[Q] Going to 2.2.1 from 2.3 - Vibrant Q&A, Help & Troubleshooting

Is this safe to do without odin? Im on Whitehawkx RC1 of the 2.3.2 port.. can i flash to any 2.2.1 rom through rom manager?

dglowen23 said:
Is this safe to do without odin? Im on Whitehawkx RC1 of the 2.3.2 port.. can i flash to any 2.2.1 rom through rom manager?
Click to expand...
Click to collapse
You will have to odin back to stock and check repartition and efs clear.

The 2.3 roms are still a bit buggy and are not complete, if you do not have Moderate to advanced flashing skills, then I would not recommend.

oka1 said:
The 2.3 roms are still a bit buggy and are not complete, if you do not have Moderate to advanced flashing skills, then I would not recommend.
Click to expand...
Click to collapse
He's already on a 2.3 rom and asking whether or not he should flash a 2.2.1 one

nickmcminn60 said:
You will have to odin back to stock and check repartition and efs clear.
Click to expand...
Click to collapse
***************

You have to odin due to the rainbow thing if it wasn't for that damn rainbow I would still be using it, well that and gps
Sent from my SGH-T959 using XDA App

Use rom manager and flash from there you will be on the rainbow screen for a while but just been patient
Sent from my SGH-T959 using XDA Premium App

Related

Bionix fusion 1.1

To run bionix fusion 1.1 do I install bionix rom and the fusion 1.1 kernel? Or is the kernel part of the rom? Or is the kernel the samerthing as the rom?
Sent from my SGH-T959 using Tapatalk
Somebody? Anybody? Team Fusion help a brother out lol dats the only dumb question I have, I promise
Sent from my SGH-T959 using Tapatalk
tayatl said:
Somebody? Anybody? Team Fusion help a brother out lol dats the only dumb question I have, I promise
Sent from my SGH-T959 using Tapatalk
Click to expand...
Click to collapse
If you downloaded it from the team whiskey website, it should come with the kernel designated by the name of the file (Stock, JAC, or KK). If that's the case, you don't have to flash a kernel separately.
All Bionix roms come in kernal flavors....they are built into the roms themselves.
Pick the version you want--BE CAREFUL OF VOODOO--for future flashes you will need to disable it. Don't forget or you will be in a world of hurt to fix it.
Generic112 said:
If you downloaded it from the team whiskey website, it should come with the kernel designated by the name of the file (Stock, JAC, or KK). If that's the case, you don't have to flash a kernel separately.
Click to expand...
Click to collapse
Been wondering this myself. Thank you for clarifying.
Sent from my SGH-T959 using XDA App
Thanks everyone!
Sent from my SGH-T959 using Tapatalk
Getting ready to flash myself but I still have questions in clockwork recovery if I make a nandroid backup does that backup the stock kernel too. Also I have hardware lock fix installed will that be gone after I flash thanks for the help
Sent from my SGH-T959 using XDA App
Beniuec said:
Getting ready to flash myself but I still have questions in clockwork recovery if I make a nandroid backup does that backup the stock kernel too. Also I have hardware lock fix installed will that be gone after I flash thanks for the help
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
I have been told that yes, the nandroid backup will backup the kernel as well. My wife's vibrant has the hardware lock fix and it didn't overwrite it when I flashed Bionix 1.9.1 so I would assume you won't lose the fix either, just try to get into recovery or download mode via hardware after the flash to see if it stuck.

