Newb here. Any help would be great. Do I need to re flash something? Phone works fine, no issues. Just cant seem to get back into CWM.
I'm having the same problem on my Vibrant. It seems this is common when flashing 2.3.3 ROMs. CwM is probably working, you just can't see what you're doing. Reboot back into CwM, and try pressing the power key once the device "freezes." If it reboots, CwM is working, it's just invisible.
I'm also a noob, and I happen to be trying to fix the same problem.
Related
Hello all I recently installed Bionix 1.6. I didnt like the AllBlack theme so I flashed the black-to-stock theme, and now I keep getting force close loops, and I cant seem to access recovery. I KNOW for a fact that my phone wasnt hardware locked before.
When booting, Vibrant DOES flash a second time, but it just goes right to the Galaxy S boot animation after that.
I did a nandroid, so all I need is to get into recovery and Im good.
Any help?
I had a similar issue, I dont know if there is a quicker way to do this, but I odin'd back to stock, then rooted, downloaded recovery and nandroid from there.
Hope that helps
Is it even possible that my device somehow became hardware locked later on down the line? I ask because I cant seem to get into download mode either... Ive never heard of this, but any confirmation of that would ease my mind. I've seen people on here who can get into recovery but still have trouble getting into download mode.
Also when people with hardware locked phones attempt recovery, do they still get the Vibrant screen to flash a second time?
EDIT: I got into recovery through "adb reboot recovery"...sigh...Im going to see if I can get this back to normal from here.
I lurked around the GlitchV13 forum for a good long time and didn't find an answer to this.. and because I've only been lurking for about a year I wasn't able to post anything, so it's about time I guess.
I'm having problems with the GlitchV13 kernel. Maybe I'm just being dumb and don't see something here. some help would be greatly appreciated.
I flashed GlitchV13 on my CM7.1 using CWM 5.0.2.7. No problems at all. Running great for two days. Suddenly, my phone won't connect to wifi. Cycled airplane mode and nothing popped up, so I did a reboot.. annnd got stuck in a bootloop between the CM splash and my lockscreen (wtf). Rebooted again, and now I'm stuck on the CM7 screen. Tried to Odin CWM4, still no bueno, and I get a "E:Can't mount recovery/log/"blahblahblah.
Admittedly, this happened one time before- I did a clean install from stock. Then I got gutsy and flashed GV13 again. Any idea why this is happening? After I flashed Glitch I didn't touch any other recoveries, nor did I try to push anything with Odin or Heimdall.
I really just don't wanna flash back to stock again, and a new solution to why this is happening would be super!
Thanks in advance.
EDIT: Got it. Glitch comes packaged with 4.x CWM, while CM7 comes packaged with 5.0.2.7. Any way to reconcile the two? Worth it to push 4.x over 5.x, flash Glitch then backup so I don't have to do a full restore to CM7?
I had the wifi problem on the stock kernel once, so I dont think that problem is with Glitch.
I also just flashed the latest kernel version and they have updated CWM to 5.0.2.7.
That being said are you sure the recovery is making this much trouble on the phone? Usually it doesn't make a difference (besides backups and whatnot).
The glitch recovery has a few extra features that the CM7 recovery does not.
one being able to wipe dalvik and cache at the same time. (very minor but its more convenient)
I personally think its worth it.
What happened: I was trying to flash this ROM: http://bit.ly/vfmlQU I read that you needed to have a Gingerbread bootloader, so I decided to flash CM7 on for the bootloader needed. I did that, and then I went back into recovery, wiped everything (cache, Dalvik, data, etc.). After that I flashed the ROM. No luck, booted into CM7. Tried all the different updates he made, including the base (Simply Honey I believe): http://bit.ly/g2IFn2 Then, somehow, after screwing around, trying several different things, all the sudden it just stopped working. I tried to go into download mode and it just has this little loading ring. When I just normally turn it on, or try to get into the recovery mode, I get that VIBRANT screen with SAMSUNG at the bottom. I'm stuck. I dont know if it's a perminant brick, soft brick, or anything. Just please, someone help me fix my phone. Really, anything will be greatly appreciated!
Thanks in advance!
-whatiznt
UPDATE: I figured it out! GB Boot-loaders are only the + button for recovery. *Phew*
Before doing my flash, I did my research, and it seemed that in order to update from CM7 to CM10, I had to flash a different version of CWM. So I booted into recovery, flashed the version 6.xxx CWM, and then rebooted (I assumed that in order to flash CM10, I had to be in a CM10-compliant recovery). After getting back to my regular desktop, I rebooted into recovery as normal... only it didn't go into recovery. Instead, it paused for a moment like it would go into recovery, then booted to my normal desktop.
