Huge problem - Folio 100 General

Hi i have this huge problem... my folio doesnt restart. i flashed folio mod 1.4 and it starts and sets up and all but when i turn it off and trun it on again it doesnt turn on! the android symbol doesnt even show up! i have reflashed it a few times and it wasnt like this before! what can i do!! :S

mazlano27 said:
Hi i have this huge problem... my folio doesnt restart. i flashed folio mod 1.4 and it starts and sets up and all but when i turn it off and trun it on again it doesnt turn on! the android symbol doesnt even show up! i have reflashed it a few times and it wasnt like this before! what can i do!! :S
Click to expand...
Click to collapse
Did you performed factory (recovery) reset?

dacasamir said:
Did you performed factory (recovery) reset?
Click to expand...
Click to collapse
yes i did several times. it turns on after the hard reset, but after that when i reboot it doesnt start again. this started when i switched from cm7 to foliomod... any chance that might have been the cause? i really like folio mod and would prefer sticking to it! :s

mazlano27 said:
yes i did several times. it turns on after the hard reset, but after that when i reboot it doesnt start again. this started when i switched from cm7 to foliomod... any chance that might have been the cause? i really like folio mod and would prefer sticking to it! :s
Click to expand...
Click to collapse
EDIT:
i noticed the screen blinks a few times when rebooting. The "android" at the beginning for folio mod never shows up! :s
when i use the cm7, this problem is no longer there. i will try and use another rom. please some one help? !

Had something simillar to it...
this is my roms sequence
Official Toshiba rom - CM7 - FolioMod 1.4 - FolioBlur 1.2
After restart, screen goes black and blinks periodically and nothing happens....
What i did is did hardreset before & after installing FolioBlur
Problems seems gone - not sure if it helps

Related

[Q] (probably) big problem with hero

Hi guys!
i just wanted to ask you a question: yesterday i tried to install the floyo rom but i guess something went wrong..after installing the rom via rom manager during the first boot the phone got stuck loading the new rom..it keeps showing "floyo" on the screen but nothing happens...it just keeps loading and loading and loading....is there any way i can boot the phone using the factory presets or something?
thx a lot
HI,
You're not in the right forum section to ask this, but anyway.
That problem could occur time to time, in fact, I had it several times. But don't need to worry, if you're phone is still booting, that's not a big problem then.
What you can do is reflash the rom like you did the first time.
But first, May I suggest you to check if you're phone is actually stock by using logcat ? Because the first boot can be quite long (in my case, it takes around 10~12 min). To do so, use your usb cable, go to command prompt and type
adb logcat
if there are things on the screen, and if that screen is moving, then just be patient...
LTourist said:
HI,
You're not in the right forum section to ask this, but anyway.
That problem could occur time to time, in fact, I had it several times. But don't need to worry, if you're phone is still booting, that's not a big problem then.
What you can do is reflash the rom like you did the first time.
But first, May I suggest you to check if you're phone is actually stock by using logcat ? Because the first boot can be quite long (in my case, it takes around 10~12 min). To do so, use your usb cable, go to command prompt and type
adb logcat
if there are things on the screen, and if that screen is moving, then just be patient...
Click to expand...
Click to collapse
ops!!! sorry about that!! what's the right section?
anyway....thx for your answer but i' ve been veeeeeeeery patient...i've waited for more than an hour but nothing happend
i'd like to reflash it but i don't how to do that since i cannot even access my home screen!! ah and if i connect the usb cable nothing happens..i just see this thing loading stuff.... bit frustrating
eyah78 said:
ops!!! sorry about that!! what's the right section?
anyway....thx for your answer but i' ve been veeeeeeeery patient...i've waited for more than an hour but nothing happend
i'd like to reflash it but i don't how to do that since i cannot even access my home screen!! ah and if i connect the usb cable nothing happens..i just see this thing loading stuff.... bit frustrating
Click to expand...
Click to collapse
OK. Open the back of your phone, remove the battery.
Replace the battery and you can try to boot your phone again.
Or you can directly boot into recovery. From this place you have choice to rewipe everything and reflash the rom. Or you can just load your nandroid backup; I assume you made one, did you?
boot your phone with the home button pressed(so press the home key, press hang up(so he will start) and after 10 seconds or so you're in the recovery menu
As above really..
Remove battery, then turn back on holding power and the home button.
This should bring you to the recovery ROM, in their, you can wipe your phone clean, and re flash a new ROM.
If you want to put a new ROM on your SD, you can mount the SD Via USB from the Recovery Menu, or just remove the SD and put in a card reader.
Then wipe/flash new ROM.
From your first post im guessing you tried to install Floyo? http://forum.xda-developers.com/showthread.php?t=784689&page=146 ?
eyah78 said:
Hi guys!
i just wanted to ask you a question: yesterday i tried to install the floyo rom but i guess something went wrong..after installing the rom via rom manager during the first boot the phone got stuck loading the new rom..it keeps showing "floyo" on the screen but nothing happens...it just keeps loading and loading and loading....is there any way i can boot the phone using the factory presets or something?
thx a lot
Click to expand...
Click to collapse
Just reflash the rom, but wipe everything..; then, Everything will be fine!
guys!! thk u all for your answers
all is fine now! removed battery reflashed original rom and then reflashed floyo...sweeeet ^_^
in case it didnt show that was my first attempt to install a custom rom and when the phone got stuck i kinda freaked out .....don't know what i did wrong the first time though.... anyway...thanks

