Related
I googled how to reset my phone back to factory settings and they gave me this link
"[STOCK ROM] Odin3 One-Click Downloader"
(cant link links)
i misread that it was for the captivate, and i went through with all the directions.
now my phone keeps flashing an AT&T bootscreen and i cant get it in recovery mode..
help?
same here... that odin thing isn't working. Im just stuck at the vibrant boot screen. I know how to get into download mode but my pc or ODin doesnt recognize that i have my phone in. it's suppose to light up yellow or something. the tar files and all of that stuff is so confusing.
nevermind, i found the Odin program for the samsung vibrant and re did it.. but i still have BOTH at&t boot screen at the tmobile vibrant boot screen.. anyone know how to get rid of that? it would be much appreciated thanks!
http://forum.xda-developers.com/showthread.php?t=741027
where did u find it.. please share..
Edit: NVM..
stepinmyworld said:
same here... that odin thing isn't working. Im just stuck at the vibrant boot screen. I know how to get into download mode but my pc or ODin doesnt recognize that i have my phone in. it's suppose to light up yellow or something. the tar files and all of that stuff is so confusing.
Click to expand...
Click to collapse
You may have tried this but these are the steps that eventually worked for me.
1. Put your phone in download mode by plugging it in and then holding Vol Up+Down and Power. As SOON as the screen goes black release power but NOT Vol Up+Down.
2. Launch Odin
3. Unplug your phone.
4. Load the pit and pda files into odin.
5. Plug your phone back in. You should now see one of the small blocks turn yellow and show you the com port. If not, something is wrong with your drivers.
6. Click start. If it flashes, great. If it hangs at File analasys then repeat 1-5.
6a. If Odin hangs at cache.rfs then move on to 6b.
6b. Unplug your phone (Odin will say it was removed) and remove the battery. DO NOT SHUT DOWN ODIN!!!!!!
6c. Put the battery back in and plug it back into your computer and put it back into download mode using step 1.
6d. Press start on Odin and it should now flash.
Again, this worked for me, it may have been a fluke and I'm not willing to try it again. Good luck!!!
Does not boot!
What if the phone does not boot. All happened after I tried to flash the kernel back to the stock one. USB plugged in, battery is fully charged- still no sign of life. Any solution for that? No recover or download mode!
setzer715 said:
You may have tried this but these are the steps that eventually worked for me.
1. Put your phone in download mode by plugging it in and then holding Vol Up+Down and Power. As SOON as the screen goes black release power but NOT Vol Up+Down.
2. Launch Odin
3. Unplug your phone.
4. Load the pit and pda files into odin.
5. Plug your phone back in. You should now see one of the small blocks turn yellow and show you the com port. If not, something is wrong with your drivers.
6. Click start. If it flashes, great. If it hangs at File analasys then repeat 1-5.
6a. If Odin hangs at cache.rfs then move on to 6b.
6b. Unplug your phone (Odin will say it was removed) and remove the battery. DO NOT SHUT DOWN ODIN!!!!!!
6c. Put the battery back in and plug it back into your computer and put it back into download mode using step 1.
6d. Press start on Odin and it should now flash.
Again, this worked for me, it may have been a fluke and I'm not willing to try it again. Good luck!!!
Click to expand...
Click to collapse
i am completely lost when it comes to ODIN. I need to know the exact program to use. I have Odin Multi Downloader v4.03.. but it keeps giving me file path error and stuff. I have the right drivers i think because it does recognize my phone. im just so confused with this rar tar stuff. I would pay someone 20 dollars through paypal if they can walk me through this.
stepinmyworld said:
i am completely lost when it comes to ODIN. I need to know the exact program to use. I have Odin Multi Downloader v4.03.. but it keeps giving me file path error and stuff. I have the right drivers i think because it does recognize my phone. im just so confused with this rar tar stuff. I would pay someone 20 dollars through paypal if they can walk me through this.
Click to expand...
Click to collapse
I don't want your money, but if you PM me I will try to type up a detailed how to.
mffu said:
What if the phone does not boot. All happened after I tried to flash the kernel back to the stock one. USB plugged in, battery is fully charged- still no sign of life. Any solution for that? No recover or download mode!
Click to expand...
Click to collapse
What have you done to put it in download mode? You should power off your phone, plug it into your computer. It should then enter the charge mode where you see a picture of your battery being charged (or if you were like me and screwed up somewhere you may see a little picture of a phone, computer and yellow triangle in between them). If you get either of those then press and hold all three VOL up, VOL down and power. AS SOON AS the screen goes black release ONLY Power and it should go into download mode.
If you plug your phone into your computer (powered off) and nothing happens then you just be bricked. Call TMO and play dumb and hopefully get a replacement.
Ok,
The_Chrome_Coyote really helped me!!!! Thank you so much and im back up and running. There was something missing from the original tutorial, not that we should be spoon fed but I didn't have the WinRAR program on my pc and didn't know I needed to extract anything. I was looking for exe. for it to be a program and just open it. It's a little more complicated than that. I added my additions in BOLD
The_Chrome_Coyote's Original post to me:
Odin isnt that hard, its just REALLY picky about working.
