Related
Is there a good resource/thread for learning more about using SetCPU? I just flashed nerov3 and im wondering if it'd be beneficial to install it. Not sure if its neccesary or compatible... etc. How does one even know how much is safe to over and underclock?
Vibrant, NeroV3, JL5, Voodoo...
With having nero v3 installed, you can't OC it because we don't have vibrant's froyo source code yet but we do have I9000's. You could use one of those kernels to oc/uc. Nero is speedy w/ voodoo anyways so you don't REALLY need it, if u want to use setCPU to uc you can. Underclocking i would recommend min100 max800 set scaling to conservative, which will automatically clock cpu to compensate for usage. (Just my 2cents, listen or don't its your choice)
I would highly recommend SetCPU with Nero V3 or any Rom for that matter. I know for some, It is just personal preference. For me, I run my phone at 800mhz max and 200mhz min. Gives me awesome speed, with voodoo there isn't really any lag. I'm basically reiterating what ucantak3dis has said, So until there is an OC kernel. Which I'm not sure if som and/or viral have plans for. I would stick with what you've got in addition with SetCPU. You'll get great battery life out of it! Enjoy.
Thanks for the feedback guys. I installed it and im running at 200 min, 800 max (set on boot).
What exactly does that mean?
Also, I've read people talk about underclocking when the phone is asleep to save battery. Do I need to create a profile to do that?
Vibrant, NeroV3, JL5, Voodoo...
trunkstar1 said:
Thanks for the feedback guys. I installed it and im running at 200 min, 800 max (set on boot).
What exactly does that mean?
Also, I've read people talk about underclocking when the phone is asleep to save battery. Do I need to create a profile to do that?
Vibrant, NeroV3, JL5, Voodoo...
Click to expand...
Click to collapse
It means that those values are SET on boot of your device. Your phone will run anywhere between 200 mhz and 800 mhz and ramp up to a max of 800 mhz (conservatively) when necessary. Versus, Without SetCPU your phone would constantly be running at 1Ghz. You can create profiles for doing such things to save battery while the screen is locked, I have had issues with my phone NOT being able to wake though. So, try this at your own risk.
Personally, i wouldn't recommend having the set on boot checked because it caused problems w/ some ppl. I did that once and when i rebooted, it froze on the vibrant screen. idk if that's been fixed but just having setCPU set at the values you want is fine i think. Profiles aren't necessary unless your overclocking the cpu.
im running the extreme1.92x kernel oc'd at 1.4 but not sure about the best setup to save battery. i made one profile for charging i put in on max. not sure what to do with the advanced tab settings.
Profiles are really dependent on the user and their needs. The one piece of advice I can give you is to make sure you have a profile set up in case your phone starts to over heat. An OC'ed phone maxed during a charge may get quite toasty.
any suggestions?
Imo dont o/c. Let the kernel operate the way it is setup. O/c cause reboots, phone heating up, and freezes.
Sent from my ADR6400L using XDA App
I'm running Adrynalyne's 4.4.7 kernel and use the following and get really good battery life with no overheating and no lag. I don't do a screen of profile because the governor seems to handle that pretty well.
Normal 1024 max 245 min-Smartass governor
Profiles:
Battery < 25% 768 max 245 min-On demand Governor
Charging 1280 Max 245 min-Smartass governor
itsDollar said:
Profiles:
Battery < 25% 768 max 245 min-On demand Governor
Charging 1280 Max 245 min-Smartass governor
Click to expand...
Click to collapse
Does that actually work?
I thought you had to choose a default governor and setup profiles accordingly.
I didn't know you could setup profiles with a governor that wasn't active or chosen on boot.
the thunderbolt is so fast already theres really no need to over clock. i left it at stock for normal, toned down to 768 when <30% battery and down to 368 when screen off. its a little slow for about half a second when waking up but the battery life is amazing. i can make it through a whole day without charging with moderate use. also running ziggys bfs kernel on virusrom and that added a ton of speed. way better than overclocking that drains your battery
im not asking about overclocking or profiles, just want to know about advanced settings. everything is set to default -1.
qman66 said:
im running the extreme1.92x kernel oc'd at 1.4 but not sure about the best setup to save battery. i made one profile for charging i put in on max. not sure what to do with the advanced tab settings.
Click to expand...
Click to collapse
What Rom are you using?
Go to settings, menu, wireless networks, mobile networks and uncheck the third box. No need to have mobile data always on for most peeps . You'll still have 4G n everything, but gain a good 1-2 maybe more hrs (depending on use, kernels, governor settings, and I/O scheduling. I personally am running BAMF 1.6.2 with adryns 4.4.7 kernel, no set CPU, using tool box for that at 245mhz min - 1.024GHz max with ondemand governor and most importantly SIO Scheduler. Try these n you will have amazing performance and better battery life. Let me know you opinions
Sent from my ADR6400L using XDA Premium App
No matter how precise I click, I can't get SetCPU to set 1024mhz. Closest I can get is 1036. What gives? lol
sprodigy said:
No matter how precise I click, I can't get SetCPU to set 1024mhz. Closest I can get is 1036. What gives? lol
Click to expand...
Click to collapse
Haha, I couldn't tell if you were being serious or not but each kernel has speeds at different increments. 1036 will probably be as close as you can get to 1024.
dopediculous said:
What Rom are you using?
I personally am running BAMF 1.6.2 with adryns 4.4.7 kernel, no set CPU, using tool box for that at 245mhz min - 1.024GHz max with ondemand governor and most importantly SIO Scheduler. Try these n you will have amazing performance and better battery life. Let me know you opinions
Sent from my ADR6400L using XDA Premium App
Click to expand...
Click to collapse
My settings are identical except running 1.6.3, what does the SIO scheduler do or any of the schedulers for that matter?
mrsmith35sg said:
My settings are identical except running 1.6.3, what does the SIO scheduler do or any of the schedulers for that matter?
Click to expand...
Click to collapse
You can use Wikipedia for the scheduler info. Once you look into it you'll know why I didn't wanna type all those details in here from my phone. Lol, but yeah set that to SIO, Take off ENABLE data always on. N you should be better let me know.
Sent from my ADR6400L using XDA Premium App
rdompor said:
Haha, I couldn't tell if you were being serious or not but each kernel has speeds at different increments. 1036 will probably be as close as you can get to 1024.
Click to expand...
Click to collapse
Go to manage applications and clear data from set CPU and when u go back in to set CPU you will have to hit auto detect n if ur kernel has that frequency you'll be able to click it.
Sent from my ADR6400L using XDA Premium App
Samsung Fascinate CDMA
Rooted MIUI 1.9.16
Did a brief search here looking to understand how to operate overclocking kernals, but find it/me relatively limited.
I have installed and ran Glitch v11 and v12, played around with HL to LL, and made adjustments to undervoltage utilizing Pimp My CPU and Voltage Control. I have also ran Tweak (though not really a kernal).
My question is this,
am I overclocking when I reduce voltage on Mhz's above 1,000?
If not, could someone point me to, or explain how to achieve overclocking on our phones, and
which kernel and governor do you prefer for overclocking?
As an ammended note, I've installed Tegrak Overclock, but am still looking for a user guide...
Thank you for your time.
If you're the running the glitch kernel...use voltage control, not tegrak overclock...over clocking is when you turn the CPU speed above its normal speed..anything over 1GHz.
under volting is when you turn down the voltage frequency to achieve better battery life...
Any one clock speed may perform more or less stable with different under volting unfortunately all of our phones will vary in performance so one setting that works for one may not be the best for another so experimentation is really the best option...this applies for schedulers and governors as well.
I personally overclock as high as I can until it freezes or crashes..then I go 1 setting down...I then try undervolting different steps observing the stability of my phone...when I find what I like,I run it for a few days, then if its still nice and stable I will apply on boot.
The different leakage values are affected by the hardware quality of the chips in our phones which also vary..I start with high and see how high I can overclock..note the setting, then try medium..see how high I can overclock and so on...just as a reference..high leakage creates the most heat and is the least efficient, but works for most phones, while low leakage is the most efficient and generates the least heat and will work with not as many phones
Sent from my SCH-I500 using XDA App
efan450 said:
If you're the running the glitch kernel...use voltage control, not tegrak overclock...over clocking is when you turn the CPU speed above its normal speed..anything over 1GHz.
under volting is when you turn down the voltage frequency to achieve better battery life...
Any one clock speed may perform more or less stable with different under volting unfortunately all of our phones will vary in performance so one setting that works for one may not be the best for another so experimentation is really the best option...this applies for schedulers and governors as well.
I personally overclock as high as I can until it freezes or crashes..then I go 1 setting down...I then try undervolting different steps observing the stability of my phone...when I find what I like,I run it for a few days, then if its still nice and stable I will apply on boot.
The different leakage values are affected by the hardware quality of the chips in our phones which also vary..I start with high and see how high I can overclock..note the setting, then try medium..see how high I can overclock and so on...just as a reference..high leakage creates the most heat and is the least efficient, but works for most phones, while low leakage is the most efficient and generates the least heat and will work with not as many phones
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Efan450,
Thanks.
How do you over-clock using Glitch and Voltage Control? I see that Voltage Control goes up to 1,300Mhz, but it's at 0 above 1,000Mhz and can be dropped down to -200mV. Is overclocking just the process of decreasing that voltage on Mhz's above 1,000Mhz's
FJRSport said:
Efan450,
Thanks.
How do you over-clock using Glitch and Voltage Control? I see that Voltage Control goes up to 1,300Mhz, but it's at 0 above 1,000Mhz and can be dropped down to -200mV. Is overclocking just the process of decreasing that voltage on Mhz's above 1,000Mhz's
Click to expand...
Click to collapse
come on man.. Clock speed (mhz) and undervolting are 2 completely different things.. Forget the voltage.. No changing the voltage is NOT overclocking.. You overclock by changing your maximum clock above 1000mhz which is stock for this phone.. Try long pressing 1200mhz and selecting set as max.. Now your overclocked to 1200mhz..
Sent from the fascinate that holds the record benchmark on antutu
No decreasing the voltage is simply undervolting whether it's over 1000 or under. The idea behind undervolting is increasing battery life, but you can't necessarily go and set each level to the maximum undervolt (200) you half to see what works. Increasing the processor speed is overclocking, stock speed is 1000 so anything over that is over clocked. As far as how far as how far you can over clock depends mostly on 2 things, 1. the kernel your using, ( for example if it shows 1300 in the list that means thats all that specific kernel supports) 2. It varys greatly between phones. For example with glitch you can overclock to 1700 but very few phones can run that high for longer than a few minutes!
Hope that helps.
Sent from my SCH-I500 using xda premium
Yes.. And the fact you say your running glitch and your max oc is only 1300 my guess is you broke your kernel with tegrak overclocks module.. Delete tegrak and stop downloading overclock apps. or any other root app unless you know fully the consequences first.. If after deleting tegrak, and rebooting, if your voltage control don't show a maximum clock of 1700 mhz, then you will need to reflash your glitch kernel
Sent from the fascinate that holds the record benchmark on antutu
Neh4pres,
Yeah, I kind of feel like a heel. For some reason, I had a brain fart when looking in the 'General' section of Voltage Control. I see now how to overclock.
Regarding ost #6:
When I flashed MIUI 1.9.16, I did not install any kernel; so it was kind of a half truth in that while running 1.9.9 I did have Glitch installd. Nevertheless, I still have Voltage Control installed.
mkropf,
I see that now, and thought as such earlier, but needed some clarification.
Having so many issues with Glitch and 1.9.9, I'm hesitant to install Glitch, but interested to see if it runs better on the newer MIUI...
Thank you two for answering my newbie questions.
FJRSport said:
Neh4pres,
Yeah, I kind of feel like a heel. For some reason, I had a brain fart when looking in the 'General' section of Voltage Control. I see now how to overclock.
Regarding ost #6:
When I flashed MIUI 1.9.16, I did not install any kernel; so it was kind of a half truth in that while running 1.9.9 I did have Glitch installd. Nevertheless, I still have Voltage Control installed.
mkropf,
I see that now, and thought as such earlier, but needed some clarification.
Having so many issues with Glitch and 1.9.9, I'm hesitant to install Glitch, but interested to see if it runs better on the newer MIUI...
Thank you two for answering my newbie questions.
Click to expand...
Click to collapse
There are no issues with glitch.. It is what I run.. Very smooth.. Just have to give your phone time to adjust and build cache
Sent from the fascinate that holds the record benchmark on antutu
Landscape
Re-installed Glitch v12 ML last night and have it overclocked @ 1,200 with no under-voltage...yet. Want to see any adverse effects.
I started at 1,300 and it locked up then rebooted within 5 minutes.
A concern I have is that now my phone will not Auto Rotate to Landscape even though I have Auto-Rotate 'on' in Settings.
I've scoured Sixstrings Glitch thread to no avail. Though it's not needed anymore, I also flashed the cleaning script just to see if it would make a difference.
Is there a work around or fix for this?
Make sure you're on the latest 9/15 version of the kernel. Anything before that will kill all of your phone's sensors.
http://forum.xda-developers.com/showthread.php?t=1252871
sageDieu said:
Make sure you're on the latest 9/15 version of the kernel. Anything before that will kill all of your phone's sensors.
http://forum.xda-developers.com/showthread.php?t=1252871
Click to expand...
Click to collapse
That was it. I had re-installed the older Glitch v12 that was already on my PC. Deleted them and downloaded the newer Glitch kernels to experiment with.
Thanks!
FJRSport said:
Re-installed Glitch v12 ML last night and have it overclocked @ 1,200 with no under-voltage...yet. Want to see any adverse effects.
I started at 1,300 and it locked up then rebooted within 5 minutes.
A concern I have is that now my phone will not Auto Rotate to Landscape even though I have Auto-Rotate 'on' in Settings.
I've scoured Sixstrings Glitch thread to no avail. Though it's not needed anymore, I also flashed the cleaning script just to see if it would make a difference.
Is there a work around or fix for this?
Click to expand...
Click to collapse
under volting helps stability.. I use -50 for everything above 1ghz.. Your phone may vary
Sent from the fascinate that holds the record benchmark on antutu
OC & UV settings
neh4pres said:
under volting helps stability.. I use -50 for everything above 1ghz.. Your phone may vary
Sent from the fascinate that holds the record benchmark on antutu
Click to expand...
Click to collapse
Yeah, locking and rebooting was while using the older version of Glitch v12. With the 9/15 dated Glitch I'm at 1300 now with the following settings:
Deadline / ondemand
200 - 1300
1300 -25
1200 -25
1000 -50
800 -50
400 -75
200 -75
1.2GHz is the best I say if you want good battery with a higher frequency. 1.4GHz is the best for anyone who uses their phone alot. Samsung did add 1.2GHz overclock in their source.
Sent from my SCH-I500 using XDA App
Back to running MIUI without Glitch.
Things that make you go, Hmmm?
For some reason, every time I accessed the keyboard for Google+, it hung, then froze, and 3 of the four times rebooted. The fourth time I needed to remove the battery to reboot. So I re-flashed MIUI 1.9.16 (effectively removing Glitch) and have 0 problems.
Bummer, I like Glitch too.
I'm in the same boat, however they redone the latest glitch merge and posted it last night so I'm thinking we'll be back in good times
Sent from the most custom, custom rom Miui 1.9.16 and currently the best kernel Jt
mkropf said:
I'm in the same boat, however they redone the latest glitch merge and posted it last night so I'm thinking we'll be back in good times
Sent from the most custom, custom rom Miui 1.9.16 and currently the best kernel Jt
Click to expand...
Click to collapse
are you using JT's 9/12 kernel?
if so...did you overclock it?
i'm on jt's 9/12 with miui 1.9.16 and wondering if I can / should overclock and undervolt it. I'm just trying to maximize battery life at this point.
Try the new glitch posted last night, it is fantastic.
Sent from my MIUI SCH-i500
sageDieu said:
Try the new glitch posted last night, it is fantastic.
Sent from my MIUI SCH-i500
Click to expand...
Click to collapse
what voltages are you running?
also for anyone..
is there any way to directly compare two kernels? like a test or something?
I can't decide between JT's 9/12 and the new glitch..
worshipNtribute said:
what voltages are you running?
also for anyone..
is there any way to directly compare two kernels? like a test or something?
I can't decide between JT's 9/12 and the new glitch..
Click to expand...
Click to collapse
You wouldn't want to use my voltages, I put everything way lower than anybody else does or recommends and am just lucky that it is stable for me but it causes the sleep of death for anyone else.
For comparison, just run JT's kernel for a bit and then flash glitch and try it... once you play with OC/UV and voodoo color you won't be able to go back. (you'll be able to but you'd have to be insane.)
Okay, I looked at what ziggy and cron247 did over on XDA and tried to make it better.
This kernel is unsecured, meaning adb connects with root.
It OverClock's up to 1.836MHz.
It has the SmartAss V2 governor.
It uses my ramdisk, not the one you have. I cannot forsee this being an issue. If it becomes one, let me know.
Updates:
Version 1.1.3 changes the version of lagfree, the old one was having issues. Also removes forcing the second CPU to be online which was causing choppiness.
Version 1.1.2 adds increased read ahead, writeback tweaks, decreased dirty ratio settings, simple I/O scheduler, and the lagfree governor.
Version 1.0.5 adds mpdecision fix by Mr X, thank you whoever you are, if you removed mpdecision, put it back. Also added voltage control for you UV lovers.
The only control program I have tested to work is AnTuTu CPU Master (Free), I have had issues with SetCPU and a few others. This one does speed, governor, and voltage all very well.
Get it here: AnTuTu CPU Master (Free)
The following problems seem to be fixed at this point: governor and speed settings not sticking, smartass staying at top speed, random reboots or bootloops overnight.
READ THE INSTRUCTIONS, THIS IS A SINGLE FILE
To install this kernel:
Copy the file to the root of your SDcard.
Reboot into recovery (CWR or AmonRa).
Flash the file from the SDcard.
At the end of the flash the phone will reboot to fastboot.
Once fastboot loads, tap PWR to get to HBOOT.
HBOOT will find the update and ask you to install.
Tap Vol Up to begin the install.
When it finishes it will say tap PWR to reboot. Do it.
After the phone boots remove the PH98IMG.zip file from your SDcard.
Use AnTuTu CPU Master (Free) to set min/max/gov/voltage.
Enjoy!
Thanks to ziggy and con247 for getting us started and having stuff out there for me to get ideas from.
Download:
Link: dsb9938 Kernel 1.1.3
MD5: a2558e70f9af572f43e258c9aedb4b40
Source on GitHub.
My favorite Rezound kernel so far. Haven't had one crash, even at max OC. Thanks so much guys at BAMF!
This kernel has been good to me too.
I just wish I could get a handle on thie weird issue. Any of these other than stock kernels seem to have the minimum cpu speed jump up to the max cpu speed, then back down constantly, and I cant figure out the deal.
I can check on mine periodically and my min says 192, than a couple seconds later it says its the same as my max. Ugh.
dccoh said:
This kernel has been good to me too.
I just wish I could get a handle on thie weird issue. Any of these other than stock kernels seem to have the minimum cpu speed jump up to the max cpu speed, then back down constantly, and I cant figure out the deal.
I can check on mine periodically and my min says 192, than a couple seconds later it says its the same as my max. Ugh.
Click to expand...
Click to collapse
I noticed that as well
I also had a problem yesterday morning where my phone locked up when my alarm clock went off - forcing me to pull the battery to turn the sound off - not sure if that's kernel or ROM related (running CleanROM 1.5)
Argent36 said:
I noticed that as well
I also had a problem yesterday morning where my phone locked up when my alarm clock went off - forcing me to pull the battery to turn the sound off - not sure if that's kernel or ROM related (running CleanROM 1.5)
Click to expand...
Click to collapse
It's kernel related; I'm running rezrom and had the same exact issue with my alarm running this kernel.
Do you think ziggys is more stable?.. or do I just need to find the right overclock/underclock settings?
I seem to recall seeing them have that problem on ziggy's - but I never had that problem on earlier versions of dsb's - so maybe it's just something that is fixable for the next release
*wanders off to test it again*
This is no doubt me doing things wrong that led to this, but I downloaded the kernel through the phone browser, then flashed it from the download directory on the internal SD. When I flashed Incredikernel from there it copied the PH98 to the sdcard, but no dice on this kernel until I copied it to the sdcard then flashed it.
I probably should have copied it to the sd card myself first anyway, but I figured I would let you know!
Well this morning - my alarm clock went off - I was able to snooze it - and then a few minutes later the phone went in to boot loops - had been running stable all weekend - once I pulled the battery the phone booted back up just fine.
we'll see if it repeats this behavior tomorrow morning or not...
Call recording support in the kernel?
timp123 said:
Call recording support in the kernel?
Click to expand...
Click to collapse
Nope, only Ziggy's kernel currently supports this.
I only set one alarm at a time usually, but I have one set to go off every morning at 7:30 & it has worked perfectly everyday for a few weeks now.
~John
Curious to see what settings people are using (min/max) as well as voltage control to get best battery life. Downloaded the CPU Master Free and wanted to set it up. Thanks
sandman_nyc_316 said:
Curious to see what settings people are using (min/max) as well as voltage control to get best battery life. Downloaded the CPU Master Free and wanted to set it up. Thanks
Click to expand...
Click to collapse
My default setting is 384 - 1512. I have a charging profile that OC's slightly to 1620. I also have profiles for a hot battery (which I have never had) and power under 20% which UC to 1296 and 1060 respectively. I use sio for scheduler (although that tends not to stick). My minimum UC is 384, nothing lower (I've read of bootloop issues with lower frequencies on the Incredible).
I undervolt everything from 384 to 1404 by -50; and 1512 by 25. Everything else is default.
I have never had a crash or reboot with this kernel on stock ROM.
hgoldner said:
My default setting is 384 - 1512. I have a charging profile that OC's slightly to 1620. I also have profiles for a hot battery (which I have never had) and power under 20% which UC to 1296 and 1060 respectively. I use sio for scheduler (although that tends not to stick). My minimum UC is 384, nothing lower (I've read of bootloop issues with lower frequencies on the Incredible).
I undervolt everything from 384 to 1404 by -50; and 1512 by 25. Everything else is default.
I have never had a crash or reboot with this kernel on stock ROM.
Click to expand...
Click to collapse
Thanks! How's your battery life been with those settings?
sandman_nyc_316 said:
Thanks! How's your battery life been with those settings?
Click to expand...
Click to collapse
Decent. I can get 10 solid hours or more of moderate use when I cannot be near a charger. I can stretch it further by turning off LTE and background data. Heavy data use tends to be the biggest killer. I keep my display at 30%, too, and use smartass v.2 as default.
hgoldner said:
Decent. I can get 10 solid hours or more of moderate use when I cannot be near a charger. I can stretch it further by turning off LTE and background data. Heavy data use tends to be the biggest killer. I keep my display at 30%, too, and use smartass v.2 as default.
Click to expand...
Click to collapse
Appreciate it. Gonna see what happens. Will update with my results. Thanks again!
I wonder what is causing all these boot loops for us all. Do you guys think it's the voltage? Perhaps the software?
zetsumeikuro said:
I wonder what is causing all these boot loops for us all. Do you guys think it's the voltage? Perhaps the software?
Click to expand...
Click to collapse
Good question. I haven't had a single bootloop since flashing this kernel after coming from Ziggy's. Been running this 192min/183max and UV'd -75 across the board and running great.
Hopefully I don't jinx myself.
Guys with bootloops/lockups...are you running any profiles?
Make sure you do a dalvik cache wipe....
Ziggy's would always lock up on me (multiple times per day) so I gave up on it. The only problem I have with this on (and this was a problem with Ziggy's too) is the min jumping to max.
My frequencies bounce on this kernel. It spends about equal time between the highest setting, and lowest setting. It works great other than that. My question is this bad for my CPU? I get great battery life, and performance, just scared the bouncing could be bad for the processor. Any help would be great.....
Sent from my ADR6425LVW using Tapatalk
Every ROM I've tried on T959 (Vibrant) seems to lag or lock up.
What are the best ROM's that won't lag or lock up my phone?
PuritanHope said:
Every ROM I've tried on T959 (Vibrant) seems to lag or lock up.
What are the best ROM's that won't lag or lock up my phone?
Click to expand...
Click to collapse
O-o that's very odd...which roms have you used exactly? Have you stayed mostly with froyo roms? GB roms or ICS?
Also- what kind of settings do you use? Governors and schedulers? frequencies? Do you OC or UV? Etc. Etc.
Xenoism said:
O-o that's very odd...which roms have you used exactly? Have you stayed mostly with froyo roms? GB roms or ICS?
Also- what kind of settings do you use? Governors and schedulers? frequencies? Do you OC or UV? Etc. Etc.
Click to expand...
Click to collapse
I've stayed mostly with the ICS roms.
No governors/schedulers whatever...nothing else on top of the ROM.
ICZen with sub-Zero's kernel was always my favorite ICS build, but you're going to have to accept some kinks when you're running ROM that's been ported over for a device that had official support stop at 2.2. Just be sure to pick a ROM that has some active development. And despite how good a lot of the ICS ROMs are for the Vibrant I don't know if the hardware is going to give you a completely lag-free experience 100% of the time; especially with multitasking (at least from my experience).
You can try to address the lag by changing your CPU Governor to something like ondemand or scary since those will ramp up the CPU clocks to your max frequency the fastest. Smartass and smartass v2 try to balance performance vs battery and were the usual defaults from when I was testing ICZen, but I always found it better to just go for broke since I'm just looking for a full 18 hours off a charge.
Another thing to try is tinkering with the number of apps the system will keep in memory. Try setting it low (3 or 4) if you're experiencing unusual lag.
PuritanHope said:
I've stayed mostly with the ICS roms.
No governors/schedulers whatever...nothing else on top of the ROM.
Click to expand...
Click to collapse
Well, no matter what...your rom is going to have a certain scheduler and governor set...same with cpu frequencies.
If you haven't changed them at all, then you are running on the default that the rom creator set it to...or if you flashed another kernel on top of the rom, then you are running the kernel creator's default. I'd suggest, the person above me suggested...going with ICzen with subzero or devil...then I would suggest downloading NStools free from the market place and experimenting a little with the governors and schedulers....
some good schedulars are: sio, vr, deadline, or noop
and some good governors are: smartassv2, lulzactive, lagfree (if that's what you're going for)
...personally...to avoid lag and get good battery, I go with a modified conservative governor with a slightly higher max frequency of 1200 normally and 1300 if i'm playing a very taxing game like idk,...dungeon defenders or something.
Now, you'll definitely experience better performance by chancing the governor and max frequency.
For reference go here: http://forum.xda-developers.com/showthread.php?t=1420742
and to see what I meant when I said that I "modified" the conservative governor to fit my needs...
go here: http://forum.xda-developers.com/showthread.php?t=1369817
If you have any question, just ask! But I really think that your lag will go away once you become more familiar with tweaking the settings to run smooth.
If you are really interested in tweaking your phone a bit more than this however...
you can also try running this: http://forum.xda-developers.com/showthread.php?t=991276/
with the free app "script manager" from the market. It's definitely worth it in my opinion.
Good luck!
PuritanHope said:
Every ROM I've tried on T959 (Vibrant) seems to lag or lock up.
What are the best ROM's that won't lag or lock up my phone?
Click to expand...
Click to collapse
i'm running FE's CM10 jb preview. disclaimer: it's still in alpha. everything works for me; gps is so-so.
the kernal i have is devil3 1.0.4test3 found here. the governor is set to smartassv2 with min of 200 and max of 1000.
also, animations in developer options settings are set to 0.