Hello XDA forums,
Recently I installed Urukdroid 1.0RC2 on an A43 8GB model, and I noticed how my device only has up to 7GB of space. I was just wondering where the other 1GB is because I don't want to have wasted space sitting around doing nothing.
Thanks for your time.
This "problem" isnt a problem
its always the same: if they write 8 gb, there is formatted only 7-7.3 gb
look at your hdd on your computer
Hello and thanks for the quick reply.
Actually I do understand the deal with the 1024mb = 1gb, but are you sure that it is supposed to read 6.95 gb (that is what it says in Linux when connected)? I'm pretty sure it should more or less be around 7.4-7.7.
Sent from my A43 using XDA Premium App
Okey thats pretty much
hm.. than its because urukdroid's formatting
what did you select in urukdroid installation progress?
EDIT: You said thanks, psst... push the "Thanks"-Button don't hurt
@denwaotoko:
What do you think where the system itself is hostet?
Right it is on that 8GB internal memory.
It has 3 Partitions ( without Uruk ) which are for System, Data and Rest.
@fzelle correct.
as far as I know, the kernel splits the 8GB in two "virtual" devices which of one is 512 MB large and the other one 7,5 GB.
The first virtual device is /dev/block/mmcblk0 which contains rawfs (boot), swap, system and /data partition while the second (big!) virtual device is /dev/block/mmcblk1 and contains only one fat32 partition (internal storage)
so you only get 7,5 GB which in the end is about 7,x GiB formatted storage that can be used (don't have my A101IT with me so I can't give exact numbers)
chulri said:
@fzelle correct.
as far as I know, the kernel splits the 8GB in two "virtual" devices which of one is 512 MB large and the other one 7,5 GB.
Click to expand...
Click to collapse
Yes I do realize that, so is the 1gb of "lost" space just hidden?
denwaotoko said:
Yes I do realize that, so is the 1gb of "lost" space just hidden?
Click to expand...
Click to collapse
Jap, exactly
We can be proud of the fact that android uses only little memory space,
Windows for example use 20 gb
Alright, I was just expecting that it would show up in a partition manager when connected to a Computer.
denwaotoko said:
Alright, I was just expecting that it would show up in a partition manager when connected to a Computer.
Click to expand...
Click to collapse
Nope,apparently not
Thank you for thanks
denwaotoko said:
Alright, I was just expecting that it would show up in a partition manager when connected to a Computer.
Click to expand...
Click to collapse
No, it doesn't because the device only shows /dev/block/mmcblk1 and mmcblk2 to the computer, where 1 is the internal flash (the last 7,5G of the internal mmc as I explained before) and 2 is the external microsd.
Related
Hi i have searched and cant find a clear guide, I have a 8 gig memory card and want to install apps to it. I can easily set a 3.8gig fat32 and 3.9gig etx3 partition but form this point on im lost!!
cheers
delete i figured it
IMHO, 3.9 gig as an EXT3 partition is way too big. It won't hurt of course, but it is rather a waste of space that could be better employed elsewhere.
512mb should be more than enough - indeed most Apps2SD guides I've seen seem to recommend this amount.
Regards,
Dave
anarchyuk said:
delete i figured it
Click to expand...
Click to collapse
Where? I'm lost yet...
sorry
I figured out where i was going wrong, I used the recovery image to format and part the 2gig that came with it and realised in gparted on linux that it had the LBA flag so i re done it, 6gig fat32 LBA, 1.4gig ext2 and 100meg swap when i booted the phone i then mounted the ext partition and it had already created a apps folder and moved stuff over!! This modaco rom is good!!
I have 25Gb of available space but less than 2Gb for apps? I'd like to use all internal storage for apps and the external card for media. Any idea how I set that up?
I have a Galaxy S2 Epic (SPH-D710) stock ROM, rooted with the zermax kernel and fited with a Sandisk 16Gb class 4 micro sd card.