[Q] Stock 2.2 to Bionix V

Stupid question, but I'll ask it anyway...I'm running stock 2.2 but I want to go to the new Team Whiskey Bionix V...do I need to ODIN back to 2.1 and then root to do that, or can I flash the ROM from stock 2.2?
Here are the steps I followed after receiving the official 2.2 update via Kies:
Gain root access here:
Full Steps to Acheive Root + ClockwordMod Recovery with new KA6 2.2
Then install the latest Bionix through ClockwordMod Recovery like any of their previous roms.
Hope this helps!
I just flashed from Peppercake using CWM
schwiz said:
I just flashed from Peppercake using CWM
Click to expand...
Click to collapse
What in God's name does this have to do with the OP's question?
schwiz said:
I just flashed from Peppercake using CWM
Click to expand...
Click to collapse
He means that you dont gave to go back to stock to flash bionix v.
Sent from my SGH-T959 using XDA App
spiz516 said:
What in God's name does this have to do with the OP's question?
Click to expand...
Click to collapse
Haha! The straight answer is YES YOU CAN GO TO BIONIX WITH STOCK 2.2 ONCE YOU SUCCESSFULLY HAVE CLOCKWORK
^^^ see that? cruise control for cool
Im on stcok 2.2 froyo update from kies. flashed supercurios ka6 w voodoo kernel.
disabled voodoo to flash bionix v
tried flashing through cwm
was going fine for like 2 min then ABORTED on its own...
HELPP PLEASE..
What do you mean aborted? Can you provide the actual message?
It actually said "flash aborted" and stayed on red cwm screen
Sent from my SGH-T959 using XDA Premium App
younglzz said:
It actually said "flash aborted" and stayed on red cwm screen
Sent from my SGH-T959 using XDA Premium App
Click to expand...
Click to collapse
I'd try redownloading the zip.
Worst case scenario, I'd Odin flash to JFD (I always repartition...not sure if it's necessary or not) and install CWM/Bionix from there.
Sent from my SGH-T959 using XDA Premium App
inconceeeivable said:
I'd try redownloading the zip.
Worst case scenario, I'd Odin flash to JFD (I always repartition...not sure if it's necessary or not) and install CWM/Bionix from there.
Sent from my SGH-T959 using XDA Premium App
Click to expand...
Click to collapse
okay exact message
e: cant chown/mod/system/xbin/su
no such file or directory
e: failure at line 84
installation aborted

[Q] Advice on switch between custom ROM

As of right now I'm running a Axura 2.2.something and i want to move on to Bionix official 2.2. My question is should I odin back to stock then move to bionix or can i just flash to Bionix
Help is appreciated
Xaphino said:
As of right now I'm running a Axura 2.2.something and i want to move on to Bionix official 2.2. My question is should I odin back to stock then move to bionix or can i just flash to Bionix
Help is appreciated
Click to expand...
Click to collapse
You can just flash. Do a data wipe, the op for the rom tells you all the instructions
Sent from my SGH-T959 using XDA App
but best beat u can do is yes wipe with stock and odin, format sd, and reflash with w.e your choice is, my 0.5$
I used rom manager and I just flashed bionix from axura. It is running well and a lot better than I expected
Sent from my SGH-T959 using XDA App
xdeified said:
I used rom manager and I just flashed bionix from axura. It is running well and a lot better than I expected
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
The general consensus is that Bionix V flashes well on top of other roms. Official TeamWhiskey forums say that you do not need to disable voodoo if coming from one of their previous roms, but you may want to disable it if you're coming from Axura or the like just to be safe.

