title says it all, fascinate with super clean 2.9.2 just started having this problem i noticed after i flashed i think.... anyone else?
Flash any other kernels? Usually camera failing is a kernel issue.
Sent from my SCH-I500 using XDA Premium App
TheSonicEmerald said:
Flash any other kernels? Usually camera failing is a kernel issue.
Sent from my SCH-I500 using XDA Premium App
Click to expand...
Click to collapse
ahhh yes i did, flashed a kernal. think i flashed ec10 voodoo the 1200 mhz one can't remeber exactly the name of it :O
mcniglet said:
title says it all, fascinate with super clean 2.9.2 just started having this problem i noticed after i flashed i think.... anyone else?
Click to expand...
Click to collapse
Newbie here, but have lil experience. When in camera or video mode, sometimes after reboots, "volume" defaults to zero or very low. You just may have volume, but not hearing it. Might look at that...worth a shot.
Related
Just odined back to jfd, rooted and used oclf lagfix. Question is can I flash from this point or do I need to remove lagfix?
Sent from my SGH-T959 using XDA App
Remove lagfix.
Sent from my SGH-T959 using XDA App
Thanks a million. I thought so but needed to be sure. P.s. I'm about to flash my FIRST custom rom any pointers.
Sent from my SGH-T959 using XDA App
The two top dogs around here imo are bionex or axura. Each have their own pros and cons (barely cons). I'm personal to Axura myself, although im still on nero v5. Been getting tired of redoing my homescreens over and over again. I suggest going into the release threads, found in developmet forum, for the respective roms and taking a look at screen shots and youtube search video reviews.
You really cant go wrong either way. Check out the rom bible thread for more awesome roms.
I would defantly stick with the Auxura rom or Som's Bionex rom, Ive bounced between the two, Each rom has it's own feel, while Axura's roms are ultra fast, The Bionex rom has more Gingerbread feel and smoothness, Make your own decesion, but as the previous poster said you can't go wrong with either of them.
Just a word of advice, get in the habbit of disabling Voodoo each time you flash, I made the mistake once and ended up softbricking the phone and it was a nightmare for me getting it back to stock via ODIN.
Good Luck
Actually, if you already have voodoo installed and the rom you're flashing to also has it, you don't need to disable it. I speak from experience
Sent from my SGH-T959 using XDA App
notverycreative said:
Actually, if you already have voodoo installed and the rom you're flashing to also has it, you don't need to disable it. I speak from experience
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
This is true, but new. It has only been that way for a little while. Also it ONLY is true if you are going from Voodoo 5 to Voodoo 5 (meaning the one that has the RED recovery).
notverycreative said:
Actually, if you already have voodoo installed and the rom you're flashing to also has it, you don't need to disable it. I speak from experience
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Thought, OCLF was ext2 and Voodoo was Ext4 wouldnt that cause problems...
ZachLL88 said:
Thought, OCLF was ext2 and Voodoo was Ext4 wouldnt that cause problems...
Click to expand...
Click to collapse
Yes. Yes it would. Read the post right above yours where I said (emphasis added):
T313C0mun1s7 said:
This is true, but new. It has only been that way for a little while. Also it ONLY is true if you are going from Voodoo 5 to Voodoo 5 (meaning the one that has the RED recovery).
Click to expand...
Click to collapse
Anybody can explain me how to enable JFS file system through ULK in Eugene's new kernel?
I have tried several times unsuccessfully, I toggled use JFS then my phone boots onto a loop, and keeps vibrating!
U didn't flash his kernel right.
Go to the dead horse thread.
Go to page 48 I think???
And a guy quoted the tutorial.
I used that after.my phone kept going into a bootloop.
But I also got rid of that kernel when my quadrant scores were like 400 less than voodoo.
Sent from my SGH-T959 using XDA App
Thanks a lot murmado305
Found it??
Sent from my SGH-T959 using XDA App
murdamo305 said:
Found it??
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Yes I found it... Odined KA6 now flashing Bionix v!
Hey folks,
I put this together earlier. Seems to work ok. Fully bloated, but deodexed and zpaligned ED01.
It contains busybox, and has been rooted.
Does not contain recovery, kernel, or radio. Those you must supply. Chances are, EC01 radio works just as well as the ED01 radio.
Ammend only at this time! This means use CWR 2.5.x.
http://adrynalyne.grdlock.net/bamf/roms/ed01_stock.zip
This one is a bit better. Once again, no recovery, kernel, or radio.
Debloated/Debinged (even browser and long press search)/Deodexed/Zipaligned/latest Maps, Gmail, Market, Voice Search. HAS NOT BEEN TESTED YET.
http://www.multiupload.com/BKHF5DKJ18
You work fast. Thanks a bunch.
Downloading debloated version now... I will test it and let you know if any issues come up... fyi, I'm running jt's latest voodoo kernel and (obviously) EC01 radio... thanks for your hard work
Another Fascinating post by my XDA app...
What would be the best way to go about rooting the OTA that I accepted? Lol
Initial boot good (wiped Davlik and cache, but not data), launched XDA premium 1.1 no problem, let's see how it does with Nitro's Honeycomb theme with the transparent dialer and the themed keyboard ...
Another Fascinating post by my XDA app...
Debloated version installed, theme over it. Good stuff.
stereoblind said:
What would be the best way to go about rooting the OTA that I accepted? Lol
Click to expand...
Click to collapse
Personally I like using the ADB method
What OTA did you accept?
Links removed: I just saw that ED01 OTA is being pushed out. I'd wait until someone more knowledgeable comes along or try posting this in one of the ED01 threads that are popping up quickly.
Nitro's honeycomb theme works as well... so far so good...
Another Fascinating post by my XDA app...
F*ck adrynalyne beat me to this.... lol. Can I add to this and repost it with things I add? Namely malware protection and other things? I'm also going to make it edify scripting so it works with cwm. 3
Anybody else on this rom getting asked to install an update?
Sent from my SCH-I500 using XDA Premium App
absens said:
Anybody else on this rom getting asked to install an update?
Sent from my SCH-I500 using XDA Premium App
Click to expand...
Click to collapse
Yes
Another Fascinating post by my XDA app...
tonu42 said:
F*ck adrynalyne beat me to this.... lol. Can I add to this and repost it with things I add? Namely malware protection and other things? I'm also going to make it edify scripting so it works with cwm. 3
Click to expand...
Click to collapse
Just two weeks ago you were asking for all in one guides and now you are wanting to release a rom?
Sent from my SCH-I500 using XDA App
tyler1234567 said:
Just two weeks ago you were asking for all in one guides and now you are wanting to release a rom?
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Its not as hard as I thought it was, it just comes down to the updater-script that I mess up on.
Sent from my SCH-I500 using Tapatalk
Right on, guess you gotta start somewhere, if you can do it without causing bricks then by all means.
tonu42 said:
Its not as hard as I thought it was, it just comes down to the updater-script that I mess up on.
Sent from my SCH-I500 using Tapatalk
Click to expand...
Click to collapse
Sent from my SCH-I500 using XDA App
Hi adrynalyne,
Can you share what are kind of ROM, recovery, kernel, and radio you using on your phone? And the link to download them.
Thanks
Debloated/debinged with a touch of blur. Great job man. Really appreciate all the work you put into our phone.
Currently running EB01 stock, EC10 voodoo, and EC01 radio.
Can i just flash this rom after wiping cache & dalvik? or do I need to turn off voodoo, etc? Rom doesn't contain kernel, etc so I think I'd be ok?
hhmmmm shuold i do an ota then this? to get the readio and kernals?
doe sit block the tether tracker?
reisb said:
Currently running EB01 stock, EC10 voodoo, and EC01 radio.
Can i just flash this rom after wiping cache & dalvik? or do I need to turn off voodoo, etc? Rom doesn't contain kernel, etc so I think I'd be ok?
Click to expand...
Click to collapse
I only wiped dalvik and cache. Flashed over EC01 rom and radio with voodoo kernel. Not a single problem.
Is there a benefit to the new radio? If not I will just hang tight for the community project.
Sent from my SCH-I500 using XDA Premium App
when you flash to stock GB (EH09, i believe [2.3.5]) do you have the gb bootloader or not?
Sent from my SCH-I500 using XDA
Nope, you need to flash it separately. Its floating around here somewhere.
Sent from my SCH-I500 using xda premium
mezster said:
Nope, you need to flash it separately. Its floating around here somewhere.
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
okay, i definitely flashed it, i wonder if i can flash kernels now separately for GB without bricking my phone
Sent from my SCH-I500 using XDA
ztotherad said:
okay, i definitely flashed it, i wonder if i can flash kernels now separately for GB without bricking my phone
Sent from my SCH-I500 using XDA
Click to expand...
Click to collapse
makes absolutely no difference unless your flashing the glitch kernel...even then all it does is allow the glitch splash screen on boot to function.
droidstyle said:
makes absolutely no difference unless your flashing the glitch kernel...even then all it does is allow the glitch splash screen on boot to function.
Click to expand...
Click to collapse
yeah, but I was having problems w flashing kernels before I flashed the GB bootloader
edit nvrmind
droidstyle said:
makes absolutely no difference unless your flashing the glitch kernel...even then all it does is allow the glitch splash screen on boot to function.
Click to expand...
Click to collapse
Actually it has been advised in glitch thread, seems there are other features that depend on it:
http://forum.xda-developers.com/showthread.php?p=25881103
Sent from my SCH-I500 using xda premium
mezster said:
Actually it has been advised in glitch thread, seems there are other features that depend on it:
http://forum.xda-developers.com/showthread.php?p=25881103
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
yes i read that, but have you tried both bootloaders with that skunkworks kernel and seen any difference? i currently am using gb bootloaders but all im saying is I dont see a difference and it shouldnt have anything to do with having problems flashing kerns. jt1134 said along time ago that gb bootloaders do nothing more than froyo variants.
droidstyle said:
yes i read that, but have you tried both bootloaders with that skunkworks kernel and seen any difference? i currently am using gb bootloaders but all im saying is I dont see a difference and it shouldnt have anything to do with having problems flashing kerns. jt1134 said along time ago that gb bootloaders do nothing more than froyo variants.
Click to expand...
Click to collapse
I hear ya, and I too know jt's take on the subject but when the glitch guys say to flash them or don't bother posting bugs I gotta heed their advice. And no I haven't tried skunk yet but back around m4 I ran without gb bootloaders and all was fine. I'm still on b31 ha! Just been too lazy (and satisfied) to move forward, but I probably will now to check out the new hybrid UI.
Sent from my SCH-I500 using xda premium
I'm trying to use ryanza lag fix but idk how to do it with only my phone, and I even downloaded the update zip that it said to apply but it says installation aborted? How do you fix this?
Sent from my SGH-T959 using xda app-developers app
*raises eyebrow* What rom are you running?
Chimera 2.2
Sent from my SGH-T959 using xda app-developers app
Are you talking about the old One Click Lagfix? I don't think you need to worry about that nowadays in your ICS ROMs, let alone those old fixes even working. I could be wrong, but the lag fixes I know about (voodoo and OCL) just changed file systems from RFS to EXT, and you don't have that problem with ICS ROMS.
PS supercurio's voodoo lagfix is better if you ever go back to Froyo, and almost every custom ROM you see will have a kernel that has it enabled by default.
He's talking about this
RyanZA's lag fix: will it work on the vibrant? **UPDATE**
I don't use it or know anything about it. When I'm on 2.2/2.3, is always use Voodoo.
Yea man, I've honestly never heard of RyanZa's lagfix lol I had to look it up also, and it seems rather....antiquated if you ask me lol
As Wood mentioned, most Froyo and GB roms run with voodoo already enabled, so you don't need to worry about running a lagfix or anything.
I'm not entirely sure about ICS roms, however I can tell you that you most certainly do not want this RyanZa thing.
I remember using oclf at the early time if the vibrant. I only used it back on rooted stock 2.1 though. After that it was voodoo. Voodoo is twice as fast anyways. Regardless I think it was only for samsung roms, not aosp based. Isn't voodoo the same way?
The last time I used it was on the onyx and obsidian roms, back when voodoo caused soft bricks if it want disabled between flashing. Once that got fixed oclf seemed to have gotten abandoned.
Wasn't this method outdated after eclair? I remember using it when the Vibrant first came out but not since.
Sent from my SGH-T989 using xda premium
explodingboy70 said:
Wasn't this method outdated after eclair? I remember using it when the Vibrant first came out but not since.
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Yea its been out date for a long while xD
Sent from my Galaxy Nexus using Tapatalk 2
iKoolkid said:
I'm trying to use ryanza lag fix but idk how to do it with only my phone, and I even downloaded the update zip that it said to apply but it says installation aborted? How do you fix this?
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
chimera 2.2 should have very little if any lag. also, don't use ryanza lag fix; i think that only works on eclair. it will mess up your phone. you might as well flash jellybro with devil kernal