Problem discovered while installing Navfree. Got the error message "not enough space". So I can't install and move.
Settings>Applications>Maganage applications>All shows
112Mb used of 1.9Gb available.
Settings>Storage>USB storage shows
Total space is 11.5Gb and Available space 11.5Gb
Settings>Storage>SD card shows
Total space 14.83Gb (aka 16Gb!) and Available space 14.81Gb.
syco123 said:
Settings>Storage>SD card shows
Total space 14.83Gb (aka 16Gb!) and Available space 14.81Gb.
Click to expand...
Click to collapse
That's perfectly normal dude.. The system uses a chunk of the built-in 16GB for the ROM's use (/system, /data, /cache plus a few other partitions), and the rest is assigned to /sdcard, hence the 11.5GB (I know, that's kind of like false advertisement but what you wanna do ? Sue Samsung ?)
And for the external SD, that's also normal. I'm surprised you didn't notice this detail on the capacity of your harddrive before : end-users tend to think in "base2" (whereas 1KB=1024 bytes, 1MB=1024KB, 1GB=1024MB, and so on), while media manufacturers count in "base10" (i.e. 1KB=1000bytes, 1MB=1000KB, etc). It's a cheap way to reach the symbolic "GB", "TB", "PB" (etc) landmarks more quickly (at least, quicker than the competition).
Do the maths, you'll see that over 16GB that makes a huge chunk of "magically" disappeared storage, but it never was there to begin with.. Also false advertising there, kind of.. But we're all in the same boat here. :S
Snakeforhire said:
That's perfectly normal dude..
Click to expand...
Click to collapse
Yea, I understand that, that why I put "(aka 16Gb") as I'm referring to a 16Gb card but listing 14.83Gb available. It was to not cause confusion, guess I failed there!
The problem I'm having is, I need around 4Gb (apparently) to install Navfree. I only have 2Gb available to apps even though I have 25Gb of storage.
People must be installing Navfree, so I must be doing something wrong.
16GB is 16000000000btye/1024/ 1024/1024 = 14. 9GB.
So it is 16Gb and not 16GB.
No such 4gb large program for android. The program is maybe 10-20mb. And the 4gb is the DATA. You can store the 4gb in your SD card.
Accidentally sent from my Google Nexus S using XDA Premium
I just tried again and it installed with a file size of 15.53Mb. Weird, Oh well, thanks anyway.
yeah i was gonna say : you might find some bloatware on the android market here and there, but by and large it is still pretty much immune to this phenomenon..
A 4GB program is something you might encounter under Windows, but Linux ?
Sorry that my first post is reviving an old-ish thread, but the initial question asked hasn't been answered (and a search of the forum didn't help me)..
Is it possible to resize the partitions of the internal storage on my s2, and if so, how?
And whilst on the subject of the internal storage, can someone please clarify if flashing a custom ROM will affect files on the "USB storage" partition, or only the files stored on the "internal" storage partition?
Sorry if these seem like noobish questions, but I am new to this customising malarkey, and want to make sure I don't lose any data unnecessarily, like I did countless times with my iPhone...
nope, flashing a rom (either stock or custom) *should* not alter usb or internal sdcard storage. If it does, that's a surefire sign that the guy who cooked the said rom has no friggin clue whatsoever about what he's messing with and to steer clear from this particular rom...
It must be possible to alter the partitioning scheme to resize the internal storage. At least that's the theory, we're dealing with a flavor of linux here, and everything is doable with linux -and enough effort and dedication.
However, as this partition lies on the same emmc chip as the system, data, cache and kernel/recovery/bootloader partitions, I highly recommend *NOT* to mess with it in any way -not unless you have another smartphone lying around that you could use as backup while your borked SGS2 is shipped back to the samsung service centre, and you're prepared to spend some $$ over the repairs (since rooting is absolutely necessary for this kind of manipulation, your warranty would theoretically be null&void in the process)...
i have comb, 3.3 1.1.
i go to storage view in settings.
it shows, 13 gigs, 12 available.
in the internal view it shows total 1.8 and 122 mb for media.
i get a notification saying low on space..
i cannot instal any app.
whats up?
new-to-it said:
i have comb, 3.3 1.1.
i go to storage view in settings.
it shows, 13 gigs, 12 available.
in the internal view it shows total 1.8 and 122 mb for media.
i get a notification saying low on space..
i cannot instal any app.
whats up?