I've tried about a billion ways to boot into recovery, to include SD based recoveries, but it either goes to a larger sized N screen, then hangs up on a black screen, or it boots me to my normal CM7. I "can" continue to operate on CM7, but until I can boot into recovery, I can neither update to CM10 nor address any problems I come across in my current build.
Suggestions?
nashdude said:
Before doing my flash, I did my research, and it seemed that in order to update from CM7 to CM10, I had to flash a different version of CWM. So I booted into recovery, flashed the version 6.xxx CWM, and then rebooted (I assumed that in order to flash CM10, I had to be in a CM10-compliant recovery). After getting back to my regular desktop, I rebooted into recovery as normal... only it didn't go into recovery. Instead, it paused for a moment like it would go into recovery, then booted to my normal desktop.
I've tried about a billion ways to boot into recovery, to include SD based recoveries, but it either goes to a larger sized N screen, then hangs up on a black screen, or it boots me to my normal CM7. I "can" continue to operate on CM7, but until I can boot into recovery, I can neither update to CM10 nor address any problems I come across in my current build.
Suggestions?
Click to expand...
Click to collapse
Have you tried holding on the power button and the "n" button as you boot? I recall running into a similar issue as yours and that was the only way I could get to recovery. If you're able to get into recovery that way I would consider maybe getting a different version fo CWM. I had trouble with the 6.0.1.5 version. You might try the 6.0.1.2 version here: http://forum.xda-developers.com/showthread.php?t=1640958&page=5
I ran into something similar when I tried installing CWM 6.x.x. I chickened out and decided to run CM10 from SD instead, and I'm so happy on the performance now that I do!
I did the "unbrick" thing with "repart.img" to get the Tablet back to "out of the box" state and sighed of relief when it worked!
Yeah, I was afraid of that. I really didn't wanna go through the process of unbricking, but I guess there's no help for it.
troy9829 said:
Have you tried holding on the power button and the "n" button as you boot? I recall running into a similar issue as yours and that was the only way I could get to recovery. If you're able to get into recovery that way I would consider maybe getting a different version fo CWM. I had trouble with the 6.0.1.5 version. You might try the 6.0.1.2 version here: http://forum.xda-developers.com/showthread.php?t=1640958&page=5
Click to expand...
Click to collapse
Power + 'n' doesn't work on my NT either, I have to turn the device off, insert the SD with CWM, then plug in the (still turned-off) NT to a wall charger and allow it to boot up that way - then (and only then) do I boot into recovery, and without touching any buttons. Hopefully that helps
Dang, whoever thought this would be such a booger of a deal?!?
Okay, first off, let me apologize for coming off like a noob, but it seems there's so much information out there that everything's kinda bleeding together, so let me tell you where I'm at.
I've unbricked and restored the NT to stock 1.4.2
I tried rooting, but the only root I can find that is flashable from SD is the 5.5 CWM which is older than the CWM 6.xxx that every CM10 version calls for. So I went ahead and did the root, so now I have a stock NT with root access. This is where I'm getting stuck...
I'm at this point...
http://forum.xda-developers.com/showthread.php?t=1640958&highlight=cwm+1+4+2
...and it apparently requires you to reboot into CWM in order to install CWM?!?
I've found the CWM 6+ files I think I need, but when I try to follow the instructions, my NT won't kick over into recovery---it keeps booting straight to the rooted 1.4.2 stock rom. I've found guides that take you from stock 1.4.3 to CM10, some that take you from 1.4.2 to root, and I even found Indirect's CM7 (without the instructions on how to get CWM on there in the first place!). I even downloaded Rom Manager and tried to boot into recovery that way, but it said there was my device wasn't supported.
I've been staring at this dang screen for three hours, trying to find a step by step, and I'm coming up empty. Maybe I'm just too frustrated at this point and need a breather.
What I need to know is how to install CWM 6+ on a NT that's either rooted or stock 1.4.2 (I still have the unbrick SD card) so that I can boot into CWM. From there, I can make my way through installing CM10. Help. Please. Am about to chew the lining out of my cheek.
I don't know if this might be helpful? http://forum.xda-developers.com/showthread.php?t=2037368
Sent from my NookColor using Tapatalk 2
Not yet. I was expecting OTA to kick in, updating my current 1.4.2 to 1.4.3, but it hasn't. Honestly starting to think my NT doesn't want to be rehacked LOL
Okay, so here's what I'm doing at the moment...
I'm at rooted stock. I moved CWM 6.0.1.2, CM10, and gapps over to internal SD.
I booted into recovery with an older version CWM SD card (SD card image with Win32 > turned off NT > insert SD > plug in USB to autoboot)
While in recovery (from SD), I flashed CWM 6.0.1.2 , CM10 (meghd00t), and gapps-jb-20121011.
I reboot...
WE HAVE JOY!
