I have a stock samsung fascinate rooted, and with CwM Voodoo Lagfix Recovery v2.5.1.x all I want to acomplish is getting this installed:
http://forum.xda-developers.com/showthread.php?t=985689
Please help guys, I just dont know what to do from here.
Info:
Hardware Version: i500.04
Model number: SCH-I500
Firmware Version: 2.1-update1
Baseband Version: S:i500.04 K.DJ20
Kernal version: 2.6.29
Build Number: SCH-I500.DJ20
Carrier: Cellular South
Thanks for any help guys!
Step one is to get off of eclair and start using froyo.
If you follow the installation instructions on this thread, you'll get a stock EC01 rom.
Once you have the rom, download either of the EC01 downloads from the theme page (with or without animations; that's up to you) to your sdcard, then boot up cwm and install the zip.
Can you understand the instructions on the EC01 thread, or do you need further help?
blandj said:
Step one is to get off of eclair and start using froyo.
If you follow the installation instructions on this thread, you'll get a stock EC01 rom.
Once you have the rom, download either of the EC01 downloads from the theme page (with or without animations; that's up to you) to your sdcard, then boot up cwm and install the zip.
Can you understand the instructions on the EC01 thread, or do you need further help?
Click to expand...
Click to collapse
Thanks for your help, do I need to flash to eb01 like it says? (I dont like eclair)
You don't NEED to do anything aside die and pay taxes. Should you follow the tried and tested method? Well, do you want a process that is tried and confirmed working our do you want to gamble with something that might or might not work? Are you then willing to trouble shoot?
Its recommended to wipe when going from eclair to froyo anyway.
Sent from my SCH-I500 using XDA Premium App
garretts228 said:
Thanks for your help, do I need to flash to eb01 like it says? (I dont like eclair)
Click to expand...
Click to collapse
You should follow the instructions exactly as listed to have the best chance of things working. So yeah, odin the stock package.
And yes, you would want to wipe data if you were simply installing a froyo rom over an eclair one (otherwise you'd get force-closes all over the place). But the stock package (which is froyo and much newer than dj20) takes care of that automatically. (Also, the instructions say not to wipe during the rest of the steps.)
garretts228 said:
I have a stock samsung fascinate rooted, and with CwM Voodoo Lagfix Recovery v2.5.1.x all I want to acomplish is getting this installed:
http://forum.xda-developers.com/showthread.php?t=985689
Please help guys, I just dont know what to do from here.
Info:
Hardware Version: i500.04
Model number: SCH-I500
Firmware Version: 2.1-update1
Baseband Version: S:i500.04 K.DJ20
Kernal version: 2.6.29
Build Number: SCH-I500.DJ20
Carrier: Cellular South
Thanks for any help guys!
Click to expand...
Click to collapse
Umm you sure you have a fascinate and not a showcase? Not sure this stuff works for cell south.
Sent from my SCH-I500 using XDA App
He doesn't have a fascinate.
Sent from my SCH-I500 using XDA App
Related
Hey guys, I've been having problems with my vibration since I flashed Blackhole a while back.. I've just flashed to Superclean v2.9.2 and I'm still having the same problem.. I get absolutely no haptic feedback even with all settings on.. I'm still fairly new to this and have been learning as I go but can't figure out this one..
Here's what I got.
Firmware: 2.2.1
Broadband Version: S:1500.04 V.EB01
Kernel Version: 2.6.32.9
Build Number: SCH-I500.EB01
I'm sure I'm just missing something here. I appreciate any help. Thanks.
In your specific problem, I would odin to stock. here's why.
if you odin to stock and it doesn't work, then you are already set to take it to verizon. If it does work you are in prime position to go back to a custom rom knowing that it isn't hardware.
Sent from my SCH-I500 using XDA App
So my best bet would be just to flash with a fresh copy of DL09 and see if it works? I'm assuming I should clear all my data and cache through clockwork also?
If you odin, then your cache and dalvik will be cleared anyways.
Sent from my SCH-I500 using XDA App
I am planning on calling Verizon to get a Droid Charge as a replacement. I have CM7 installed do not wish to do a factory restore to stock. (I need my phone to be useable till I get the Charge) Could someone with stock please give me a screen shot or list stats for the About Phone screen? It would be most helpful to my self and maybe others.
Android Version:
Baseband Version:
Kernel Version:
Build Number:
If there is any other info I would need please list.
Stock is ed04 froyo. Unless you want to get charged for the charge you need to figure out which of the various methods to use to get back stock before you sent the phone back. Hint all the info you need is stickied.
good day. using xda premium.
I have no problems going back to stock using oden. As you know the whole process will take less then 5 minuets. I just don't want to do it till I actually have the charge in hand to make the switch.
Are you saying the About Phone Info is stickied because I can't find it? I have done a Google Search and a Forum Search.
atrich0608 said:
I have no problems going back to stock using oden. As you know the whole process will take less then 5 minuets. I just don't want to do it till I actually have the charge in hand to make the switch.
Are you saying the About Phone Info is stickied because I can't find it? I have done a Google Search and a Forum Search.
Click to expand...
Click to collapse
Odin DI01 then update via OTA.
Process will be like DI01>EA28>ED04
Sent from my Incredible 2 using XDA Premium App
atrich0608 said:
I am planning on calling Verizon to get a Droid Charge as a replacement. I have CM7 installed do not wish to do a factory restore to stock. (I need my phone to be useable till I get the Charge) Could someone with stock please give me a screen shot or list stats for the About Phone screen? It would be most helpful to my self and maybe others.
Android Version:
Baseband Version:
Kernel Version:
Build Number:
If there is any other info I would need please list.
Click to expand...
Click to collapse
Android Version: 2.2.1
Baseband: ED04
Kernel: 2.6.32.9 (I think)
Build: ED04
blazing through on my VZ Droid Charge
Here is the post you want.
Code:
http://forum.xda-developers.com/showthread.php?t=1026746
Odin Eclair and make sure to check re-partition using the atlas pit. (PDA)
Then just get the OTA's till your up to ED04
Went DL09 OTA'd to ED04
This is what i have:
Android Version: 2.2.1
Baseband: S:i500.04 V.ED04
Kernel: 2.6.32.9
Build: SCH-I500.ED04
Thanks all for the help, my charge is on it's way. Just holding off till the last second to return to stock.
Been using stock sense yesterday afternoon and it's not nearly as bad as it used to be. I would rate it as almost useable.
ED05 was pushed out today
This is what i have:
Android Version: 2.2.2
Baseband: S:i500.04 V.ED05
Kernel: 2.6.32.9
Build: SCH-I500.ED05
Just needed help to make sure I won't hard-brick my phone
Phone currently runs:
Android Version: 2.2.1
Baseband: N_01.77.06P
Kernel Version: 2.6.32.9
Build number: OLYLA_U4_0.37.4
I've checked other forum threads but I'm still pretty wary on unlocking and flashing my phone.
To my knowledge I need to:
1. CWM Tenfar Recovery and Titanium Backup to backup personal apps/data and system data
2. Flash IHOP SBF through RDS
3. Second Backup
4. Flash Custom Rom (probably beta-CM7 or an international rom)
Does that sound right?
Thanks!
looks good to me (did mine yesterday) but get a second opinion just in case
Sent from my MB860 using XDA App
The recovery has to go after the unlock but looks good either than that
sent from my Atrix via XDA premium
So unlock then install cwn right? ... oh and before I install the rom I have to do the data wipe and reset right?
Thank!
Sent from my MB860 using XDA App
Yup
sent from my Atrix via XDA premium
Thanks
Sent from my MB860 using XDA App
haven't tried the "one click root for atrix" yet but looks good
but anyway this is what i did.....
courtesy of J-roc
root,cwm,unlock bootloader,flash GB
Pt 1. http://www.youtube.com/watch?v=jPQzZOj0-BA
Pt 2. http://www.youtube.com/user/TheSmokingAndroid#p/u/4/BYM-YeSH22o
Pt 3. http://www.youtube.com/user/TheSmokingAndroid#p/u/3/CwJGetPHlzE
Pt 4. http://www.youtube.com/watch?v=IcgvglaXLyM
Pt 5. http://www.youtube.com/watch?v=CzFhKFeTBuM
Fairly straight forward and simple.....no problem
one question... say i would install cm7 as the rom, or any international rom... which kernel would i flash first?
(Edit) @spuzzum ... I'll probably try that first, thanks!!
i believe faux123's Unified CM7 Kernel is good for ATT and International.(The one listed under CyanogenMod 7 in faux123's thread) I think you just have to pick if you want the 1Ghz or the 1.3Ghz one. (1.3 can be overclocked)
If you are just getting one for GB then you have to ck to see which international one you need the d00 or the 1100 (Listed under Gingerbread)
There is a way of finding out which one you need but i can remember it off the top of my head right now.
I am using Alien with the faux's gingerbread d00 kernel and lovin it. I think i'll wait for the CM7 to get some more stuff ironed out before i try it .
Hi I have to ask and I've tried searching and I came up with nothing.
