installed 1.1 correctly, everything worked find, upgraded to 1.2 everything went smoothyly except when i try to install any app from the market i get an error "The application Market (process com.android.vending) has stopped unexpectedly. Please try again."
Any help would be greatly appreciated.
Thank You
Try to clear cache under applications for the market. But you should ask this at the rom thread....
Sent from my ADR6400L using Tapatalk
Flashed this rom (and kernel) and now I am not able to get past the TBolt boot screen with the thunder. Hung there for over 2 mins.
-I flashed the kernel with hboot
-installed the ROM with CWR (rom manager) 3.0.2.4
-also cleared the download cache in Rom Manager, deleted and reflashed the recovery.
Still hangs...
ajftl said:
Try to clear cache under applications for the market. But you should ask this at the rom thread....
Sent from my ADR6400L using Tapatalk
Click to expand...
Click to collapse
3 more posts and I can ask there
Awisefew said:
Flashed this rom (and kernel) and now I am not able to get past the TBolt boot screen with the thunder. Hung there for over 2 mins.
-I flashed the kernel with hboot
-installed the ROM with CWR (rom manager) 3.0.2.4
-also cleared the download cache in Rom Manager, deleted and reflashed the recovery.
Still hangs...
Click to expand...
Click to collapse
usually best practice is, wipe data X2, wipe cache X2, wipe dalvik cache X2, then flash the rom, fully boot the rom, go back to Hboot and flash the kernal.
I believe they are saying to NOT wipe 1.1 for this ROM? I could be wrong. I think they said to just flash OVER the current 1.1, as wiping will cause it to hang on the cloud screen. I think that's the lastest from that 30+ page thread .
Fix permissions on cwr.
Sent from my ADR6400L using Tapatalk
Reflash ROM and wipe your data and cache. Had the same problem, and that worked for me.
sygnous said:
I believe they are saying to NOT wipe 1.1 for this ROM? I could be wrong. I think they said to just flash OVER the current 1.1, as wiping will cause it to hang on the cloud screen. I think that's the lastest from that 30+ page thread .
Click to expand...
Click to collapse
You are correct.
Yes did get all that in the end I've reflashed my
Nandroid backup back was going to stat all over, now for some reason I've lost root. Any ideas
Sent from my ADR6400L using XDA Premium App
happimeal said:
Yes did get all that in the end I've reflashed my
Nandroid backup back was going to stat all over, now for some reason I've lost root. Any ideas
Sent from my ADR6400L using XDA Premium App
Click to expand...
Click to collapse
what do you mean you lost root... hboot no longer shows S-Off?
and my bad, I didn't know their second version of the rom was all weird and needed to be flashed over the original.
Hmm just checked hoot still shows s_off but root checker says Su not found in path. Also still getting that weird market error when I try to install anything. It downloads just won't install.
Sent from my ADR6400L using XDA Premium App
you have to have version 1.1 installed first. So you need to wipe data and cache. Flash version 1.1 and reboot. Let it get past the clouds and boot into the rom. go back into cwm and flash 1.2. DO NOT WIPE DATA!!! Wiping cache is fine. If you wipe data you will have problems.
Related
Posted in the BAMF dev thread, but it got lost in the deluge.
was using Airborne senseless.
Wiped cache & dalvik twice, installed BAMF from recovery. No notification bar. Switched between launcherPro, ADW, and the stock launcher, still missing.
Wiped thrice, recovered Airborne, then repeated the above install.
Still missing. Any ideas?
.eschew obfuscation.
Try wiping data???
Did u install the new radio?
Sent from my ADR6400L using XDA Premium App
superchilpil said:
Try wiping data???
Did u install the new radio?
Sent from my ADR6400L using XDA Premium App
Click to expand...
Click to collapse
I did install the required GB radio adrynalyne posted. 3g, LTE, everything works fine.
Are you suggesting a factory reset?
.eschew obfuscation.
didda said:
I did install the required GB radio adrynalyne posted. 3g, LTE, everything works fine.
Are you suggesting a factory reset?
.eschew obfuscation.
Click to expand...
Click to collapse
It's because you are only wiping cache & davlik and not data. It states right in the OP what to do.
I also recommend a data wipe with this version. If coming from Froyo, its REQUIRED.
Click to expand...