[Q] X10 won't turn on after flash to 1.6

Hello everyone!
I have a problem with turning my phone.I had flash my phone back to 1.6 and I turned it on but it began continuous vibrate then I removed battery and tried turn on again but it vibrated again.
After that I tried flash my phone to 2.1 from this thread http://forum.xda-developers.com/showthread.php?t=683793
but when I turned it on my phone just vibrate a bit , there was green blink and the screen showed nothing but is was light
Help me pls!!!!!
ChikCool said:
Help me pls!!!!!
Click to expand...
Click to collapse
To try and resolve your issue, try THIS instead, and give the phone at least 5 minutes to boot, if it doesn't after that try again.
ChikCool said:
Hello everyone!
I have a problem with turning my phone.I had flash my phone back to 1.6 and I turned it on but it began continuous vibrate then I removed battery and tried turn on again but it vibrated again.
After that I tried flash my phone to 2.1 from this thread http://forum.xda-developers.com/showthread.php?t=683793
but when I turned it on my phone just vibrate a bit , there was green blink and the screen showed nothing but is was light
Help me pls!!!!!
Click to expand...
Click to collapse
had the same problem a few weeks ago, here's the thread with the sollution:
http://forum.xda-developers.com/showthread.php?t=884774
good luck
kistigun said:
had the same problem a few weeks ago, here's the thread with the sollution:
http://forum.xda-developers.com/showthread.php?t=884774
good luck
Click to expand...
Click to collapse
Can you tell me what I need to do with this ROM http://hotfile.com/dl/59478017/8dad8..._F3v3.rar.html ????I thought that this ROM was needed to download
So thank you very very very very much my phone return to life.And can I flash my phone to 2.1 after that???
oh so srr I did wrong again Srr