I recently upgraded my stock Froyo Samsung Galaxy SGH T959 which I had rooted to Gingerbread by flashing on Odin3 v1.82. The problem now is that I used the rom for a GT-I9000 instead. So, pressing the home button does nothing but move stuff to the left. Is there a way I can get my phone to run the appropriate Gingerbread rom for SGH T959?
My concerns are is it safe to immediately flash to 2.3x for the SGH T959 or is it safer instead to downgrade it to 2.2x then flash it to 2.3x?
This is the information I get from Settings>About phone
Model number: GT-I9000
Firmware version: 2.3.4
Baseband version: I9000XXJVQ
Kernel version: 2.6.35.7-I9000XXJVQ-CL281085 [email protected] #2
Build number: GINGERBREAD.XXJVQ
In using Odin3 v.182 I had ticked 6 boxes "Re-Partition, Auto Reboot, F. Reset Time, PDA, PHONE, CSC. I also had used a PIT which was "s1_odin_20100512.pit"
the .tar's I used for PDA/PHONE/CSC were;
PDADA_XXJVQ_Sbl.tar.md5
PHONE: PHONE_XXJVQ.tar.md5
CSC: CSC_OXAJVQ.tar.md5
I hope whatever info I gave was relevant and I anticipate and thank you in advance for any help that you can offer.
Its your phone, but i would not do it. your about phone 19000 model shouldnt be the, and the button issues need to be addressed. If you think it will overwrite the gt, it may not,it could brick. Id start over. My opinion.
I mean stock, 2.2 may brick too, get more info.
shawnhoong said:
Hi I have to ask and I've tried searching and I came up with nothing.
I recently upgraded my stock Froyo Samsung Galaxy SGH T959 which I had rooted to Gingerbread by flashing on Odin3 v1.82. The problem now is that I used the rom for a GT-I9000 instead. So, pressing the home button does nothing but move stuff to the left. Is there a way I can get my phone to run the appropriate Gingerbread rom for SGH T959?
My concerns are is it safe to immediately flash to 2.3x for the SGH T959 or is it safer instead to downgrade it to 2.2x then flash it to 2.3x?
This is the information I get from Settings>About phone
Model number: GT-I9000
Firmware version: 2.3.4
Baseband version: I9000XXJVQ
Kernel version: 2.6.35.7-I9000XXJVQ-CL281085 [email protected] #2
Build number: GINGERBREAD.XXJVQ
In using Odin3 v.182 I had ticked 6 boxes "Re-Partition, Auto Reboot, F. Reset Time, PDA, PHONE, CSC. I also had used a PIT which was "s1_odin_20100512.pit"
the .tar's I used for PDA/PHONE/CSC were;
PDADA_XXJVQ_Sbl.tar.md5
PHONE: PHONE_XXJVQ.tar.md5
CSC: CSC_OXAJVQ.tar.md5
I hope whatever info I gave was relevant and I anticipate and thank you in advance for any help that you can offer.
Click to expand...
Click to collapse
You need to flash your phone back to stock JDF Rom with Odin and start over with a GB Rom made for the Vibrant.
Get the AIO Vibrant toolbox from the top of the development thread. Make sure you read the instructions first and you'll be fine. Good luck.
Sent from my SGH-T959V using xda premium
bigtom624 said:
You need to flash your phone back to stock JDF Rom with Odin and start over with a GB Rom made for the Vibrant.
Get the AIO Vibrant toolbox from the top of the development thread. Make sure you read the instructions first and you'll be fine. Good luck.
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
So if I flash back to stock JDF Rom with Odin using this link http://forum.xda-developers.com/showthread.php?t=734475, why would I need the AIO Vibrant toolbox for? Also where can I get a GB Rom made for the Vibrant? I look around and I see unstable custom roms like cyanogen 7, etc etc. Also I tried searching for the AIO Vibrant toolbox and I can't seem to find the download code. Thanks.
shawnhoong said:
So if I flash back to stock JDF Rom with Odin using this link http://forum.xda-developers.com/showthread.php?t=734475, why would I need the AIO Vibrant toolbox for? Also where can I get a GB Rom made for the Vibrant? I look around and I see unstable custom roms like cyanogen 7, etc etc. Also I tried searching for the AIO Vibrant toolbox and I can't seem to find the download code. Thanks.
Click to expand...
Click to collapse
The AIO toolbox has all the JDF files included in it. That's why I suggested you use it. It is in the Development section at the top of the page. You can use the files in the link you provided also, they are the same ones that are in the toolbox. It is just easier to use it since its just one click to flash it. As for CM7, it is very stable. I have it running on my Vibrant now and have be using it for months. I get around 20 hours of battery. I would suggest using Eugene's Kernel with it also. It is in the development section under CM7 Streamline Kernel. Give it a try. You wont be disappointed.
