Ok friends ...
I tried many solutions but without any luck ...
So ... the problem is:
I have 2 different bt headsets ... one is a bt mono headset (motorola h375) and onother one is a bt stereo headset (SE MW600)
I changed rom because of stability problems (not related to bt): with my previous rom I was able to set all bt settings (sorry for repetition) in the best way for me ... all audio of my LEO was audible through both headsets (music, alert sounds, the instructions of TomTom Navigator and so on), bluetooth commands worked well (start and stop a call, vol up and down, bluetooth voice commands through Cyberon Voice SpeedDial and so on) ...
Now I've done all the same steps with my new rom (a energy rom with dinik's theme) ... all works well with bt with both headsets except one thing ...
When I have an incoming call, the sound of the ringtone is reproduced just in one device: if the ringtone is reproduced by the phone, no ringtone (even the default ringtone of the bt headset I'm using in that moment) is reproduced by the headset ... but when I answer (with the bt headset button) all is normal ... I can hear my caller and He can hear me normally
... instead, if I change some settings (like HideConnection registry key, the "reproduce system sounds ..." setting in the bluetooth menu-->settings-->advanced-->audio ... and so on), when someone call me, I can hear the default ringtone in my bt headset (not depending on which I use ... it happens with both my headsets) but the phone doesn't reproduce its ringtone ... like when it is mute (but it is not)
I've looked in bt settings, in the registry ... but I can't find a way to change this strange behaviour ...
I just want to hear the ringtones in both devices when a call is incoming ... in the LEO speakers and in the headset ...
Just how I did till I changed rom ...
Can someone please tell me how to solve this problem?
also any idea is appreciated
Thanks in advance
Regards
EDIT:
forgotten one thing (I don't know if it is important or not)...
I use (also with my previous rom) audioroute in combination with Cyberon Voice SpeedDial, so I can manage voice commands through the button of my headset (without activating Voice SpeedDial from the LEO)
Regards
Up ...
please help me ...
more than 60 views on this thread ... no ideas?
Thanks
Regards
Related
I have i-mate PDA2k and Plantronics 510 http://www.plantronics.com/north_america/en_US/products/cat1150057/cat5420035/prod5360004 bluetooth headset that is really cool.
The problem is that I can't find any way to make PDA listen to headsets microphone and to play sounds through it :-( When I press and hold the button on the headset I hear <beep> and the icon on PDA changes from headset to something like headset making sound. In the headset I hear very quiet noise. Thats all. All sound are still playing through the PDA and headsets microphone is ignored :-( I also tried Cyberon, Vito Voice2go and Voice dialer - no success with headset.
Is there any way to make it work?
PS Latest official firmware on PDA2k (1.40, not WM5) and latest bluetooth drivers (3900)
Hi,
I use my iMate Startrek with a set of a2dp headphones (the iMuffs), and I have to manually tell the phone to connect to the iMuffs using a2dp through the "Set as wireless stereo" option in the settings, can this be done automatically?
Another thing is that if I get a call while listening to music, the microphone on the headset doesnt work very well, and I have to shout for the person to hear me. I think that the mic in the headset is not being used. Has anybody had this problem and solved it?
Does anyone know if there are some registry settings that need to be tweaked to get these problems solved?
Thanks a lot.
I use an itech s38 and doesn't have a problem with the mic.
I do have problems with automatic connections.
after setting up properly, if the headset gets disconnected,
the next time it reconnects by itself is always on the headset profile
and mostly only connects if i make a call
So even when no indicator is shown I would assume that seconds
before ther call is answered the sound would be transfered to the headset
that's not so much of a problem
what really sickens me is that if i wanted to
listen to music via the headset when headset profile is connected
i would have to
1.hit the stick once to go to comm manager
2.hit "2" to turn off BT
3.exit to make sure action is done
4.hit center to go to comm manager again
5.hit "2" turn it on (making sure it doesn'ty connects to headset profile first)
6.hit Settings to go to BT settings (hit one or enter to getto that's two presses)
4.hit menu
5.hit devices
6.hit menu
7.hit set as wireless stereo
8.hit done
9.hit done again
10.hit exit
11.hit start
12.hit windows media
13.mess another big while in windows media playlists
..........
