Pegatron today has sent my folio for return at home, i can't wait more.. sound problem was a hardware defect.... i'm very happy!
Good! Hope you didn't sent in your accessories too... because mine is missing when I got the tablet back from Pegatron.
no i've sent only the tablet, luckily.
Related
idk what's happening, but it just started right now, the right earphone works, but the left one doesn't...
I haven't done anything to it either...
Is there any way to fix this?
Okay so i cleaned it in the inside a little bit..
and now the sound is back and it goes away and so on like back and forth in less than a second... wtf is ging on?
Yeah - that happened to me too on the right earbud. Maybe cleaning them helped, but my guess it was coincidence. Mine would randomly start working for a bit, then go out again. I chalked it up to a short somewhere in the wire and scrapped them.
Here's a link where you can get another pair really cheap: http://goo.gl/DRksf
They are pretty cheap buds. Just rock another pair.
Sent from my SGH-T959 using XDA Premium App
yeh did what you guys said, I went out and bought better ones for like 5 dollars more.
Hi there.
Here's what happened so far: Bought my Prime appr. 4 weeks ago, upgraded to ICS out of the box, never rooted. 1.5 weeks ago my tablet started to just switch off several times a day. I had to wait for a few minutes before I could reboot if I didn't plug in the power cord (no, the battery was fine; > 80%). Last weekend my Prime finally gave up and wouldn't even take a charge. I couldn't turn it on, no haptic feedback, no signs of charging (aka dead power LED). The power supply is fine, my dock would charge as it is supposed to do.
I was trying basically everything I could read of, power button for 30 seconds, vol down+pwr button, reset button with a paper clip ... I left it on power supply for two days straight, no charging going on. Essentially, it's a paper weight and I never did anything to it like fishy apps, rooting, modding. Just your regular user.
So I contacted Tech Support today and they told me to have it picked up. I'm waiting for the confirmation mail and a pickup time right now. Will keep you posted, just in case somebody is reading this .
C1OKAS serial, ICS 4.0.3, .11 firmware.
Hi,
if you live in Germany, your Prime is going to be send to Asus Service Center in Czech Republic. I sent my Prime for RMA at 2012/01/09 and still waiting for it to be returned....
Regards,
Pletwal
First update!
My Prime will be picked up tomorrow by UPS and get shipped there:
Wistron InfoComm (Czech), s.r.o.
ASUS Service
K Letisti 1792/1
Slapanice
66451
CZ
Apparently, there's no repair facility in Germany.
Edit: Just saw pletwal's reply. He was right .
Edit 2: My RMA number starts with "CZ". Hint hint?
Same here in DK, they are sent same place.
Mine is also bought from Amazon DE..
bimbobo said:
Same here in DK, they are sent same place.
Mine is also bought from Amazon DE..
Click to expand...
Click to collapse
when did you send yours?
is your Prime already repaired and sent back to you?
Regards,
pletwal
.. I was only replying that also from DK they will send it to CZ.
Mine is not sent yet... waiting for next DE firmware.
This should may improve WiFi/BT issue.. if not it will be sent.
Has anybody RMAed the Prime for WiFi and BT issue, and got it back fixed from Wistron InfoComm repair center?
Hi,... so I got finally a screen replacement (LCD, digitizer and front housing) for under 100 bucks... and replced the screen successful last night:
I had 2 issues immediatly:
- headset jack was not working and Beats sound options showed not available
- Camera app is crashing
I took the phone apart again and put it back togther, checking on the ribbon connectors and making sure all connections are good.
I got the head set working and beats shows now as well, however the camera (both) are still not working. I did not disconnect the cameras from the little motherboard, so they should be just fine
It might be one of the ribbon/ flex cables not plaing well or being damaged.
Does anyone have any other ideas of where to check? Thx
It must be the upper little motherboard/ connectors back to the main motherboard, turns out I also don't have the regular earpiece speaker working... off again go hunting for a broken DNA for little money as parts DNA.
Had this problem as will, but i found the issue.
Try to connect again the cables in both sides of the motherboard.