[Q] Freeze at start up

Hi,
I have an Xperia X10 with Cyagenmod 6 (gingerbread 2.3.3) but it's broken. It won't boot any more. Some days ago it just went out, and it won't start up again. The phone behaves as if it freezes the moment android should load. Like if your computer would freeze in bios, unable to load your operating system.
I'm also not able to repair it with SEUS because although it recognizes the phone, it can't reset because the phone freezes just before the stage in witch it can reset.
I am kind of a noob with these things and therefore hope one of you guys could help me out. I'm not really looking foreward te buying a new phone already
Thanks!
Freekh
kinda same problem..
i'm removing battery, put back and after holding power the phone shows green led for short time and vibrates for a sec and that's.
add:
i've flashed it before the problem occurs.. flashed, phone booted up, everything normal.. put on usb for charging, changed language and time when it suddenly freezed
This is what happened to mine what country u in
sent with a geordie kiss using wb 2.3.3
what do you mean with "country"?
freekh said:
Hi,
I have an Xperia X10 with Cyagenmod 6 (gingerbread 2.3.3) but it's broken. It won't boot any more. Some days ago it just went out, and it won't start up again. The phone behaves as if it freezes the moment android should load. Like if your computer would freeze in bios, unable to load your operating system.
I'm also not able to repair it with SEUS because although it recognizes the phone, it can't reset because the phone freezes just before the stage in witch it can reset.
I am kind of a noob with these things and therefore hope one of you guys could help me out. I'm not really looking foreward te buying a new phone already
Thanks!
Freekh
Click to expand...
Click to collapse
Try re-flashing the stock rom using flashtool. That solves Every problem for me ^^
freekh said:
Hi,
...
I'm also not able to repair it with SEUS because although it recognizes the phone, it can't reset because the phone freezes just before the stage in witch it can reset.
...
Click to expand...
Click to collapse
not able to flash anything
blmn1337 said:
not able to flash anything
Click to expand...
Click to collapse
Why exactly are u unable to flash anything? Are you following the proper procedure?
Here's a guide fro using flashtool http://forum.xda-developers.com/showthread.php?p=10879507#post10879507
fawadmir said:
Why exactly are u unable to flash anything? Are you following the proper procedure?
Here's a guide fro using flashtool http://forum.xda-developers.com/showthread.php?p=10879507#post10879507
Click to expand...
Click to collapse
i've posted some logs in other thread
http://forum.xda-developers.com/showthread.php?t=1190540&page=2
umm.. Do u move your mobile when the flashing process is going on? The xperia USB slot is pretty sensitive. Moving the phone can cause it to lose connection and abort the flashing process
28/048/2011 21:48:10 - ERROR - Error flashing. Aborted
i always receive this error if i move my phone.
Notice if you hear the USB device unplug sound from your PC before this error occurs.
^^
fawadmir said:
umm.. Do u move your mobile when the flashing process is going on? The xperia USB slot is pretty sensitive. Moving the phone can cause it to lose connection and abort the flashing process
28/048/2011 21:48:10 - ERROR - Error flashing. Aborted
i always receive this error if i move my phone.
Notice if you hear the USB device unplug sound from your PC before this error occurs.
^^
Click to expand...
Click to collapse
it doesnt seem to be a connection-problem (no usb unplug sounds).
it seems that the phone is in a state, where bootup is not possible
But the phone is not required to boot during flashing. Did you try changing the USB slot on your PC? The one you're connecting your phone to? Try another slot. Sometimes that works too.
fawadmir said:
But the phone is not required to boot during flashing. Did you try changing the USB slot on your PC? The one you're connecting your phone to? Try another slot. Sometimes that works too.
Click to expand...
Click to collapse
same result. can't flash
Me too. Can't flash with Flashtool (latest version), even without moving my phone. It starts flashing, but the progress bar shows of no progress. After a while it just says Error - Abort Flashing. I tried all of my USB port, but nothing changes.
after doing and trying my battery got completely drained (red led blinking) so i left it on the wallcharger for ~1day..
then at sometime it managed to boot up itself.. i left it for charging till 100%
after that i did a few "wipe battery stats" in xrecovery and now it seems to work stable again..
is it possible that messed up battery stats could cause the problem?
Wow, that would be nice.
A question! Was the little led on while charging? Because when I put my phone in the loader, it turns green (as if the battery is completely empty) and after a while it just goes off (when it would normally turn red). Do you have that to?
Putting my phone in the loader now, and waiting till tomorrow! Hope this helps!
yea, i've noticed this with my phone too..
strange led behavior..try to plug the charger first (green led turns on, cant say whether its charging or doing anything else) and then put in the battery and wait
maybe you're lucky and the phone will boot
and report pls
I didn't work. I've put my phone in the loader for over 24 hours, but nothing happened.
But my phone wasn't completely drained. Perhaps that is a condition to make this work. The only question is, how do I drain my battery when I can't turn on my phone?
i have used an 5watt light bulb ^^
connected on + and - and then waited till light goes out
Wel, I connected a little lamp and waited until it went out. Then when I put my battery in my phone and pressed the ON button nothing happend, not even the green light flashing shortly.
When I put my phone in the loader the LED started flashing red. And that whent on for a while until it stoped, and the LED did nothing. Then I waited over 24 hours, but nothing has happend.
When I put my phone in the loader now, it's just like before, the green light burns a little while, then nothing..
it happened to me again.. freeze and then no boot.
but i think i know whats wrong. for my phone i can say, that the battery is ok and the rom/os aswell.
its hardware problem. something is screwed up inside the phone.
when i press the phone at randomly places and hold it + then pushing on-button it boots up
i will open it tomorrow

[Q] I know, it's not bricked....

Right, so my i5503T (Australian) was having some wi-fi troubles. I looked it up, and it was suggested to me that I upgrade to Cyanogenmod 7 (for Galaxy 5). Anyway, I installed Clockworkmod, it was fine, then I hard reset the phone (through Clockworkmod) and from then on, when booting it got to the flashing samsung, and stayed there for over 3 hours. After that I turned it off. I did the stupid thing, and went ahead installing Cyanogenmod. Now, as soon as I turn it on, it says 'ANDROID' in small white text in the top-right corner of the screen, and won't go away, EVER. ANY help would be very much so, I got the phone as a gift for chistmas..... *facepalm*
Thanks.
EDIT: It was (natively?) running Froyo before I broke it, and I would like to get it back there, or better (Cyanogenmod).
I have a working Eclair rom (2.1), but I don't want to use it...
Are you able to get it into download mode at all?
Sent from my R800i using XDA App
Yea, I can get into download mode fine, but booting up, not so much.
Update: I used Check Fus Downloader to get firmware, had to use New Zealand as there was no actual Aussie model availible (???). Anyway, I flashed it with odin 4.28 (please tell me it is the right version!) and it is doing the same thing, with the flashing Samsung logo and all. Also, it vibrates once, then three times a few seconds later, then repeats every.... ummm, 30 secs?
Hey, I'm not an expert on this subject but I have messed around with my Galaxy 5 a lot, I broke it 4 times, but I'm guessing your problems could be fixed by;
Shove your device into Download Mode.
Use Odin to flash Clockwork Recovery.
It should now reboot into CW recovery.
Clear dalvik cache, cache and do a reset.
That might sort out any problems as my phone did this after my first flash but clearing the above sorted it out, if that doesn't work then do the same again but then; try flashing another rom onto your device, and see how it goes.
Somebody with more knowledge should correct my post if need be.
mrepic37 said:
Update: I used Check Fus Downloader to get firmware, had to use New Zealand as there was no actual Aussie model availible (???). Anyway, I flashed it with odin 4.28 (please tell me it is the right version!) and it is doing the same thing, with the flashing Samsung logo and all. Also, it vibrates once, then three times a few seconds later, then repeats every.... ummm, 30 secs?
Click to expand...
Click to collapse
try removing your battery and let it out for few minutes, 2 min is enough, than insert the battery and reboot..
hope that solve your loop..
P.S.: did you do a wipe?
Could it have anything to do with the fact I have a i5503T, and that the ops is i5508?
OK, well it's fixed now, sorry for the trouble. It turned out I was missing one of the cyanogenmod files. Soooo, yeah I fell like a massive idiot, but everything turned out fine and well. Cyanogenmod is heaps better than Froyo, so I'm glad about that. Thanks all.
mrepic37 said:
OK, well it's fixed now, sorry for the trouble. It turned out I was missing one of the cyanogenmod files. Soooo, yeah I fell like a massive idiot, but everything turned out fine and well. Cyanogenmod is heaps better than Froyo, so I'm glad about that. Thanks all.
Click to expand...
Click to collapse
sometmes it happens..
mrepic37 said:
OK, well it's fixed now, sorry for the trouble. It turned out I was missing one of the cyanogenmod files. Soooo, yeah I fell like a massive idiot, but everything turned out fine and well. Cyanogenmod is heaps better than Froyo, so I'm glad about that. Thanks all.
Click to expand...
Click to collapse
im havin the same problem, can you send me the links to ALL the files you used and i'll hav yet ANOTHER go at it.
cheers m8

Bootloop, Not rooted

So my phone started restarting randomly. It will only show the Samsung logo turn off and do the same thing again. Its not rooted and I am pretty sure that its not from something I installed recently (Everything was from the play store and no immediate problems after any of them). When I did the hold volume up,down and power it would only keep on restarting still. But when I just hold volume down it comes to something else that asks if I want to install a new rom. So I was wondering what I should do. Install a new ROM and then revert back ? or will that not work? Also I have a extra I717 with a broken screen I could swap the insides and see if that would help. Also I don't know much about rooting and stuffs. Lemme know what I should do guys! :highfive:
Klmnnoooooo said:
So my phone started restarting randomly. It will only show the Samsung logo turn off and do the same thing again. Its not rooted and I am pretty sure that its not from something I installed recently (Everything was from the play store and no immediate problems after any of them). When I did the hold volume up,down and power it would only keep on restarting still. But when I just hold volume down it comes to something else that asks if I want to install a new rom. So I was wondering what I should do. Install a new ROM and then revert back ? or will that not work? Also I have a extra I717 with a broken screen I could swap the insides and see if that would help. Also I don't know much about rooting and stuffs. Lemme know what I should do guys! :highfive:
Click to expand...
Click to collapse
Could be stuck power button. I know, I know, " but its clicking just fine". That doesnt mean anything. Flick the back of your phone a few times.
Sent from my SAMSUNG-SGH-I527 using xda app-developers app
Thats not it
Yeah I read that It might be the problem but Its still happening with the case removed.
Klmnnoooooo said:
Yeah I read that It might be the problem but Its still happening with the case removed.
Click to expand...
Click to collapse
Take out the battery. Insert the battery without touching anything else. Does it just power on itself or does it stay off? If it does turn on, you might have a stuck power button. Let us know what happens
did that too :/
I did that too. It would turn off and on again but only show the Samsung logo then restart again. Also I have the case removed so It cant be the power button being stuck and I have tried the battery thing still nothing.
Whatcha mean? It would turn on by itself once the battery is inserted or you would have to press the power button. Once the battery is out and then inserted back in, it is not supposed to be powered on by itstelf. If it does turn on by itself, then the power button is most likely pressed in.
Yayodroid said:
Whatcha mean? It would turn on by itself once the battery is inserted or you would have to press the power button. Once the battery is out and then inserted back in, it is not supposed to be powered on by itstelf. If it does turn on by itself, then the power button is most likely pressed in.
Click to expand...
Click to collapse
I have a I717 doing the same thing. (Eg. device boots and seems to function for a about 2 minutes locks up and reboots. )
As the device was stock when it started having this issue I figured it might be an OS issue Factory reset to it would leave the device booting to optimize applications then reboot. Checked power button checked it was clean.
Also staied on when in recovery without issue.
As I figured this was an OS issue I installed CWM
Downloaded and installed SlimBeam
Device booted and completed instlation and operated for about 2 minutes and rebooted.
Device will does not have any issues with in CWM or Odin. I
I read alsowhere that the internal SD-Card filesystem might have become corrupted and need to be reformated however I have yet to find instruction or confirmantion.
Anyone have some ideas?
.
to Tal Star.
1. When you were in CWM and were about to flash, did you wipe data/factory reset, wipe cache and dalvik cache then do the flash? Or just flash?
2. So either os it would do the same? Stay on for about two minutes, then reboot? Would it reboot back into the os and do the same?
Yayodroid said:
to Tal Star.
1. When you were in CWM and were about to flash, did you wipe data/factory reset, wipe cache and dalvik cache then do the flash? Or just flash?
2. So either os it would do the same? Stay on for about two minutes, then reboot? Would it reboot back into the os and do the same?
Click to expand...
Click to collapse
Full Wipes every time tried a few diffirent roms no diffirnace.Stock, SlimBean & a couple CM ports.
Tal_Star said:
Full Wipes every time tried a few diffirent roms no diffirnace.Stock, SlimBean & a couple CM ports.
Click to expand...
Click to collapse
So right now you can boot up into the os and it will turn off in 2 minutes? or just given enough time? Will it boot into the os each time? I dont think ill have an answer for it, but i bet someone that does will want to know the same things to possibly narrow it down
Yayodroid said:
So right now you can boot up into the os and it will turn off in 2 minutes? or just given enough time? Will it boot into the os each time? I dont think ill have an answer for it, but i bet someone that does will want to know the same things to possibly narrow it down
Click to expand...
Click to collapse
Naw it starts optimzing the Applications and lasts a few minutes reboots locks up and starts again. SlimBean completes the process and makes it all the way to the launcher but after a same amount of time it reboots. back to the launcher. (Slim bean has a resonable number less Apps and that's why it completes or is my best guess)
Tal_Star said:
Naw it starts optimzing the Applications and lasts a few minutes reboots locks up and starts again. SlimBean completes the process and makes it all the way to the launcher but after a same amount of time it reboots. back to the launcher. (Slim bean has a resonable number less Apps and that's why it completes or is my best guess)
Click to expand...
Click to collapse
I really wouldnt know about that. Hopefully someone will come by and help you out. I wonder being on the latest recovery would help if youre not already and then doing it all over? Hopefully someone more experienced will chime in.
Could be a corrupt download.
Again, I always flash rom 2 times. You can get different reactions from 2 seperate flashes. 2 time seems to get a more solid installation.
Wait your 10 and reboot.
Still think its a power button issue. It can act normal but still be the problem. Hows you battery?
Sent from my SAMSUNG-SGH-I527 using xda app-developers app
HAAAAA I hope some one finds this trouble... having the same issue Here... Does your phone starts up correctly when sim card removed? Mine does when sim card removed and pluged into coputer or wall plug.... Did the same steps you did with no effect either... could it be a power management problem ??? :silly: This is getting me nuts...
captemo said:
Could be a corrupt download.
Again, I always flash rom 2 times. You can get different reactions from 2 seperate flashes. 2 time seems to get a more solid installation.
Wait your 10 and reboot.
Still think its a power button issue. It can act normal but still be the problem. Hows you battery?
Sent from my SAMSUNG-SGH-I527 using xda app-developers app
Click to expand...
Click to collapse
I dobut it's a download. I use CWM to flash from an external SD card. However I did try reflashing like you suggest with no change. The battery is fine as far as I can tell, like I said it will stay online in recovery on battery for what seems like forever.
daversv09 said:
HAAAAA I hope some one finds this trouble... having the same issue Here... Does your phone starts up correctly when sim card removed? Mine does when sim card removed and pluged into coputer or wall plug.... Did the same steps you did with no effect either... could it be a power management problem ??? :silly: This is getting me nuts...
Click to expand...
Click to collapse
Nope I am working on the one I have with the SIM Card out & SD card out.
happens
So what I done so far is taken out the sim and sd card. Took out the battery put it back in and when I power to turn it on It vibrates (like it normaly would when it starts) then shows Samsung logo turns off and loops. I tried doing the hold volume up down power thing and it does not work. But what does work is when I hold volume down it takes me to a custom OS thing. I don't know what that is but I cant get there. So maybe put a custom OS in and then revert it back?
So I used Odin and put 4.1.2 Jelly Bean Official Firmware but its still doing what it was doing before.Used 3.07 and it said it passed fine. Should I try a different rom or something else? Also the first time it starts up after installing the rom it goes past the logo to the ATT ball animation logo freeze there and turns of then when I turn it on from there it will loop at the samsung logo again.
You can try the firmware upgrade and initialization feature in kies. It will return your device to the original factory firmware, software, and settings. If it still loops after that you have hardware issues.
Ok so I guess im making progress now. After I put the stock rom (Different one from befor) It DIDNT BOOT LOOP well it did but only looped 3 times then stoped. Also there are 2 Samsung logos. the frist one was just normal logo ( same one I was having befor ) then the screen turns off and shows the same logo but this time its a little bigger its white with a blue glow! ( Made it further this time but still crashes afterwards) BUT now I can actualy get into the Manual mode. I did a wipe data/factory reset in that mode which didnt help i wiped the cache too. Still didnt help.
Now in manual mode my computer does recognize that something is connected to it now but it tries to configure it and keeps on failing. And so samsun kies cant connect to it either.
But from where I started at its a improvement
My Note is doing the same thing too now, but I know the reason why. I was trying to install clockworkmodrecovery so I would be able to upgrade to jellybean and I think I flashed a kernel that was meant for rooted phones (pretty dumb of me I guess). So now the phone is stuck and I'm going to try to install the original jellybean 4.1.2 for rogers and hopefully that will fix it.
As long as you can get into Odin download mode, your phone can be fixed.

Categories

Resources