flashing anything removes baseband and signal

the other day i DL and flashed CM7 trigger redux. i love everything about it except the stock kernal. when i first flashed the rom everything i flashed after that would take away my baseband and my signal completely, rendering my phone useless unless i connected to a wifi. i then managed to get a kb5 modem for cm7.1, which worked just fine. however i still cannot get a kernal on my phone. i took the cm7 kernals for 2.3.4, including platypus and the nightlys [they are all located in the bible]
im guessing since the 7.1 modem flashed just fine, i need to find a kernal for cm7.1?
are there any in circulation atm? or would the cm website be the best place for these kernals?
i apologize for the noob questions, but i am new to 2.3
go back to stock and reflash
movieaddict said:
go back to stock and reflash
Click to expand...
Click to collapse
But the kernals I am flashing are compatible with my rom right?
Sent from my SGH-T959 using XDA App
Ok, so odin'd back to stock, reflashed, even tried a diff cm7 version. Still no success...wtf?
Sent from my SGH-T959 using XDA App
what kernel are you flashing?
look for an updated version of the kernel.
If there is not one, don't flash the kernel.
scrizz said:
look for an updated version of the kernel.
If there is not one, don't flash the kernel.
Click to expand...
Click to collapse
I'm on version 2.3.4 I figured I could flash a kernel updated to that version via the bible. Or is cm7.1 something completely different?
Sent from my SGH-T959 using XDA App
Have you checked your imei #?Go to "about phone "setting.Sometimes it says null with a bad flash. Odin back to 2.1 eclair if so.It happened to me once ..
Dougfresh said:
Have you checked your imei #?Go to "about phone "setting.Sometimes it says null with a bad flash. Odin back to 2.1 eclair if so.It happened to me once ..
Click to expand...
Click to collapse
Yeah my imei number is there. This is crazy, I've never had any problems flashing anything before. Its like my phone won't let me flash any other kernel, but the one that comes with cm7. I can flash cm7.1 modems just fine though
Sent from my SGH-T959 using XDA App
david_rowe said:
Yeah my imei number is there. This is crazy, I've never had any problems flashing anything before. Its like my phone won't let me flash any other kernel, but the one that comes with cm7. I can flash cm7.1 modems just fine though
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Google "vibrant glitch" and get v11. (Make sure you get the vibrant one and not any of the other versions)
Sent from my SGH-T959 using XDA App
geoffcorey said:
Google "vibrant glitch" and get v11. (Make sure you get the vibrant one and not any of the other versions)
Click to expand...
Click to collapse
How the hell did you know that kernal was going to work? What makes this kernal different then the others I tried?
Sent from my SGH-T959 using XDA App
david_rowe said:
How the hell did you know that kernal was going to work? What makes this kernal different then the others I tried?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
There are 3 kernels right now for the vibrant updated enough to work with the latest nightlies. But only glitch and kernel de jour have been updated, and personally glitch seems to be better (plus, I'm running glitch v11 right now and have been following that thread).
I'm pretty sure all the CM7 kernel links in the bible are too old and therefore,you lose your baseband.
Sent from my SGH-T959 using XDA App
Thank you geoff!!!!
Sent from my SGH-T959 using XDA App

[Q] CM7 to Stock 2.2

After much thought regarding the 911 issue with CM7, I have decided to downgrade back to 2.2. Although 2.2 is outdated, it has a better GPS, battery life, and working 911.
What I want to know is how can I wipe everything before downgrading back to stock? This includes all music and various files left around by me throughout the years. I also want to know what the best kernel for 2.2 is in terms of battery life or should I leave it as stock?
Sent from my SGH-T959 using XDA App
format internal and external sd card under mounts and storage in recovery. Bali kernel
Sent from my T959 using XDA App
I don't think formatting will work because the recovery is updated and trying to install and older 2.2 ROM will complain about broken scripts in CWM. You may have to Odin back if I I'm not mistaken.
Sent from my T959 using XDA App
sorry, and not just my opinion, when you start over start clean and odin to stock, 'ghost in the machine', its real
RensoreK said:
I don't think formatting will work because the recovery is updated and trying to install and older 2.2 ROM will complain about broken scripts in CWM. You may have to Odin back if I I'm not mistaken.
Sent from my T959 using XDA App
Click to expand...
Click to collapse
Since the op said
What I want to know is how can I wipe everything before downgrading back to stock
Click to expand...
Click to collapse
I assumed he was planning to odin
Yep thanks for the help guys. Now I'm on the process of getting Bali on here as a kernel but I don't know which one to pick. The reguler release or the UV or undervolt release.
Sent from my SGH-T959 using XDA App

Categories

Resources