Hi All
I have been told by o2 that the following is a feature:
When my XDA has an incoming call, with the headset plugged in, the 'ringing' only sounds from the headset instead of the speaker.
Is this a feature or a fault?
Comments gratefully received
I'd say bit of both.
I've had my headset plugged in and heard the ringtone through both the headset AND the unit itself, but perhaps there's a way of making it so that the headset is the only audio (perhaps plugging the jack in whilst on silent then turning it back up?).
I've definitely had the headset ring out whilst the jack is connected.
A
Feature or fault, that's a hard one to call!
I would say it working as designed, since the headset will always override the speaker in any fashion. :wink:
I've never heard of this. All the US units ring in BOTH if the headset is plugged in. Unfortunately, message notification and alarms sound only in the headset though.
Hi,
As far as I have found out the behavior is not consistent. My device sometimes only ring in the headset and sometimes ring both. I have found out if you plug in the headset and connect via USB cable to the PC it will always ring both in headset and speaker. This is true even after you have unplugged the USB. Seems to me some flag I set during USB connation that enables this... ?!
For notifications - this only works via the headset... for me at least.
I find this annoying - the SmartPhone works as it should in regards to this.
I run 4.00.05 baked at this site... keep up the good work !
I had this similiar feature/bug experience too.
My XDA rings both on the headset and its speaker. One day, at some point, I managed to put it into a strange state. I started playing an mp3 with the windows media player (WMP) without the handset, it played thru its speaker (that's correct). And then I plug in the headset, mp3 came out from only the headset (that's correct too).
After that, I pressed "stop" the mp3 in the WMP, and then "play" again, mp3 came out thru both the headset and its speaker.
I don't seem to be able to reproduce this "feature" anymore now. Well, of course, that's after a reboot a while later.
In fact, now I've got a question then. Does that mean the on/off of the speaker can be controlled in software? AFAIK, like the iPAQ, it's controlled in the hardware, that means if you plug in a headphone, the speaker of the unit will be off.
Does that mean the on/off of the speaker can be controlled in software?
Click to expand...
Click to collapse
Yes, evidenced by the phone behaviour. Most devices use a simple contact in the headset connector to disengage the speaker, but obviously not the PE.
DP00PM said:
When my XDA has an incoming call, with the headset plugged in, the 'ringing' only sounds from the headset instead of the speaker. Is this a feature or a fault?
Click to expand...
Click to collapse
I would rather ask it to be a user defined option. I believe the current setup (both ringing) came after noticing that you can simply forget your headset plugged in so you may miss some calls.
But in some situations (ex: meetings) I would like to keep the headset plugged in and get the rining only through it.
i found a bug in .73;
sometimes if i listen to music with standard no mic stereo headphones (Sennheiser MX160), once i disconnect headphones and try to make a call the audio signal is not switched to the phone's speaker. so the call is mute, the other end can hear me but i can't hear the other end, if i connect the headphones and disconnect again the audio signal get routed correctly.
this doesn't happen if i connect, instead of Sehheiser headphones, the standard sony headphones or my "DIY" car stereo adapter...
I think it's an hardware bug, something looking for the impedence connected
I did notice an issue that's only occurred once, where audio wouldn't swap between headphones and speaker. I was watching a movie trailer at home on the loud speaker, then put my headset (aJays One+ with mic) in to listen to some music whilst on the move and it just didn't acknowledge the headphones. It took several restarts before the phone would correctly detect the headset and switch between the two. This was also on the .73 firmware.
Hi guys, I'm having a problem with my bluetooth on this phone. I plug my phone into my cars speakers to play music and have my bluetooth headset on my ear for phone calls. On my Epic4G it automatically used bluetooth when a call came in.. but this phone doesn't. When I get a call I can answer it with my bluetooth physical button but it uses the phone mic and the car speakers. Is there anyway to fix this? I cant stand unplugging my aux cable EVERYTIME i have to answer my phone
thanks
There goes my first pos heret:
Recently I have bought an international SGS3 branded by T-Mobile and it is currently running I9300XXBLFB (ICS 4.04). Some time before that I have also bought a Belkin headphone adapter. What it does is that it basically provides a microphone and a standard 3.5mm jack port for the headphones of your choice. It also has a small 3button Apple like remote (answering button and +/- loudness controls). Good idea for someone who loves his headphones, which don't come with a microphone. It also comes with a TRRS ending typical for Apple.
The adapter worked ok on my Samsung wave with a TRRS switch (loudness control of course didn't work at all, but answering did; loudness doesn't usually work on anything but iCrap). It also seemed to work on my SGS3 at first, but without the switch (TRRS layout is the same as in Apple).
When plugged in I get a notification that headset is recognized, when I make a call the microphone works, headphones work and the answering button is able to stop the phone call. When not in a phone call the answering button starts and stops the music player, so again kind of a standard behaviour.
Now the fun part starts when I answer a phone call with the answering button. The call gets picked up BUT the headphone icon at the notification disappears (behaves like the headphones would get unplugged) and the microphone in the headset doesn't work anymore. I also am not able to drop the call and after I drop it with the phone itself the music switch via the headset doesn't work. Detaching and attaching the headset via the 3.5mm port again gives the headset icon back.
I compared it with two other headsets: stock and Thermaltake Isurus headset.
Both of them behave correctly when I answer a phone call. Both remotes work correctly as well, I am able to pickup and drop calls and the headset icon stays where it should.
Anyone has any ideas what may be wrong with the Belkin headset adapter? Or why SGS3 behaves so strangely with this accessory in particular? Anyone encountered this before?
Afternoon folks.
Suddenly my Streak won't come out of headset mode, even when I disconnect everything from the the headphone jack. The headset icon stays on consistently and no sounds comes out of the phone speaker even with no headset connected. Rebooted, still occurring on restart. Going into speaker mode during a call allows me to hear the caller. Also media playback, no sound unless headphones plugged in.
I wiggled a metal pin around in the headphone jack and this made the headset icon in the notification bar flicker briefly.
Anyway to force the phone into a different normal mode? (assuming likely fault some pin in headphone jack is faulty/bent in? and forcing phone into erroneously detecting headphone presence).
Running latest DSC rom and phone is rooted.
Any ideas welcome. Thanks.
f4zkh4n said:
Afternoon folks.
Suddenly my Streak won't come out of headset mode, even when I disconnect everything from the the headphone jack. The headset icon stays on consistently and no sounds comes out of the phone speaker even with no headset connected. Rebooted, still occurring on restart. Going into speaker mode during a call allows me to hear the caller. Also media playback, no sound unless headphones plugged in.
I wiggled a metal pin around in the headphone jack and this made the headset icon in the notification bar flicker briefly.
Anyway to force the phone into a different normal mode? (assuming likely fault some pin in headphone jack is faulty/bent in? and forcing phone into erroneously detecting headphone presence).
Running latest DSC rom and phone is rooted.
Any ideas welcome. Thanks.
Click to expand...
Click to collapse
nothing you can do except replace the headphone jack ...