Now to check to see if the thing's gonna run right (got a whole lotta "XYZ has stopped" error messages upon boot up)
Dangit, keep getting those error messages about Gapps stopping and Google Play, and other stuff. Not allowing me to do hardly anything I need to. I can't even boot into recovery from the home page---it still loads straight to the Rom. In order to get into recovery, I need to use the SD that I made to get into recovery in the first place. Going to wipe dalvik and the other caches to see if that helps...
After wiping the caches, I boot into CM10 with no error messages. I DL'd a game from my Gmail account, and it appears to be working properly. Thanks for the suggestions and for letting me vent
I just went thru this similar ordeal too. It took me over 3 weeks to finally find a recovery & cm10 combo. What I found is that I couldn't get ANY version of twrp to act right. Indirect's flashing tool was invaluable. I finally used it to flash a cwm 6.x from Laverne's thread. It seems that not all versions of cwm 6.x are compatible with certain cm10 roms too & by chance I hit a combo that finally worked! I'm staying with what I got for a while!
Sent from my Nexus 7 using Tapatalk 2
So ,im sorry but its a long story. Hopefully someone can help. My note is Rooted Ive been using TWRP. Everything had been fine until 2 days ago. I tried flashing a ROM i found on Goomanger.( I had been running liquid smooth) just wanted to try something different. Anyways it got stuck on a boot loop. Cant remember the name of the Rom. Anyways i was able to get back to recovery, thankfully. But when i wiped and flashed back to liquid smooth it would say optimizing apps, then it would reach a certain number then reboot and star all over again. So then i tried another Rom and the same thing happened. tried flashing back to stock rooted but it would turn on then completely crash and star booting up again. So finally i was able to flash paraandroid 4.1.2 and Gapps, but here is the kicker i have no service (AT&T) says cannot locate network, my IMEI is gone basically the cellular isn't working. Everything else works fine WiFi,apps, camera. Just cant make calls. I really need your guys help please.:crying:
If you have a suggestion please let me know, i hate using an old Iphone
dar101978 said:
So ,im sorry but its a long story. Hopefully someone can help. My note is Rooted Ive been using TWRP. Everything had been fine until 2 days ago. I tried flashing a ROM i found on Goomanger.( I had been running liquid smooth) just wanted to try something different. Anyways it got stuck on a boot loop. Cant remember the name of the Rom. Anyways i was able to get back to recovery, thankfully. But when i wiped and flashed back to liquid smooth it would say optimizing apps, then it would reach a certain number then reboot and star all over again. So then i tried another Rom and the same thing happened. tried flashing back to stock rooted but it would turn on then completely crash and star booting up again. So finally i was able to flash paraandroid 4.1.2 and Gapps, but here is the kicker i have no service (AT&T) says cannot locate network, my IMEI is gone basically the cellular isn't working. Everything else works fine WiFi,apps, camera. Just cant make calls. I really need your guys help please.:crying:
If you have a suggestion please let me know, i hate using an old Iphone
Click to expand...
Click to collapse
Just odin back to stock. Get a complete factory stock image from the main sticky thread and flash it with Odin and Download Mode. There's a bug on one of the TWRP versions with 4.3-based ROMs that will put it into a bootloop by breaking device reboots. I was unable to flash my way out of the problem and was forced to do a complete reimage which solved all the problems and put me right back to clean-out-of-the-box state, then I reinstalled TWRP (though an older version before the boot loop bug) and re-flashed my custom ROM. The package I used was the stock image and Odin tool all in one .exe, just plug in to download mode and run it and it flashed bootloader, recovery, system, kernel, etc. all back to stock.
CalcProgrammer1 said:
Just odin back to stock. Get a complete factory stock image from the main sticky thread and flash it with Odin and Download Mode. There's a bug on one of the TWRP versions with 4.3-based ROMs that will put it into a bootloop by breaking device reboots. I was unable to flash my way out of the problem and was forced to do a complete reimage which solved all the problems and put me right back to clean-out-of-the-box state, then I reinstalled TWRP (though an older version before the boot loop bug) and re-flashed my custom ROM. The package I used was the stock image and Odin tool all in one .exe, just plug in to download mode and run it and it flashed bootloader, recovery, system, kernel, etc. all back to stock.
Click to expand...
Click to collapse
Thanks thats what i did, I just basically had to use KIES to use the emergency recovery, then root my phone again. My question is what version of TWRP causes this? cause i used the newest version i could find off GOO. My other concerne is, will it accept or be safe to use a custom ROM? Well i gues ill find out :laugh: THANKS AGAIN!
Everyone with the sgh-i717 is having problems with the latest TWRP and the most stable version is 2.5.0.0. Go with that one or you'll be starting all over again I imagine. And don't just stop at the download link in the OP's, read the thread and find out what's going on. The problems with TWRP have been going on for a while and the development threads have a lot of comments about the latest build causing problems. Good luck! :good: