmmmmm said:
Hi, I tried installing CM7 via the CWM/zip method, which appeared to succeed by actually resulted in a boot loop. Found a couple of messages from people with the same problems but no solution.
So. Does anyone have one of the CM7 ROMs in tar image format?
Click to expand...
Click to collapse
You'll find it here:
http://forum.xda-developers.com/showthread.php?t=1151396
This is the direct link to the uploading site, but it's not connecting now.
http://www.multiupload.com/N8VH6IUWOP
That's for CWM recovery, not CM7.
Also, you have heard about megaupload ... haven't you?
Timmmmmm said:
That's for CWM recovery, not CM7.
Also, you have heard about megaupload ... haven't you?
Click to expand...
Click to collapse
Sorry, I'm tired and read it wrong.
But it's worth trying to reflash Clockworkmod. Make sure it's the EXT4 and not the RFS version. I made that mistake before which got my CM7 stuck in a bootloop.
CM7 doesn't come in .tar format. It only comes in .zip format, which can be downloaded here:
http://www.clockworkmod.com/rommana...t.js&name=psyke83&deviceName=Samsung Galaxy 5
Don't forget the Google Apps Package as well:
http://wiki.cyanogenmod.com/index.php?title=Latest_Version/Google_Apps
And the link I gave was multiupload, not megaupload.
Heh, I am also tired! Thanks for the hint...
Timmmmmm said:
Heh, I am also tired! Thanks for the hint...
Click to expand...
Click to collapse
my personal suggestion is to use Odin to flash the CWM recovery (use the 0.5 or 0.7 version, NOT the v0.6 tar files): once booted in the recovery, do the 4 wipes (if you have the phone fully charged; if not don't do the Battery Stats Wipe); usually I also use to format the partitions, you'll find that in the Mounts menu.
Now, always from the Mounts menu, mount the sdcard as USB mass storage and copy here all the files you need to flash: usually a upgrade-****** package, an hotfix and gapps (full or minimal package that's your choice). Unmount from PC and then unmount fro phone.
Now flash normally by Install zip from sdcard and do as always: first the update-***** archive, than the hotfix and finally the gapps ones.
Now reboot and enjoy!
That's my personal how-to, which never makes me falling into a bootloop!
brainvision said:
my personal suggestion is to use Odin to flash the CWM recovery (use the 0.5 or 0.7 version, NOT the v0.6 tar files): once booted in the recovery, do the 4 wipes (if you have the phone fully charged; if not don't do the Battery Stats Wipe); usually I also use to format the partitions, you'll find that in the Mounts menu.
Now, always from the Mounts menu, mount the sdcard as USB mass storage and copy here all the files you need to flash: usually a upgrade-****** package, an hotfix and gapps (full or minimal package that's your choice). Unmount from PC and then unmount fro phone.
Now flash normally by Install zip from sdcard and do as always: first the update-***** archive, than the hotfix and finally the gapps ones.
Now reboot and enjoy!
That's my personal how-to, which never makes me falling into a bootloop!
Click to expand...
Click to collapse
hi brainvision im new to the gti5500 forum but hav been flashing roms on my wildfire for ages, my wife asked me to sort her mob out coz it kept messin up. so i did the dutiful thing and followed status's thread in the dev section and got a bootloop like a few other peeps on that thread but it doesnt seem to be any answer to this problem. i hav also tried installing the official firmware from sammobile but that jst loads the 3 screen then flashes samsung at me foreva. do you hav any suggestions of how i can fix this, im not bothered wot rom goes on as long as the mob is opperational for my wife.
thank you for your time
Did you perform data and cache wipe before flashing CM7 files and gapps package?
The way to install is always the same, so provide me some details or I cannot tell you more than that..
{ brvsn ~ CM7 on GT-I5500 ~ Tapatalk }