Click to expand...
Click to collapse
Out of 16 gigs built in storage, 13 is set aside as regular sdcard storage while 2 gigs is used for "internal data" and 1 gig is not used at all. If you use the NVflash from the teamdrh ICS rom you can re-format it to have 4 gigs internal and 12 for storage.
The easy thing you can do since your are still on honeycomb is to install app2sd and move some of your data files to the "storage part" (13gigs) which will free that space up in your "internal data" (2gigs) or you can go through and uninstall any apps you no longer use.
i have 4 apps right now, the rest are the google stuff apps crap, which i assume cant go anywhere in fear of them not knowing when i fart..
but
without using the app2sd-(i cant fit it right now)-i can go to settings and move apps, but- where it sez move to- it sez move to usb then after moved it sez move to tablet.
redeyedjedi said:
Out of 16 gigs built in storage, 13 is set aside as regular sdcard storage while 2 gigs is used for "internal data" and 1 gig is not used at all.
Click to expand...
Click to collapse
No, no space is wasted like this--certainly not 1G. Use the busybox df instead of the system df. This has confused other users before.
If you use the NVflash from the teamdrh ICS rom you can re-format it to have 4 gigs internal and 12 for storage.
Click to expand...
Click to collapse
This is incorrect. Nvflash works on the NAND chip, not on SD cards. To repartition SD cards, use CWM, or this easy method if you want to keep existing data.
---------- Post added at 12:44 AM ---------- Previous post was at 12:30 AM ----------
new-to-it said:
i have comb, 3.3 1.1.
i go to storage view in settings.
it shows, 13 gigs, 12 available.
in the internal view it shows total 1.8 and 122 mb for media.
i get a notification saying low on space..
i cannot instal any app.
whats up?
Click to expand...
Click to collapse
This has been reported on GtabComb-b3.3 by some other users, but, I was never able to get to the bottom of the problem. Most users will just repartition their SD cards and make the problem away before I can get to troubleshooting the problem.
Get me a logcat, dmesg and other outputs after you've tried to install an app from Market. See this post for the commands to run.
---------- Post added at 12:47 AM ---------- Previous post was at 12:44 AM ----------
new-to-it said:
i can go to settings and move apps, but- where it sez move to- it sez move to usb then after moved it sez move to tablet.
Click to expand...
Click to collapse
That is the correct behaviour. Move to USB moves apps to /sdcard. Move to tablet moves the apps back into /data.
I meant to say you could use CWM to make 4 gigs. Where did that 1gig go?
redeyedjedi said:
I meant to say you could use CWM to make 4 gigs. Where did that 1gig go?
Click to expand...
Click to collapse
The missing 1 gig is the symlink I am working on that is set aside for data/cache and data/dalvic cache. Since the transition to make ROMs larger and our nand being only 512m that was put within either the ROM, CWM, or the boot.img so that everything will run without chopping away at the System to make it lighter, the way I do. If you Flash the nand with the older 1.2 NVflash and the older 1.2 ROMS that 1 gig will return and cache will return to its proper placement within the set stock partitions.
See, what you guys have latched on to is the total size of the /sdcard partition; but, that, is a red herring:
Partition sizes are fixed by CWM when you repartition the SD card--it is not changed in any other way. And, since the size of the internal SD card is fixed, and since all CWMs versions partition the SD card the same way each time, the total sizes of the both partitions cannot change drastically. Therefore, barring filesystem corruption--unlikely here because the only symptom is an inability to install new apps, the 13 GB value being reported has got to be an artifact of rounding, as I mentioned above. Plus, that 1GB is supposedly part of /sdcard, so no space is going to be deducted from /data (where apps usually live) anyway.
redeyedjedi said:
Where did that 1gig go?
Click to expand...
Click to collapse
Nowhere. This is an artifact of the rounding out process. See above.
As usual, I just can't understand what Nobe's trying to say. Going for the most straight-forward reading, however:
nobe1976 said:
The missing 1 gig is the symlink
Click to expand...
Click to collapse
Nope. The maximum size of a symbolic link on all the standard filesystems seen on the gtablet is only 255 bytes--not 1G.
I am working on that is set aside for data/cache and data/dalvic cache. Since the transition to make ROMs larger and our nand being only 512m that was put within either the ROM, CWM, or the boot.img so that everything will run without chopping away at the System to make it lighter, the way I do.
Click to expand...
Click to collapse
Wrong ROM, wrong partition, and, wrong bootloader.
First of all, the user's clearly stated that he has GtabComb-3.3 and a 1.1 bootloader--not any of the ICS/JB ROMs which require a different nvflash package. Second, even if the entire contents of /cache were in /data, it still wouldn't cause any reduction in the size of the /sdcard partition, which is entirely separate. See description above.
If you Flash the nand with the older 1.2 NVflash and the older 1.2 ROMS that 1 gig will return and cache will return to its proper placement within the set stock partitions.
Click to expand...
Click to collapse
Changing the bootloader won't fix the user's problems--except as a side-effect of re-installing the ROM from scratch.
We'll have to wait until the user comes back with the various outputs and do some more tests to really find out the cause of the user's real problem: Why can't he install any apps even with enough space on /data? He also can move apps to and from the SD card just fine, apparently.
I didn't mean for miss information on this OP's problem. The 1 gig issue that redeyedjedi is seeing is in fact within the updated jellybean and ICS ROMs only. I should have made that noted. To my understanding after the busy box command you and I went through later this year is that it does impact the data partition on the updated firmware only. I soon realized that after messing with a certain /etc file that it looks to be a virtual swap placement. Busybox reads now 4 gig of data with a 4096/0 partition set in recovery after replacing that file with he that sets proper cache within /dev partition. The fact that it still shows up on standard df means that the ROM somewhere is still showing something there if I am correct or could be a ghost or something. Correct me if I am wrong please.
Sent from My SmOoThA$$ Gtablet.
nobe1976 said:
The 1 gig issue that redeyedjedi is seeing is in fact within the updated jellybean and ICS ROMs only. I should have made that noted.
Click to expand...
Click to collapse
No.There is no 1G issue. It is just an artifact of how the partition spaces are displayed in the ROMs, and in the system-supplied df command on all Android versions. It is to avoid this sort of confusion that I ask users to use the busybox df command which displays its values (total space, free space, used space) in 1-K blocks.
To my understanding after the busy box command you and I went through later this year is that it does impact the data partition on the updated firmware only. I soon realized that after messing with a certain /etc file that it looks to be a virtual swap placement. Busybox reads now 4 gig of data with a 4096/0 partition set in recovery after replacing that file with he that sets proper cache within /dev partition. The fact that it still shows up on standard df means that the ROM somewhere is still showing something there if I am correct or could be a ghost or something. Correct me if I am wrong please.
Click to expand...
Click to collapse
Gladly--if only I could understand what you were after. Can you make your questions precise, mate?
So I put Carbon on my wife's tablet after not touching it for over a year. Amazing that I can come here and get exactly what I need. What a great community!
I do have a question. I have a 16gb model and a 16gb card. I can see and use the card, no problem.
Using astro or other file manager, the directories seem weird. That's not a problem. The problem is, I can only use 1gb of internal storage - is there a way to get at the balance of that? Or is it lost forever?
Sounds like your NT has the BN's old 1GB allocation for the user-media partition instead of the new 8GB.
To get a 8GB allocation, you can restore the NT to stock ROM and take it to a B&N store to have the repartition done; or you can (Google) search for a repart.img SD-based tool which also does the repartition (and in the process restore the NT to stock ROM). Either way, you can use CWM recovery to back up your current Carbon ROM before the operation and then restore it afterward.
Ah, I completely forgot about this little point. Thank you for the reminder and the options!
One more question from me about this, does it make sense in CM to have two internal storages anyway? Couldn't I just reformat it to have only one partition?
I know how to use parted, so this isn't why I am asking. I just wanted to ask here about potential other side effects.
I already reformatted that my internal memory is about 4GB and my sdcard0 storage is 10GB, but now I installed a huge app in internal memory which can't be moved to SD for some reason, and I want to at least reformat it the other way around or the default 12GB sdcard0 + 1GB internal
All apps are installed in the first internal memory anyway I have figured, so I don't know why this first sdcard0 does make sense at all? I first thought that would be used for apps, but currently there are 10 unused Gigabytes....
I am using a real sdcard in the device ( which is per default mounted as sdcard1 ), maybe that is the reason nothing is put on the internal sdcard0 ??
Any comments on this?
I'd also like to know if this can be done. I've read the posts that explain how to resize partition 10 (media) and 11 (user data), but I would like to know if it is possible to combine partition 10 and 11 into a single partition so that all available space that isn't used by the system can be used for apps and other data. Is this not possible because of different file systems or is there a way to do it?
I've also noticed that even though the Nook Tablet 16 GB physically has 1 GB RAM only 672 MB is recognized and the other 332 MB or so seems to be used as some type of virtual SD Card (this can be seen in Settings -> Apps -> On SD Card). Is there a way to make the entire 1 GB recognized and utilized? I have not been able to find any information on this anywhere.
I am running CM 10.1 on Nook Tablet 16 GB.
bluesock said:
One more question from me about this, does it make sense in CM to have two internal storages anyway? Couldn't I just reformat it to have only one partition?
I know how to use parted, so this isn't why I am asking. I just wanted to ask here about potential other side effects.
...
Any comments on this?
Click to expand...
Click to collapse
Combining the two partitions without tweaking the ROM will likely result in errors when the system at boot time attempts to mount the partition you eliminate, and when some apps reference the file-system that supposedly resides on that eliminated partition. To avoid these errors, the eliminated partition would have be removed from boot-time auto-mount list, and its file-system root would have to be mapped (e.g., symbolically linked) to the mount point of the remaining partition.
skelnik said:
I
I've also noticed that even though the Nook Tablet 16 GB physically has 1 GB RAM only 672 MB is recognized and the other 332 MB or so seems to be used as some type of virtual SD Card (this can be seen in Settings -> Apps -> On SD Card). Is there a way to make the entire 1 GB recognized and utilized? I have not been able to find any information on this anywhere.
.
Click to expand...
Click to collapse
The 'missing' RAM is what the OS needs to keep the device going. 672 MB RAM free sounds very reasonable. What you see in the list as apps on sd card is the virtual sd card in storage, not RAM.
Sent from my BNTV600 using Tapatalk 4
The "missing" RAM is actually shared memory for the GPU (the SGX540). Video cards need RAM to load textures and whatnot.
You might have noticed that desktops without a dedicated GPU have much lower system RAM than advertised. Ex: my laptop with 3GB of system RAM actually shows something like 2970MB RAM (instead of 3096MB). The 100 odd MB of RAM is shared by the GPU (Intel GMA). If I had a dedicated GPU in my laptop, something like the GTX M GPUs with its own RAM, I would see and be able to use the full 3096MB of system RAM. It's the same thing with mobile devices, they share system RAM with the GPU.
That makes sense about the shared resources for the system and graphics. Thank you for the explanation!
Okay, if that is all, probably changing /system/etc/vold.fstab after repartitioning/removing the emmc-sdcard-partition and symlinking the other of the partitions should do it already? Or how does the storage settings things finds the storage memories? Or is there even something a bit more deeply buried, e.g. inside the kernels initrd or something like that? Does someone know those details?