Click to collapse
EDIT: why are you installing airborne and then installing BAMF overtop of that?
didda said:
Posted in the BAMF dev thread, but it got lost in the deluge.
was using Airborne senseless.
Wiped cache & dalvik twice, installed BAMF from recovery. No notification bar. Switched between launcherPro, ADW, and the stock launcher, still missing.
Wiped thrice, recovered Airborne, then repeated the above install.
Still missing. Any ideas?
.eschew obfuscation.
Click to expand...
Click to collapse
This happened to me the first time I tried this ROM. I fixed it by re-downloading the ROM and installing through recovery nor ROM Manager and doing a factory reset before rebooting.
I guess I misunderstood. I'd flashed other ROMs without wiping data, and never had an issue. I just thought OP meant cache/dalvik. I didn't realize wiping data was a separate thing. I guess I got away with just cache/dalvik wipes, until going from Froyo to GB. I see now where I messed up.
I didn't flash on top of airborne, I restored a backup to get to "zero" then tried the bamf install again.
Thanks for cluing me in!
.eschew obfuscation.
didda said:
I guess I misunderstood. I'd flashed other ROMs without wiping data, and never had an issue. I just thought OP meant cache/dalvik. I didn't realize wiping data was a separate thing. I guess I got away with just cache/dalvik wipes, until going from Froyo to GB. I see now where I messed up.
I didn't flash on top of airborne, I restored a backup to get to "zero" then tried the bamf install again.
Thanks for cluing me in!
.eschew obfuscation.
Click to expand...
Click to collapse
You don't restore a backup and then flash a rom. Wipe everything, then install the rom. Restoring a backup and then flashing any rom over top of that will most likely give you problems.
g00s3y said:
You don't restore a backup and then flash a rom. Wipe everything, then install the rom. Restoring a backup and then flashing any rom over top of that will most likely give you problems.
Click to expand...
Click to collapse
Thanks for your help and patience!
Ok. I unlocked my phone using the HTC method. Flashed a working recovery. Flashed synergy ROM and everything went smoothly. Now when I tried to flash miui and steel ROM, I can't get past the lockscreen. Can someone help?
Sent from my PG86100 using XDA App
bleichtman said:
Ok. I unlocked my phone using the HTC method. Flashed a working recovery. Flashed synergy ROM and everything went smoothly. Now when I tried to flash miui and steel ROM, I can't get past the lockscreen. Can someone help?
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
Problems occur sometimes when something is missed when delating i.e deleting cache, dalvik cache or factory reset etc is missed. Did you do all?
Also i once had a problem because i was using a download manager and partially paused the download. When i switched my laptop back on to resume the download ...it did resume and it did download the entire ROM but somewhere something got corrupted and i couldn't get past the boot screen.
Above is just my personal opinion. No harm in trying to re download a new ROM.
elevation_2 said:
Problems occur sometimes when something is missed when delating i.e deleting cache, dalvik cache or factory reset etc is missed. Did you do all?
Also i once had a problem because i was using a download manager and partially paused the download. When i switched my laptop back on to resume the download ...it did resume and it did download the entire ROM but somewhere something got corrupted and i couldn't get past the boot screen.
Above is just my personal opinion. No harm in trying to re download a new ROM.
Click to expand...
Click to collapse
I actually redownliaded, wiped numerous times. Tried infected and that worked. Could the kernel be a reason?
Sent from my PG86100 using XDA App
I just tried to install the latest viper redline rom, but after i did it just keeps rebooting. I am rooted using revolutionary, i used the steps from the site but just can't get to to not reboot, can someone please help me out. also android version is 2.3.4 if that helps when giving a solution to my problem. thanks in advance.
What steps did you take in installing the ROM? Did you make sure to do a full wipe?
Steps to take:
-Make sure that you wipe correctly. With a new ROM you should be wiping Data, Cache, Dalvik Cache, System, and Boot.
-If you're able to actually boot it but it resets afterwards, did you flash a kernel or overclock? Undo those types of things.
-If it boots, try backing up all of your apps and then uninstalling them to see if one of them is the culprit.
So it comes down to:
IF IT DOESN'T BOOT:
-check to see if you got a bad download (redownload or check MD5)
-full wipe
-install
IF IT BOOTS:
-could be an app issue, overclocking, kernel, etc
See what that gives you.
