so i am trying to install
http://forum.xda-developers.com/showthread.php?t=945264
on my x10a that was running free x10 beta 4. I installed the rom in the link, installed the update, installed baseband patch .49 (http://www.multiupload.com/U020F08R3N) and then installed the kernal (tripnraver/z) (http://www.mediafire.com/?bohywmag03c66sy)
somehow, now my x10 goes to the SE boot screen, shows a couple lines of code, and then goes back to SE screen, boots, runs fine with the nice framerate for like a minute, but no signal :/ and then, crashes...did i miss a step somewhere
much thanks to anyone with an answer
Stick to free x10!
Sent from my X10i using XDA Premium App
Related
I have no problem with using the flashtool, downloading the sin file, etc. But the step that says DO NOT let it boot and immediately go into xrecovery is what worries me. I love trying all the new ROMs, but am still always go back to a custom 2.1 because of the cam/videocam, plus no stereo bluetooth dropouts.
My question is, after I do this to update the baseband and flash 2.2 Beta 4 via xrecovery. Can I go back to my old custom 2.1 with older baseband via xrecovery and then switch back and forth via xrecovery afterward? I just don't feel like flashing the entire firmware, rooting, adding JIT v2, then removing all of the SE apps AGAIN for like the 10th time.
u can install any rom on .435 firmware..
u cant install beta 4 on any lower firmware(.24,etc)..
so update to .435 and stay..
happy flashing
sumeshd said:
u can install any rom on .435 firmware..
u cant install beta 4 on any lower firmware(.24,etc)..
so update to .435 and stay..
happy flashing
Click to expand...
Click to collapse
Im not entirely sure thats true because it seemed that those with the newer baseband seemed to be having issues with other roms prior to z's beta 4... can someone confirm?
Sent from my X10i using XDA App
its mentioned clearly in z's post about using the latest base band. as for Steve's recommendation of not letting it boot, i guess i must have missed it when i upgraded the base band while on 2.1 customised, but the only worst thing that happened was i didn't got any signal on my phone, everything else worked fine, it didn't mattered coz i was to install free x10 v4. and its a fine job done by z. the ROM is great. add green glow theme on it, and nothing's like it.
about xrecovery backup able to change your base band back with restore, i haven't tried it myself, i guess xrecovery devs will be the best guys to check if you're not sure.
Sent from my X10i using Tapatalk
I am running CM 6.1.3 on my x10i
Sometimes when the phone is locked and I get a call the phone is ringing but when I unlock it the answering window does not show I am just taken to the lock screen.
and the annoying thing is that the phone doesn't stop ringing oO lol and I have to reboot the phone everytime
Which cm 6.1.3 ROM r u running? Who makes it? That will help us here determine the problem better.
Sent from XDA Premium from my X10a rooted running 2.2.1 CM Rom from Rendeiro2005
http://forum.xda-developers.com/showthread.php?t=945264
I am using that one with the latest update
and forgot to mention I randomly get an error sometimes saying there was a call log failure and it was force closed (next time I get it I will copy the message I get)
U shouldnt have that issue at all. Try reflashing the rom by xrecovery with clearing phone memory, all caches, and battery stats. If that doesnt work, let me u mite have to reflash the se firmware from flashtool or seus and reroot and start over with flashing ROMS.
Lets start first with the xrecovery way first.
Sent from XDA Premium from my X10a rooted running 2.2.1 CM Rom from Rendeiro2005
Too much work :S xD I have to download all my apps again xD don't feel like doing it yet
I will eventually when it gets really annoying it didn't happen over the last 3 days so
Offcourse you dont have to download all your apps again Just back them up with titanium backup or mybackup
Sent from my X10i using XDA App
Hi, and to begin with sorry I can't post in dev section, no enough messages yet...
So my X10 failed since I tried another rom. Ok, so I went back to X10 2.1 official, then I rooted, installed busbox, xRecovery...
Well, let's try a new rom. I chose the TripNRaver Arc rom 2.3 gingerbread. Then I flashed the .49 baseband as asked in his topic, however I have infinite loop reboot. But it boots to PIN number asked, I see the phone find the network, so I think baseband is not the problem... But I'm not pro.
Any ideas would be appreciated.