Sent from my SGH-T959V using xda premium
shawnhoong said:
Hi I have to ask and I've tried searching and I came up with nothing.
I recently upgraded my stock Froyo Samsung Galaxy SGH T959 which I had rooted to Gingerbread by flashing on Odin3 v1.82. The problem now is that I used the rom for a GT-I9000 instead. So, pressing the home button does nothing but move stuff to the left. Is there a way I can get my phone to run the appropriate Gingerbread rom for SGH T959?
My concerns are is it safe to immediately flash to 2.3x for the SGH T959 or is it safer instead to downgrade it to 2.2x then flash it to 2.3x?
This is the information I get from Settings>About phone
Model number: GT-I9000
Firmware version: 2.3.4
Baseband version: I9000XXJVQ
Kernel version: 2.6.35.7-I9000XXJVQ-CL281085 [email protected] #2
Build number: GINGERBREAD.XXJVQ
In using Odin3 v.182 I had ticked 6 boxes "Re-Partition, Auto Reboot, F. Reset Time, PDA, PHONE, CSC. I also had used a PIT which was "s1_odin_20100512.pit"
the .tar's I used for PDA/PHONE/CSC were;
PDADA_XXJVQ_Sbl.tar.md5
PHONE: PHONE_XXJVQ.tar.md5
CSC: CSC_OXAJVQ.tar.md5
I hope whatever info I gave was relevant and I anticipate and thank you in advance for any help that you can offer.
Click to expand...
Click to collapse
I did the same a couple of days ago. You can see my thread here http://forum.xda-developers.com/showthread.php?t=1363535 . With GT-I9000 Rom the volume buttons of my phone swapped. Search button stopped working (infect started working as Right arrow button). media speakers of my phone also stopped working.
I used AIO tool box and it worked like charm and my phone was back to Eclair in few minutes. Just make sure you follow the instructions carefully.
Well after a whole day of testing around I soft bricked it once and managed to get it back to Eclair then back on to Froyo. Right now I still don't dare to play around and try to upgrade to Gingerbread. At least not until I back up my current rom and know how to use it properly.
Bigtom624, 20 hours of battery life is amazing! I'll definitely give CyanogenMod7 a try. What do you mean by Eugene's kernel by the way?
shawnhoong said:
Well after a whole day of testing around I soft bricked it once and managed to get it back to Eclair then back on to Froyo. Right now I still don't dare to play around and try to upgrade to Gingerbread. At least not until I back up my current rom and know how to use it properly.
Bigtom624, 20 hours of battery life is amazing! I'll definitely give CyanogenMod7 a try. What do you mean by Eugene's kernel by the way?
Click to expand...
Click to collapse
Here's a link to the Kernel. http://forum.xda-developers.com/showthread.php?t=1324212 After you set up your phone with CM7 download it and flash it in CWM and you'll be good to go. Since your new to all this flashing I suggest you read as much as possible before you try anything. So many people hear don't and the wind up messing up the phones. I don't mind helping anybody cause I was new once, but you have to do some things yourself if you want to learn. Let me know how you make out. If you need any advice let me know. Here's the link to the AIO Toolbox http://forum.xda-developers.com/showthread.php?t=954509.
I have before firmware version2.1-update1, baseband version T959UVKA2, kernel version 2.6.29, build number ECLAIR.UVKA2.
Now i update Bionix 1.3.1 , Kernel version 2.6.32.9 Firmware version 2.2.
Everything vorking realy good, but, my data speed is slower, before is 3G, now is E only, from same place.
Can i fix that, or maybe update to Bionix-v 1.3.1-FishmanMod(V3 update) can help to me ?
Can i update this Fisherman mode from my Bionix 1.3.1, with boot into clockwork recovery and flash this new rom or need before go to stock 2.1 version ?
Thank you for any help.
Look for the sticky on modems. Because what u need to do is flash a different modem I think kb5 or kb6 is pretty good but I don't remember
Sent from my SGH-T959 using XDA App
Well maybe it isn't a.sticky but the author of the modems post is scrizz. I'm pretty sure
Sent from my SGH-T959 using XDA App
Here is the modem thread.
http://forum.xda-developers.com/showthread.php?t=868774
If you want to go to Fish's ROM you can Odin but you don't need to. Just make sure you do the 3wipes and read the OP.
Thank you guys, for fast answer and help !