How do you get usb mass storage to work on cm6 beta 1?
Same way as you would on a Touchwiz rom. Select the notification on top after connecting, then press mount.
Sent from my SCH-I500 using XDA Premium App
hmm i'm not getting that notification at all. I followed all the steps to install so im not sure why it wouldnt work
Menu, settings, USB settings. "Ask on connection" then when it "asks" choose mass storage. Then pull down the notification bar. Then click to mount.
Related
has anyone else found this screen and what to do with it, other than the obvious usb tabs. i having trouble with screen shot but if you tap the left bottom corner of the screen, the notifications window will come up, as you push in the usb cable to charge, this will expand and give you the standard usb notfication. if you press this notification, a settings screen will appear, evev after removal of usb cable.
hopefully screen shots will appear.
Wow I had no idea lol
Ok so if you install anycut you can make a direct link to the development settings so no need to play with a usb cable.
That token setting looks interesting but it just closes to home ill have to play with logcat later
anycut gives a lot of very interesting options... but though I made shortcuts I can't see them in any of my launchers. I have Launcher Pro, the Nook standard one and Zeam. No default... i rather like the options.
But some of the options given by Anycut are keyboard settings and CDMA/GPRS/Network settings.
Wow, has anyone tried that on a non-rooted nook?
That's the main difference to Anycut... of course we can get to these settings once we have rooted. But if this screen can be accessed via a standard nook, that hasn't been "nootered", we can just enable adb there. Whether adb then has root access (as with nooter) I don't know, but still it's a new and easier angle at getting access to the device.
I got it to show up this way:
(0. no USB connected)
1. press the left bottom corner ... this will show you the original android notification bar as popup
2. connect USB cable (to PC and device)
3. you usually can't do anything because of the USB-Mode popup, but since the notification bar has focus we can touch the icon that now appears there.
-> remove cable and you are on the screen shown in OP's post.
ixampl said:
Wow, has anyone tried that on a non-rooted nook?
Click to expand...
Click to collapse
I just tried this on my un-rooted nook, and wasn't able to get the screen to appear.
The USB dialog he's referring to should only appear if you're rooted and ADB is enabled.
This potentially means, however, that the rest of the settings aren't actually removed from the nook, just hidden, and that there should be a way to access them somehow.
Ohhhh that would be nice..
tokyomonster said:
The USB dialog he's referring to should only appear if you're rooted and ADB is enabled.
This potentially means, however, that the rest of the settings aren't actually removed from the nook, just hidden, and that there should be a way to access them somehow.
Click to expand...
Click to collapse
Several options will be more functional if you harvest the "extra" apps installed on the nookcolor emulator that ships as part of the SDK.
Also, if you're curious about how to toggle this setting without the UI,
have a look at /data/property/persist.service.mount.umsauto
How do you actually get the card to mount in the future if you disable auto mounting of it?
BertoJG said:
How do you actually get the card to mount in the future if you disable auto mounting of it?
Click to expand...
Click to collapse
see nookdevs
My Aria running CM 6.1.1 all of a sudden won't connect to my computer, i was tryna put songs on my phone but when i connect it, it only charges, nthn pops up in the notification bar saying that its connect via usb or anything, it just charges.....Please Help!
Sorri if this thread was already made, i searched questions and answers and didn't see it
Enable debugging in the settings
Sent from my Liberty using XDA App
it was enabled
Try another USB port.
Sent from my Liberty using XDA App
just tried all three ports, no response from any of them
lol, CM6 has the option in the notification bar. swipe down the notification bar and touch the USB icon. then select the option you want
zedbra said:
lol, CM6 has the option in the notification bar. swipe down the notification bar and touch the USB icon. then select the option you want
Click to expand...
Click to collapse
I think that's his problem, it won't show up. Lol
Have you tried re-booting? Whenever CM copped out on me and did this (yeah, I went through this too lol), I just restarted my phone.
lol thanx, but all of a sudden it connected, like 30 minutes after i rebooted both my phone and computer, weird, cause that never happened before
That's because you killed the Obex service(or something like that) from the running service in the running services setting. I've done this before too. But Idk if its the same for cm6 cause I'm on Liberated FR008. But that's probably the problem.
Sent from my HTC Liberty using XDA App
Newbie here to the android world and I installed Vegan-Tab with no problems, but now when I connect the Tablet to my CPU (windows 7) it shows the drive letter but will not open. Any ideas?
You must open the notification menu and look for the option to mount USB.
in the notification bar at the top, it'll say "USB CONNECTED" tap that, and it'll say something about certain aps not working while in USB mount mode, tap ok or yes or whatever, then tap where it says "Turn on USB Storage"
i have this problem that apps that i have installed in my sd card shows and android default icon that is green and white. is there a solution for it to show the right icon? sometime it shows the right one,sometimes it doesnt.
someone926 said:
i have this problem that apps that i have installed in my sd card shows and android default icon that is green and white. is there a solution for it to show the right icon? sometime it shows the right one,sometimes it doesnt.
Click to expand...
Click to collapse
When you mount the SD card on your PC, the apps on SD become unavailable,
thus showing the default android app icon.
even though its not mounted it is still same icon. i can execute the app but its icon is the android one
Weird, try reinstalling the apps or something o.o
Sent from my X10a using XDA App
too many to reinstall all.i found a solution. tnx for the replies.
As asked any one knows how to set UMS as default on notifications?
Many thanks.
Best Regards,
Jus
jussy said:
As asked any one knows how to set UMS as default on notifications?
Many thanks.
Best Regards,
Jus
Click to expand...
Click to collapse
Settings > Storage once there tap the soft menu key once, if u get the option 'USB computer connection' select the same and in that check ' USB mass connection' and see
Thanks for quick and kind reply, but I knew that.
I'm asking for that old gingerbread option in notification bar when the cable is plugged in instead of the new (ICS/JB) one.
jussy said:
Thanks for quick and kind reply, but I knew that already.
I'm asking for that old gingerbread option in notification bar when the cable is plugged in instead of the new (ICS/JB) one.
Click to expand...
Click to collapse
AFAIK, thats not possible unless some on make a MOD for the same
So I'll wait for that.
Thanks
Sun90 said:
Settings > Storage once there tap the soft menu key once, if u get the option 'USB computer connection' select the same and in that check ' USB mass connection' and see
Click to expand...
Click to collapse
I am using the Chameleon v3.0 BETA, based on the XXLSJ, but I do not have this option in Storage. Is there other ways to set the device as UMS?