Firstly you need to download the Samsung drivers for your OS which can be found:
http://forum.xda-developers.com/showthread.php?t=728929
added:
Second you need to make sure you download WinRAR x86 (32 bit) 3.93 (google it and you should be able to get it) otherwise if your pc doesn't have a program to recognize rar and tar files, you are out of luck.
then read this thread from JAC:
http://forum.xda-developers.com/showthread.php?t=734475
1. Now, Extract ODIN from its .rar and place the .exe on your desktop
2. Extract the .pit file from its.rar and place that on your desktop
3. Place the JFD .tar file on your desktop but DO NOT EXTRACT
Now you can use ODIN
4. Start ODIN Odin3. [Android + SLP], through ODIN select the .pit file
5. Hit "PDA" button, and through ODIN select the .tar file
6. Plug your TURNED OFF PHONE into the USB cable
7. Wait for the Battery/ charging indicator to start
8. HOLD VOL UP+ VOL DOWN+ POWER, as soon as the screen goes black RELEASE POWER, and continue to HOLD VOL UP+ VOL DOWN Until it enters download mode. Which should happen quickly and looks like a men at work highway sign.
9. If a COM port has turned Yellow in ODIN, then the device has been recognized. If it hasnt, unplug and plug your phone back in.
10. Dont select any options other than whats set at default.
11. Hit Start and be patient, takes me maybe 5 minutes to get back up and running.
NOTE: If you do not see a blue progress bar on the phone's screen after a minute;
11a. Turn your phone off by pulling the battery.
11b. CLOSE ODIN
11c. Start at step 4 again.
ODIN needs to be open and ready to flash before the phone is plugged in, in my experience. Its very picking about this, and not everyone has this issue, but I did and following all these steps helped me flash my phone more times than I can count the other day haha.
Hope this helped! and your $20, donate it to Wes, JAC, or Eugene to keep them making great stuff for our phone.
Reply With Quote
Thank you thank you thank you
mffu said:
What if the phone does not boot. All happened after I tried to flash the kernel back to the stock one. USB plugged in, battery is fully charged- still no sign of life. Any solution for that? No recover or download mode!
Click to expand...
Click to collapse
Same thing happened to mine when i tried odin. Now all i get sometime when it come on. are 7 rows of text that seems to be a code on screen in amber. Ishipped back 2 samsung. Since t-mobile won't take it after 14 days.
ok I screwed up guys.
I installed ROM manager from the market, flashed clockwork, it asked me if I wanted to partition and I said yes.
Now I just get a black screen at boot. I've managed to run odin and it says success. But I still just get a black screen after boot.
Little help?
I do have to say that if YOU DO NOT KNOW HOW TO EXTRACT A COMPRESSED FILE (RAR, ZIP,ETC) YOU HAVE NO BUSINESS FLASHING YOU'RE PHONE!! Odin or otherwise.
I am not being mean but at least stick to update.zip files flashed through recovery and make sure you read reviews of other users first, and understand the instructions completely.
Sent from my SGH-T959 using Tapatalk
daddysays said:
I do have to say that if YOU DO NOT KNOW HOW TO EXTRACT A COMPRESSED FILE (RAR, ZIP,ETC) YOU HAVE NO BUSINESS FLASHING YOU'RE PHONE!! Odin or otherwise.
I am not being mean but at least stick to update.zip files flashed through recovery and make sure you read reviews of other users first, and understand the instructions completely.
Sent from my SGH-T959 using Tapatalk
Click to expand...
Click to collapse
First: everyone was a noob at one time, so simmer down.
Second: Pleast post an update.zip that will make my phone work.
Cannot get past Galaxy S boot screen
I was using clockwork recovery installed through an update.zip file on my sd card. everything was working fine for about a day and then when i powered my phone off the next day and powered it back on it would not boot up past the Galaxy S screen. it goes to the Galaxy S screen and then goes blank but my hard keys stay lit up while my lcd is completely blank. I tried using the Odin method described in this thread and it seemed like it was going to work but i still cannot get past the boot screen. please help. willing to donate if needed
jmoney1017 said:
I was using clockwork recovery installed through an update.zip file on my sd card. everything was working fine for about a day and then when i powered my phone off the next day and powered it back on it would not boot up past the Galaxy S screen. it goes to the Galaxy S screen and then goes blank but my hard keys stay lit up while my lcd is completely blank. I tried using the Odin method described in this thread and it seemed like it was going to work but i still cannot get past the boot screen. please help. willing to donate if needed
Click to expand...
Click to collapse
If you can see the samsung logo you are fine. Load up recovery and try a full wipe first. If that fails then you can odin back to stock and root again.