Sorry, my English is not perfect since I'm french.
Thank you
dunkerquois88 said:
Hi, and to begin with sorry I can't post in dev section, no enough messages yet...
So my X10 failed since I tried another rom. Ok, so I went back to X10 2.1 official, then I rooted, installed busbox, xRecovery...
Well, let's try a new rom. I chose the TripNRaver Arc rom 2.3 gingerbread. Then I flashed the .49 baseband as asked in his topic, however I have infinite loop reboot. But it boots to PIN number asked, I see the phone find the network, so I think baseband is not the problem... But I'm not pro.
Any ideas would be appreciated.
Sorry, my English is not perfect since I'm french.
Thank you
Click to expand...
Click to collapse
It should crash a few times.
But if it continues to do that you may have the same problem i have.
My x10i won't run that rom at all.
Can you try bb 52?
Try to crash system server a few times. If that's not working you should reflash stock firmware with flashtool, reroot, xrec and so on. Then reflash bb49 and reinstall the Rom. Good Luck
Sent from my CM 6.1.3 v006 using XDA Premium App
dunkerquois88 said:
Hi, and to begin with sorry I can't post in dev section, no enough messages yet...
So my X10 failed since I tried another rom. Ok, so I went back to X10 2.1 official, then I rooted, installed busbox, xRecovery...
Well, let's try a new rom. I chose the TripNRaver Arc rom 2.3 gingerbread. Then I flashed the .49 baseband as asked in his topic, however I have infinite loop reboot. But it boots to PIN number asked, I see the phone find the network, so I think baseband is not the problem... But I'm not pro.
Any ideas would be appreciated.
Sorry, my English is not perfect since I'm french.
Thank you
Click to expand...
Click to collapse
TRy the question and answer section
lifty95 said:
Try to crash system server a few times. If that's not working you should reflash stock firmware with flashtool, reroot, xrec and so on. Then reflash bb49 and reinstall the Rom. Good Luck
Sent from my CM 6.1.3 v006 using XDA Premium App
Click to expand...
Click to collapse
Does it helped???
sent from my x10i CM 6.1.3 v006 undervolted
I have the fxp050 kernel on my x10 and i cannot flash or update the kernel because the phone now lacks the usb fucntion due to the port coming of and traces coming off the motherboard. Basically i am not really happy with the current rom that is on the phone when i got it from a friend, could anyone link to some roms that would run on this kernel as i have googled for hours and cannot find anything other than the rom i have (BlackEditionHD).
Thanks
Or is there any way i can flash a new kernel without usb?
Sent from my X10i using XDA
I not certain but I think cm based roms may work (eg: fxp 108 cm 7.2)
Sent from my X10 using XDA
I installed the fxp109 CM7.2 and it looked like it was going to run, got to the touch android to begin screen then just keeps giving me a blue LED and restarting?
Hi all... My phone screen touch stopped working after flashing on 2.3.3. You can read in this link about the problem But now my problem is solved. I took it to mobile service center and they charged me $10.
Now my phone is on Android version 1.6. You know that how is android 1.6 . So I want to upgrade my phone to gingerbread without any risk. I don't want my screen touch to run smoothly after update. So which ROM would be better for me? Do I have any risk again while I upgrade to gingerbread?
Here is my phone details:
Model number:x10i
Firmware version:1.6
Basebad version:1.0.14
Kernel version:2.6.29-rel [email protected] #2
Build number:R1FA014
My phone was x10a but after repair it's now x10i
I think that You can upgrade to gingerbread with SEUS. It doesn't work so smooth as android 1.6 or custom gingerbread ROM. but touchscreen should work normally
Sent from my X10i using xda app-developers app
SEUS said that software is up to date
choose here :
http://forum.xda-developers.com/showthread.php?t=1458001
all perfect rom...ics may have some problems but the other rom is very cool
hey
i would strongly recommend you to flash fxp125... rom it is the best out there with no bugs or fc's or wlod's
i flashed it on my sister's phone and she hasn't complained to me even once of the phone hanging....
plus it not as restricting as other rom's has many customization options....
VOILA
me.amar said:
I don't want my screen touch to run smoothly after update.
Click to expand...
Click to collapse
DUDE, your grammer... you should have said you want... not u dont want.:silly: