Hello,
I have DCD 3.0.4 and Radio 3.42.50 on my xv6800. This setup connects to my car via bluetooth for audio and phone. However, when I walk away from my car and break the bluetooth connection, my phone volume is "off" and I am no longer aware of incomming calls. I always have to remember to put my volume control back to "on" after I walk away from my car.
Does anyone know of a fix for this?
Related
Hi,
I use my iMate Startrek with a set of a2dp headphones (the iMuffs), and I have to manually tell the phone to connect to the iMuffs using a2dp through the "Set as wireless stereo" option in the settings, can this be done automatically?
Another thing is that if I get a call while listening to music, the microphone on the headset doesnt work very well, and I have to shout for the person to hear me. I think that the mic in the headset is not being used. Has anybody had this problem and solved it?
Does anyone know if there are some registry settings that need to be tweaked to get these problems solved?
Thanks a lot.
I use an itech s38 and doesn't have a problem with the mic.
I do have problems with automatic connections.
after setting up properly, if the headset gets disconnected,
the next time it reconnects by itself is always on the headset profile
and mostly only connects if i make a call
So even when no indicator is shown I would assume that seconds
before ther call is answered the sound would be transfered to the headset
that's not so much of a problem
what really sickens me is that if i wanted to
listen to music via the headset when headset profile is connected
i would have to
1.hit the stick once to go to comm manager
2.hit "2" to turn off BT
3.exit to make sure action is done
4.hit center to go to comm manager again
5.hit "2" turn it on (making sure it doesn'ty connects to headset profile first)
6.hit Settings to go to BT settings (hit one or enter to getto that's two presses)
4.hit menu
5.hit devices
6.hit menu
7.hit set as wireless stereo
8.hit done
9.hit done again
10.hit exit
11.hit start
12.hit windows media
13.mess another big while in windows media playlists
..........
now that's too much ... many places i could use the home button
to exit quickly .. that's not what's frustating
what i need actually is a shortcut to the BT devices page
and a smarter profile to connect to wireless stereo for me
without having to turn off headset profile first
I am using HP Stereo Bluetooth headset with my QTEK 8500. It works fine besides the reconnection. If I turn the headset off in order to reconnect I have to go to the BT settings and set the headset to Stereo Headset again. I beleive your problem ocurs because your headset is also a handsfree headset, which HP is not.
I do beleive this behaviour is by design. Although I do not seen to understand the logic behind it.
Hi, who has problems with his Bluetooth headset after the WM6 upgrade?
My Bluetooth headset used to start looking (by beeping) for the last connected device when I power it on. It doesn't do that while paired with my X7500 WM6. It does start looking MANUALLY when I press the call button on the headset and when it's connected (you see the headphones icon in the phone screen appear), it only stays that way for a few seconds. The headphones will disappear again and the connection has been lost.
When I then push the headset call button again, it starts looking again, connects again, and then disconnects again after a few seconds.
I first thought it was the headset, but it works just fine on all other devices I have, but just not the X7500 anymore. I'm sure it has something to do with the WM6 upgrade, because it was working the proper way while running WM5.
Any tips or suggestions??
The icon disapears, but calls still go through to it when they come in for me.
Have you checked to make sure it doesnt actualy work when an incoming call arrives? the icon is misleading.
No, the connection is lost when the icon has been disappeared, because the headset will start reconnecting/looking for the device when I press the headset call button.
If it was still connected it should initiate the voice speed dial.
strange, i have many headsets and dont have that problem with any.
I do have it randomly stop talking to the headset at all, and require a delete/repair, (one headset still wont connect, but i think its a crap headset issue). but when paired, they normaly behave afterwards.
Im on wm6 btw.
BUMP. This has been happening for me since my WM6 upgrade.
HBH-PV720
AMEO with HTC WM6
Please can anyone can help with this ?
DiGRem
Delete and pair
I have had issues with several Nokia phones when upgrading firmware. The other bluetooth units, previously paired with the phone, still thinks that they should be paired after the upgrade. Only issue is that the phone has totaly forgotten of all paired devices. This resulted in many connection errors, when the peripherals wanted to connect, but the phone refused. Can you somehow reset the headset? Delete the pairing on the phone, pair the headset with another phone/pc, and then, re-pair it with the athena again. Just to make sure that it has no old pairing info.
-Johan
Hello,
I've got a strange problem.
I connect the phone with my A2DP receiver in my car. The car audio has the function to switch automaticly to source A2DP if there is a signal.
On first connect everything works fine, bun on reconnect (leave the car, come back and reconnect) the phone sends a very low noise so that the car audio switches to A2DP.
There is no player running on the phone.
Samsung voice to go and vlingo or similar are not installed (I hear the same noise when vlingo is in listening mode).
When I start a player, start music and stop again, the noise is gone and the car audio swiches back to radio.
If I use a MW600 instead I can hear the noise too, when I turn the volume up.
I had the issue with Stock KI4 and now with CheckROM V6 too.
Did someone noticed this noise too? I there something I can do?
thanks
Andre
Droid RAZR Maxx, stock ROM, rooted.
I recently installed an Alpine CDE-HD137BT stereo in my car, which has quite a bit of bluetooth functionality. However, I do have quite a few issues connecting my Razr's BT with the Alpine.
-Sometimes the BT icon on the stereo will light up, and the BT icon on the RAZR will turn blue, indicating that they are paired. However, even though they showing as being paired and connected, it occassionally won't play any audio through the stereo (in fact, the audio will play through the RAZR's speaker). This some times happens with CALLS as well.
-Sometimes the two devices will connect fine, which then automatically causes my phone to start playing music from whatever music app was being used last; the music will play fine through the car stereo's speakers for maybe 20 seconds, followed by a shrill, loud, high frequency tone that only goes away by switching the source or by turning the radio off/on (by turning the car off/on).
-Sometimes the phone will pair perfectly to the stereo, and I make a call before listening to any music. The call is executed beautifully, but then following the call, audio will not stream through the stereo, nor will any subsequent calls work via bluetooth.
-(known problem) the specific Pandora fucntions on the stereo do not seem to work with this device.
Anyone else have the above issues? If so, what did you do to remedy them?
Thanks in advance!
never had those problems before but I now how pissy bluetooth between phones and radios can be, I had a pioneer AVIC D-3 with the BTB-200 bluetooth module. When I first got it I had to manually pair it each time and the problem was that when setting up the pairing I had to have the radio discover the phone instead of the phone discovering the radio or vice versa I can't remember but that solved almost all of the problems I had then, every once in a blue moon my current radio doesn't auto pair, but its not a huge deal as this one doesn't do A2DP audio streaming it only does the Hand Free Profile and text message alerts.
Hi, I have a problem with my Mate 10 Pro. Every time I use my car's Bluetooth, I can't hear voice on incoming calls unless I switch to the phone speaker and then again to the Bluetooth system. The same goes for music as sometimes it switches randomly to the phone speaker and then I have to disconnect a2dp in my car and connect again. This is really annoying and frustrating. Any ideas how to solve this? Never had any Bluetooth problems with my previous phones.