Sent from my SGH-T959 using XDA App
1. If you have questions, there is a q and a forum for this device!!!!!!
2. THIS IS THE DEV PART OF THE FORUM. IE FOR DEVS POSTING STUFF FOR THE PHONE!!!!!
3. Learn how to Google. Not that hard. Example, you don't know what the *.rar extension is. GOOGLE IT!! Google knows everything.
4. If you don't have basic android or computer skills, don't try anything stupid. You do have a chance to brick your phone, even the pros like cyanogen have bricked their phones.
5. Don't offer cash for someone to fix your phone. Keep it in qna and some one will help you. Save your cash for the development that work hard on making these things work.
6. Can a mod please move this thread to qna.
7. THE MOST IMPORTANT THING. USE THE SEARCH FINCTION BUILT ONTO THE FORUMS. IT WILL SAVE YOU TIME AND THEN YOU WILL NOT LOOK LIKE NOOBS THAT JUST GOT THIS PHONE BECAUSE IT HAD AVITAR IN THE BOX!!!!!
Sent from my SGH-T959 using XDA App
cache.fs problem in odin
setzer715 said:
What have you done to put it in download mode? You should power off your phone, plug it into your computer. It should then enter the charge mode where you see a picture of your battery being charged (or if you were like me and screwed up somewhere you may see a little picture of a phone, computer and yellow triangle in between them). If you get either of those then press and hold all three VOL up, VOL down and power. AS SOON AS the screen goes black release ONLY Power and it should go into download mode.
If you plug your phone into your computer (powered off) and nothing happens then you just be bricked. Call TMO and play dumb and hopefully get a replacement.
Click to expand...
Click to collapse
I FOUND A SOLUTION TO THE CACHE.RFS PROBLEM!!
http://www.fractionalphones.com/?p=121
Hi guys,
I figured I'll post again here since I think I bricked my phone.... I was trying to install Eugene's Vibrant6.zip and I got stuck on the Vibrant Logo with Samsung at the bottom. I tried to reset with both volume buttons and power button and got to grey battery and nothing else...
What I did prior to this was I formatted system and data on the recovery screen as per some posts here and it would just boot into a loop. Windows won't recognize a device and it just shows grey battery image and it doesn't seem to be charging. Anyone can help me?
EDIT:
Out and in the battery, plugged in to USB and it just loads the battery image and it's all grey color as if fully discharged and just stuck on it. Device is also not found in my system so I can't do any adb commands. If I just reset it without the cable it would just sit on the Samsung boot loop. Anything I can do?
UPDATE: Ok, some good news! I heard the sound as it connected via USB, I can see the 2 drives, but they read as Removable Disk and I can't access them...
adb reboot recovery or download
error: device not found
What if simply format the drives via Windows right click menu? Will that do any good or bad? What are my options here? Any help will be appreciated!
UPDATE: Well... looks like this is pretty much a dead phone.... I right clicked and selected Format in My Computer and it just says There is no disk in Driver F: Insert a disk and try again.
Can I a mount an image somehow via MagicISO? Or is there something simpler that I just can't figure out?
Again, thanks for your help!
Thanks.
Has anyone experienced this or am I the only one?
M5devil said:
Has anyone experienced this or am I the only one?
Click to expand...
Click to collapse
Sorry I have never heard of this or witnessed it while flashing anything to my device. Obviously the battery screen signifies that the phone is off but is in charging mode and hitting the power button will boot the device up. (I'm sure you already know of this). Never heard of it being stuck at that screen after flashing. Hopefully you can get this solved soon. Good luck
M5devil said:
Hi guys,
I figured I'll post again here since I think I bricked my phone.... I was trying to install Eugene's Vibrant6.zip and I got stuck on the Vibrant Logo with Samsung at the bottom. I tried to reset with both volume buttons and power button and got to grey battery and nothing else...
What I did prior to this was I formatted system and data on the recovery screen as per some posts here and it would just boot into a loop. Windows won't recognize a device and it just shows grey battery image and it doesn't seem to be charging. Anyone can help me?
EDIT:
Out and in the battery, plugged in to USB and it just loads the battery image and it's all grey color as if fully discharged and just stuck on it. Device is also not found in my system so I can't do any adb commands. If I just reset it without the cable it would just sit on the Samsung boot loop. Anything I can do?
UPDATE: Ok, some good news! I heard the sound as it connected via USB, I can see the 2 drives, but they read as Removable Disk and I can't access them...
adb reboot recovery or download
error: device not found
What if simply format the drives via Windows right click menu? Will that do any good or bad? What are my options here? Any help will be appreciated!
UPDATE: Well... looks like this is pretty much a dead phone.... I right clicked and selected Format in My Computer and it just says There is no disk in Driver F: Insert a disk and try again.
Can I a mount an image somehow via MagicISO? Or is there something simpler that I just can't figure out?
Again, thanks for your help!
Thanks.
Click to expand...
Click to collapse
Slow down for a second. Your phone is definitely not bricked. Ive been over the edge, and been able to bring my phone back to life.
To clarify, you flashed vibrant6.zip through clockwork mod, and then the phone got stuck on the samsung S? How long did you let it sit there?
It sounds like just your ROM is messed up.
Are you able to "get into recovery"? Holding both volume buttons while you power on the phone, without it being plugged into usb.
Do you have Odin? And have you ever used it?
Its totally frustrating when your phone gets messed up and you don't know what to do.
I flashed the stock ROM via Odin and then wanted to install Vibrant6.zip. For that I entered into a recovery mode via Clockwork and as someone in the other thread advised, I formatted system and also data, don't recall exactly. Then it looped to a standard recovery mode and I just rebooted the phone. This is where it got stuck... Vibrant in the center and Samsung at the bottom of the screen. To test it I left it like that from night till this morning. In the morning I woke up it was on the same boot screen.
Before that at night, after seeing it hand at the boot, I held both volume keys and power, waited for it to reboot, and immediately it showed a circular progress bar, but not moving just highlighted the 12 o'clock bar and second later I see the battery image all in gray and nothing else. It just sits on that grey static image without actually charging it (no green section or flashing dots)
Boot logo only appears if I am trying to reset without the USB cable. On the boot loop I plug in the cable and I hear the USB connecting it, I see the 2 Removable disks, but both inaccessible and adb commands don't recognize the device.
Very weird, as in turned off mode it's not charging at all.. just shows this grey battery image with a circle progress froze on 12 o'clock bar.
That's pretty much it.... I was never able to enter into recovery nor download via the buttons. It would just always reboot into this grey battery screen....
Completely helpless.... I did order a new battery from TMO, maybe the battery is fried and that's why it's not charging and just sits on this stupid static grey battery screen.
ArbitrageMan said:
It sounds like just your ROM is messed up.
Are you able to "get into recovery"? Holding both volume buttons while you power on the phone, without it being plugged into usb.
Do you have Odin? And have you ever used it?
Its totally frustrating when your phone gets messed up and you don't know what to do.
Click to expand...
Click to collapse
Holding both volume keys and releasing power once screen goes blank, only show Vibrant logo again... I have tried this a million times
With USB cable it shows grey battery screen, without the cable just a Vibrant boot loop...
I'm assuming that you have the Samsung drivers installed.
Try the following steps:
Take out the battery and then put it back in but don't turn the phone on.
Plug it via USB.. does anything show up on the screen?
zephiK said:
I'm assuming that you have the Samsung drivers installed.
Try the following steps:
Take out the battery and then put it back in but don't turn the phone on.
Plug it via USB.. does anything show up on the screen?
Click to expand...
Click to collapse
Yes, I have the drivers installed as I was able to locate my device and use adb commands to enter into recovery and download. Also Kies worked.
Doing what you asked simply load the grey battery image and nothing else with a progress bar not spinning. Just sort of hangs on this image and that's all.
Booting without the USB cable loads the Vibrant boot loop. Connecting USB at this boot loop state, would play a sound as if it connected to my windows, but I can only see Removable disks that are inaccessible and adb doesn't find the device...
Very strange.... trying to use the button keys to enter into recovery or download is no use, as that just won't ever happen, even when phone was working fine.
Any other suggestions? I would return the phone for replacement... but I am not sure how it would look with all the files still on the internal disk including root if I am not mistaken... I had only few hours of sleep because of this headache
M5devil said:
Yes, I have the drivers installed as I was able to locate my device and use adb commands to enter into recovery and download. Also Kies worked.
Doing what you asked simply load the grey battery image and nothing else with a progress bar not spinning. Just sort of hangs on this image and that's all.
Booting without the USB cable loads the Vibrant boot loop. Connecting USB at this boot loop state, would play a sound as if it connected to my windows, but I can only see Removable disks that are inaccessible and adb doesn't find the device...
Very strange.... trying to use the button keys to enter into recovery or download is no use, as that just won't ever happen, even when phone was working fine.
Any other suggestions? I would return the phone for replacement... but I am not sure how it would look with all the files still on the internal disk including root if I am not mistaken... I had only few hours of sleep because of this headache
Click to expand...
Click to collapse
Are you sure that you're doing the right things to get to download? I've been in this situation and I wasn't able to get into recovery but I was able to get back into download mode.
I believe if you return it back and they find out it was rooted, they will charge you for it. If not, it'll appear on your bill.
I'm sure that you're doing the wrong things to get into download mode. If something is appearing on your screen it is a soft-brick and you're not bricked.
1. Take out battery, put it back in. (to turn the phone fully off)
2. Don't turn it the phone on!
3. Plug the phone into your PC, do not hit the power button!
4. See if the phone shows anything on the screen (powers on its own when plugged in)
IF the phone screen does 'turn on' after being plugged in without you hitting the power button, so far so good.
5. Now while it's on like this, hold the volume up and volume down buttons.
6. Hold the power button as well as the volume buttons until the screen goes black.
7. As soon as the screen goes black, let go of the power button! But DON'T let go of the volume buttons!
Click to expand...
Click to collapse
A tip to get into download mode is to put the phone HORIZONTALLY (sideways) and it will make it a lot easier.
I am pretty much positive about it. I know a lot of people can easily enter into recovery or download modes, but I know many can't and I am one of them. It would just load the grey battery image instantly as I let go of the power button.
1. Take out battery, put it back in. (to turn the phone fully off) DONE
2. Don't turn it the phone on! DONE
3. Plug the phone into your PC, do not hit the power button! DONE
4. See if the phone shows anything on the screen (powers on its own when plugged in) FIRST THING THAT APPEARS IS A CIRCULAR PROGRESS BAR THAT CHANGES TO A GREY BATTERY IMAGE WITH A BAR IN THE MIDDLE OF IT. STATIC IMAGE, NOTHING ELSE.
IF the phone screen does 'turn on' after being plugged in without you hitting the power button, so far so good.
5. Now while it's on like this, hold the volume up and volume down buttons. DONE
6. Hold the power button as well as the volume buttons until the screen goes black. DONE
7. As soon as the screen goes black, let go of the power button! But DON'T let go of the volume buttons! DONE
THE STUPID GREY COLOR BATTERY IMAGE APPEARS AS BEFORE....
I'm thinking maybe battery is fried and that's why the grey color screen appears and not the usual screen where you see the battery charging...
After reading this thread it's clear that my handset is one of the new ones that have recovery/download modes disabled via the volume+power buttons.
So that pretty much covers it... I hope TMO will not ***** about the files that are on the internal sd that I am unable to access and remove... unless anyone else has any fresh ideals how to gain access to the disk
I think I might have a similar problem.
I accidentally deleted the touchwiz framework so I can't do anything ON the phone. It boots up, and gets me to the lock screen. As soon as I unlock, I am greeted with dozens of unending force closes.
I can get into both download and recovery mode, however, I have not been able to get ADB to recognize the device. I am attempting to push the stock ROM to the internal memory to flash over everything.
I'm not sure what to do to get ADB to work but it's driving me nuts!
Stuck at vibrant? I have a fix
Check out android Dev Section... I figured out how to access download mode or stock recovery mode when you are stuck at the vibrant screen!!!! BACK IN BUSINESS VIBRANT OWNERS!!!
i got the same problem and nothing seems to work
Try this out http://forum.xda-developers.com/showthread.php?t=1103706
Feels like I'm having same issues..
the previous post requires opening the phone and I don't have tools for that..
Here's my issue.
I can't get into Recovery or Download and computer won't see phone to Odin.
I've got drivers installed and AIO Toolbox as well as ADB(which won't work because of computer not seeing phone.
Using the manual option(vol+ vol- power), nothing works.
I've done all the tricks like unplug it then hold vol keys plug it insert battery..
When I do plug in the phone to to even just get a charge in it goes the the battery, but my is is frozen or something. doesn't turn green or have a charging animation. After about a minute or so it was start up and boot loop. I read something about a bad battery? I've got two of them and they seemed fine before..
Before all this I had to Odin and go to stock. I was attempting to get ics back but I was being lazy and trying to do as little as possible..bad idea. I was following slim ics install and flashed cm9 daily, slimics and commons..and now this..
I'm not sure what to do..I usually search around xda or google..10 hours later.. idk..Anyone able to give help please?
:crying:
eduardo_reflex said:
i got the same problem and nothing seems to work
Click to expand...
Click to collapse
... do i even have to say it?
droyd666 said:
Try this out http://forum.xda-developers.com/showthread.php?t=1103706
Click to expand...
Click to collapse
this problem is most likely solved. After 2 years!
mylostlonelysoul said:
Feels like I'm having same issues..
the previous post requires opening the phone and I don't have tools for that..
Here's my issue.
I can't get into Recovery or Download and computer won't see phone to Odin.
I've got drivers installed and AIO Toolbox as well as ADB(which won't work because of computer not seeing phone.
Using the manual option(vol+ vol- power), nothing works.
I've done all the tricks like unplug it then hold vol keys plug it insert battery..
When I do plug in the phone to to even just get a charge in it goes the the battery, but my is is frozen or something. doesn't turn green or have a charging animation. After about a minute or so it was start up and boot loop. I read something about a bad battery? I've got two of them and they seemed fine before..
Before all this I had to Odin and go to stock. I was attempting to get ics back but I was being lazy and trying to do as little as possible..bad idea. I was following slim ics install and flashed cm9 daily, slimics and commons..and now this..
I'm not sure what to do..I usually search around xda or google..10 hours later.. idk..Anyone able to give help please?
:crying:
Click to expand...
Click to collapse
Try asking another question. But I suggest using a USB jig. They usually work. Then odin
Sent from Mount Olympus via Hermes
Did you ever get it fixed man? I literally did the very same to mine a while back and It works like butter as we speak. It is fixable with a mini-usb jig or dongle. You can make your own with about $3 worth of parts from radio shack but I recommend buying one, it will be easier. I for the record made mine simply twisting together the resistors and though it was tough to touch the right pins it did eventually work and get me back into download mode.
Hopefully you already got it fixed though. If not I can help you out.
i dont know what to do now, i have 2 samsung vib's and i redid one back to stock with odin, then updated it with the kies to the 2.2 i did a factory reset on my other phone and it rebooted into the vibrant screen,,,i try everything to get it to the download screen but it wont go,,,and my computer does not recognise it ....mind you it see's the other phone but not this one.....i dont know what to do now,,,and yes ive tryed every way to get it to the download or recovery screen no go on anything
crose948 said:
i dont know what to do now, i have 2 samsung vib's and i redid one back to stock with odin, then updated it with the kies to the 2.2 i did a factory reset on my other phone and it rebooted into the vibrant screen,,,i try everything to get it to the download screen but it wont go,,,and my computer does not recognise it ....mind you it see's the other phone but not this one.....i dont know what to do now,,,and yes ive tryed every way to get it to the download or recovery screen no go on anything
Click to expand...
Click to collapse
Have you tried the hardware jig? That is a guarantee getting it into download mode.
How are you trying to enter download screen? Did you disable voodoo first?
Sent from my SGH-T959 using XDA App
If it boots on its own without pushing power, take battery out and plug in usb, hold only volume up and down replace battery and should jump right to download. Bricked my phone every way possible, by now I can get out of almost anything.
Sent from my SGH-T959 using XDA App
phone is stuck on the black screen with white vibrant in middle and samsung at bottom, no matter what i do or how i do it thats were the screen sits....pull batt. plug in remove usb....it does not matter,,,and what is jig.
richtertrevor78 said:
If it boots on its own without pushing power, take battery out and plug in usb, hold only volume up and down replace battery and should jump right to download. Bricked my phone every way possible, by now I can get out of almost anything.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
nope stillgoes right to right to------------------ooooooo hold on rebooting now ,,woot
Hold volume up and volume down plus the power button, after the SECOND time you see the vibrant logo ONLY release the power button before the vibrant logo appears for the third time. Works every time for me
Sent from my SGH-T959 using XDA App
Are you sure you installed the samsung drivers right?
Rolling with TW's latest beefy beast.
I'm pretty sure if those options didn't work your Vibrant is a hardware locked one. You may want to try the hardware jig as mentioned above. I've fixed my hardware locked vibrant countless times with that little tool
http://www.youtube.com/watch?v=iSaeaAcJHqw
Moved of: Samsung Vibrant > Vibrant Android Development
To: Samsung Vibrant > Vibrant Q&A
Please put your questions to: Vibrant Q&A
Closed Thread
Snozbeary said:
Are you sure you installed the samsung drivers right?
Rolling with TW's latest beefy beast.
Click to expand...
Click to collapse
ya it computer see's the other vibrant phone and i was able to revert back to stock with odin,,,this phone it not recognised so i cant flash with odin..
phone wont even let me do a rom flash from rom manager,,it starts to then just gets stuck at the vibrant screen again....wtf,,,well the phone boots up normal but i cant get into the recovery or rom flash,,,,every time i try the phone gets stuck on the samsung load screen,,it takes 3-5 times just to get it to boot right ,,,after that,,im clueless
crose948 said:
ya it computer see's the other vibrant phone and i was able to revert back to stock with odin,,,this phone it not recognised so i cant flash with odin..
phone wont even let me do a rom flash from rom manager,,it starts to then just gets stuck at the vibrant screen again....wtf,,,well the phone boots up normal but i cant get into the recovery or rom flash,,,,every time i try the phone gets stuck on the samsung load screen,,it takes 3-5 times just to get it to boot right ,,,after that,,im clueless
Click to expand...
Click to collapse
well after tons of hours and trying every way i came to the concusion that the usb port might be damaged or corroded on the phone, like ive stated before my other vibrant connects perfect to the computer,,and on this phone i can wiggle the cord by the phone and you can hear it connect / disconnect from computer, but it still it not recognized by the comp. and so i dont think the jig would work becuase u would need a good usb connection to begin with,im thinking my gf got some water / snow or somthing in the port corroding the connection, i took a magnafying glass and seams like there is some green corrosion in the port.
nevermind ...........
Also bricked my phone - Will the jig help?
After trying to install Froyo through Kies and failing, after trying to put stock ROM with Odin and again failing, i got the phone to the state that the only thing I get when powering up the phone is the picture of "phone --! -- computer". It is not trying to boot at all.
Will the jig help to get it into download mode? Are their any other ways to bring it to life or it is total brick?
Tnx
marksht said:
After trying to install Froyo through Kies and failing, after trying to put stock ROM with Odin and again failing, i got the phone to the state that the only thing I get when powering up the phone is the picture of "phone --! -- computer". It is not trying to boot at all.
Will the jig help to get it into download mode? Are their any other ways to bring it to life or it is total brick?
Tnx
Click to expand...
Click to collapse
I had this same issue trying to install bionix v.. I made a jig and the jig just booted it to the phone ! computer screen... I called tmobile and they sent me a new phone!
marksht said:
After trying to install Froyo through Kies and failing, after trying to put stock ROM with Odin and again failing, i got the phone to the state that the only thing I get when powering up the phone is the picture of "phone --! -- computer". It is not trying to boot at all.
Will the jig help to get it into download mode? Are their any other ways to bring it to life or it is total brick?
Tnx
Click to expand...
Click to collapse
Pull everything out of your phone (battery, sim, sdcard)
Open ODIN on your PC and plug the USB into it (PC)
Put the battery back in and hold down both volume e
keys
Plug the USB into the phone
Should be in Download Mode and you can let go of the volume keys.
Removed----
marksht said:
Ok, so now need to build the jig.
Tnx
Click to expand...
Click to collapse
Try one more thing... Pull the battery and put it back in so your phone is off...plug in the charger so you get the charging screen...now when you see the charging icon hold in both volume buttons and the power button. You will see the icon flash off and back on then flash off and back on ...now when it flashes off for the third time...let go of the power button only..keep holding the volume keys
see if it will go into download mode that way
i had tried all of these methods and the jig...none of them worked...ervery time the screen turned on, it was the phone ! computer screen....no charging screen, nada..no matter what i did
ok try this too, pull batt,,,plug in charger,,,put batt. in then as soon as it lights up pull batt again,,then put back in fast,,then pull again as soon as it lights up ,do this 4 times and see what happens,,,my phone will get stuck on the samsung screen,and no matter what i do it gets / stays stuck like that untill i do the batt pull reinstall 4 times .then on the 4 th time i leave batt. in and phone boots up normal
I searched Stuck on Vibrant screen and tried everything I could. What else can I try???
I bought this phone from a friend who said it just froze on him. He wasnt rooted or anything.
----When I turn on the phone it gets to the vibrant screen and stays there.
--If I try the three button method, letting go of the power button when the vibrant screen comes on, it then starts a boot loop of that screen only.
----Get into download mode and using ODIN 1.70, I use the T959UVJFD and vibrant512.pit with re-partition checked and also unchecked. It stays stuck on Vibrant Screen for 20 minutes.
--Then I try the 3 button and same thing happens
----I ODIN "Eugene_2E_JK2_Froyo.tar.md5" and "s1_odin_20100512.pit" with re-partition checked and unchecked. It then gets into a boot loop of the little circle timer symbol, like its thinking or getting ready to charge for 20 minutes.
--Try the 3 button salute and get the vibrant screen boot loop.
----Try just turning it on and it just gets stuck on vibrant screen for 15 minutes.
----I then tried flashing the Zimage from "stock+Voodoo-Froyo-T959-UVJK6" kernal with re-partition checked and unchecked.
--Tried the 3 button salute both times and I still get the Vibrant boot loop.
I also tried with the T959UVJI6, get same results.
CAN SOMEONE PLEASE HELP ME. I DONT KNOW WHAT ELSE TO DO
First, i would recommend you to download the AIO Vibrant Toolbox because it have all the files you need, the latest version of Odin and all the instructions. Did you try unchecking re-partition when using Odin?
About your phone, usually, when you are able to go into download mode, and Odin can see your phone, you are not bricked, except, if there is any hardware issues.
Thanks for the quick reply.
I will try that next and then report.
Thank u.
Oh and yes I did try both checked and un-checked
So downloaded the AIO Vibrant Toolbox and tried using it with no success.
Still gets stuck on vibrant screen while waiting 20 min, even after battery pull the 3button salute will not work and it is still stuck on vibrant screen.
Any other ideas??
power off the phone
open odin
hold volume up and down
plug usb in
or
open odin
pull the phone battery
plug usb in
hold vol up and down
push battery back in (while holding vol buttons)
both of these ways should put you in download mode, if they dont straight away just keep trying and try different ports on your computer
kyle51 said:
power off the phone
open odin
hold volume up and down
plug usb in
or
open odin
pull the phone battery
plug usb in
hold vol up and down
push battery back in (while holding vol buttons)
both of these ways should put you in download mode, if they dont straight away just keep trying and try different ports on your computer
Click to expand...
Click to collapse
Thanks, but I am able to get into download mode and complete the ODIN. But when the phone resets, it stays on the Vibrant Samsung screen.
boner2007 said:
Thanks, but I am able to get into download mode and complete the ODIN. But when the phone resets, it stays on the Vibrant Samsung screen.
Click to expand...
Click to collapse
So Odin finishes flashing, then it continues to loop?
You're US T-Mobile Vibrant correct?