Sent from my HTC6435LVW using xda premium
incident said:
Had this problem as will, but i found the issue.
Try to connect again the cables in both sides of the motherboard.
Sent from my HTC6435LVW using xda premium
Click to expand...
Click to collapse
Yeah I have tried that twice already. Might look for a broken DNA and see if I can have one for parts...
Sent from my Galaxy Nexus using xda app-developers app
Any solution?
dnargsiefil said:
Yeah I have tried that twice already. Might look for a broken DNA and see if I can have one for parts...
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Hi, I know this thread is pretty old. Were you able to fix the problems ?
Thanks
kgwy
kgwy said:
Hi, I know this thread is pretty old. Were you able to fix the problems ?
Thanks
kgwy
Click to expand...
Click to collapse
I had to replace the cracked glass on my DNA. I bought the glass/screen recommended here (on eBay, seller GadgetFix). Pretty easy to do if you're careful. Tip: Test the phone before putting the back cover on.
Had the same camera crashing issue after replacing the screen. Reseating the cables on both sides of the main board (the ones held by two screws each) a few times to no avail. Then I remembered I had the same issue w/o screen replacement a few months back. Looked up what I did back then, turned out just do a software reset (hold the power button for ~20 seconds) solved the problem. Hope this helps others down the road.
Hello everyone!
My sister accidentally detached the screen of my phone because she was taking it from me. After that, we take it to the repair center (a store only in a mall) and they said that the screen is unavailable for now. The repairman suggested to take out the battery from the phone until the screen is available to order. One day I tried to turn on the phone with its battery inserted to see if it still works without the screen, I thought of the phone was still working fine because it still vibrates when you powered it on and I immediately removed the battery after doing the testing. It almost took 2-3 weeks until the phone was repaired (the screen replacement has no warranty). Then we got home and played with my phone. Suddenly, the touch screen doesn't work, I have waited for a few second then it works again. It keeps happening like that and there are times that the screen completely doesn't respond to my touches until I reboot my phone. The apps that I were using that time are responding well only the touchscreen does not responds well.
I am using a custom ROM while my phone is being repaired.
So here's my question:
Will touchscreen problem exist or occur if you didn't turn it on or use it (powered off) for a few weeks?
The phone that I'm using is Xperia Mini Pro SK17I. I have also tried other custom ROMS like CM10 and CM10.1 but it just makes my touchscreen worse.
Sent from my Xperia Mini Pro using XDA Premium 4 mobile app
Hey there.
What a coincidence, I just went through this kind of problem. Sorry to tell you this, but the screen assembly you bought is defective and there's little you can do about it, save for flashing back to stock and hoping for the best.
I ruined my xmp's screen and had to get a replacement part. I was in a rush so I bought a new display from the first store I came across with. Result: the touch digitizer was deffective, pretty much useless on CM10.1. It worked for a few minutes, but then it stopped responding until the next reboot. Touch response was sloppy, and two-finger gestures were all messed up.
Flashing back to stock ICS helped a bit, but it was far from ideal. I had to cope with it until it finally drove me crazy and I threw it to the ground. The glass shattered, many pieces flew off from the phone. Saved enough money for another screen and I'm just fine with it. No problems even after doing exactly what you described.
Word of advice: get a new screen assembly, and flash back to stock while you're at it.
Would you tell us how much the good assembly costs? Just for reference.
Sent from my MemoPad
I usually buy these from a local store for about $40. Check the display and touch digitizer quality before buying when possible. If you plan on buying one online, don't go for the cheapest alternative you can find, you could end up regretting it.
I'd recommend buying from "formymobile.co.uk"
Some people might not know this, but the display and touch glass on the xmp cannot be separated. This is good and bad at the same time.
Pixelado said:
Hey there.
What a coincidence, I just went through this kind of problem. Sorry to tell you this, but the screen assembly you bought is defective and there's little you can do about it, save for flashing back to stock and hoping for the best.
I ruined my xmp's screen and had to get a replacement part. I was in a rush so I bought a new display from the first store I came across with. Result: the touch digitizer was deffective, pretty much useless on CM10.1. It worked for a few minutes, but then it stopped responding until the next reboot. Touch response was sloppy, and two-finger gestures were all messed up.
