Flashing wm 6.5 roms htc hd2 - HD2 Windows Mobile 6.5 Q&A, Help & Troubleshooting

Hi guys im going back to wm 6.5 from android, how would i go about flashing these roms(energy). I have Hspl 2.0, magldr 1.13 and cmw installed. Do i just do it via hspl or do i need a rom manager?

Fasty12 said:
Hi guys im going back to wm 6.5 from android, how would i go about flashing these roms(energy). I have Hspl 2.0, magldr 1.13 and cmw installed. Do i just do it via hspl or do i need a rom manager?
Click to expand...
Click to collapse
The easiest way is via SD Card method.

If your coming from android then you already have an appropriate radio and HSPL installed.
(You can ceck this by entering bootloader, hold vol. on whilst turning the phone on)
To flash a new WM6.5 rom;
Enter Bootloader (vol down + power)
Connect via USB...
Wait for the word "serial" on the bootloader screen to change to "USB"...
Unzip the energy rom and place it in a folder with the custom ruu provided...
Run the custom RUU provided with the energy rom you downloaded...
Wait...
Phone should reboot once flash is complete......
Flashing a 6.5 ROM will remove MAGLDR from your phone.
Make sure you do backups in android in case you want to go back.
Forget about CMW and rom manager.... they are android only.
Hope that helps.

If your coming from android then you already have an appropriate radio and HSPL installed.
(You can ceck this by entering bootloader, hold vol. on whilst turning the phone on)
To flash a new WM6.5 rom;
Enter Bootloader (vol down + power)
Connect via USB...
Wait for the word "serial" on the bootloader screen to change to "USB"...
Unzip the energy rom and place it in a folder with the custom ruu provided...
Run the custom RUU provided with the energy rom you downloaded...
Click to expand...
Click to collapse
i stuck in this step.. it says Error Updating Try Again

my hd2 bricked after updating to official rom
Mr.Cobbra said:
i stuck in this step.. it says Error Updating Try Again
Click to expand...
Click to collapse
i have a big problem with my hd2 usb port was broke not recognizing by any cable usb,i tried to flash official rom via sd card then update error appear what can i do

Related

help...X01HT [email protected] first splash after upgrad to WM6

My X01HT [email protected] first splash after upgrad to WM6
i had flashed a not completed WM6 file....
Bootloader: 1.40 Olipro....
how can i flash another firmware?
goto the unbricking thread, you should be able to reflash a ROM using the SD card method (i think)
mrvanx said:
goto the unbricking thread, you should be able to reflash a ROM using the SD card method (i think)
Click to expand...
Click to collapse
Today I got the same problem after flash a custom ROM with incorrect INITFLASHFILES.DAT.
It's not neccesary to flash from SD. Enter into Bootloader mode (tricolor screen), conect to the PC (active sync will not catch the device) and run RUUwrapper selectign 1.40+Is hard SPL to flash another nbh ROM file.
i had already unbirk it....

Solved-Stuck in Boot Loader, Unable to Flash any Rom, ERROR 294

I by mistake flashed Rom 1.94.710.2 using SD Card, The SPL got overwritten and I am stuck with the boot loader and unable to flash any rom, Error 294.
Also not able to flash using SD card.
Any help is appreciated.
Thank you and best regards
how did the hardSPL get overwritten? I'm new to HTC hacking but isnt that supposed to be impossible?
Try to go into SPL and flash using USB. May be that works. Not sure even
try to download ship rom &flash throught USB cable

how to install radio through usb and card.

how to install radio through usb and card? currently bad rom is installed on my hd2
which is stuck on startup.so want install radio.i got a nbh file.so shoud i put file in card and rename leoimg.nbh or volume down boot and via usb?
dont want again brick my hd2
but there is HSPL.
yousufshah said:
how to install radio through usb and card? currently bad rom is installed on my hd2
which is stuck on startup.so want install radio.i got a nbh file.so shoud i put file in card and rename leoimg.nbh or volume down boot and via usb?
dont want again brick my hd2
but there is HSPL.
Click to expand...
Click to collapse
Firstly you have to have HSPL installed.
You can flash it via sd by putting the radio file into the root of sd card but don't forget to rename it leoimg.nbh. Don't flash radio 2.xx.51.xx if you have Tmous. It will brick ur phone.
You can also flashing it via USB but you need RUU (flashing tools).
Either way you have to be able to go into boot loader mode by way of press vol down and power on buttons at the same time.
Cheers

[Q] Instaling WM via MAGLDR

Is it possible to install wm 6.5 via MAGLDR using USB Flasher?? As now I'm in the situation when I can't enter bootloader (for some reason its not working), I also can't install via mem card as my Clockwork recovery is also not working. Thanks
Sw1pe said:
Is it possible to install wm 6.5 via MAGLDR using USB Flasher?? As now I'm in the situation when I can't enter bootloader (for some reason its not working),
Click to expand...
Click to collapse
No bootloader only.
I also can't install via mem card as my Clockwork recovery is also not working. Thanks
Click to expand...
Click to collapse
again, you need to enter botoloader to flash winmo from sd card, not clockwork. If you cant get into bootloader at all, you can't flash winmo.
I'd have a play with the 'nand toolkit', , perhaps reinstalling magldr will unblock the bootloader.

[Q] please helpppp! bricked my evo!

Hi Everybody,
I unlock the bootloader of my HTC view, I also did install the recovery as
http://forum.xda-developers.com/showthread.php?t=1414137
Then I jumped to install the custom rom (forgot to the S-off first), and I could not! and the existing rom is gone as well.
Now I am restarting into a black screen. I do not have a nandroid backup!
I saw a thread:
http://forum.xda-developers.com/showthread.php?t=1038638
that means I need to install a ruu! but the links are not working, if that is the case, can anybody please provide me with a working link?
Thanks,
I believe you can download a ROM, has to be same android version as the one you were on last, so GB or honeycomb. Copy the boot.IMG from the ROM into the same directory as your fast boot commands
Get into recovery flash ROM
Get into fast boot and
Open cmd on PC
Get to your adb directory
Enter
Fastboot flash boot boot.IMG
Or
Find a ROM that does not have a custom kernel
Or hope someone will upload your ruu
Flyer
If you unlocked your bootloader at htcdev.com you don't need to s-off your device! Just download any custom ROM that meet the requirements of your Flyer, enter into recovery by pressing power and volume down button, wipe everything, copy custom ROM you downloaded into the flashcard and flash it. That's it. Smooth flashing!!!
mcord11758 said:
I believe you can download a ROM, has to be same android version as the one you were on last, so GB or honeycomb. Copy the boot.IMG from the ROM into the same directory as your fast boot commands
Get into recovery flash ROM
Get into fast boot and
Open cmd on PC
Get to your adb directory
Enter
Fastboot flash boot boot.IMG
Or
Find a ROM that does not have a custom kernel
Or hope someone will upload your ruu
Flyer
Click to expand...
Click to collapse
Thanks, it was difficult to find a HC rom! apparently everybody is moving to other devices... I am downloading DesensedView
-2.1.zip hope that works. Thanks for the suggestion. I have been busy with this from yesterday and tried almost everything come into my mind. will let you know if that worked.
Keioboy said:
If you unlocked your bootloader at htcdev.com you don't need to s-off your device! Just download any custom ROM that meet the requirements of your Flyer, enter into recovery by pressing power and volume down button, wipe everything, copy custom ROM you downloaded into the flashcard and flash it. That's it. Smooth flashing!!!
Click to expand...
Click to collapse
Yes, I unlocked it on htcdev.com, and I have two roms (ICS and GC) but none works, after flashing those in recovery, a black screen comes up right after htc logo and nothing happens! I deleted everything, all the cashes and data and flashed these roms, no good, stuck on the black screen. any suggestions? I am even looking for a way to at least go back to my HC!
Thanks
OK. In this case let's try to revert everything back. Make shure what ROM was installed in your device (GB or HC) 1. go to http://htcruu.com/?dir=Flyer_View. 2. Download proper RUU installer. 3. Make Gold Card (just in case if downloaded wrong region RUU). 4. Boot into bootloader and start flashing downloaded RUU.
I am telling you that you can not flash an ICS or CG's JB rom because the boot.img will not flash through recovery with HTC dev unlock. were you on HC or GB prior

Categories

Resources