Sent from my HTC Evo 3D using XDA Premium App
SoraX64 said:
What steps did you take in installing the ROM? Did you make sure to do a full wipe?
Steps to take:
-Make sure that you wipe correctly. With a new ROM you should be wiping Data, Cache, Dalvik Cache, System, and Boot.
-If you're able to actually boot it but it resets afterwards, did you flash a kernel or overclock? Undo those types of things.
-If it boots, try backing up all of your apps and then uninstalling them to see if one of them is the culprit.
So it comes down to:
IF IT DOESN'T BOOT:
-check to see if you got a bad download (redownload or check MD5)
-full wipe
-install
IF IT BOOTS:
-could be an app issue, overclocking, kernel, etc
See what that gives you.
Sent from my HTC Evo 3D using XDA Premium App
Click to expand...
Click to collapse
i wiped the cache and data that was it. don't know how to wipe dalvic cache or system can you either tell me or give a link to the step by step guide. i didn't overclock or put a different kernel on the phone.i did redownload the rom to make sure it wasn't the rom. All it does is show the viper across the screen then reboots show the htc on the white screen then reboots again.
What recovery do you use?
Sent from my HTC Evo 3D using XDA Premium App
Have you updated firmware from latest OTA?
Sent from my PG86100 using XDA App
FanOfSkynyrd said:
Have you updated firmware from latest OTA?
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
I'm gonna bet this is why you are having problems. Try updating the firmware.
Sent from my PG86100 using xda premium
I have updated the firmware, and far as the recovery i believe it's the one that was in the rev root.
try again wipe and reflash
Thanks for the help everyone, i figured the was when i rooted using revolutionary clockwork wasn't in it, so i installed a recovery and the rom works like a charm.
That was my suggestion. The rev root method fails to install cwm.
Ps there are currently no working kernels with the new basr
Sent from my EVO 3D on XDA premium app
Hello,
First and foremost, I'm loving this rom. I'm a noob and getting my hands dirty figuring all this out.
Now with that said:
When I try to connect to my wifi network it keeps saying authentication error occurred. I have tried everything and the only thing that fixes it is restoring my backup to my stock rom.
Please help!!!!
Sent from my SAMSUNG-SGH-I717 using xda premium
Smerleau said:
Hello,
First and foremost, I'm loving this rom. I'm a noob and getting my hands dirty figuring all this out.
Now with that said:
When I try to connect to my wifi network it keeps saying authentication error occurred. I have tried everything and the only thing that fixes it is restoring my backup to my stock rom.
Please help!!!!
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
I will say 90% of the people in here will say it is not the rom. just because theres seems to work. and i tend to agree. what have you tried to fix it? besides going back (to Stock). i have not had any issues with WiFi on Serephim yet, so i can not say what a fix would be. maybe wipe your cache's. when i had that issue on GB i had to reinstall the kernel and boom it worked. but seeing as though we do not have one yet for ICS. i would say wipe and worst case reinstall the from after a very Thurough Wiping Process.
the2rrell said:
I will say 90% of the people in here will say it is not the rom. just because theres seems to work. and i tend to agree. what have you tried to fix it? besides going back (to Stock). i have not had any issues with WiFi on Serephim yet, so i can not say what a fix would be. maybe wipe your cache's. when i had that issue on GB i had to reinstall the kernel and boom it worked. but seeing as though we do not have one yet for ICS. i would say wipe and worst case reinstall the from after a very Thurough Wiping Process.
Click to expand...
Click to collapse
I have wiped cache a few times and I just downloaded another rom and got the same issue.. The only time it works is on stock GB
Sent from my SAMSUNG-SGH-I717 using xda premium
Smerleau said:
I have wiped cache a few times and I just downloaded another rom and got the same issue.. The only time it works is on stock GB
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
Then if your into flashing right now, just try either the superwipe.
Or this is how i wipe.
I factory default/format usb from inside the rom.
I wipe factory/data from cwm
i wipe cache partition from cwm
i wipe delvik from cwm
then i flash "Rom" and reboot.
this leaves nothing from previous roms and or Gingerbreak roms.
try that and see if it works. if not then i am out of ideas until a kernel source is released.
Ok i will try that and see if it works...
Thank you!!!
Sent from my SAMSUNG-SGH-I717 using xda premium
the2rrell said:
Then if your into flashing right now, just try either the superwipe.
Or this is how i wipe.
I factory default/format usb from inside the rom.
I wipe factory/data from cwm
i wipe cache partition from cwm
i wipe delvik from cwm
then i flash "Rom" and reboot.
this leaves nothing from previous roms and or Gingerbreak roms.
try that and see if it works. if not then i am out of ideas until a kernel source is released.
Click to expand...
Click to collapse
I fixed it.... USER ERROR.. I Don't want to admit this but I was entering the wrong password and my old Rom had the password saved so I never had to enter it...
Sent from my SAMSUNG-SGH-I717 using xda premium
I recently attempted to root my HTC thunderbolt, and to do so I used the htc dev unlocker and then this "HTC Thunderbolt Tool'
rootzwiki.com/topic/27310-all-in-one-the-htc-thunderbolt-tool
After that I downloaded a rom and installed it through the 4ext recovery, it all install fine and I did do a factory/data reset but whenever I reboot after the rom install, I get the HTC white bootloader and then the screen become black with a back light to it.
I have tried a number of times to re-install the rom and have tried to use other roms but all of them seem to end the same way.
I have used:
BAMF FOREVER 1.1
BAMF MECHA ICS
AIRBORNE GOUI
Killsense 3.7.19
Lightning501
few more
My phone is a HTC Thunderbolt and when I attempted to root the phone it had a hboot version of 1.0.8 and had a stock version of ICS installed.
Sadly I have a phone without a working rom and I had forgot to make a backup so if anyone can help it would be greatly appreciated. Preferably I would like to keep the phone rooted but its not necessary.
Thank You
I'm a total xda-developor noob, so I hope I didn't mis a thread with a the solution all ready on it.
Make sure you do the factory reset, wipe dalvik and cache. Flash the ROM and reboot. Sounds like your missing a step somewhere 8)
Sent from my ADR6400L using xda app-developers app
tburns said:
Make sure you do the factory reset, wipe dalvik and cache. Flash the ROM and reboot. Sounds like your missing a step somewhere 8)
Sent from my ADR6400L using xda app-developers app
Click to expand...
Click to collapse
I have tried clearing everything but still doesn't seem to work.
One thing I forgot to mention is sometimes if I wait long enough on the blank screen It boots me back into the 4ext recovery, don't know if that makes much of a difference.
The way I have been installing the rom
Load ROM onto the SD
Do a "wipe data/factory reset"
Go into install sd and choose the Rom which is in a .zip file
I think this is how its supposed to be done, but not sure.
aplysenko said:
I have tried clearing everything but still doesn't seem to work.
One thing I forgot to mention is sometimes if I wait long enough on the blank screen It boots me back into the 4ext recovery, don't know if that makes much of a difference.
The way I have been installing the rom
Load ROM onto the SD
Do a "wipe data/factory reset"
Go into install sd and choose the Rom which is in a .zip file
I think this is how its supposed to be done, but not sure.
Click to expand...
Click to collapse
You need to wipe cache and dalvik cache too.
Sent from my Nexus 7 using Tapatalk 2
disconnecktie said:
You need to wipe cache and dalvik cache too.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
I have done that.
Problem is you were coming from the ICS OTA.
The All In One Tool alone will not get you rooted after taking the OTA.
In order to fully root and s-off after having the OTA loaded, you would need to follow the steps outlined HERE
santod040 said:
Problem is you were coming from the ICS OTA.
The All In One Tool alone will not get you rooted after taking the OTA.
In order to fully root and s-off after having the OTA loaded, you would need to follow the steps outlined HERE.
Click to expand...
Click to collapse
Your link dont work for me, id assume you were pointing to this wonderful thread
Milimbar said:
Your link dont work for me, id assume you were pointing to this wonderful thread
Click to expand...
Click to collapse
Correct Thanks I fixed the link in my first post.
I am using the thread and so far its working, just one last question. Do I have to install and use 4ext, or can I just use clockwork mod?
aplysenko said:
I am using the thread and so far its working, just one last question. Do I have to install and use 4ext, or can I just use clockwork mod?
Click to expand...
Click to collapse
You can use whatever Recovery you want, Clockwork Mod is old and not really suggested to use, especially with newer roms.
I miss the RA recovery I had on my first bolt. I use the ext4 recovery now. Glad Santod was able to help you out!!
Sent from my ADR6400L using xda app-developers app