I was wondering if anybody could help me. My phone is stuck in bootloader mode. it starts up in bootloader no matter what i do. I have tried task29, flashing original rom, flashing other roms, and from SD-card. the result is allways the same. What pussles me is that when i try to flash, it all looks normal, i get it up to 100%, and when it restarts it just goes right to bootloader mode. Tried to put Leoimg.nbh to Sd-card, and the bootloader glitches for a secoud saying loading, but then it goes straigth back to the bootloader again.
If anybody got any advice it would be grately appriciated.
I am using Hspl 2.08
Might there bi a chip or something that is broken?
The radio ROM might be corrupted
Try flashing a new radio ROM, it should fix your problem.
If you trying to flash android to your phone hspl 2.08 is the right one, but your need a Radio rom that support 576MB trick.
But you said that you flashed the original (Newest) rom, then you need the right spl to run 3.14ROM, it needs to be 3.03.xxxx for 3.14 and you have 2.08.xxxx
Run hspl4 choose 3.03.0000 or 3.03.Hspl and reboot.
G
kmaarud said:
I was wondering if anybody could help me. My phone is stuck in bootloader mode. it starts up in bootloader no matter what i do. I have tried task29, flashing original rom, flashing other roms, and from SD-card. the result is allways the same. What pussles me is that when i try to flash, it all looks normal, i get it up to 100%, and when it restarts it just goes right to bootloader mode. Tried to put Leoimg.nbh to Sd-card, and the bootloader glitches for a secoud saying loading, but then it goes straigth back to the bootloader again.
If anybody got any advice it would be grately appriciated.
I am using Hspl 2.08
Might there bi a chip or something that is broken?
Click to expand...
Click to collapse
The 3.03.0000 SPL or 3.03 HSPL has nothing to do with your problem I promise you.Tthe only reason you would need that SPL or HSPL version is to fool your HD2 into thinking it has the same amount of RAM as the TMOUS model of the HD2. The 3.14 ROM will still flash with the 2.08 HSPL you have.
It sounds like your volume down button might be stuck down as the volume down button has to be pressed down during boot up to get to the bootloader. So check your volume down button and see if if is stuck in the down position. If so this is your problem and I suggest flashing the stock ROM for your HD2 via SD card. This will put you back to complete stock and you will be good to send your HD2 in for warranty repair or exchange.
Related
Just did the titan unlocker and now the p4000 is stuck in bootloader with these 2 lines:
TITA100
SPL-1.20.Olipro
i think i need some help
thanks in advance
Marc
edit:
RUU_TITAN_SPRINT_WWE_3.56.651.0_RS_3.42.02_SPCS2.0 4_PPST_0619_Ship.exe >>> would flashing this ROM and Radio save me or my titan?
orangeworx said:
edit:
RUU_TITAN_SPRINT_WWE_3.56.651.0_RS_3.42.02_SPCS2.0 4_PPST_0619_Ship.exe >>> would flashing this ROM and Radio save me or my titan?
Click to expand...
Click to collapse
yes..............
since i'm stuck in bootloader mode, how can i use the ruu update utility ?
i'm getting connectiong failed and only option is to exit utility
any ideas ?
if u are in bootloader connect the usb cable and the phone should say usb at the bottom, just open up the ruu update and it should work just fine
Error 264
update utility cannot connect to your pda
and it says USB on the bootloader screen
SPL is 1.20 olipro
take your SD card out if (with phone powered off) if u have an image on the SD card and retry
no SD card being used at the moment
edit: it seems now it is flashing...
let's say this does work, fact that i'm putting a sprint ROM on my telus phone is gonna be alright?
re-edit: crashed at 11% - invalid command error 290... RUU encountered a communication error
recovery
at 11%, titan reset and went back into bootloader mode, RUU crashed but gave option for recovery which was "successful"
retried the same RUU_TITAN_SPRINT_WWE_3.56.651.0_RS_3.42.02_SPCS2.04_PPST_0619_Ship.exe
and crashed again at 11%
i think i killed my phone
i can't seem to do anything, not the telus wm6.0 ruu nor the one stated earlier...
is there a way i can revert to my previous SPL 1.04 ?
really appreciate the help @ 5:35 AM
got my telus wm6 to run and then decided to up to olipro 2.40
now it won't got past second splash...
radio is 1.32, rom is dcd 3.2.5
now from my understanding of what i've been reading is that i need to revert to olipro 1.20 to be able to flash my radio
and i can't do that since i can't get activesync.
any ideas ?
Get a SD card. Go to WIKI and following reverting to Stock. Then start over on flashing. I have done as you did and fixed the phone.
your phone sounds jacked up, how long is it stalling at 11%, r u giving it decent enough time?
redownload the latest sprint rom from htc america here:
http://216.139.227.226/RUU_TITAN_SPRINT_WWE_3.56.651.0_RS_TITAN_3.42.02_SPCS2.04_PPST_0718_Ship.exe
let it run for at least 20 minutes before deciding it crashed...after 1st boot softreset before letting it run any customizations
Got a problem. I wanted to upgrade to new OzRom today so did normal tasks I did last 40 times.
get new rom and unpack it.
Rename image to LEOIMG.nbh and put it to root of SD card
perform mtty task 29
reboot, phone goes to bootloader then goes to normal grey screen it just says loading and that is it. It gets stuck there.
I had tried flashing via sspl, it sees the phone, screen on phone changes to black htc screen but loading bar sticks at 0%
I have HSPL 2.08 on the phone, I tried to re apply HSPL but it states error with usb connection. Can not upgrade radio from sd card or via sspl as well.
Did try previous rom that worked but it also does not want to load?
Any ideas?
Try flashing back to your original rom. Try that via sd card which should replace hspl back too your stock spl and then start the process from scratch.
mitty task 29 has a serious problem. you are not the only one. if ur hd2 is from tmobile. try T-Mobile_HD2_MR_Software_2.13.531.1. flash it just like the way you do. if doesnt work then copy it to sd card and flash it. . it'll return to its original stage.
pnjboyzz said:
mitty task 29 has a serious problem. you are not the only one. if ur hd2 is from tmobile. try T-Mobile_HD2_MR_Software_2.13.531.1. flash it just like the way you do. if doesnt work then copy it to sd card and flash it. . it'll return to its original stage.
Click to expand...
Click to collapse
It is odd that it did it now as I have not had any problems for last 8 months
Did not work!!
Update is that I managed to do the HSPL3 again over USB which I could not do before but I can not flash any roms.
Have you tried flash to ActiveSync????
Ok got it going again.
I hade my HSPL as 2.08.0000 and cotula signs all over it. Flashed again and it again went to the same one. However apparently .0000 means it is stock (no idea why stock rom did not want load). Flashed it again to HSPL2 and then upgrade to 3 fixed it.
alesscam said:
Have you tried flash to ActiveSync????
Click to expand...
Click to collapse
It would not help as I have done mtty before so no os on it.
no problem with mtty...
after mtty
you can press red botton for sofreset and press volume down for go to Bootloader
from bootloader you will see USB ,
this if your leo is connect to PC
Hello everyone,i have changed my rom several times,everything was ok but as i run task29,and then when i lunched Miri & Dinik WM6.5.x 23569 v.17.4(2),my HD2 doesn't load and the blank screen that has the htc logo doesn't disappear.i have done every thing that it was said in this site(sd flash and so on,putting leoimg.nbh in the sd card and so on...) but it didn't work!!!
I wonder what should i do now?is it a hardware problem?
moharzani said:
Hello everyone,i have changed my rom several times,everything was ok but as i run task29,and then when i lunched Miri & Dinik WM6.5.x 23569 v.17.4(2),my HD2 doesn't load and the blank screen that has the htc logo doesn't disappear.i have done every thing that it was said in this site(sd flash and so on,putting leoimg.nbh in the sd card and so on...) but it didn't work!!!
I wonder what should i do now?is it a hardware problem?
Click to expand...
Click to collapse
can you manually get into bootloader?
yes,with soft reset and holding the vol down button.
and what does it say next to spl in bootloader?
sorry,it seems that the information that i gave,wasn't so complete to be answered,
it is SPL-1.42.000.
ok, so any spl that ends .0000 is stock so you dont have hspl installed, and so cannot flash custom roms or radios.
This no doubt happened when you tried to flash a stock rom from sd card, because even if the sd flash fails, it will have reset the spl. (Example, say you have an o2 locked phone, you try to flash a tmobile stock rom, from sd card, the first thing it does is remove hspl, and THEN it does the cid check, , finds that its a tmobile rom and an o2 phone so the flash fails, making you think it just failed, nothing more, but in reality it has already flashed the spl removing hspl)
Get hspl2
run it, choose the hspl version you want (1.42.hspl, 1.66.hspl, 2.08.hspl, it doesnt really matter)
pick any rom you want to flash and flash it from usb.
Let us know how you get on.
hey sam,that was great!you made my hd2 back to life.thanks a lot for your help my dear.
i tried many ways to fix it,but the rom update failed all the time.i tried to flash hd2 through micro sd,so i formatted my memory card and then i rename "ruu_signed.nbh" to "LEOIMG.nbh", and i reset hd2 while holding vol down button.then the loading screen appeared, i thought that i solved the prob but i was wrong and the loading screen was still there,i even waited for a hour!!!but nothing changed.the last option was to state my prob here,and i did,and i received a reply from you sam,i dont know how can i thank u,only i can say many thanks and you did me a very big favor!
my pleasure.
as for the favour,, do something nice for someone you don't know next time you get chance.
Hi. I wanted to install Android on my HD2 but for that I need radio versions 2.08 - 2.12. And currently my radio version is 2.06 so I wanted to flash it to 2.10 or one of them between 2.08-2.12. For this I used Custom RUU. Everything went well untill it said installing, and it went to 4% and then suddenly my phone reboots and then on my computer it says "Error 270. The image file is corrupted. Please check your Update Utility."
Well what have I done wrong?
Nilee said:
Hi. I wanted to install Android on my HD2 but for that I need radio versions 2.08 - 2.12. And currently my radio version is 2.06 so I wanted to flash it to 2.10 or one of them between 2.08-2.12. For this I used Custom RUU. Everything went well untill it said installing, and it went to 4% and then suddenly my phone reboots and then on my computer it says "Error 270. The image file is corrupted. Please check your Update Utility."
Well what have I done wrong?
Click to expand...
Click to collapse
Did you have install HSPL on your device?
Yes I have installed HSPL. But if you have installed HSPL, is it then supposed to show "HSPL" somehere on the bootloader screen? Because on mine it doesn't.
But then that's weird because I did install HSPL and it even said succesfull. But still I get the same error when I try to flash the radio.
Go into bootloader by holding the VOL- (down) button, while pressing the End Call button to boot up your phone from being all the way turned off.
Check on your bootloader (tri-color) screen for the letters HSPL and the name Cotulla.
If these things are not present, then for some reason you don't have HSPL installed.
If this is the case, stay in bootloader, and re-run HSPL, and then check again in your bootloader to make sure you have HSPL, and then re-flash the custom_ruu
Chances are it just didn't take because your phone didn't have HSPL for whatever reason. You might want to re-download the radio ROM just to be sure you didn't get a corrupted/incomplete download.
Good luck
oops ignore plz
but what a shame that my pc even doesnt play with custom ruu.nothitng happen when i click.i have everything installed.
huggs said:
Go into bootloader by holding the VOL- (down) button, while pressing the End Call button to boot up your phone from being all the way turned off.
Check on your bootloader (tri-color) screen for the letters HSPL and the name Cotulla.
If these things are not present, then for some reason you don't have HSPL installed.
If this is the case, stay in bootloader, and re-run HSPL, and then check again in your bootloader to make sure you have HSPL, and then re-flash the custom_ruu
Chances are it just didn't take because your phone didn't have HSPL for whatever reason. You might want to re-download the radio ROM just to be sure you didn't get a corrupted/incomplete download.
Good luck
Click to expand...
Click to collapse
Ok, then my HSPL isn't installed. But that's real' weird. Because when I install HSPL everything goes okay and it even says "Succesful" etc. I've tried to install HSPL for like 4 times and it always says installation completed, but however it doesn't show anything like HSPL or Cotulla on the bootloader screen. And I do have SPL 1.42.0000, which is required to install HSPL. And I also disabled my anti-virus so what have I done wrong?
By the way: When I go to bootloader mode it always goes to a grey screen first with blue words "Loading" and after a few seconds it says "Not allow" and after that it finally goes to bootloader mode. Is it supposed to be like that or what's wrong with this?
Nilee said:
But then that's weird because I did install HSPL and it even said succesfull. But still I get the same error when I try to flash the radio.
Click to expand...
Click to collapse
did you use hspl3 and not changing the dropdown from its default 2.08.0000 which is stock. run it again and make sure the dropdown ends .hspl
saurabh88 said:
but what a shame that my pc even doesnt play with custom ruu.nothitng happen when i click.i have everything installed.
Click to expand...
Click to collapse
anti virus program give you a hit when you first downloaded it?
many times the file gets disabled so you need to download it again, even if you turned off the av or told it to allow customruu.
also right click and "run as administrator" even if you are logged in as admin.
Nilee said:
By the way: When I go to bootloader mode it always goes to a grey screen first with blue words "Loading" and after a few seconds it says "Not allow" and after that it finally goes to bootloader mode. Is it supposed to be like that or what's wrong with this?
Click to expand...
Click to collapse
there's a leoimg on your sd card (or your phone thinks there is) but it isn't starting. remove the card.
Ok, well I used HSPL 2 and it installed correctly. HSPL 1 however didn't work for me. After I installed HSPL 2 it clearly said something like HSPL 2.08 on the bootloader screen. So I tried to flash to a new radio with CustomRUU. It all went well, untill it was installing and suddenly said: CONNECTION ERROR CRITICAL ERROR or something like that. It also said that the USB cradle or something was unconnected, however it was still connected and I didn't even touch it. After that my phone rebooted and went into bootloader mode again. The weird thing is that it doesn't say HSPL 2.08 anymore. Now t says SPL 1.42 again so the HSPL went away or something. I tried to reboot the phone (using the red button at the back of the phone) but it went into bootloader mode again. Well, all it does is go into bootloader mode. I can't even get to the normal thing again, only the bootloader mode. What the hell have I done wrong?
By the way: If I'm in bootloader mode all it says is this:
HX-BC
SPL-1.42.0000 XE <-- (before this it still had HSPL but now it went away)
MicroP-Wrong Platform (0x0)
MicroP(TOUCH) 0x30
Can anyone help me? Have I bricked my phone??
Just a question/suggestion,
Did you already thought to use/install the latest stock ROM 3.14 !?
the reason of this suggestion is this stock ROM have Radio 2.15.50 already integrated (no need of HSPL) and it's compatible with Android.
Well I didn't, I will try to do it. But I don't know how. Because my phone is still only able to get into bootloader mode. And it won't even charge it's battery..
So do I have to put the Stock ROM on my SD now, and flash it from the SD card?
I don't even know how much battery my phone still has..
Nilee said:
Well I didn't, I will try to do it. But I don't know how. Because my phone is still only able to get into bootloader mode. And it won't even charge it's battery..
So do I have to put the Custom ROM on my SD now, and flash it from the SD card?
I don't even know how much battery my phone still has..
Click to expand...
Click to collapse
You can flash stock ROM when you are in bootloader mode.
kurt-willems said:
You can flash stock ROM when you are in bootloader mode.
Click to expand...
Click to collapse
How?
By the way, my phone is in bootloader mode but it won't connect to the computer using a USB cable, it also won't charge it's battery.
Nilee said:
How?
By the way, my phone is in bootloader mode but it won't connect to the computer using a USB cable, it also won't charge it's battery.
Click to expand...
Click to collapse
Ok, then rest you the flashing over SD.
Make attention to use the right stock ROM; use your S/N to get access at your stock ROM on the HTC webpage.
deleted please ignore
Ok so I just extract the .exe and take the .nbh file of it and rename it to leoimg.nbh and put it on SD and start flashing?
