My X01HT [email protected] first splash after upgrad to WM6
i had flashed a not completed WM6 file....
Bootloader: 1.40 Olipro....
how can i flash another firmware?
goto the unbricking thread, you should be able to reflash a ROM using the SD card method (i think)
mrvanx said:
goto the unbricking thread, you should be able to reflash a ROM using the SD card method (i think)
Click to expand...
Click to collapse
Today I got the same problem after flash a custom ROM with incorrect INITFLASHFILES.DAT.
It's not neccesary to flash from SD. Enter into Bootloader mode (tricolor screen), conect to the PC (active sync will not catch the device) and run RUUwrapper selectign 1.40+Is hard SPL to flash another nbh ROM file.
i had already unbirk it....
I by mistake flashed Rom 1.94.710.2 using SD Card, The SPL got overwritten and I am stuck with the boot loader and unable to flash any rom, Error 294.
Also not able to flash using SD card.
Any help is appreciated.
Thank you and best regards
how did the hardSPL get overwritten? I'm new to HTC hacking but isnt that supposed to be impossible?
Try to go into SPL and flash using USB. May be that works. Not sure even
try to download ship rom &flash throught USB cable
how to install radio through usb and card? currently bad rom is installed on my hd2
which is stuck on startup.so want install radio.i got a nbh file.so shoud i put file in card and rename leoimg.nbh or volume down boot and via usb?
dont want again brick my hd2
but there is HSPL.
yousufshah said:
how to install radio through usb and card? currently bad rom is installed on my hd2
which is stuck on startup.so want install radio.i got a nbh file.so shoud i put file in card and rename leoimg.nbh or volume down boot and via usb?
dont want again brick my hd2
but there is HSPL.
Click to expand...
Click to collapse
Firstly you have to have HSPL installed.
You can flash it via sd by putting the radio file into the root of sd card but don't forget to rename it leoimg.nbh. Don't flash radio 2.xx.51.xx if you have Tmous. It will brick ur phone.
You can also flashing it via USB but you need RUU (flashing tools).
Either way you have to be able to go into boot loader mode by way of press vol down and power on buttons at the same time.
Cheers
Hi guys im going back to wm 6.5 from android, how would i go about flashing these roms(energy). I have Hspl 2.0, magldr 1.13 and cmw installed. Do i just do it via hspl or do i need a rom manager?
Fasty12 said:
Hi guys im going back to wm 6.5 from android, how would i go about flashing these roms(energy). I have Hspl 2.0, magldr 1.13 and cmw installed. Do i just do it via hspl or do i need a rom manager?
Click to expand...
Click to collapse
The easiest way is via SD Card method.
If your coming from android then you already have an appropriate radio and HSPL installed.
(You can ceck this by entering bootloader, hold vol. on whilst turning the phone on)
To flash a new WM6.5 rom;
Enter Bootloader (vol down + power)
Connect via USB...
Wait for the word "serial" on the bootloader screen to change to "USB"...
Unzip the energy rom and place it in a folder with the custom ruu provided...
Run the custom RUU provided with the energy rom you downloaded...
Wait...
Phone should reboot once flash is complete......
Flashing a 6.5 ROM will remove MAGLDR from your phone.
Make sure you do backups in android in case you want to go back.
Forget about CMW and rom manager.... they are android only.
Hope that helps.
If your coming from android then you already have an appropriate radio and HSPL installed.
(You can ceck this by entering bootloader, hold vol. on whilst turning the phone on)
To flash a new WM6.5 rom;
Enter Bootloader (vol down + power)
Connect via USB...
Wait for the word "serial" on the bootloader screen to change to "USB"...
Unzip the energy rom and place it in a folder with the custom ruu provided...
Run the custom RUU provided with the energy rom you downloaded...
Click to expand...
Click to collapse
i stuck in this step.. it says Error Updating Try Again
my hd2 bricked after updating to official rom
Mr.Cobbra said:
i stuck in this step.. it says Error Updating Try Again
Click to expand...
Click to collapse
i have a big problem with my hd2 usb port was broke not recognizing by any cable usb,i tried to flash official rom via sd card then update error appear what can i do
fairly new to rooting, so sorry if the fix is simple (hoping it is). i have a evo 4g lte, rooted it, been having issues flashing cm10, so i would reflash a previously saved working rom, no problems. i have been using twrp for recovery. so i switched to cwmr (HUGE MISTAKE)to try and see if that would somehow fix why everytime i was flashing cm10 my phone would never load past the loading screen ( android in middle of revolving circle). basically my problem is, in recovery i cant mount ext-sd or the internal sd, i can "see" my saved backups, but cant flash them, when i try it says" no files found" i played with things for a while, somehow got some old downloaded cm10 version to work, so i atleast have a working phone, but cant mount my sdcard under storage which i need done to flash twrp back into my phone. ive been reading on how to use termianl emulator to mount sd card, but cant figuer that out, any help would be muchly appreciated, sorry for long description of my issue, i just want to be able to flash twrp, reboot into recovery and restore back to a previously working rom!!! PLEASE HELP!!!!!!!!
also... cm update is constantly running, cant stop it, my pc doesnt recognize my phone, cant mount in recovery or in settings. tried copy and pasting the saved zip files using a root browser app to relocate them and trying to reboot into recovery and flashing them, that does work... please help!!!!
If you can get into terminal emulator, then just flash twrp using that. The directions are on their website.
toolmod francis,
{ParanoiA} said:
If you can get into terminal emulator, then just flash twrp using that. The directions are on their website.
Click to expand...
Click to collapse
too late, i kept playing around with everything in recovery mode, and apprently made things worse, now the phone will recognize my ext sd and not the internal sd, which is what u need to use terminal emulator to reflash twrp, any other suggestions???
You can update recovery image through fastboot or place the twrp update zip (rename PJ75IMG.zip) on external and boot to bootloader. As for internal being corrupt, boot into twrp and mount as USB storage and format through pc
om4 said:
You can update recovery image through fastboot or place the twrp update zip (rename PJ75IMG.zip) on external and boot to bootloader. As for internal being corrupt, boot into twrp and mount as USB storage and format through pc
Click to expand...
Click to collapse
can u give me the detailed instructions on how to do that please
om4 said:
You can update recovery image through fastboot or place the twrp update zip (rename PJ75IMG.zip) on external and boot to bootloader. As for internal being corrupt, boot into twrp and mount as USB storage and format through pc
Click to expand...
Click to collapse
when trying to upload pj75img.zip in recovery from ext sd it says install aborted, it wont take, how do u update recovery image in fastboot
update... cant flash anything, lol. cant access the vfolk folder or whatever under system/etc... to try and make my ext sd my primary source of memory, cant flash twrp in terminal emulator, cant flash anything while in recovery with clockworkmod, cant flash twrp thru goomanager or any other app, cant mount internal sd while in recovery, ANY SUGGESSTIONS people, ive spent literally all weekend researching and still nothing, if someone could call me and walk me thru **** thatd help alot, hell... im to the point to where id mail my phone to someone to let them fix it, haha, please help!!!!!!!
run the ruu and start over again
i had sd card reading issues couple months ago and the ruu fixed it
Miahjera04 said:
when trying to upload pj75img.zip in recovery from ext sd it says install aborted, it wont take, how do u update recovery image in fastboot
Click to expand...
Click to collapse
ADB Tools Mini SDK
Extract this and then open the folder and hold shift+select and right click. In the menu select open command window here. Put your phone in fastboot and connect to pc. Type fastboot devices to make sure its connected. Then type fastboot flash recovery "filename.img" filename being what ever the name of the recovery file is. It should write recovery and then you can boot into twrp
flex360 said:
run the ruu and start over again
i had sd card reading issues couple months ago and the ruu fixed it
Click to expand...
Click to collapse
to run ruu, dont u have to be able to connect to pc? when i do, the pc doesnt recognize, since the internal sd isnt mounted, i cant "mount" my phone to the pc....
Boot to fastboot and run ruu
om4 said:
Boot to fastboot and run ruu
Click to expand...
Click to collapse
so that's plugged into PC to do that right, shouldn't the phone say fastboot usb or something
Boot to bootloader and select fastboot, when you connect to the pc it should say fastboot usb
om4 said:
Boot to bootloader and select fastboot, when you connect to the pc it should say fastboot usb
Click to expand...
Click to collapse
while in fastboot i cant get it to say fastboot usb sometimes, but when i run ruu, it says it cant detect my phone, so no luck there... it says usb connection error: 170
om4 said:
ADB Tools Mini SDK
Extract this and then open the folder and hold shift+select and right click. In the menu select open command window here. Put your phone in fastboot and connect to pc. Type fastboot devices to make sure its connected. Then type fastboot flash recovery "filename.img" filename being what ever the name of the recovery file is. It should write recovery and then you can boot into twrp
Click to expand...
Click to collapse
after unziping the folder and trying to run that program i get system error saying its missing a .dll file
You probably need to reinstall HTC drivers
om4 said:
Boot to fastboot and run ruu
Click to expand...
Click to collapse
ok, i atleast got ruu to take, then phoen reboots the bootloader, erases user data, then just stays on sending for about 30-45 secs, then the program stops and says unknown error and to find rom compatible with phone, im using ruu 2.13 which looks to be the newest one... : (
om4 said:
You probably need to reinstall HTC drivers
Click to expand...
Click to collapse
i reinstalled 1000 times. lol.... im currently working on getting adb prompt to work, downloaded the neccesary java stuff, but cant get the prompt to open, been reading about having to relocate java files, and stuff, but havin dificulty... hoping that if i can get into an emulator on the pc i can force flash twrp or something, anyone know how to help with that?
FINALLY FIXED!!!!!! had to relock bootloader for the ruu to take, smh... such an easy thing to over look, but got back to factory rom.. bot to root again, lol... BIG LESSON LEARNED, thanks for all help