@skelnik as written in the other thread something more here ...
It probably isn't completely beginner friendly to do all this just by this information here, but I might attempt to do this too, and then will share the information as step-wise as possible. But might take some weeks until I have a bit time left...
And be aware! There probably will be some downsides when not using a physical/external sdcard at all: You will not have the internal storage accessible as a usb storage device anymore (not sure about mtp or ptp mode, but these don't access everything anyway) - so if you screw up something it might become harder to recover. You should then probably have at least some 2gb sdcard you can use, just in case. But my opinion is that you should just pay those $5 for a physical sdcard (should even give you 4 or 8GB already...) and then there won't be these problems.
Use Ineternal Storage as sdcard on Nook Tablet
bluesock said:
@skelnik And be aware! There probably will be some downsides when not using a physical/external sdcard at all: You will not have the internal storage accessible as a usb storage device anymore (not sure about mtp or ptp mode, but these don't access everything anyway)
Click to expand...
Click to collapse
Actually you will still have access from the PC (Windows OS at least) to this partition after using the internal storage as an sdcard. You need to go into the USB Connection Settings under Storage and change it to "USB Mass Storage" mode. Also USB Debugging needs to be unchecked in order for you to get prompted to enable USB Connection to PC. After that you will be able to transfer data to and from your PC to the internal partition being used like an sdcard on your Nook Tablet. That partition is set to 10GB for me so that is a huge benefit and allows me to swap out multiple external sdcards any time without disabling any apps.
skelnik said:
Actually you will still have access from the PC (Windows OS at least) to this partition after using the internal storage as an sdcard. You need to go into the USB Connection Settings under Storage and change it to "USB Mass Storage" mode. Also USB Debugging needs to be unchecked in order for you to get prompted to enable USB Connection to PC. After that you will be able to transfer data to and from your PC to the internal partition being used like an sdcard on your Nook Tablet. That partition is set to 10GB for me so that is a huge benefit and allows me to swap out multiple external sdcards any time without disabling any apps.
Click to expand...
Click to collapse
Are you sure you mean the same thing as me? I am talking about removing one of the partitions and just making one large partition where both /data and a link from /sdcard into that will be. As far as I understood, Android does not do a virtualization of a path but really makes one of it's partitions accessible as usb storage? Or can you also format in ext4 and still read it in Windows?
If that works I am probably not right, otherwise read on:
All your configuration data and everything is on /data and would be removed from being accessible by the system as long as it is connected as usb storage (also all installed apps, ...), and besides that you would need to use the FAT filesystem for Windows compatibility, which is also probably not the best idea, security-wise (any app being able to read sdcard would for example be able to read your wifi configuration, maybe google account login data, etc. etc.).
Hello Everyone !
Last week i was trying different ways to mount our phone storage ( internal as well as card ). What im about to share is the result of some experiments done at that time.
This is not a guide exactly, as many of us know the steps done here, but still, i take no responsibility of any type of problem you face.Please ask for help if you need.
for more information : Read this.
When i checked my internal storage, it was 72% fragmented !!!
so i thought may be there are others who haven't formatted internal/external storage for a year or above, thus leading to heavy fragmentation.
here it is :
method 1: (also applicable for card storage)
take backup of all data and format. That should solve it !
method 2:
i recommend using 360 security app(with root access) first.
let the app scan your phone, it will find app cache, trash and user data in your phone. but first uninstall unused apps and delete some data that you don't need. you can always copy it back if you need it.
clean all, including empty folders (it will increase simplicity of your storage).
How to Mount Internal Storage as USB DRIVE :
1. Reboot into CWM
2. Connect phone to a windows PC (prefer win 7)
3. Go to "USB mass storage"
4. Select mount sd card.
5. You should see your internal mounted as removable mass storage drive.
6. Enjoy unrestricted access to your internal drive.
--------------------------------------
All right guys, i dont know much about the ssd, but if it is not necessary (even at > 50% of frag-level ), please tell me.