Flashing back to stock ICS helped a bit, but it was far from ideal. I had to cope with it until it finally drove me crazy and I threw it to the ground. The glass shattered, many pieces flew off from the phone. Saved enough money for another screen and I'm just fine with it. No problems even after doing exactly what you described.
Word of advice: get a new screen assembly, and flash back to stock while you're at it.
Click to expand...
Click to collapse
I am now dissappointed with myself because I didn't take my phone for repair to the store where I bought my phone. I have already brought my phone there before because of screen replacement too and they replace it with a good and functional one then that store move its location that was far away from us and that takes us to bring the phone in the nearest mall here in our place.
We found a store inside the mall, they fix it and TA-DAAAAA, a phone with a defective screen. And yes, the gestures are not working properly. I really love this phone but I can't take it anymore for another repair.
I am planning to buy a new phone but not a Sony Ericsson phone. I will buy a local branded phone [Cherry Mobile (Android phone) - search it on Google to see it] here in our country (Philippines). It is much cheaper but has a good quality. I am just a student so it will took me a long time to buy a new phone.
Unless my parents decides the buy me a phone because they also use my phone for playing.
Sent from my Xperia Mini Pro using XDA Premium 4 mobile app
fundre said:
Would you tell us how much the good assembly costs? Just for reference.
Sent from my MemoPad
Click to expand...
Click to collapse
The 1st screen replacement that happened to my phone (it was the good one) costs me $77 (based on Philippine Peso to US Dollar)
While the 2nd replacement which is the bad one costs me $55
My country is Philippines.
Sent from my Xperia Mini Pro using XDA Premium 4 mobile app
Hello everyone! Downgrading my phone to Stock Gingerbread does help but it still stops responding (not always) unlike in JB that stops every minute.
Sent from my SK17i using xda app-developers app
Does anyone know where I can get a new power button? Mine was jammed in and cracked slightly. Pretty cool spot build quality right there aswell as the piss poor vibration motor that rattles worse than a Chinese vibrator
Sent from my Phone using Tapatalk
rosswaa said:
Does anyone know where I can get a new power button? Mine was jammed in and cracked slightly. Pretty cool spot build quality right there aswell as the piss poor vibration motor that rattles worse than a Chinese vibrator
Sent from my Phone using Tapatalk
Click to expand...
Click to collapse
I to would like to know this. My power button and fingerprint scanner still work its just that when i press it the press is now soft, where as before the button would make a click sound when pressed.
I'm not sure how a Chinese vibrator sounds, but I'll take your word on that I will say the vibration motor is the worst of any phone I've had.
Why not get it repaired under warranty? It can't be over a year old, yet?
i sent my phone back to razer directly as three uk were absolutely useless, they sent me a brand new replacement and the vibration now sounds great, well not great but it doesnt rattle or sound weird lol
im happy
debranded the damn thing and installed twrp and magisk
rosswaa said:
i sent my phone back to razer directly as three uk were absolutely useless, they sent me a brand new replacement and the vibration now sounds great, well not great but it doesnt rattle or sound weird lol
im happy
debranded the damn thing and installed twrp and magisk
Click to expand...
Click to collapse
I'm in talks with Razer at the moment. Had to go through all the usual crap of resetting the phone and the restoring it. Just to say that nothing worked and it's a hardware issue. How long did it take for you to get a replacement. Did you have to send your device back and then wait for the new one or did they send a courier and do a swap for swap at your house?
Xplicit1992 said:
I'm in talks with Razer at the moment. Had to go through all the usual crap of resetting the phone and the restoring it. Just to say that nothing worked and it's a hardware issue. How long did it take for you to get a replacement. Did you have to send your device back and then wait for the new one or did they send a courier and do a swap for swap at your house?
Click to expand...
Click to collapse
They were really good with it tbh, they sent me FedEx packing slip I just boxed up and picked an pickup date, turn around was about 5 days. Would have been easier to have done a courier swap but I guess they like to check things first