now that's too much ... many places i could use the home button
to exit quickly .. that's not what's frustating
what i need actually is a shortcut to the BT devices page
and a smarter profile to connect to wireless stereo for me
without having to turn off headset profile first
I am using HP Stereo Bluetooth headset with my QTEK 8500. It works fine besides the reconnection. If I turn the headset off in order to reconnect I have to go to the BT settings and set the headset to Stereo Headset again. I beleive your problem ocurs because your headset is also a handsfree headset, which HP is not.
I do beleive this behaviour is by design. Although I do not seen to understand the logic behind it.
I upgraded my XV-6800 to 6.1 using the Verizon ROM and am having a very annoying issue with Microsoft Voice Command 1.6 (it works somewhat).
The issue is this:
Push button on headset to activate MSVC
***Beep*** through headset
Me: Call Home
Msvc: Call Home? (through headset)
Me: Yes
DIAL TONES THROUGH THE PHONES SPEAKER
Bluetooth headphone switches back on once connected
The only way I have found that it works normally is when I have my Plantronics 8010 main headset piece set to "Wireless Stereo" and "Hands-Free" and I have the little icon of the stereo headsets showing on the top (where the start menu is). If that icon isn't there then the phone goes back to behaving the way it was above.
I've tried this with non-stereo headsets (mono only) and it plays the damn dial tones through the speaker on the phone. The other thing is that instead of the ringtone coming through the headset on an incoming call it goes through the phones speaker- when I hit the headset button it connects the call properly.
Can this be a conflict with that garbage software called Cyberon Voice Dialer? Anyone else have this issue and was there a fix?
Thanks!
I wasn't aware this was a bug. This is how it's always operated for me and I thought it was a purposeful function of the software. Besides, I think that dialing sound would get really annoying in my ear.
EDIT: The ringtones play through my headset, though. It's just the dialing sound that doesn't. What are your Phone settings in MSVC?
Ok- just uninstalled MSVC and re-installed (for the the third time) and now the incoming calls play the headset fine but the dial tones play out of the speaker on the handset.
I'm pretty sure this is a bug as it never used to do this on the XV-6700 running MSVC 1.5.
It's honestly been that way on every version I've personally used. It doesn't seem like a bug to me. It's specifically jumping out of the Bluetooth audio bridge to play it, then back in. That seems deliberate to me. Besides, it's an effect of the phone, itself, doing the dialing. Kind of a psychological thing. Besides, I wouldn't want that annoying sound buzzing in my ear.
I don't know if it exists but...
When I have my bluetooth headset on and my phone is ringing, I can't understand who is calling (if my phone is in my BIG bag)...
Does exist an app for changing tone with a Bluetooth headset connected, that ring in my ear with the name? I mean, like old Nokia metallic voice
Thank you!!!
I don't know whether it will work only when a BT headset is connected, and not at other times, but, there are a lot of apps on the market that can read out the contacts name. (Another missing feature on Android, that was there in all Nokia's...)
https://market.android.com/details?id=ekawas.blogspot.com&feature=related_apps
https://market.android.com/details?id=net.kgmoney.TalkingCallerIDFree
https://market.android.com/details?id=net.kgmoney.TalkingCallerID
https://market.android.com/details?id=com.pwnwithyourphone.voicecallerid
i recently started using a bluetooth headset with my device (non branded from ebay but works great)
the problem is that all the sound is directed through bluetooth. for simple things like dialing a number, it creates the conection and redirect the keynote. the result is having lags when clicking buttons whice produce sound.
i sometimes use the headset to listen to music, but all other times it's just as handsfree (during call)
most of the time i only need the handsfree profile active
my questions are:
is there a way to switch between all media redirection to handsfree only.
can i somehow select which profiles will be active?
using i9100-GT with jellybam 9.2 (CM 10.1.2)
thx