Nilee said:
Ok so I just extract the .exe and take the .nbh file of it and rename it to leoimg.nbh and put it on SD and start flashing?
Click to expand...
Click to collapse
Yes; that"s it.
Hi
I have a flashed HD2 with these problems.
In Bootloader it says
PB81100 SS-BC
SPL-208.HSPL 8G XE
0X05​CotullaHSPL 0X50
If I try to install HTC RUU_Leo_S_HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe it breaks after 1% it says 270 error
HD2 reboots and again white Screen. When I put off/on battery and press Volume down I see bootloader display.
I tried to flash with sd Card, leoimg.nbh on the sdcard breakes after 10%
it says
00018003
LEOIMG.nbh -FAIL
Radio-Fail
I think I have a bootloader problem. How can I remove SPL-2.08.HSPL 8G XE and set the new orginal SPL ?
here bepe says :
4) Uninstallation
Only way to remove the HSPL is to flash an original SPL from SD card.
- Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh"
- Reset the device while pressing the volume down button.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=611433
I made it with HTC
RUU_Leo_S_HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
but I can't remove HSPL from my bootloader.
How can I set my bootloader back to original htc ?
the topic can be closed
this has solved my problem
http://forum.xda-developers.com/showthread.php?p=24876999#post24876999
I had installd Windows 6.5 everthing was working perfect, then I tried to install Android and clk mod now I get the same in the 1. Posting from me.
I have SPL-3.03 HSPL in the boatloader but I get allways Error 270 I can't uninstall 3.03 HSPL
does anybody have an Idea?
Radio_2.15.50.14.nbh installation fails, but custom rom like energy sucesses. After that again white screen
nobody knows the solution?
You have a stuck radio. Fairly common, with a variety of symptoms. The radio wont let itself be changed which is why custom roms and splashscreens don't have a problem.(radio gets flashed at the start of flashing which is why it always fails around 8-10%) This issue can affect spl to a greater or lesser degree, some people can change spl some can't, some find flashing an older (but correct for that phones cid and region) stock rom, some find chilling the phone allows the flash to take allowing the radio to finally change, some never get anything to flash again.
hi
thank you for your answer. My Bootloader shows
SPL-3.03.HSPL XE
0X05
0X50
if I try to run Task29 via USB Cable, I get Error 270, it breaks sometimes at 16%
reflash 3.03 HSPL with HSPL 4 says it is successfull, but if I try to flash a rom with usb again it shows 270 Error, so my logical deduction is, reflash with HSPL4 does not really flash and it gives wrong answer because others like task28 leo customRUU can't flash over usb cable. HSPL 4 says success but this answer must be fake, after reboot 3.03HSPL remains in the bootloader, I tried to downgrade to 2.08HSPL no chance,
My System is Windows XP SP3 when I connect USB Cable to my HD2 it shows USB in the bootloader but why does it break if I try to flash over USB Cable and give an error 270 ? there must be a connection problem between my laptop and HD2.
I would like to know
Is there any way to flash HSPL4 over microSD card?
Can I see which Radio Rom has been installed ?
its a bit strange
Radio Rom Radio_2.15.50.14 istallation via USB Cable fails after 4%
and via microSD Card ~96-99%
I get
00018003
what can be the reason?
ParmakSokan said:
what can be the reason?
Click to expand...
Click to collapse
as i said,. you have a radio image that isnt allowing itself to be overwritten. My name for it is 'stuck radio' and some people fgind the radio still works fine with, for example, custom roms, it just cant be changed, others find the phone always hangs on grey bootscreen, yet more find taht hspol/spl flashes seem to work but nothing changes, some find chilling it in teh freezer lets a rom flash and suddenly all is well, and yet more find the freezer trick seems to work but doesnt, and yet more try and try and try to sd card flash with their CORRECT stock rom and suddenly without warning teh flash works.
My advcie, Prepare yourself for disappointment, but keep trying,and most importantly READING there are hundreds of threads about this.
mobile radio
ParmakSokan said:
nobody knows the solution?
Click to expand...
Click to collapse
hey gys whats this radio in mobiles... have searched and searched but no ans.....