Thank you !
And here I am, thinking that we are using the EXT file system. :|
at least Samsung uses ext4, i think Sony does that too ...
DigitalDreamer said:
And here I am, thinking that we are using the EXT file system. :|
Click to expand...
Click to collapse
deshx said:
at least Samsung uses ext4, i think Sony does that too ...
Click to expand...
Click to collapse
Samsung uses their own filesystem in the newer devices.
And I think Sony uses ext4. But the thing is why would we need defragmentation if it's ext4. The files aren't accessed as in windows. Of course that windows will find disk errors and that there is a need if defrag. But the way Linux works, do we really need that?
file access is not the issue. i think the way ext4 manages writes makes all the difference.
ext3/ext4 avoid fragmentation of data and the way they store data, they can easily manage new read/writes without decreasing performance.
but even ext4 gets some issues, i found after some googling that when free space is less than ~15%, ext4 does not get enough room to swap things around. that fragments the drive heavily, thus the issues.
in that case, defragmenting might do some good.
DigitalDreamer said:
Samsung uses their own filesystem in the newer devices.
And I think Sony uses ext4. But the thing is why would we need defragmentation if it's ext4. The files aren't accessed as in windows. Of course that windows will find disk errors and that there is a need if defrag. But the way Linux works, do we really need that?
Click to expand...
Click to collapse
deshx said:
file access is not the issue. i think the way ext4 manages writes makes all the difference.
ext3/ext4 avoid fragmentation of data and the way they store data, they can easily manage new read/writes without decreasing performance.
but even ext4 gets some issues, i found after some googling that when free space is less than ~15%, ext4 does not get enough room to swap things around. that fragments the drive heavily, thus the issues.
in that case, defragmenting might do some good.
Click to expand...
Click to collapse
Oh yeah, on low space. Well on my U from 4GB I usually have around 2.5GB free so I guess I'm safe for now.
Btw the fragmentation usually shows losing performance when accessing libs and stuff. But that doesn't apply to us.
i had only 500mb free some time ago, so i did defrag the internal at that time(72% fragmentation), but now i have 3 gb free ! :highfive: .so its same for me ...no need !
DigitalDreamer said:
Oh yeah, on low space. Well on my U from 4GB I usually have around 2.5GB free so I guess I'm safe for now.
Btw the fragmentation usually shows losing performance when accessing libs and stuff. But that doesn't apply to us.
Click to expand...
Click to collapse
Internal storage (/sdcard) uses FAT32 file system, the data partition uses ext4 file system.
I know that defragmenting a flash drive is useful only to cause more wear and tear.
Are you all insane? You can't defragment flash drives!
That slows it down and eventually will ruin it.
Sent from Hacker's U on CM11 Weekly
If sdcard uses fat32, then it should be defragmented....otherwise its fine...
One doubt though, internal is named sdcard too....
You mean external storage, right?
HandyMenny said:
Internal storage (/sdcard) uses FAT32 file system, the data partition uses ext4 file system.
I know that defragmenting a flash drive is useful only to cause more wear and tear.
Click to expand...
Click to collapse
Sent from my ST27i
hackerpower said:
Are you all insane? You can't defragment flash drives!
That slows it down and eventually will ruin it.
Sent from Hacker's U on CM11 Weekly
Click to expand...
Click to collapse
so we shouldn't need to defragment internal or card.... Right?
Well I wasn't aware of this...
Sent from my ST27i
deshx said:
If sdcard uses fat32, then it should be defragmented....otherwise its fine...
One doubt though, internal is named sdcard too....
You mean external storage, right?
Sent from my ST27i
Click to expand...
Click to collapse
Internal storage use FAT32 filesystem, external storage use FAT/FAT32/exFAT.
Both are flash drives and shouldn't be defragmented.