I personally used this:
http://androidspin.com/2010/08/09/how-to-restore-or-recover-your-samsung-vibrant/
Use this: T959UVJFD.tar (worked for me, updated easily)
http://files.androidspin.com/downloads.php?dir=androidspin/samsung/vibrant/&file=T959UVJFD.tar
P.S.: Use the latest version of Odin. Search in the forums.
Yessir, it continues to loop.
It is the us tmo.
I believe I used odin ODIN 1.87 or somthing like that from the AIO Toolbox. I will try those links and search to sdee if there is a newer ODIN.
I really appreciate the help. I tried my best explaining everything I tried in my OP. Except now I am using the ODIN 1.87.
boner2007 said:
Yessir, it continues to loop.
It is the us tmo.
I believe I used odin ODIN 1.87 or somthing like that from the AIO Toolbox. I will try those links and search to sdee if there is a newer ODIN.
I really appreciate the help. I tried my best explaining everything I tried in my OP. Except now I am using the ODIN 1.87.
Click to expand...
Click to collapse
Good luck, with the link I gave it should work and put your Galaxy S back to 2.1.
ODIN3 v1.7 - Thats the one I use. Good luck!
MasterGGM said:
I personally used this:
http://androidspin.com/2010/08/09/how-to-restore-or-recover-your-samsung-vibrant/
Click to expand...
Click to collapse
I love to reference that article!! LOL. I like the way that one starts, "So you've messed it up huh,....." rofl. That and it mentions JAC/JAD's thread, oh those were the days.
I got caught in the boot loop about a week ago and this worked for me as nothing else did to get back into recovery screen.
I don't remember if I pulled the battery or restarted the phone, but either way, once the phone was powered down, I held down the power button and both volume buttons, I waited until the VIBRANT logo came back up and BLINKED ONCE, then let go of only the power button, then I immediately hit the home button.
This brought me right back into recovery mode, well, clockwork recovery at which time I reflashed the rom prior that was working fine.
Might be worth giving it a shot.
I encourage you not to give up. I've been in similar situations before, and I always find it helps to exercise precise controls on your resuscitation attempts. Try using the same procedure in different USB ports, try using the same procedure 2 or three times in a row. Try Eugene's Froyo that does not brick and then going to stock JFD and then back to Eugene's again. Maybe try Heimdall.
I was on the latest nightly build of CM7 with Clockwork Recovery. I wanted to try ICS Passion - http://forum.xda-developers.com/showthread.php?t=1362961
It said I needed this bootloader - http://forum.xda-developers.com/showthread.php?t=1117990
That said I needed to use Odin so I used this guide - http://forum.xda-developers.com/showthread.php?p=20666234#post20666234
I got into Download mode, and Odin recognized my phone and I tried to install the new Bootloader, then it said it "failed" and my phone's screen went from the download mode to a black screen. So I unplugged my phone and took out the battery and when I put it all in, I get this screen with a phone connected to a computer with the "!" sign inbetween. Nothing I do changes it. I need help, I need this phone for work. How do I fix this?
Thanks in advance. I know it's Christmas day, and I would really really appreciate anyone who would kindly give me some direction here.
ODIN should recognize your phone in the connect to computer screen, if you see a yellow COM in ODIN, you're good to go, flash back to stock.
theexel said:
ODIN should recognize your phone in the connect to computer screen, if you see a yellow COM in ODIN, you're good to go, flash back to stock.
Click to expand...
Click to collapse
I've tried V3 and V4 and ODIN still does not see my phone. Do you have a link to the latest version? Should I have my phone connected when I run ODIN? I've tried running it when it is connected, and when it's not, and then connect it after ODIN has started. Thanks in advance!
Knightsofwar210 said:
I've tried V3 and V4 and ODIN still does not see my phone. Do you have a link to the latest version? Should I have my phone connected when I run ODIN? I've tried running it when it is connected, and when it's not, and then connect it after ODIN has started. Thanks in advance!
Click to expand...
Click to collapse
Try this.
1. Turn your phone off.
2. Take battery, sim, sdcard out.
3. Hold volume up & down buttons.
4. Connect usb without letting go of the buttons.
5. Put the battery in, without letting go of the buttons.
See if you can get to download mode that way.
theexel said:
Try this.
1. Turn your phone off.
2. Take battery, sim, sdcard out.
3. Hold volume up & down buttons.
4. Connect usb without letting go of the buttons.
5. Put the battery in, without letting go of the buttons.
See if you can get to download mode that way.
Click to expand...
Click to collapse
You are an Android saver! Thank you so much!!!
Future reference for those who red this - when you flash a boot loader UNCHECK "AUTO REBOOT". That way if it fails you can just try again.
I always uncheck it, if successful just hold the power button for 10sec for reboot.
Moped_Ryder said:
Future reference for those who red this - when you flash a boot loader UNCHECK "AUTO REBOOT". That way if it fails you can just try again.
I always uncheck it, if successful just hold the power button for 10sec for reboot.
Click to expand...
Click to collapse
I was pretty sure I did uncheck it but oh well. xD